Cooling down my VIC-20 Chuck Hutchins 2020-04-10 | Modifying my VIC-20 to run cooler by replacing the voltage regulator.Power use dropped from ~2.2 Amps to ~1.1 Amps.Operating temperature dropped from ~50c to ~28c-------------Using a PSU5 from EZSBC (not a paid endorsement)ezsbc.com/index.php/psu5.htmlAlso re-cap kit from Console5console5.com/store/cap-kits/computer-cap-kits/commodore/vic20-kits.html
PET Deep Dive, Part 1, The Power Supply #comMAYdore Chuck Hutchins 2023-05-15 | The PET power supply, checking AC, DC, unregulated and regulated voltages.#comMAYdore #commodore #retrocomputing Part 1 of a series on the inner workings of the Commodore PET.My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netCommodore PET Schematics http://www.zimmers.net/anonftp/pub/cbm/schematics/computers/petMy Annotated Schematics drive.google.com/drive/folders/1GLVt62bZfdXn9Jt4TlOv2gLS0iYMxYJvindex00:00 Intro00:42 Different versions of the PET01:12 Tools02:01 Volt Meters / Multi Meters04:31 AC Input06:45 Static PET AC voltages09:23 Static PET DC voltages13:00 Dynamic PET AC voltages15:39 Dynamic PET DC voltages18:47 Universal PET and 12" monitor AC voltages19:58 Universal PET DC voltages21:25 Troubleshooting24:10 Outro25:02 Schematics and all measured voltages
Show and Tell: DEC VT102 and PiDP-11 Chuck Hutchins 2022-12-12 | #DECcember #DEC #vt100 #terminal #rs232 Showing my Digital Equipment Corporation VT102 and PiDP-11PiDP-11 obsolescence.wixsite.com/obsolescence/pidp-11-overviewPiDP-11 build photos photos.app.goo.gl/Mp2qZbK6p3fDf4gY9vt102 photos photos.app.goo.gl/9okufu2SwpsMtQB97My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netindex00:00 Intro00:23 Features and Connectors01:00 Disassembly and internal features01:55 Keyboard02:49 Power on and set-up screens04:28 PiDP-1105:00 Connecting serial cable05:21 Booting with serial console05:47 PiDP-11 Simulation selection06:54 Booting unix707:43 Booting 2.11 BSD08:47 Telneting to a BBS09:16 Outro
Vintage Computer Festival West 2022 Chuck Hutchins 2022-08-13 | Video and snapshots from VCF West 2022.My camera work is terrible so I apologize for the jerky camera movements.@bitfixer6502's channel@vcfederation's channel My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netindex00:00 Intro, Transporting the exhibit00:21 Day 1, pre-show setup03:21 Consignment room04:21 Day 107:12 Day 2, pre-show09:58 Day 2
Show and Tell: My Commodore PET Collection Chuck Hutchins 2022-08-01 | Showing my collection of Commodore PET computers and peripherals.The Vintage Computer Festival West 2022 is on Aug 6th and 7th at the Computer History Museum in Mountain View, CA. Come to the show and see the collection in person.Link: vcfed.org/events/vintage-computer-festival-westMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netOther videos showing these PETs and Drives2001-8 Repair youtu.be/Vwg0Bw0KvZo2001-8 Show and Tell youtu.be/IPq9jqrxCsgSanyo Tape Drive youtu.be/xzMdKCOOvKIDatasette Rebuild youtu.be/E2Yv1PiNJFcDatasette Collection youtu.be/5kRmlG9cCMI2040 Floppy Testing youtu.be/dcMuUaZwD-kThe 4010 Voice Synthesizer youtu.be/JU-XyAHXYOMSP9000 Super PET youtu.be/UggS5LmPPF02031 Floppy youtu.be/43LWmWDFfMgIndex00:00 Intro00:22 PET 2001-8 (1977)03:22 PET 2001-32N (1979)05:09 C2N Datasette05:31 2040 Dual Floppy (1979)07:28 CBM 8032 (1980)10:00 8050 Dual Floppy (1980)10:54 PET 4032 (1980)12:53 4040 Dual Floppy (1980)14:15 4022 Printer14:46 4010 Voice Synthesizer15:37 SP9000 Super PET (1981)18:08 2031 Single Floppy (1981)19:10 Outro
Removing RIFA Capacitors Chuck Hutchins 2022-07-18 | Removing RIFA Capacitors from my Commodore 8050 and Super PET.These are built in to the power cord socket and are there to filter RF noise from feeding back into the electrical mains. Unfortunately as they age, they tend to short out releasing smoke and smelling up the place. Better to replace or remove them before they short out.Replacement Power Receptacle: uxcell IEC 320 C14 Panel Mount Power Connector SocketMore about RIFA capacitorsyoutu.be/XAbrU17hLTMyoutu.be/ikp5BorIo_M?t=1203My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netIndex00:00 Intro, 8050 Floppy RIFA smoke01:21 Installing a new IEC C14 power cord socket in the 805004:08 Super PET, removing the power cord socket06:15 What's inside the power socket and what's it for?08:04 Installing a new IEC C14 power cord socket in the PET11:30 Testing and outro
