A Closer Look at the Tru Arc Tool Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-10-18 | A Closer Look at the Tru Arc Tool Woodturning with Sam Angelo
Notes from the Turning Shop December 2022 with Sam Angelo WYOMINGWOODTURNER 2022-12-14 | In this episode of his Notes' series, Sam answers questions and responds to comments from his recent videos. He reflects on tonight's Xmas Party for the Yellowstone Woodturner's Club.......and elections for P and VP. He announces another giveaway. The prize this month includes TWO small boxes: one is a sphere box made from a maple burl and the other is a Blackwood box with hand chased threads. This month's winner will be selected and announced HERE__________on DECEMBER 19TH!!!! Check this spot to see if you won.This month's GIVEAWAY rules are listed below..... The winner will be selected at random on DECEMBER 19TH.....Go back and check your comment to see if you won. AND check THIS spot for the name of the winner!!!!If you like my videos and want to support my channel....Buy Me a Coffee....click here: buymeacoffee.com/SamAngeloWatch the video "Worst video ever" by Sam. This was mentioned in the today's video. This was Sam's second video, and you might get a good laugh from it. Link below.youtube.com/watch?v=C-SD8bB0UsoAlso, Sam's very first video: TURNING A 24" BOWL ON THE LATHE youtube.com/watch?v=28dT77MCGZ4 Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sGiveaway Rules....for December 2022GIVEAWAY RULES FOR December 2022 ~To enter the contest-simply leave a comment ON THIS VIDEO!!! "Notes from the Turning shop" (Published December 14th, 2022) ~The Winner will be selected and contacted on December 19th-on the SAME comment the winner left. The winner’s name will also be listed ABOVE in the description area. GO BACK AND CHECK YOUR COMMENT---- to see if you won. ~The winner MUST RESPOND by December 24th, 2022 Respond by email to samandcheryle@gmail.com or text at 307-431-5395 If there is no response by December 24th, 2022 the winner will be disqualified, and a new winner will be selected and contacted. ~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube. Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner. Link to YouTube community guidelines: https://www.youtube.com/howyoutubewor...
Turning a Spirit Form Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-12-11 | Sam turns a small Ash container: spirit form. He takes you through the steps in making this small box and pays homage to the spirit within every work made by hand and heart.Ready for a loaded, American Beauty Lathe? I have one available to ship. Contact me at samandcheryle@gmail.com.Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Blending Oil Finishes for Wood Working Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-12-04 | Sam tackles the challenging topic of mixing oil finishes. Combining two or more finishes helps to control cost, and to develops a finish suited to a particular project.For more of Sam's videos on finishing-visit this playlist: youtube.com/watch?v=OqD7yzpJr_8&list=PLL5-IWEcq6B_GkvtBkGOISVklX8CsnhuvThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Repairing Woodturning projects with Sam Angelo WYOMINGWOODTURNER 2022-11-27 | In today's video Sam will work on 3 items that need repairing: a spatula, a small lidded box, and a walnut hollow form. The central focus of all three pieces will be methods of chucking them to his lathe so they can be turned safely. TIME CODES Just click on the time at the left of the topic and jump to that place in the video.00:00 INTRODUCTION01:32 Project # 1 the Spatula10:40 Project #2 The Quina box 15:49 The finished box 33:45 Project #3 The Walnut Hollow form39:45 CONCLUSION The Quina box shown in this video originally turned in the video-link below.Turning A LIDDED BURL BOX Link youtube.com/watch?v=Z8rzxLKG8mo Follow me on Instagram @ https://www.instagram.com/wyomingwood... and Facebook at facebook.com/samangeloturnerPlease subscribe and continue to watch my weekly videos.Buy me a coffee link.....Thanks for your support buymeacoffee.com/SamAngeloThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning or Drilling???? Lets See who Wins the Race Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-11-25 | Sam attempts to answer the "Age-Old" question about forming a recess-"Is drilling Better than Turning"? Watch the race between the two methods...*If you are looking for a great respirator, check out the Black Friday promotion by Parcil Safety. Just click this link for a "Buy one, Get one Free" deal: Link to Parcil Safetyparcilsafety.com/?utm_source=ParcilSafety&utm_campaign=BFD2022&utm_id=BF22&utm_term=WYOMINGWOODTURNER Check Out the Black Friday-2 for 1-deals at Parcil Safety (LINK ABOVE) This promotion runs from 11/25 until 11/18 Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning an End-Grain Bowl Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-11-20 | In this video, Sam turns a Box Elder-end grain bowl. He covers several tools which are options for removing wood from an end grain project. He encounters some "challenges" along the way which results in Sam just cutting this bowl in half...... Parts of this video uncovered some good lessons and one big FAIL!!!!! Have fun.Follow me on Instagram @ instagram.com/wyomingwoodturnet and Facebook at facebook.com/samangeloturnerPlease subscribe and continue to watch my weekly videos.Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop November 2022 Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-11-16 | "Notes from the Turning Shop" November 2022In this episode of his Notes' series, Sam answers questions and responds to comments from his recent videos and he announces another giveaway. The prize this month is a box with some exotic wood blanks ready to turn. This month's winner will be announce HERE__________on Nov 21stThis month's GIVEAWAY rules are listed below..... The winner will be selected at random on November 21st.....Go back and check your comment to see if you won. AND check THIS spot for the winner!!!!Link to: Turning a Lidded Burl Box- Mentioned in this video... youtube.com/watch?v=Z8rzxLKG8moIf you like my videos and want to support my channel....Buy Me a Coffee....click here: buymeacoffee.com/SamAngeloThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sGiveaway Rules....for November 2022GIVEAWAY RULES FOR November 2022 ~To enter the contest-simply leave a comment ON THIS VIDEO!!! "Notes from the Turning shop" (Published November 16, 2022) ~The Winner will be selected and contacted on November 21-on the SAME comment the winner left. The winner’s name will also be listed ABOVE in the description area. GO BACK AND CHECK YOUR COMMENT---- to see if you won. ~The winner MUST RESPOND by November 26th, 2022 Respond by email to samandcheryle@gmail.com or text at 307-431-5395 If there is no response by November 26th, 2022 the winner will be disqualified, and a new winner will be selected and contacted. ~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube. Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner. Link to YouTube community guidelines: https://www.youtube.com/howyoutubewor...
The True Cost of Tung Oil Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-11-13 | In this video Sam concludes that while the cost of Tung Oil is not too great compared to other finishes-True Tung oil takes a long time to dry and may NOT be the best finish for a lathe-turned project. When using tung oil, a polymerized oil is the way to go. Follow me on Instagram @ https://www.instagram.com/wyomingwood...and Facebook at facebook.com/samangeloturnerPlease subscribe and continue to watch my weekly videos.Buy me a coffee link.....Thanks for your support buymeacoffee.com/SamAngeloThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Basket Illusion Basics Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-11-06 | In this, my first attempt at a Basket Illusion, I keep the design simple. I cover all the basic elements of making this piece including how I turned the small platter and prepared it for forming the beads and for coloring. See links below for Doug Schneiter's website and for his basket illusion kit. Follow me on Instagram @ instagram.com/wyomingwoodturnet and Facebook at facebook.com/samangeloturnerPlease subscribe and continue to watch my weekly videos.Links: Doug's website dougschneiter.comDoug's email address dougschneiter@gmail.comIndexing plate and kit dougschneiter.com/services/#products Dick Blick website-markers link dickblick.com/categories/drawing/markers/brush/?gclid=Cj0KCQjw--2aBhD5ARIsALiRlwCcVmQFtaYCfU7LMQflJckQVZBfLdrn0IdcZx3WuNoZc9mkMmXWyhQaAmaUEALw_wcBBasket illusion timecodes 00:00 Introduction01:10 Basket illusion explained/markers/design04:10 Indexing wheel and set up09:43 Work on the rim of the project 10:58 Beading the rim16:55 Marking the lines on the rim 19:55 Burning the lines 26:24 More on my design31:50 Circular graph paper32:49 Turning the Platter42:00 Decorating the bottom of the platter 45:00 Applying a finish on the bottom50:00 Finish turning the top of the piece54:00 ConclusionInterested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com or call 307-431-5395 Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
A Green Turned ELM Bowl Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-10-30 | One option in woodturning is to complete a bowl from green or wet wood. This approach requires that the bowl is turned thin which helps to prevent the wood from cracking or developing splits while drying. Sam will cover how he turns the bowl but also how the completed bowl is dried and stored safely to prevent drying issues. Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com or call 307-431-5395 Buy me a coffee link.....Thanks for your support buymeacoffee.com/SamAngeloThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Rough-Turning and Drying Wood ......the Essentials Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-10-23 | Rough-turning bowls is one of Sam's favorite approaches in woodturning. He rough-turns a nice piece of Koa wood to about 7/8" wall thickness-he then shows how he dries the bowl blank by storing it in shavings within a paper bag. Thanks to the viewer who sent me this lovely piece of wood, Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com or call 307-431-5395 Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop October 2022 with Sam Angelo WYOMINGWOODTURNER 2022-10-16 | The GIVEAWAY this month is a Robust tool rest so leave a comment to enter. John Mullins is this Month's Notes' winner!!!!!! Contact me John at samandcheryle@gmail.com I will get your address and talk about which tool rest you would like... 😃 Sam "Notes from the Turning Shop" October 2022In this episode of his Notes' series, Sam answers questions and responds to comments from his recent videos and he announces another giveaway. The prize this month is a Robust Tool rest OF YOUR CHOOSING.This month's GIVEAWAY rules are listed below..... The winner will be selected at random on October 21st.....Go back and check your comment to see if you won. AND check THIS spot for the winner!!!!If you like my videos and want to support my channel....Buy Me a Coffee....click here: buymeacoffee.com/SamAngeloRobust tool rests I have in my stock- First column is size O3-LP-SD 04-LP-SD06-LP-SD12-LP-SD12-CR-LO09-LP-LOO4-LP-LOLP is Low profileCR is comfort restSD is 4 inch postLO is 5 1/4inch longer post IMPORTANT NEWS!!!!!! Interested in a Robust, American Beauty lathe. I have a "Stock Lathe" ready to be shipped. Contact me for details at samandcheryle@gmail.com or call 307-431-5395 SamImportant links-mentioned in this videoLink to Minwax "Tung oil Finish" Walmartwalmart.com/ip/Minwax-67500-1-qt-Tung-Oil-Finish-Clear/44692378Yellowstone Woodturners Club-please like facebook.com/turners18Doug Schneiter's websitedougschneiter.com Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s"NOTES" giveaway rules: GIVEAWAY RULES FOR October 2022 ~To enter the contest-simply leave a comment ON THIS VIDEO!!! "Notes from the Turning shop" (Published October 16, 2022) ~The Winner will be selected and contacted on October 21-on the SAME comment the winner left. The winner’s name will also be listed ABOVE in the description area. GO BACK AND CHECK YOUR COMMENT---- to see if you won. ~The winner MUST RESPOND by October 26th , 2022 Respond by email to samandcheryle@gmail.com or text at 307-431-5395 If there is no response by October 26th , 2022 the winner will be disqualified, and a new winner will be selected and contacted. ~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube. Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner. Link to YouTube community guidelines: https://www.youtube.com/howyoutubewor...
Turning a Cherry Bowl (Part 2) Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-10-09 | Part 2Sam finishes his cherry bowl by working on the top of the piece. Hw adds a bit more texturing and then continues with his theme of using scrapers.... See time codes below to go quickly to your favorite topic. Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com or call 307-431-5395 Timecodes for Part 2 Chapter timecodes-click on the time to jump to the desired topic. 00:00 Introduction00:40 At the lathe-explanation of the project01:30 Designing the top of the blank/working on the rim07:23 Texturing the rim10:20 Removing wood from the inside of the bowl13:15 Undercutting the rim with hollowing tools17:45 Removing the tailstock support22:25 Finishing cuts and scraping26:38 Establishing the thickness of the bottom29:45 A little sanding-finishing31:00 CONCLUSION Thanks for watchingThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning a Cherry Bowl (Part 1) Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-10-02 | Part 1 ~ Turning the Bottom of a Cherry BowlIn this video Sam begins to turn a dry cherry bowl. In this video-Part 1-he starts with the underside of the bowl and establish an expansion recess and applies a finish. In Part 2 he will turn the top of the bowl and continue to focus on his scraping technique. See the timecodes below to see your favorite topic....Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com or call 307-431-5395 Chapter timecodes-click on the time to jump to the desired topic. 00:00 Introduction00:22 Cutting up the bowl blank at the bandsaw01:00 Drilling at the drill press for the screw chuck02:10 Mounting the bowl blank on a screw chuck04:25 The turning begins…05:00 Marking and turning the tenon06:12 Truing up the blank09:00 A little about form and design10:00 Focus on scraping12:28 Forming the expansion recess17:50 Shaping the ogee on the underside of the bowl19:15 Dealing with torn grain21:18 The push cut to clean up the surface25:21 Scraping the underside of the piece29:35 SANDING!!!!29:55 Adding a bit of texturing31:00 Applying a finish31:49 Conclusion See part 2 next week Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Coring a Box Elder Burl with Sam Angelo WYOMINGWOODTURNER 2022-09-25 | After his local club took down and cut up a fairly large box elder tree, Sam received a nice piece of burl from the base of the tree. The challenge was to make use of this nice burl wood as well as share it with Jerry who was a big part of cutting up this tree. See timecodes below to find your favorite topics....Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com or call 307-431-5395 Chapter timecodes-click on the time to jump to the desired topic. 00:00 Introduction01:43 measuring the moisture content of the Burl wood 03:04 How I plan to cut up the Burl04:46 At the bandsaw with Jerry07:54 Mounting the blank on a lathe with a face plate10:21 The turning begins12:10 Forming the tenon 16:49 Reversing the blank18:36 The Coring begins 28:20 Truing up the biggest bowl 29:53 Conclusion 31:53 Showing off the cored bowl blanks 32:00 A little bonus footage Thanks for watching Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
A Small Ornamental Container Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-09-18 | Sam turns a small box or container made from Macassar Ebony. It has a threaded connection. Sam details the turning process and shows some different ways to chuck up the lid and then the base. Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com or call 307-431-5395 Thread Chasing videos: youtube.com/playlist?list=PLL5-IWEcq6B9UA1YSW19pZGTanviEKNTyBoxes....playlist youtube.com/playlist?list=PLL5-IWEcq6B_t2c9Pk9taF1qvMcsTGYclThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop September 2022 with Sam Angelo WYOMINGWOODTURNER 2022-09-11 | Gary Walter is the September NOTES' winner-Congrats!!!! "Notes from the Turning Shop" September 2022In this episode of his Notes' series, Sam answers questions and responds to comments from his recent videos and he announces another giveaway. The prize this month is a packet of Ack's wood finishing Abrasive paste and polishing compound AND one of Sam's colored bowls. This month's GIVEAWAY rules are listed below..... Go back and check your comment on September 16 to see if you won. AND check THIS spot for the winner!!!!Links to those vendors who donated to the Yellowstone Woodturning Symposium:carterandsontoolworks.com ronbrownsbest.com/index.php?route=common/home www.turnrobust.com ackswoodpaste.comhttp://www.nilesbottlestoppers.comwww.woodturnerscatalog.comhelenahardwoods.com woodturner.org woodworkersemporium.comtreelineusa.com/contacts DCox@klingspor.comcustservice@dickblick.comcph@starbond.comsales@packardwoodworks.comahturf.com If you like my videos and want to support my channel....Buy Me a Coffee....click here: buymeacoffee.com/SamAngeloIMPORTANT NEWS!!!!!! Interested in a Robust, American Beauty lathe. I have a "Stock Lathe" ready to be shipped. Contact me for details: samandcheryle@gmail.com SamThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s"NOTES" giveaway rules: GIVEAWAY RULES FOR September 2022 ~To enter the contest-simply leave a comment ON THIS VIDEO!!! "Notes from the Turning shop" (Published September 11, 2022) ~The Winner will be selected and contacted on September 16th-on the same comment the winner left. The winner’s name will also be listed ABOVE in the description area. GO BACK AND CHECK YOUR COMMENT---- to see if you won. ~The winner MUST RESPOND by September 21st, 2022 Respond by email to samandcheryle@gmail.com or text at 307-431-5395 If there is no response by September 21st, the winner will be disqualified, a new winner will be selected and contacted. ~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube. Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner. Link to YouTube community guidelines: https://www.youtube.com/howyoutubewor...