HDMI for the Commodore PET Chuck Hutchins 2022-06-14 | Configuring the RGB2HDMI for use with the Commodore PET.@adriansdigitalbasement video on the RGB2HDMI with the PETyoutu.be/G4LMqCb6jPM@bitfixer6502 's video using RGB2HDMI with the PETyoutu.be/InU45uTtQP0@DavesGarage video on combining the signals into an NTSC composite video signalyoutu.be/Y-C2n8JK_zwTutorial on adding a new profile to the RGB2HDMIgithub.com/hoglet67/RGBtoHDMI/wiki/Tutorial-on-Adding-a-New-ProfileLink to my profilesdrive.google.com/drive/folders/1ZgHpQbSnD8l3kD7Rma_SUI3dJtWAbMGBMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netIndex00:00 Intro01:25 The TTL RGB2HDMI from Tex Elec01:54 Making a cable to connect the PET03:32 Buttons and on screen menus04:36 Creating a new profile06:50 Testing and fine tuning w/ 40 Column CRTC PET09:54 Testing and adjusting for 80 Column CRTC12:58 Re-testing 80 column profile with 40 column CRTC13:54 Additional features14:59 Adjusting the profile for a non-CRTC 9 inch PET17:55 Testing the profile auto switching18:33 How to download profiles to the RGB2HDMI19:43 Testing with a chicklet PET and adjusting the colors20:12 Conclusion/Outro21:04 A quick game of Dungeon22:14 Original PET Demo@TexElec RGBtoHDMI – 6-bit TTL Edition (Not Sponsored)youtu.be/VUcYIZmQ990?t=80texelec.com/product/rgbtohdmi-ttl
Modding a Phoenix CPS-10 Power Supply Chuck Hutchins 2022-06-07 | Modding a Phoenix CPS-10 power supply for the Commodore 64.Assessing the power supply, replacing some small gauge wiring and adding a voltage and current meter to the front panel.Index00:00 Intro00:53 Drilling out the rivets01:39 Assessing the internal components04:30 Upgrades05:51 Testing the meter06:47 Modding the case07:30 Wiring and testing08:21 Calibrating09:30 Reassembly and outroMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Philips EL3301/3302 Cleanup and Belt Replacement. Chuck Hutchins 2022-05-23 | Cleaning the old belt residue and replacing the belts on a EL3302.Showing my Norelco EL3301 Carry-corder 150 and some recordings from 1965.Index00:00 Intro01:00 Controls and features02:40 Disassembly03:12 Liquefied belt residue04:48 EL3301 and 3302 internal comparison11:00 Cleaning the belt pulleys16:27 Reassembly23:09 Replacing the belts24:30 The record protect lever and play/record switch28:40 Testing31:12 Outro and EL3301 Show and Tell32:33 Recordings from 1965My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
My Commodore 64, The Empire Strikes Back and 2000 Subscribers! Chuck Hutchins 2022-05-09 | My Commodore 64 from 1986, The Empire Strikes Back and 2000 Subscribers!Index00:00 Intro00:47 My Commodore 64 and 154104:06 My setup and connections04:52 Running Diags06:23 Testing floppy drive and Sidplayer disks07:42 Easy Flash 3 and Kung Fu Flash11:25 The Empire Strikes Back18:12 OutroThe Empire Strikes Back by Megastylemegastyle.itch.io/esb-by-megastyleMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Troubleshooting a PET with a Datasette Chuck Hutchins 2022-05-09 | Using a datasette to determine if the CPU is crashed or running.Index00:00 Intro01:08 Testing with a datasette02:39 Schematic and checking signals with logic probe05:00 Piggybacking replacement chip for testing05:42 OutroMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Troubleshooting a PET 2001-N mainboard Chuck Hutchins 2022-03-17 | Troubleshooting and diagnosing a PET 2001-N board.Quick and dirty, off the cuff, chip swapping and running diags.Index00:00 Intro01:24 Testing02:30 Troubleshooting and Diags03:43 Chip Swapping06:53 Testing IO ports09:03 New 6520 replacement10:14 OutroWDC W65C21N6TPG-14 is a drop in replacement for the 6520.My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Commodore Super PET Restoration (Part 3) Chuck Hutchins 2022-02-28 | Part 3 of 3. Test, Repair and Demo of the 6809 side.Finishing up the last few repairs and demoing the working SuperPETLinksSuperPET "hello world" in all programming languagesyoutu.be/QJl5MVUt7vQtwitter.com/commodoreihs/status/1382125548185513988SuperPET OS/9 MMU: store.go4retro.com/superpet-os-9-mmuMike Naberezny's page http://mikenaberezny.com/hardware/superpet/super-os9-mmuSuperPET Basic Banked RAM Test by Mike Nabereznydrive.google.com/drive/folders/1wsXBMJ_Ekib0taDGL0JcBcvcg1oycU26More