Completing Various Elements of Hollow Forms-Continued -Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-09-04 | Sam continues to work on various unfinished hollow forms-he will focus on Airbrushing and Reverse Chucking in this video. Sam also shows off photos of several of these hollow forms he has completed during the making of this video. Sam shows some "embellishing" techniques that can be applied to other woodturning projects. (2)Chapter Timecodes are available below so the viewer can click on the time and jump to the desired topic.00:00 Introduction00:22 The video explained01:16 Airbrushing set up 02:24 Dyes for airbrushing03:46 Airbrushing begins 06:53 The piece colored 06:50 The finished piece 07:28 Cleaning the airbrush 08:50 More airbrushing11:56 Airbrush paints17:46 Sealing and finishing 18:26 The SECOND hollow form colored19:00 Reverse chucking a hollow form22:50 Finishing the foot23:10 Conclusion 23:30 The completed hollow formBlending Embellishments/Playlist Link youtube.com/watch?v=cCaXt6lZiow&list=PLL5-IWEcq6B9Ip2uaCOJKpBZWCqCxp26gThread Chasing playlist: youtube.com/playlist?list=PLL5-IWEcq6B9UA1YSW19pZGTanviEKNTyDecorating w/Coloring, texture,fire,carvingyoutube.com/watch?v=cCaXt6lZiow&list=PLL5-IWEcq6B9N1jEYTClHCV2fM5UlTl56 Stewart MacDonald dyes: link tinyurl.com/y9sfzdsrIwata Airbrushes Hobby Lobbyhobbylobby.com/search/?text=iwata+airbrushAirbrush cleaning pot: tinyurl.com/ycxefhj4 Chestnut stains woodturnerscatalog.com/p/148/6338/chestnut-Spirit-StainTypical airbrush paints.... link dickblick.com/categories/painting/airbrushing/paint/?gclid=CjwKCAjw6fyXBhBgEiwAhhiZsotQT_yKuE-wRjnewXzVtc2UqftxHuv_JjWvgS7Kr0x3y4vDb1XPaBoCvYgQAvD_BwEThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Completing Various Elements of Hollow Forms Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-08-28 | In today's video, Sam will complete various unfinished hollow forms that he will sell as burial urns. He shows how he colors a piece from the inside and also turns and finishes a blackwood lid. These "embellishing" techniques can be applied to other woodturning projects. (1) Chapter Timecodes are available below so the viewer can click on the time and jump to the desired topic.00:00 Introduction00:42 Scope of this video explained 04:08 Cutting back the color with sandpaper06:49 Coloring from the inside14:07 Device to hold hollow form between centers-shown16:15 List of Topics to be covered18:00 Work on the lid/handle20:00 Detailed work on the lid 22:50 The finished piece-photo23:00 ConclusionSome of these links will be covered in this video OR...the next video which continues the topic on Hollow forms. Blending Embellishments/Playlist Link youtube.com/watch?v=cCaXt6lZiow&list=PLL5-IWEcq6B9Ip2uaCOJKpBZWCqCxp26gThread Chasing playlist: youtube.com/playlist?list=PLL5-IWEcq6B9UA1YSW19pZGTanviEKNTyDecorating w/Coloring, texture,fire,carvingyoutube.com/watch?v=cCaXt6lZiow&list=PLL5-IWEcq6B9N1jEYTClHCV2fM5UlTl56 Stewart MacDonald dyes: link tinyurl.com/y9sfzdsrIwata Airbrushes Hobby Lobbyhobbylobby.com/search/?text=iwata+airbrushAirbrush cleaning pot: tinyurl.com/ycxefhj4 Chestnut stains woodturnerscatalog.com/p/148/6338/chestnut-Spirit-StainThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turned Koa Box with an Alternative Ivory Threaded Insert with Sam Angelo WYOMINGWOODTURNER 2022-08-21 | Sam turns a 2" X 2" X 4" blank of Koa given to him by his friend Dave. He spices things up with an alternative ivory lid detail that is threaded onto a brass rod. He also gives credit for the design of the box to John Berkeley-British turner and thread chaser. Lots of material covered in this video,,,, To save time- See the chapter timecodes below to jump to various topics in this detailed video.Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com Buy me a coffee link.....Thanks for your support buymeacoffee.com/SamAngeloChapter timecodes: Click on the time and jump to the topic listed.00:00 Introduction01:09 Chucking up the blank05:25 Forming the tenon06:40 How the blank is chucked up09:10 Shaping the blanks13:53 Parting the base from the lid15:36 Hollowing out the lid17:15 Connecting the base and lit20:00 Completing the inside of the lid 24:45 Drilling the depth hole27:06 Final shaping on the lid 31:30 Applying a finish to the lid32:43 Hollowing the base35:48 Fine tuning the connection of the lid to the base37:07 The lid detail explained38:45 Drilling the lid for the brass rod39:46 Drilling and taping the Alternative ivory “flower”43:50 Chasing threads in the brass rod 46:31 Final work on the flower-texturing and applying gilt creamThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Look youtube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop August 2022 Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-08-14 | ****This month's winners are1st prize The Angry Woodturner2md prize Roberta KickCONGRATULATIONS TO BOTH OF YOU send me an email at samandcheryle@gmail.com August 2022 Notes from the turning shop-As always-a big GIVEAWAY!!!!! This time--- two winners!!!!! To enter LEAVE A COMMENT!!!In this episode of his Notes' series, Sam answers questions and responds to comments from his recent videos and he announces another giveaway. The prizes this month are a small hackberry-natural edge bowl and 2 small threaded pieces from Sam's collection.The winner will be selected on August 19th and the name will be announced HERE.See NOTES' Giveaway rules below.....Just leave a comment to enter.********Jim Balz was July's Notes winner-congrats Jim********Buy Me a Coffee....click here: buymeacoffee.com/SamAngeloIMPORTANT NEWS!!!!!! Interested in a Robust, American Beauty lathe. I have a "Stock Lathe" ready to be shipped. Contact me for details: samandcheryle@gmail.com Sam"NOTES" giveaway rules: GIVEAWAY RULES FOR August 2022 ~To enter the contest-simply leave a comment ON THIS VIDEO!!! "Notes from the Turning shop" (Published August 14, 2022) ~The Winner(s) will be selected and contacted on August 19th-on the same comment the winner left. The winner’s name will also be listed ABOVE in the description area. GO BACK AND CHECK YOUR COMMENT---- to see if you won. ~The winner MUST RESPOND by August 24'th, 2022 Respond by email to samandcheryle@gmail.com or text at 307-431-5395 If there is no response by August 24'th, the winner will be disqualified, a new winner will be selected and contacted. ~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube. Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner. Link to YouTube community guidelines: https://www.youtube.com/howyoutubewor...Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Robust Tools American Beauty Lathe. ~Stock lathe Program~ with Sam Angelo WYOMINGWOODTURNER 2022-08-14 | Interested in an American Beauty Lathe? In this video, Sam explains the Robust Tool's "Stock Lathe Program" in which he has 2 "loaded", American Beauty lathes completed and ready for purchase.These lathes are made in America and comes with a 7 year warranty.Each lathe includes....- the 3 HP motor upgrade-The tiltaway tailstock feature with Gas Shock Send me a comment or question via e-mail: @---- samandcheryle@gmail.com or call with questions: 307.431.5395 I am an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Natural Edge Hackberry Bowl~ Balancing the Bark Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-08-07 | Sam turns a Natural Edge bowl from Hackberry. He starts by showing a "prototype" -which he had turned previously- as a model for the bowl turned in this video. He shows how he deals with the challenge of starting with a very uneven surface. For more videos on turning Natural edge bowls, see the playlists below.Interested in a Robust, American Beauty lathe? I have one ready to ship in the "dealer stock" lathe program. Contact me for details: samandcheryle@gmail.com Buy me a coffee link.....Thanks for your support buymeacoffee.com/SamAngeloNatural edge bowls Playlist 1)youtube.com/watch?v=xwti9yqa5m0&list=PLL5-IWEcq6B_mARE07x40zXEOXkPYK7uINatural edge bowls Playlist 2)youtube.com/watch?v=xwti9yqa5m0&list=PLL5-IWEcq6B976cu7sOgzzEFDIxOSBiXEThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-07-31 | July 2022Notes from the turning shop-As always-a big GIVEAWAY!!!!!In this episode of his Notes' series, Sam answers questions and responds to comments from his recent videos. He shows off clips from recent videos and announces another giveaway. The prize this month is a piece of HSS, an ash tool handle blank, and a ferrule-all for making a tool. See NOTES' Giveaway rules at the end of this video.....Just leave a comment to enter.********Jim Balz is this month's Notes winner-congrats Jim********Buy Me a Coffee....click here: buymeacoffee.com/SamAngeloIMPORTANT NEWS!!!!!! Interested in a Robust, American Beauty lathe. I have a "Stock Lathe" ready to be shipped. Contact me for details: samandcheryle@gmail.com SamLinks mentioned in this video:Turning a Keepsake Urnyoutube.com/watch?v=6sXA7vXH-zU&t=2sWet sanding video youtube.com/watch?v=Mzl-wJTRtBg&t=727sExpansion Recess or Compression Tenon in Woodturning? video-youtube.com/watch?v=QpeBz5cSpt4&t=73sE.F. Woodturning----Check out this young turneryoutube.com/channel/UCwwyx8PFUJiVf8SiZyMPjew~ACK's Paste Link to his webpage.....ackswoodpaste.comThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s"NOTES" giveaway rules: GIVEAWAY RULES FOR July 2022 ~To enter the contest-simply leave a comment ON THIS VIDEO!!! "Notes from the Turning shop" (Published July 31, 2022) ~The Winner(s) will be selected and contacted on August 5th-on the same comment the winner left. The winner’s name will also be listed ABOVE in the description area. GO BACK AND CHECK YOUR COMMENT---- to see if you won. ~The winner MUST RESPOND by August 10th, 2022 Respond by email to samandcheryle@gmail.com or text at 307-431-5395 If there is no response by August 10th, the winner will be disqualified, a new winner will be selected and contacted. ~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube. Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner. Link to YouTube community guidelines: https://www.youtube.com/howyoutubewor...
Woodturning Tools and Handles with Sam Angelo WYOMINGWOODTURNER 2022-07-24 | In this video Sam shows tools he made from HSS that he purchased on the internet (link below). He makes a tool handle from Lignum vitae for a 1" scraper, then grinds and shapes the cutting edge. He also shows the scraper in action. Finally he previews his next "Notes from the Turning Shop" giveaway---which will include: 1/2" X 1/2" tool steel, ash wood for a handle and a ferrule. That "Notes" video to be published on July 31. Buy Me a Coffee~ link: buymeacoffee.com/SamAngeloLinks mentioned in the video: Tool Handle for Box Scraper youtube.com/watch?v=70zpTB63IuE&t=8sRobert Sorby HF19B Set of 10 Each 19 mm / 3/4 Inch Solid Brass Ferrulesamazon.com/gp/product/B07QM1N98B/ref=ppx_yo_dt_b_asin_title_o03_s00?ie=UTF8&psc=1 HSS Lathe Tool Bit 12mm x 12mm x 200mm, Square Lathe Turning Tool Blanks,amazon.com/gp/product/B09NRJRG7Z/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1Tool Sharpening Set-up on the Wood Latheyoutube.com/watch?v=B_rQyUjNBsU&t=548sIf you are interested in purchasing my work, visit my ETSY shop: etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com For information on woodturning classes or my past demonstrations, visit: http://www.wyomingwoodturner.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. samandcheryle@gmail.com Interested in a Robust Lathe-watch my videos below on these fine, American made machines. The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning a Keepsake Urn Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-07-17 | In this video Sam takes you Step by Step through the process of making a small Keepsake or Token urn. He turns a beautiful piece of Tasmanian Acacia with a Macassar Ebony lid-which has hand cut threads-connecting it to the base. He covers hollowing, design, and a bit on chasing threads by hand. See links below for more hollowing videos by Sam: Playlist on Hollowing: youtube.com/playlist?list=PLL5-IWEcq6B-jhtk1uGtMG4RcdWHwRLpp More hollowing videos: Hollowing basics- youtube.com/watch?v=uO25UKbuNoM&t=649sSmall Hollow form: youtube.com/watch?v=9otdcK3F2zw&t=12sTools for Hollowing: youtube.com/watch?v=YrdSz6eq5ks&t=554sMore videos on my YouTube channel-youtube.com/channel/UCRZxyT3UUS8spkIZDAsaFnAIf you are interested in purchasing my work, visit my ETSY shop: etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com For information on woodturning classes or my past demonstrations, visit: http://www.wyomingwoodturner.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. samandcheryle@gmail.com Interested in a Robust Lathe-watch my videos below on these fine, American made machines. The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turn an Apple Plate for the Kitchen Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-07-10 | Sam turns a small plate-or is it a dish-nevertheless, this is a fun video with a visit from Hillbilly man and Cool guy. And what exactly goes in to a jam sandwich???? This video will answer many important questions. The challenge is to turn something you can use in your kitchen. If you like this video, buy Sam a Coffee....@ buymeacoffee.com/SamAngelo Chapter TimeCodes: Just click on the time to jump to the topic listed. 00:00 Introduction00:19 The return of Hillbilly man!!!!01:18 The project begins01:56 Mounting the blank on a screw chuck04:08 Truing up the blank with a bowl gouge05:15 Using an expansion recess to mount the blank07:12 Forming the recess for 3” chuck jaws10:10 Shaping the outside of the plate12:22 Reverse-chucking the plate into chuck jaws13:30 Truing up the top of the piece14:00 Hollowing 14:15 What IS a jam sandwich? This question is answered…15:30 Continue with a bottom feeder gouge to the final depth16:21 Using a NRS on the bottom of the plate 16:56 Applying a finish17:23 Conclusion and photos Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Natural Edge Bowl ~~Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-07-03 | Sam silently turns a Bark Edge bowl......In this video Sam will show how he completes a rough-turned Natural Edge bowl-made from Honey Locust. He does not narrate this video but simply shows some excellent close-ups of his tool work and turning this bark edge bowl. Oh, and there is no music~ "Turning the intermittent edge is not that difficult." You can show your support for my YT videos-Buy me a cup of coffeeJust click this link: Thanks Sam Angelobuymeacoffee.com/SamAngeloChapter TimeCodes: Click on the time and jump to the topic listed00:00 Introduction00:24 Truing up the drive block00:44 Working on the outside of the piece and Forming the tenon01:26 