information about the Super PEThttp://seefigure1.com/2013/12/07/superpet.htmlhttp://www.6502.org/users/andre/petindex/superpet.htmlhttp://zimmers.net/cbmpics/csp9000.htmlvintagecomputer.net/browse_thread.cfm?id=209Restoration Process Photos photos.app.goo.gl/yNoMKGcVotWARUJ38My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netIndex00:00 Intro & recap01:20 System RAM failure and testing04:50 Identifying and replacing the faulty dRAM chip07:02 Expansion RAM diagnostics08:30 Incorrectly identifying the faulty expansion dRAM chips09:46 Correctly identifying the faulty expansion dRAM chips11:14 Additional diagnostics11:57 Repairing the option ROM socket towers18:06 Explaining the side switches18:57 SuperPET Demo19:39 Waterloo menu and languages demo22:52 OS/9 Demo25:11 Outro
Commodore Super PET Restoration (Part 2) Chuck Hutchins 2022-02-14 | Part 2 of 3. Test, Troubleshooting and Repair of the 6502 side.In the next video I'll cover troubleshooting the 6809 side, and hopefully be able to demo.23xx EPROM to MOS 2332 socket adapter: store.go4retro.com/23xx-adapterROMulator: bitfixer.com/product/romulatorTynemouth RAM/ROM replacement: thefuturewas8bit.com/shop/commodore/petromram.htmlMore information about the Super PEThttp://seefigure1.com/2013/12/07/superpet.htmlhttp://www.6502.org/users/andre/petindex/superpet.htmlhttp://zimmers.net/cbmpics/csp9000.htmlvintagecomputer.net/browse_thread.cfm?id=209Restoration Process Photos photos.app.goo.gl/yNoMKGcVotWARUJ38My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netIndex00:00 Intro & what is a Super PET?01:47 Visual inspection05:20 Electrical checks11:11 Testing the 8032 and running diagnostics15:43 Removing and socketing the video RAM17:43 Adjusting monitor vertical height18:03 Running PETTESTE2K from the Romulator19:10 Removing and socketing the Kernal ROM21:48 Cleaning the keyboard contacts24:23 Re-installing the SP9000 boards and switches27:48 Testing the SP 6809 side29:44 Outro
Commodore Super PET Restoration (Part 1) Chuck Hutchins 2022-02-03 | Part 1 of 3. Complete disassembly and thorough cleaning. Replace broken fuse holder and chassis reassembly.In the next video I'll cover visual inspection and basic electrical checks before testing and troubleshooting.Fuseholder: BK/HTB-54I-RMore information about the Super PEThttp://seefigure1.com/2013/12/07/superpet.htmlRestoration Process Photos photos.app.goo.gl/yNoMKGcVotWARUJ38My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netIndex00:00 Intro00:20 Removing and disassembling the Monitor02:33 Removing the case top and keyboard03:37 Removing the PCBs06:08 Removing the transformer07:06 Chemical rust removal (minor)09:04 Replacing the broken fuse holder11:29 Testing the transformer and AC voltages12:03 Reinstalling the transformer13:15 Cleaning the case16:18 Reinstalling the case top17:06 Cleaning and reinstalling the keyboard22:29 Reassembling and reinstalling the monitor24:06 Outro
Using a SNES Controller for Petscii Robots on the PET Chuck Hutchins 2022-01-26 | Using the Petscii Robots SNES adapter and the Hyperkin Scout SNES controller on a real PET.Note: This is an updated revision of a video I posted two days ago. I wanted to update the video after I figured out what was wrong.The PET user port does not provide power for the adapter, so I needed to tap power from the cassette port. It turns out, the Hyperkin controller doesn't work well with the PET but I found a solution.The Scout controller feels well built and the controls are responsive. I'm sure it's a great controller with a SNES or Hyperkin console, and it worked fine on my C128, it just didn't work on the PET.Index00:00 Intro and Connecting the adapter01:24 Loading from floppy disk03:39 PET user port vs C64 user port04:11 Connecting power from the cassette port05:27 Testing SNES controller07:12 Problems with SNES controls08:40 Comparing controls with the C128 version11:25 Testing on other PETs13:39 Checking voltages, user port vs cassette port16:10 Explaining the problem and the solution18:57 Testing the solution20:12 Gameplay and outroYou can find the SNES Test Program here ...http://www.zimmers.net/anonftp/pub/cbm/documents/projects/interfaces/index.htmland other games that use the SNES controller here ...http://www.zimmers.net/anonftp/pub/cbm/pet/games/english/snes/index.htmland