Truing up the outside of the bowl to the rim02:16 Shear scraping the outside of the bowl03:05 Final work on the spigot with a point tool03:30 Using a Negative Rake Scraper (NRS) on the outside04:35 Beginning the finishing with an oil blend04:55 A shot of the finished bowl05:10 The first Reverse chucking05:40 Begin work on the inside of the bowl06:55 Using the bottom feeder07:47 Cleaning up with a NRS 08:38 SANDING!!! Yikes09:18 Preparation for finishing by cleaning the surface with paint thinner09:32 Applying an oil finish10:10 Final REVERSE CHUCKING10:26 Work on the foot10:43 Sanding and finishing11:25 Cutting off and sawing off the “nub”11:48 Conclusion and showing off the finished pieceMy Playlist on Natural Edge Bowls: youtube.com/playlist?list=PLL5-IWEcq6B976cu7sOgzzEFDIxOSBiXEThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Cruise to Alaska and Glacier Bay with Sam Angelo June 2022 WYOMINGWOODTURNER 2022-07-01 | Mid-week video on our cruise to Alaska-June 2022This a short pictorial view of our recent cruise to Alaska.....enjoyRegular weekly woodturning video out on Sunday. Thanks for watching my videos and for your support!!!Buy Me a Coffee~ link: buymeacoffee.com/SamAngeloThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Fast RACER ~TURNED OFF-CENTER Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-06-26 | Inspired by Richard Raffan's DVD and book, "Turning Toys," Sam turns a sporty racing car for his granddaughter's second birthday. In this video Sam and Cheryle both turn some drivers for the racer. You will also see some off-center turning-texturing and coloring of both the drivers and the wheels. Now go turn a toy for a kid....You can show your support for my YT videos-Buy me a cup of coffeeJust click this link: Thanks Sam Angelobuymeacoffee.com/SamAngeloFast Racer Chapter TimeCodes: Just click on the time and jump to the topic listed. 00:00 INTRODUCTION00:27 The Project Explained00:40 Photo of the finished car with Drivers00:46 Shout out to Richard Raffan (Turning toys-DVD and Book)02:07 Laying out the Car blanks 05:45 At the bandsaw07:08 Drilling at the Drill press08:42 Turning on the lathe16:08 Turning off center21:51 Drilling the wheels23:50 Turning the wheels29:11 Texturing a wheel/coloring33:07 Turning the drivers33:10 Cheryle turns a driver37:34 Sam turns a driver44:08 Conclusion with photos Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning a Box Elder Burl into Art with Sam Angelo WYOMINGWOODTURNER 2022-06-19 | Box Elder display artSam is challenged to create something from a piece of Box Elder burl. Watch as he turns it into something other than another bowl. The result is an artistic display piece on a Padauk stand. This adventure forces him make several "design" detours along the way. He adds a bit of inlay in the center and some coloring around the rim.You can show your support for my YT videos-Buy me a cup of coffeeJust click this link: Thanks Sam Angelobuymeacoffee.com/SamAngeloChapter timeCodes: Click on the time and jump to the topic listed00:00 Introduction00:34 The project explained02:07 Chucking the odd shaped burl between a drive block And live center04:05 The turning begins06:49 Removing wood from the center11:37 Repositioning the live center by removing the Center bit of wood16:10 Sam removes the piece from the lathe to re-evaluate the project22:16 Work on the workbench with inlay25:31 Carving with a Merlin 227:09 More Turquoise inlay on the workbench29:55 Burning the rim of the piece32:07 Applying gilt cream on the rim39:44 Showing off the “nearly” finished piece41:10 Cutting the base on the bandsaw And conclusionThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
The Amazing Hollowing Stabilizer: A closer look with Sam Angelo WYOMINGWOODTURNER 2022-06-15 | Sam puts the Amazing Hollowing Stabilizer through its passes. He shows how he sets up this device on his own lathe that has a 16" swing-and shows some important options for making this tool work best for you. Finally he turns the inside of a bowl and a hollow form using various turning tools. A must see video if you are looking to purchase this really amazing hollower.See important links below.Buy Me a Coffee~ link: buymeacoffee.com/SamAngeloRon Brown's website-Website: ronbrownsbest.com/index.php?route=common/homeThe stabilizer Video by Ron Brown youtube.com/watch?v=x7S_GVUFqQY&t=163sLink to the Hollowing Stabilizer ronbrownsbest.com/index.php?route=product/category&path=50&pages=1-1#p884Ron Brown contact information email ronbrown@coolhammers.com office phone: (770)962-3821.Link to the contact page for RONBROWN'SBEST ronbrownsbest.com/index.php?route=information/contactThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning a Basic Bowl on the Wood Lathe with Sam Angelo WYOMINGWOODTURNER 2022-06-12 | Through a step-by-step process, Sam provides options for turning this maple bowl from the initial chucking, to the final finishing. He helps the viewer decide on the best procedure for turning a bowl by showing his own methods.Making good decisions while turning a bowl is an important element for success. A good video for students and for those teaching the craft of woodturning.You can show your support for my YT videos-Buy me a cup of coffeeJust click this link: Thanks Sam Angelobuymeacoffee.com/SamAngeloChapter Timestamps-Click on the time and jump to the topic listed00:00 Introduction01:36 The project explained02:24 Chucking methods for this bowl04:51 Using a faceplate-at the lathe!!!07:20 Level the bottom and sides09:22 Marking the tenon for chuck jaws14:23 Reverse chucking to hollow out the inside16:10 Hollowing the inside21:14 Sanding with a drill and applying the first coat of finish23:38 Reversing the bowl to address the foot: options 34:00 Turning away the foot and finishing the outside of the bowl36:25 Applying an oil finish39:35 Final cuts on the bottom40:28 ConclusionThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop June 2022 Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-06-05 | JUNE 2022Notes from the turning shop-with a big GIVEAWAY!!!!!In this addition to his Notes' series, Sam answers questions and responds to comments from his recent his videos. He previews some future videos, shows off his recent turned work and announces another giveaway. The prize this month is a set of Abrasive and polishing paste from ACK's Paste. Please see the link below if you wish to order.GLEN CRANDALL IS THE NOTES GIVEAWAY WINNER.....IF YOU KNOW GLEN, LET HIM KNOW.....Great job Glen SamBuy Me a Coffee....click here: buymeacoffee.com/SamAngeloLinks mentioned in this video:~ACK's Paste Link to his webpage.....ackswoodpaste.com~My NRS Video The ULTIMATE Guide to the Negative Rake Scraper youtube.com/watch?v=wYjbji5hARc&t=61sIt works now.....~Finishes and finishing PDF file http://www.wyomingwoodturner.com/pdfs/FinishingchartPDF2022forDemonstrationsupdateJan2021.pdf "NOTES" giveaway rules: GIVEAWAY RULES FOR June, 2022~To enter the contest-simply leave a comment ON THIS VIDEO!!!"Notes from the Turning shop" (Published JUNE 5th 2022) ~The Winner(s) will be selected and contacted on JUNE 9th-on the same comment the winner left. It will also be listed ABOVE in the description area. GO BACK AND CHECK YOUR COMMENT---- to see if you won.~The winner MUST RESPOND by June 14, 2022 Respond by email to samandcheryle@gmail.com or text at 307-431-5395 If there is no response by JUNE 14th, the winner will be disqualified, a new winner will be selected and contacted.~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner.Link to YouTube community guidelines: https://www.youtube.com/howyoutubewor... Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