of course Attack of the Petscii Robots by David Murray here ...the8bitguy.com/product-category/musicMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Mail Call: Unboxing a Commodore SP90000 Super PET Chuck Hutchins 2022-01-22 | Unboxing a (new to me) Commodore SP9000 Super PET, shipped in two parts.Well packed for shipping and perhaps a safer way to ship a Commodore PET.I've been hunting for a Super PET for some time to round out my PET collection. This one needs a little work but that'll be the subject of another video coming soon.Links:More information about the Super PEThttp://seefigure1.com/2013/12/07/superpet.htmlMy Blog: blog.hutchins1.netMy Twitter: twitter.com/HutchCACommodore PET / CBM Enthusiasts Facebook Group facebook.com/groups/214556078753960
Adjusting the head alignment on a Commodore datasette Chuck Hutchins 2021-12-05 | How to align the head azimuth on a Commodore tape drive.Sanyo, C2N, 1530, 1531Aligning by ear and by oscilloscope.Alignment Procedure: http://www.zimmers.net/anonftp/pub/cbm/schematics/datassette/datasette_schematic.pdfSchematics: http://www.zimmers.net/anonftp/pub/cbm/schematics/datassette/index.htmlIndex00:00 Intro01:06 Audio recorder alignment by ear02:19 1530 Datasette alignment by ear06:15 Playing music through the datasette07:10 Accessing the alignment screw on a C2N drive09:39 Notes on source tape and tools10:41 Oscilloscope view of typical program data11:22 Alignment procedure and test point12:05 Adjusting for peak signal strength12:45 Fine adjust with scope and program view15:17 Final measurements and testing16:14 OutroMusic by Anders Enger Jensen, eoxstudios.bandcamp.comMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Stupid PET Tricks. 3-in-1 cartridge for the Commodore PET Chuck Hutchins 2021-11-22 | A cartridge for the Commodore PET that combines Joystick interface, sound and a WiFi modem in one package.Jim's Videoyoutu.be/PJrEYils4D8Blog Post64jim64.blogspot.com/2020/07/stupid-pet-tricks-adding-sound-and.htmlInstructionsbit-zeal.com/stupid-pet-tricks-instructionsCRX Presentationyoutu.be/VrvcoTNUagc?t=3677Orderbit-zeal.com/product/stupid-pet-tricks-module/3PETtermgithub.com/ChartreuseK/PETTERM/releasesIndex00:00 Intro00:41 Kit Contents02:07 Assembly, Power Tap Board08:14 Assembly, Main Board18:37 Connections20:00 Testing21:18 Sound/Music Test21:50 WiFi Test24:12 Game, Cosmiads25:11 Game, Breakout25:55 Game, Brick Wall26:33 Game, Print Racer27:55 Game, PacMan28:50 Different interfaces for different games29:18 Game, Galaxy Invaders30:48 OutroMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Pet-Tune-Ya! Digital music from the Commodore PET Chuck Hutchins 2021-11-08 | Show and Tell about the HUH Electronics Petunia card for the Commodore PET.A digital to analog converter and four-voice software music synthesizer.Index00:00 Intro, the card and connecting to the PET01:10 The Petunia driver program02:17 The Petunia Player program03:24 Sample music "Moonlight Serenade" (via speakers)04:12 Playback options and Test Scale05:37 CB2 music example for comparison06:14 The 16K version of the Petunia driver and Petunia player07:02 Sample music "Cat Scratch Fever" (direct recording)07:43 Sample music "Yoda's Theme" (direct recording)08:19 sample music "For Your Eyes Only" (direct recording)09:29 Music player by M.K.Bonnycastle10:13 Sample music "Love Theme" (direct recording)11:57 Outro12:27 Full song "The Easy Winners" (direct recording)Link to Petunia softwaredrive.google.com/drive/folders/10HHTilHoilSvUVEWkU3VWsJKskS4qqOZMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
TRS-80 Model 1 restoration #SepTandy Chuck Hutchins 2021-09-27 | Restoring a 1978 TRS-80 and CTR-80 cassette recorder. #septandy2021Repairing shipping damage, faulty RAM, cleaning and testing a 1978 4K Model 1, Monitor and CTR-80 cassette recorder.Index00:00 Intro01:04 Monitor disassembly, repair and re-assembly07:14 Power supply testing and disassembly10:52 Computer disassembly and testing17:49 Video ram chip removal and socket install22:20 Video ram chip swapping26:49 Voltage regulator check and adjust29:36 CTR-80 Cassette recorder testing, disassembly and belt replacement41:11 Final video ram chip replacement43:33 Monitor adjustment46:21 Power supply fuse replacement49:37 CTR-80 Cassette recorder fix and testing53:28 ConclusionMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Hydrogen Retrobright Experiment Chuck Hutchins 2021-07-03 | Testing if it's possible to retrobright plastic using hydrogen.Mr Gigabyte's "Retrobrite Gigsplained": youtu.be/Bc34LICGwU0Jeff Birt's "The truth about Retr0brite": youtu.be/YPl356YKcVsAfter watching a video about retrobright (link above) I got the idea that maybe you could retrobright plastic using hydrogen gas. This is my attempt to test hydrogen gas (in water) as a method of retrobrighting plastic.Index:00:00 Intro00:50 Hydrogen water03:31 Magnesium04:19 Selecting key-caps05:04 Setting up08:20 Monitoring13:12 Results17:55 ConclusionI'm assuming that sun-brightening is responsible for the minimal lightening on the keys in plain water and hydrogen water. The polypropylene containers must be transparent to UV. The magnesium tablet solution probably blocked the UV so no sun-brightening happened there.Any number of other factors, including the keys themselves, may have made hydrogen peroxide reaction slower than I was expecting.Perifractic’s Video on Sun Brightening: youtu.be/8P1OVj0IcqYMr. Gigabytes' "13 month Speedeebrite Experiment": youtu.be/WOi6lBVIYOEMy Blog: blog.hutchins1.netMy Twitter: twitter.com/HutchCA
VIC-20 Cartridge Sleeves Chuck Hutchins 2021-06-03 | Putting together some of Giacomo Vernoni's new VIC-20 Cartridge sleeves.I made some mistakes on my first try. Jump to @16:50 to see how to do it the right way.Giacomo's web site oldcomputr.com/product/commodore-vic-20-cartridge-sleeves-pdf-commodoreIndex00:00 Intro00:36 Printing01:31 Tools, Supplies and Instructions02:00 Scoring fold lines03:03 First attempt. I can do better.10:32 Second attempt. Failure!15:05 Third attempt. Good.16:50 Final technique. Much better.21:24 Conclusion and outroMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Show and Tell, 1977 Commodore PET Chuck Hutchins 2021-05-10 | Showing my '77 PET and taking about the cosmetic changes that the PET went through in the first few months of production.I've collected data over the past couple of years to try to figure out all of the different changes and when they happened.There are dozens of different case badges, three different cassette tape drives and even a few keyboard variants between the start of production in late 1977 and the end in 1979.CRX presentation about the early PETs youtu.be/VrvcoTNUagc?t=18440Index0:00 Intro0:34 Unusual Features1:19 Early production 1:44 Serial number2:12 Markings3:09 Cassette drive4:16 Screen bezel and changes in December5:01 Case badge5:37 PCB6:53 Monitor7:15 OutroLinks:Blogblog.hutchins1.net/2020/02/1977pet2001.htmlPhotosphotos.app.goo.gl/6T54VKsAoepvbprm6Spreadsheetdocs.google.com/spreadsheets/d/1NTQpIdW1gT3KTPUPs5mWHLGJxomzp0It32OHQ076W90Commodore PET Wooden Prototypeblog.hutchins1.net/2020/03/the-commodore-pet-2001-wooden-prototype.htmlFirst 100 Unitsen.wikipedia.org/wiki/Commodore_PET#ReleaseCommodore International Historical Societyfacebook.com/groups/commodoreinternationalhistoricalsocietytwitter.com/commodoreihsMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
The Model 43 Teletype Chuck Hutchins 2021-03-08 | Showing my 1979 Teletype Model 43 Teleprinter. Just like the ones I used in school.Index00:00 Intro02:01 Features and Controls04:57 Disassembly05:45 Hacking carrier detect06:10 Installing the ribbon07:22 Re-inking the ribbon09:01 Loading paper10:00 Logging in to a Raspberry Pi and telneting to a BBS13:03 Dialing in to a BBS with a modem14:48 OutroAdditional Photosphotos.app.goo.gl/3arnqQ9TRAngvpf5AMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Sony TC-40 Belt Replacement Chuck Hutchins 2021-03-01 | Replacing the belts on a 1971 Sony TC-40 tape recorder.Index00:00 Intro00:39 Disassembly & Cleaning05:09 Belt Replacement07:31 Re-assembly11:45 Features and Testing17:05 Outro17:16 p.s. Speed AdjustmentMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Restoring a 1970 Sony cassette tape recorder Chuck Hutchins 2021-02-15 | Restoring a Sony TC-120 tape recorder from 1970Unplanned video, quick and dirty edit.Looking at the mechanics of the transport, re-assembly, testing and an look at the features of this 50 year old audio recorder.Photos: myoldcomputers.tumblr.com/post/643294161878106112/tc120Index00:00 Intro01:02 Transport mechanism02:33 Belt replacement03:37 Re-assembly07:16 Transport features18:09 Testing22:14 TC-120 accessories and features24:40 Ending and OutroAnders Enger Jensen, Retro Grooves Vol. 4soundcloud.com/eox-studios/sets/retro-grooves-vol-4TC-120 SpecsMono, 4.8 cm/sFrequency Response: 50Hz to 10KhzSignal-to-Noise: Better than 46dBBias Frequency: ~85KHzSpeaker output: 1.5W@8ohmsDimensions: 252x63x147mmWeight: 2.2kg with batteriesMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