The ULTIMATE Guide to the Negative Rake Scraper Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-05-29 | Sam takes a close look at 3 categories of (NRS) Negative Rake Scrapers: NRS's with two symmetrical bevels, Specialty scrapers, and NRS's with a round end. He shows tools from each category, sharpens a few, and demonstrates using these tools in various turning situations. To view your favorite topic, check out the time codes below-just click on the time to the left of the topic.You can show your support for my YT videos-Buy me a cup of coffeeJust click this link: Thanks Sam Angelobuymeacoffee.com/SamAngeloTimeCode-chapters00:00 Introduction *Tools/sharpening/ turning with each01:58 Geometry of scrapers03:38 Examples of “symmetrical” scrapers04:45 Turning with scrapers with a symmetrical grind13:11 Sharpening scrapers with a symmetrical grind15:32 Round Nose scrapers *Examples of these scrapers18:14 Turning with round nose scrapers24:39 Sharpening Round nose (NRS’s) scrapers27:02 The optimum angles for a NRS28:05 Examples of “specialty” scrapers31:26 Using specialty scrapers in a turning situation41:17 Sharpening some specialty scrapersConclusion and thanksIf you have an interest in purchasing an American made Robust lathe-contact me at samandcheryle@gmail.com Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop May 2022 Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-05-22 | Sam once again responds to questions and comments over his recent videos. He shows off some recent work, mentions some upcoming videos and once again has a giveaway-see the video for the prize-DARREL ROE is the May Notes from the Turning Shop!!!!Congratulations to Darrelrules and details for entering below. The winner of the April NOTES' video prize giveaway is Mike Peace-well deserved for all his work on his videos and demonstrating.....Congrats!!!Timecodes: Click on the time and jump to the topic listed 00:00 INTRODUCTION00:58 APRIL WINNER-MIKE PEACE02:08 FUTURE AND PAST VIDEOS ON MY CHANNEL02:36 WHAT I HAVE BEEN WORKING ON….03:55 FAST RACER….FUTURE VIDEOs06:35 YELLOWSTONE WOODTURNERS-MENTION OF NEW MEMBER08:00 COMMENTS AND QUESTIONS----11:27 May GIVEAWAY PRIZE!!!! MUST SEE13:16 GIVEAWAY RULES13:30 MORE Q & A21:20 The Last comment22:06 Conclusion and thanks for watchingGIVEAWAY RULES FOR MAY 2022"Notes from the Turning shop" (Published May 22nd) Giveaway rules: ~To enter the contest-simply leave a comment ON THIS VIDEO!!!~The Winner(s) will be selected and contacted on May 27TH on the same comment the winner left. It will also be listed ABOVE in the description area. GO BACK AND CHECK YOUR COMMENT---- to see if you won.~The winner MUST respond by June 1st, 2022 Respond by email to samandcheryle@gmail.com If there is no response by May 4th, the winner will be disqualified, a new winner will be selected and contacted.~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner.Link to YouTube community guidelines: https://www.youtube.com/howyoutubewor... Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY https://www.etsy.com/shop/wyomingwood... Send me a comment or question via e-mail: @---- samandcheryle@gmail.com Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Salt and Pepper Cellars with a Swinging Lid (new design) Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-05-15 | Sam turns a salt and pepper cellar set with swinging lids. This is a gift for his son and daughter-in-law. The video is a step-by-step process for turning a cellar that could be used for any spices. The location of the pivot point and 1/2 rare earth magnet may be a totally new approach for the swinging lid's design. Video details include gluing up the base, shaping the lid and turning the bottom of the piece.Check out the chapter "time stamps" below to locate each topic for completing this project.Chapter Timestamps-Click on the time and jump to the topic listed00:00 Introduction02:15 The project explained03:30 Planning the project details08:32 Cutting the cherry parts for the base11:10 Gluing the base together15:59 Template for the lid18:24 Turning the bottom of the base at the lathe23:00 Profiling the outside of the base25:30 Grain direction for this project28:46 Working on the lid33:35 Routing a round over on the lid36:50 Finishing the lid and base37:10 Conclusion and more photos of the finished projectsIf you are interested in an American Beauty Lathe, please contact me at samandcheryle@gmail.com for detailsThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Sealing and Finishing with Shellac, Lacquer, Oil Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-05-08 | In this video Sam Angelo looks at sealing and applying finishes to a utilitarian piece and a decorative piece. He also shows two smaller items that require different approaches. Sam compares his application of spray lacquer, friction polish and examples of how he seals each. He also reviews his use of Sam Maloof's oil mixture. A blend easily mixed up in your own workshop. Below is the formula:From the book Sam Maloof, Woodworking (p.68)This finish is applied in two stages:Step~One-Equal parts • Boiled Linseed Oil • Raw Tung Oil• Urethane varnish (semi-gloss)Step two~Equal Parts • Boiled Linseed Oil• Raw Tung Oil• Shredded beeswax PDF File on finishes-good stuff (Clicking this link may open a page outside of YouTube).....http://www.wyomingwoodturner.com/pdfs/FinishingchartPDF2022forDemonstrationsupdateJan2021.pdfTime Stamp chapters: Click on the time and jump to the topic found in the video00:00 Introduction00:40 Comments on sealing and finishing03:08 Applying finish to a Box elder bowl04:54 Decorative Madrone project07:40 Cleaning the surface in preparation for applying a spray lacquer10:30 Sam explains his approach to sealing wood12:58 Sealing and spraying lacquer14:51 Brush on lacquer on pink ivory blank16:58 Macassar Ebony and shellac and friction polish20:42 Return to the Box elder bowl for more finishing22:30 Reversing the bowl to work on the underside26:40 Sealing explained 30:00 Sam Maloof oil blend 35:56 Applying finish to the large bowl39:04 Sam’s thoughts on adding beeswax39:49 Conclusion ~~~~Thanks for watchingFor more information on a Robust lathe, email me at samandcheryle@gmail.com Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning an Ancient Wooden Pottery Jug.....with a Plug Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-05-01 | Sam transforms an amazing piece of Myrtle burl wood into a different and unique hollow form. He calls it a "Jug with a Plug". The shape reflects Sam's love of old pottery. He does show some hollowing, but focuses on turning the form and making the plug or lid for this vessel. He also shows how he makes a simple and cheap thickness gouge out of 1/8" wire.See the timecodes below for various topics you can jump to. Chapter Timestamps-----click on the time and jump to the topic listed00:00 Introduction00:33 Sam explains today’s project01:38 Chucking up on a screw and the turning begins04:30 Preparing the bottom for a waste block05:48 Glue on the waste block07:00 Tenon for Longnose jaws 08:18 Chucking the