StarTech S-Video to VGA converter Chuck Hutchins 2021-01-25 | A review of the StarTech VID2VGATV2, S-Video to VGA converter.Converts Composite or S-Video (NTSC or PAL) to VGA (or Component)For simple stand-alone composite or s-video to VGA conversion it works exceptionally well for me.With the Cloner Alliance Box Pro, it allows me to record S-Video sources with pretty good quality.For the price though, you may be better off getting an OSSC or RetroTink instead.Index00:00 Intro00:53 StarTech VID2VGA overview03:44 Cloner Alliance Box Pro overview04:22 Direct video capture comparison05:54 Component video mode06:34 Video tape conversion08:00 VGA vs HDMI08:22 Outro08:41 Home videosI've never noticed any lag and haven't done any lag testing.I'm using a new lavalier microphone for the first time. Seems to be working ok.Still using my iPhone 7+ as my camera.Not a paid promotionThe "Super Video AV Adapter" I bought on EBay from retro_shopboxThe StarTech.com VID2VGATV2 I bought from Amazon.The HDML-Cloner Box Pro I bought from Amazon.Attack of the Petscii Robots is available from The 8-Bit Guy @ the8bitguy.comThe home video examples were recorded in Hi8 which is standard definition 480i. The tapes and the player are old and in rough condition, but hopefully you can see the improved detail when capturing from S-Video, even though it's going through two different converters. Feb 1992 shows my Amiga 2000 set-up, shortly before I upgraded to an A3000Sept 1994, while I was at Dyess AFB in Texas, the Space Shuttle Discovery stopped off for the carrier to refuel on it's way back to KSC after landing at Edwards a few days before.My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Suppressing the spot Chuck Hutchins 2020-11-29 | A follow-up to the recent video from Adrian's Digital Basement, "CRT Spot fix on the Commodore PET 2001", in which I test a mod to suppress the bright spot that appears in the center of the screen when powering off a Commodore PET with a 9 inch monitor.Adrian's Video: youtu.be/jwgsaUtbH3I?t=781IZ8DWF's Video: youtu.be/WULJxrQkQegIndex00:00 Intro01:06 Replacing C2202:32 Testing with C22 at 47uf05:30 Before and After comparison05:44 Apologies and caveat on this PCB06:21 Replacing R5 and R207:06 Testing with R2 mod (470 Ohm and 8.2v Zener) and C22 at 47uf08:31 Testing with R2 mod (470 Ohm and 8.2v Zener) and C22 at 3.3uf09:30 Reverting R2 mod and ConclusionsMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Commodore Datasette Collection Chuck Hutchins 2020-11-02 | My collection of Commodore cassette drivesIndex.00:00 Intro00:48 The Sanyo retail drive01:35 The "white keys" OEM drive02:33 The black C2N03:07 The white C2N04:26 The 153005:57 The 1531Links"Commodore Tape Recorders" by Giacomo Vernonioldcomputr.com/commodore-tape-recordersWooden PET prototypeblog.hutchins1.net/2020/03/the-commodore-pet-2001-wooden-prototype.htmlEarly Commodore PET with Sanyo driveblog.hutchins1.net/2020/02/1977pet2001.htmlSanyo M1540A Cassette Recorderblog.hutchins1.net/2020/02/sanyom1540a.htmlCommodore PET Integrated Cassette Driveblog.hutchins1.net/2020/03/commodore-integrated-cassette.htmlCollection Photosphotos.app.goo.gl/VQwE2wqcAvuTWXda6Blog Postblog.hutchins1.net/2020/11/datasettes.htmlMy Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
The VIC 20 Chuck Hutchins 2020-10-12 | Taking a look at The VIC 20 from Retro Games Ltd.Index00:00 Intro01:39 Unboxing03:11 Comparison to the original VIC-2004:52 Power on and set-up06:00 Exploring the carousel games08:19 VIC-20 and C64 Classic mode09:19 Loading programs from flash drive15:55 What's inside?18:29 Conclusion and photosTheC64 user manual is available here ,https://retrogames.biz/thec64/support/manuals-thec64My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
How to copy a cartridge game in 1983 Chuck Hutchins 2020-09-26 | Back in the 80's, all I had was a cassette tape drive and it's not easy to copy a cartridge to tape.We used a long forgotten little program called "ROMSAVE" to copy cartridges, but it required a bit of hardware hacking to allow the VIC to save the contents of a cartridge ROM.Thanks to Robin at 8-Bit Show And Tell for his generous help.youtube.com/8BitShowAndTell/featuredLink to ROMSave program: bit.ly/3j5YLNcIndexIntro: 0:00Hardware: 1:20Saving to Disk: 2:23Saving to Tape: 4:39Loading a saved cartridge: 8:47Write protecting a RAM cartridge: 10:13Summary and End: 11:13My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
Trash to Treasure. PET 2001-32N restoration. Chuck Hutchins 2020-08-26 | Restoring a salvaged 2001-N that was beyond repair. I tried to sell the empty shell for a while but found no takers so I decided to have it re-coated.Probably not accurate to call it a restoration since it's not being restored to any previous condition.I had the case sandblasted and re-powder coated with a brighter white semi-gloss. I also replaced any parts I could with new parts, so it doesn't look anything like it did when it was new.I replaced the power cord, power switch, fuse holder, case badge and logic board with all new parts.I replaced the monitor PCB, yoke and keyboard with vintage parts from Ebay.Powder coating by Vaider Powder Coating, Rohnert Park, CAReproduction case badge from retromedics.comRubber feet: SF10T-TPR73-BPhotos: photos.app.goo.gl/qhKeXL8xM9wMV7AX7Eventually I may replace the keyboard with a new mechanical keyboard. There's one PCB available and one in the works but it may be difficult to attach those on the mounting rails in this 2001.I may also replace the monitor tube with a 10" LCD screen someday.IndexIntro: 0:00Disassembly: 1:13New Parts: 2:23Electrical: 5:38Top Shell: 9:13Monitor: 10:29Case badge: 11:29Final checks and testing: 12:12Results: 14:40
PiDP-11 and VT102 Chuck Hutchins 2020-08-19 | Quick Demo of the PiDP-11. No Sound since there's nothing to hear.The PiDP-11 is a Raspberry Pi based replica of a DEC PDP-11/70.obsolescence.wixsite.com/obsolescence/pidp-11Shown running IDLED, Booting Raspbian and starting BSD2.11
Mini PET Userport Twister Chuck Hutchins 2020-08-10 | This is an update to my Mini PET build video. youtu.be/oHeQc1RgPFkThis is the "twister" board that was mailed out to those with early revision V1.42 and V1.44 boards that have the mirrored user port.I tested it with my CB2 sound module and RS232 converter. It works as described.Index:0:00 Intro0:20 CB2 sound test1:06 Serial port test
MiniPET build and test Chuck Hutchins 2020-07-09 | Building and testing the MiniPET from Tynemouth Software and The Future was 8 bit.Not a paid review. Cost ~£215.00 from thefuturewas8bit.comIndex:0:00 Build7:18 Clean10:49 Installing the chips14:11 Test21:30 Installing inside a real PET28:05 User port problem30:16 ReviewPDF of the included instruction sheets: drive.google.com/file/d/1-nr-vsurpsjLWFDpWQLb21Rz9AuHaFsR/viewPET sound and serial adapter: youtu.be/_6Hpgcr85mo
Commodore PET CB2 sound mod and serial port Chuck Hutchins 2020-01-28 | A project to add sound to a PET 2001 and a serial port while I'm at it.Link to updated Schematic drawing and notes.drive.google.com/drive/folders/1MWj7RvSsQ6ohvmhFsMO_aIgt4vZAHfIvPCB, Edge Connector and Cartridge Shell, I bought here.sharewareplus.blogspot.com/2015/01/new-baby-prototyping-pcb-for-commodore.htmlThe RS232 Connector and voltage converter is an ANMBEST MAX3232 3.3V to 5V DB9 Male RS232 Serial to TTL ConverterI got the Piezo transducer, micro USB and 3.5mm jack from AmazonThe switch I had on hand from years ago.My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.netIndex00:00 Intro00:49 Description02:07 Cartridge Shell Modification02:21 Connecting to the PET03:04 CB2 Sound Demo03:27 Cassette Audio Demo03:57 External Speaker Demo04:37 PET Term and Modem Connection Demo05:03 Outro
VIC-20 with PET Keyboard Chuck Hutchins 2019-11-17 | There's more than meets the eye to the "PET Style" VIC 20 keyboard.The matrix is different but mechanically it's identical to the PET Business keyboard.Shift-Lock Key: deskthority.net/wiki/Futaba_linear_lock