piece up in a scroll chuck10:00 Shaping the outside with a gouge11:08 Drilling for depth14:32 Hollowing begins17:00 Sam explains his shop made thickness gauge and then makes one21:50 First coat of lacquer24:00 More finishing25:10 Parting off26:28 Making the plug/lid32:38 Ebonizing the plug36:02 Finishing the plug and ConclusionIf you have an interest in purchasing an American made Robust lathe-contact me at samandcheryle@gmail.com Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop April 2022 Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-04-24 | Sam once again responds to questions and comments over his recent videos. He shows off some recent work, mentions some upcoming videos and once again has a giveaway-see the video for the prize and details for entering below. See bonus clips on scrapers at the end of this video.The winner of the April NOTES' video prize giveaway is Mike Peace-well deserved for all his work on his videos and demonstrating.....Congrats!!!Link to Mike Peace's video on Ukraineyoutube.com/watch?v=L13bh973Z9c&t=3sTimecodes: Click on the time and jump to the topic listed 00:00 Introduction 00:57 March Notes from the Turning Shop winners02:20 April contest….Prize and rules see description for details02:46 Upcoming videos04:13 Prize for April: Madrone hollow form06:30 Answering Comments and questions07:37 Mention for the Mike Peace video on Ukraine13:25 Question on Robust tool rests25:06 Turning Toys book by Richard Raffan (shout-out)26:11 Bonus clips on scrapersREAD THESE CONTEST RULES CAREFULLY. It is free to enter this giveaway contest-just leave a comment. "Notes from the Turning shop" (Published April 24th) giveaway rules: ~To enter the contest-simply leave a comment ON THIS VIDEO!!!~The Winner(s) will be selected and informed on April 29TH on the same comment the winner left. It will also be listed ABOVE in the description area. GO BACK AND CHECK YOUR COMMENT---- to see if you won.~The winner MUST respond by May 4th, 2022 Respond by email to samandcheryle@gmail.com If there is no response by May 4th, the winner will be disqualified, a new winner will be selected and contacted.~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner.Link to YouTube community guidelines: https://www.youtube.com/howyoutubewor... Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Bradford Pear Natural Edge Pot Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-04-17 | Sam focuses on turning a natural edge "pot" from Bradford Pear wood. He starts by milling the wood on his bandsaw and then turns the piece to final completion. This beautiful closed form is turned wet and very THIN. Enjoy!Playlist on Natural Edge Pieces: youtube.com/playlist?list=PLL5-IWEcq6B976cu7sOgzzEFDIxOSBiXETimecodes: Click on the time and jump to the topic listed 00:00 Introduction01:05 Milling the wood at the bandsaw03:00 Chucking the blank between centers04:35 Turning the underside of the piece and creating a tenon07:31 Reverse chucking and turning the bark edge opening08:40 Drilling the center of the opening11:20 Removing wood from the center of the opening15:55 Using hollowing tools to go deeper into the vessel20:00 Hollowing continues with various tools24:38 Sam shines a light through a thin wall of the piece26:07 Reverse chucking the last time and finishing the foot27:18 Conclusion Thanks for watchingPlease subscribe for more weekly videos from wyomingwoodturnerThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Lidded Maple Burl Container Turned by Sam Angelo WYOMINGWOODTURNER 2022-04-10 | Sam turns an artistic lidded container from an amazing maple burl. The lid is sliced from the same block of wood and the lid's "handle" detail is sculpted from walnut and ebonized with leather dye. Please leave a comment and hit SUBSCRIBE.Chapter Time codes: Click on the time and jump to the topic listed.00:00 INTRODUCTION00:30 The project explained02:40 The lid attached on a screw chuck07:11 The tenon established on the lid09:36 The base attached on the screw chuck11:45 Waste block glued to the base14:12 Shaping the base16:04 Base fixed into a scroll chuck18:48 Continue on the base and hollowing the inside of the base23:45 Applying a finish to the inside of the base26:14 Working on the lid and connection to the base30:15 Final profiling of the lid31:45 Drilling on the lid for the handle and lid detail32:00 Sam shows the lid detail Conclusion Thanks for watchingThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning a Thin Bradford Pear Bowl with Sam Angelo WYOMINGWOODTURNER 2022-04-03 | Sam turns a 7" Bradford Pear bowl to a wall thickness of 3mm/1/8 inch. Fun to watch......Please subscribe for a weekly YouTube, woodturning video....and share this video.See links to other related videos published by Sam Angelo in past years. Two more videos on turning "thin".....Natural Edge Holly Bowl youtube.com/watch?v=pQsz9mYbKa0&t=1sNatural Edge, Wet-turned test bowlyoutube.com/watch?v=_27WsSs8hbw&t=550sChapter Time Codes Click on the time to jump to your desired topic in the video Enjoy....00:00 Introduction00:48 Explanation of today’s project01:29 Establishing a tenon02:52 Starting to profile the bottom of the bowl04:32 Working on the rim and inside of the bowl07:03 Turning decorative grooves with a point tool10:12 Starting to turn this bowl thin15:43 Final cuts on the bottom/establishing proper thickness19:33 Looking at the thickness using a light20:46 Reverse chucking to finish the foot23:23 The completed bowl and conclusionThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning a Square Cottonwood Burl Bowl Turned Artwork with Sam Angelo WYOMINGWOODTURNER 2022-03-27 | Sam turns a lovely small burl into a work of art. He keeps the square outline of the original blank and then adds some faux' turquoise for a splash of color. Enjoy the beautiful grain and figure emerge as Sam turns this little bowl. Please subscribe if you are a new viewer......Thanks for watching. Chapter "Timecodes" ..... Click on the time and jump your desired topic 00:00 Introduction00:25 Sam explains the project01:35 Chucking methods for this project02:00 Turning begins on the bottom of the bowl02:47 Marking the tenon04:50 Profiling the bottom of the bowl07:14 Reverse Chucking09:35 Turning the top of the bowl16:45 A little sanding-turquoise applied18:38 “Final” reverse chucking to finish the foot22:33 Final shaping of the underside of the piece23:10 Conclusion and photos of the completed bowlThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop -March 2022 and the 65K YouTube Subscriber GIVEAWAY Sam Angelo WYOMINGWOODTURNER 2022-03-20 | Sam once again responds to questions and comments over his recent videos. He also celebrates reaching the 65,000 subscriber milestone-He announces there will be 3 winners selected at random from comments left by viewers. Prizes are described in the video.WINNERS for the March 2022 NOTES giveaway are!!!!1st place Bowl gouge is----Bindy302nd place Square Bowl is---Anna Redd3d place 3 little bowls is----Todd READ THESE RULES CAREFULLY. It is free to enter this giveaway contest."Notes from the Turning shop" giveaway rules: (Published March 20th)~To enter the contest-simply leave a comment ON THIS VIDEO!!!~The Winner(s) will be selected and informed on March 25TH on the same comment the winner left. It will also be listed ABOVE in the description area. ~The winner MUST respond by March 30, 2022 Respond by email to samandcheryle@gmail.com If there is no response the winner will be disqualified, a new winner will be selected using the comment picker.