The audio recorder version of the Commodore PET integrated cassette drive Chuck Hutchins 2019-06-27 | A comparison between the tape drive from the Commodore PET 2001 and one of the commercial audio recorder equivalents.It seems this cassette recorder was an OEM device made for and sold by many different brands. Many have a model number or part number of CT-1020. Some say made in Taiwan and some say made in Japan, but they are externally identical apart from the colors and branding.The Commodore PET Integrated Cassette Driveblog.hutchins1.net/2020/03/commodore-integrated-cassette.htmlHigh Res Photosimgur.com/t/vintage_computing/RZ0ImF6Commodore Tape Recordersoldcomputr.com/commodore-tape-recordersMUSASHINOhttp://www.musashinocorp.com/en/profile/history.htmlCT-1020 , CT-1030 , C2N , Datasette , Datassette , Commodore , Precor C-1800 R , White Keys ,
Commodore Datasette Rebuild Chuck Hutchins 2019-06-27 | Disassembly and Reassembly of a Commodore cassette drive from the PET 2001-8.The Commodore C2N is mechanically identical inside so these instructions will also work for the black or white C2N driive.O-Rings 64881-A 3mm x 7mm x 2mmHigh res Photos: photos.app.goo.gl/ViuRcRk1f3fKWDbKA#C2N, #CT1020 #Commodore #Cassette
Commodore plus/4 Cassette Adapter Chuck Hutchins 2019-06-17 | Building an adapter to connect a 1531 to a PET, or a C2N to a plus/4Cassette Port Connector and PCB: http://store.go4retro.com/c2n-power7-pin mini DIN connector: thefuturewas8bit.com/shop/commodore/commodore-spares/7-pin-mini-din.html
petSD+ Assembly and Demo Chuck Hutchins 2019-05-06 | Assembling, Testing and Demoing a petSD+ version 2.4SD card reader "floppy" drive for the Commodore PETLinkspetSD+, http://www.primrosebank.net/computers/pet/projects/pet_petsd.htmFirmware Problem ?, http://www.primrosebank.net/computers/pet/projects/pet_petsd_fwq.htmAstra Labs 3D printed case, facebook.com/astralabs3dprintingHigh Res Photos, photos.app.goo.gl/K7Jj1HnnExqWsE4i9.....I should add that the actual dimensions of the PCB didn't change, but the IEEE connector was moved back a bit to make room for the optional IDC cable header (if fitted) to clear the display.Also, it is suggested to mount the LEDs about 1/16" raised from the PCB to better align with light pipes which I didn't do.
Sanyo M1540A cassette recorder restoration Chuck Hutchins 2019-04-08 | Complete disassembly, cleaning, reassembly and belt replacement of a Sanyo M1540A cassette recorder.This is the same cassette recorder used in very early production of the Commodore PET 2001.New belts, rewind belt SBM7.1, drive belt SBS9.5.
Commodore PET 2001 and Sanyo M1540A cassette recorder Chuck Hutchins 2019-04-08 | Comparing the Sanyo M1540A cassette tape recorder with the Commodore data recorder in the 1977 PET 2001-8.Blog Post: blog.hutchins1.net/2020/02/sanyom1540a.htmlThese were off the shelf cassette recorders Commodore modified to use in the very early PET 2001 units shipped in Oct '77. This was replaced by an OEM cassette recorder in December which was later replaced by the Commodore C2N Datassette.Commodore Tape Recordersoldcomputr.com/commodore-tape-recorders
Repairing a damaged connector on my Commodore Datasette Chuck Hutchins 2019-02-15 | Replacing the connector pins on my Commodore 1530 DatasetteMolex 08-50-0106 Crimp Terminalsmouser.com/ProductDetail/molex/08-50-0106/?qs=zi95yC3thwEn8WhcIJBXDA%3d%3d
1977 Commodore PET 2001-8 Chuck Hutchins 2019-02-06 | Testing and repairing a Commodore PET 2001 from 1977Blog Post: blog.hutchins1.net/2020/02/1977pet2001.htmlNotes:Tynemouth RAM/ROM replacement board.tindie.com/products/tynemouthsw/romram-replacement-board-for-commodore-petNew belts for Commodore tape drives.console5.com/store/parts/belts/commodore.htmlTroubleshooting Common Problems with the Commodore PET 2001.http://www.dasarodesigns.com/projects/troubleshooting-common-problems-with-the-commodore-pet-2001Commodore PET 2001 Users Manual.http://www.zimmers.net/anonftp/pub/cbm/manuals/pet/PET_User_Manual_(2001-8).pdf
Commodore 2031 Floppy Repair Chuck Hutchins 2019-01-21 | Troubleshooting and Repairing a Commodore 2031 Floppy Disk Drive.EProm socket adapters: http://store.go4retro.com/2364-adapterCBM 2031 Service Manual: http://www.classiccmp.org/cini/pdf/Commodore/CBM%202031%20Disk%20Drive%20Service%20Manual.pdf
January (Firefly) LootCrate Unboxing Disappointment Chuck Hutchins 2019-01-12 | Unboxing the January Firefly Lootcrate. Spoiler alert, It's very disappointing.My Twitter: twitter.com/HutchCAMy Blog: blog.hutchins1.net