~This giveaway is connected in NO way to YouTube NOR is this Giveaway sponsored by YouTube Because of increased shipping costs, the prize(s) will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner.Link to YouTube community guidelines: youtube.com/howyoutubeworks/policies/community-guidelines/#community-guidelines Links to videos Sam mentioned in THIS videoRobust Tools' Scraper Review: NRS and Traditional.youtube.com/watch?v=JAfEn9SqGL0&t=977sWorst video EVER: DON'T BOTHER WATCHING THISyoutube.com/watch?v=C-SD8bB0Uso&t=11sThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Robust Tools Scraper Review: NRS and Traditional.... with Sam Angelo WYOMINGWOODTURNER 2022-03-13 | Sam puts two Robust Tool scrapers through their paces. He looks at tool steel, using the tools in end grain AND cross-grain work, and covers some examples of why each is used in various situations. He also briefly touches on his way of making a tool handle that will hold securely a rectangular tang: see the link below for a full video on this topic. Tool Handle video on Box Scraper youtube.com/watch?v=70zpTB63IuE Robust Tools LLC Turner's Edge Turning Tools: (This page opens to all gouges and scrapers) turnrobust.com/product/turners-edgeTimecodes: Click on the time and jump to the topic listed 00:00 Introduction 00:30 First look at the scrapers00:41 Scope of the video: making a handle—testing the tools 01:45 Tool Specs02:25 Sharpening, bevels, and tool angles 10:13 Cutting on cross-grain and tool presentation 28:27 Cutting on end-grain-lidded container 33:55 Conclusion and recommendations (all positive)Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
An EGG a WEED POT Turning Tools a glue Block and a Faceplate- Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-03-06 | Sam shows some fundamental woodturning techniques in this information-packed video. He turns a weed pot and an egg showing exact measurements, various tools, chucking with a faceplate and glue block and as usual, some excellent video work.Chapter Time Codes Click on the time to jump to your desired topic in the video Enjoy....00:00 Introduction00:40 Turning square to round with a SRG06:30 Some practice detailing with a spindle gouge 07:44 Designing the weed pot Copying dimensions from a photo11:12 Marking out important parts of the weed pot: beads and coves12:58 Turning the weed pot13:43 Using the spindle gouge16:00 Cleaning up tool marks with a Negative Rake Scraper19:12 Parting off19:53 On to turning the EGG-a faceplate and waste block21:05 Gluing the Pink Ivory egg blank to the waste block23:36 Turning the egg with a SKEW chisel27:23 The egg is sanded and a finish applied-28:00 Parting off and conclusionLink to Jim Rogers book: (I copied the measurements for the Bud vase from Jim's book) ....Mastering Woodturning Fundamentals amazon.com/Lesson-Plan-Woodturning-Step-Step/dp/1610351819Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
MidWeek Madness and Chainsaw Safety-The Dos and Donts Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-03-02 | This is a "Sister Video" to the "Elegant Natural Edge" video published on Feb 27th:link below. Sam will focus on using a chainsaw safely and will provide his own list of things you should and should NOT do. When you are starting out with any dangerous tool, ask for help and learn from someone more experienced.Link to:Elegant Natural Edge Ash Bowl youtube.com/watch?v=VpYroQg3mzwTime Code "Chapters": Click the time and jump to the desired topic you wish to explore.00:00 Introduction00:50 Goals for this video02:38 Sam cuts some logs with his chainsaw03:19 Cameo appearance by Cheryle -15 below zero!!!03:45 More chainsaw work04:15 Protective equipment06:03 More on safety Sam in the shop showing 2 saws08:12 Electric vs Gas powered Saws08:50 Gas-powered saw explained11:42 Starting a gas-powered chainsaw12:49 More safety rules15:45 Conclusion Be safeMy stock Robust American Beauty lathe has been SOLD.I have another American Beauty stock lathe that will be ready in April.....Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Elegant Natural Edge Ash Bowl Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-02-27 | All bowls turned on the lathe are elegant in their own way.....Sam turns this one from American Ash. This bowl is "wet turned" to completion requiring a wall thickness of 1/4" or less, preventing cracks as it dries. As usual, Sam explains and shows his process for turning this bowl with excellent videography. See links below for more of Sam's bowl turning videos:At the end of the video I failed to show how I finished the bottom of this bowl. This video explains how I do it: youtube.com/watch?v=Vdn0PdySkh4 Playlists-From a log to a completed Bowl youtube.com/playlist?list=PLL5-IWEcq6B-hymSlYZxdWTeVPTFRNe9ZNatural Edge Bowls youtube.com/playlist?list=PLL5-IWEcq6B_mARE07x40zXEOXkPYK7uITurning Bowls youtube.com/playlist?list=PLL5-IWEcq6B-c9SsTu2NTNWKbsLl0bXvFChapter TimeCodes: Click on the time and jump to the desired topic00:00 Introduction00:34 Wood Selection01:02 Sam suits up for chain sawing logs01:31 Sam cranks up the chainsaw 02:36 Milling bowl blanks-splitting a log02:41 Cutting the blank at the bandsaw06:09 Mounting the bowl blank on a screw chuck07:15 Marking the high and low points of the bowl10:00 Turning begins on the bottom of the bowl14:00 Marking And forming the dimensions of the tenon19:18 Reverse chucking and turning on the top of the bowl20:25 Sam runs into a NAIL-gotta see this21:50 Turning continues on the rim26:51 Conclusion and photos Interested in an American Beauty lathe? Contact me for details on one I have in the Robust Lathe "stock" program. samandcheryle@gmail.com Thanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Notes from the Turning Shop February 2022 Woodturning with Sam Angelo WYOMINGWOODTURNER 2022-02-20 | Sam answers questions and comments left on recent videos. Last month's "giveaway" winner did NOT respond within the allotted time. So Sam will attempt once again to give away the Robust tool rest. Please see the rules below so you don't miss out. Also in the video, Sam also shows off photos of his recent projects."Notes from the Turning shop" giveaway rules: (Published February 20th)~To enter the contest-simply leave a comment ~The Winner will be selected and informed in the comment area of the video (on FEBRUARY 25TH) 5 days after publication. ~The winner MUST respond by March 2nd, 2022 If there is no response, a new winner will be selected by the comment picker and contacted. Because of increased shipping costs, the prize will be sent only within the lower contiguous 48 states. If the winner resides outside of the United States, suitable compensation will be provided to the winner.A big shout out....Watch the master, Richard Raffan demonstrate on YouTube......subscribe to his channel:youtube.com/channel/UC2tEGrCP1GiVwfaT4K9bcNwMy updated light bulb kiln video: youtube.com/watch?v=Z09xUNGTcg4&t=440sThanks for watching my videos- Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. As a bonus for purchasing a Robust lathe through my dealership, I will provide one full day (6 hours) of instruction in my shop in Billings, Mt. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
