How To Make A REAL Door From Plywood I Build It Home 2017-10-22 | Project build article:ibuildit.ca/projects/plywood-doorWatch how I install this door:youtu.be/4q8UvmyP0joI have seven of these to make for the main floor of my house. While money can be saved by making these yourself, there is a lot of work involved, so you should consider that before taking it on. My reasons for doing this are mainly because I'll end up with doors that are much better quality than the typical hollow core doors you get from the retailers. Also, I have the freedom to make them exactly how I want, as plain or as fancy as needed to match the decor.The older door installation video:Part 1: youtube.com/watch?v=KO9ii6467sEPart 2: youtu.be/WjEuPoE7xi0Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
How To Fix Holes And Dents In A Steel Door I Build It Home 2019-05-14 | See the full door installation here:ibuildit.ca/projects/replacing-the-door-on-my-shopHere are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
How To Cut A Steel Entry Door I Build It Home 2019-05-13 | See more in the website article:ibuildit.ca/projects/replacing-the-door-on-my-shopHere are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Open A Locked Door With A Knife? Door Security 101 I Build It Home 2019-05-12 | Replacing the door on my shop:ibuildit.ca/projects/replacing-the-door-on-my-shopHere are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Can You Refinish Plywood Flooring? I Build It Home 2019-03-15 | A few obvious things: Yes, I make mistakes once in a while. Everyone does, especially if you try new things. Sanding an entire floor with this type of sander would take a while - roughly 3 hours for a 100 square foot room - but that's not a whole lot more than one of those big pad sanders that you can rent. Consider the time it takes to go get that sander and bring it back after you are finished.Also, I'm not going to do this, it was just a test. Even with the old finish sanded off, I still don't really like how it looks after the poly is brushed on - too raw looking, maybe. Stay tuned to see what I will do to fix these floors and give me the results I'm looking for.Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuildit#plywoodflooring#homeimprovementWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
How To Install Door Handles Without Messing Up I Build It Home 2018-11-23 | Easy to make a mistake when marking out the holes manually, so I always make a template to avoid problems and speed up the work.I filmed this back in September and kind of forgot about it until now. Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Making Drawers For Bottles And Cans - Space for 108 I Build It Home 2018-08-18 | I figured the cabinet beside the fridge would be a great place to keep the bottles and cans I use. There is space for a total of 108, 36 in each drawer.Before you start lecturing me on using bottled water, consider that my water supply here (a drilled well) doesn't provide good quality water. It's drinkable, but tastes terrible and the filter systems I've tried (and spent a lot of money on) don't improve it. Not that I should have to justify myself to anyone, but being a rude, judgemental hypocrite seems to be all the rage these days. Video on cutting the dividers to exact length:youtu.be/KS2Pg2W-TxEHere are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Making Cabinet Doors - Spray Finishing, Putting Them On and Fixing Problems I Build It Home 2018-08-15 | It took most of a full day and nearly 2 liters of water based poly to finish the doors with three coats front and back. I sanded between coats, 220 grit between the first and second, and 400 between the second and third. The hinge fix at the end may seem like butchery to the inexperienced idealists watching, but it's an example of a very common way to deal with a problem. The purest burns up a day resizing the door and refinishing it, while the realist spends 20 minutes mortising in two hinges. And, unless you know what to look for, it's a fix that will never been seen by the casual observer.Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
How to Make Great Looking Kitchen Cabinet Doors I Build It Home 2018-08-11 | Check out the build article for more details:ibuildit.ca/projects/how-to-make-frame-and-panel-cabinet-doorsHere are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Can You Save Money Building Your Own Kitchen? I Build It Home 2018-08-03 | Please read the blog entry that goes along with this (it actually helps to support the work I do making these videos):ibuildit.ca/blog/save-money-building-your-own-kitchenHere are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Pro Tips for Cutting and Installing Wood Trim I Build It Home 2018-07-28 | Continuing work on my kitchen cabinets, I made a simple trim molding to cover the gap between the top of the upper cabinets and the drywall bulkhead above. I made this from the same hard maple that I used for the face frames of the cabinets and finished it with three coats of water based poly before installing it.Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Making A Corner Cabinet / Kitchen Cabinet I Build It Home 2018-07-23 | Project build article:ibuildit.ca/projects/building-a-corner-cabinet-for-the-kitchenMaking the face frame video:youtu.be/pOYXgLWfZKQHere are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=h#ibuilditWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Moving Recessed Lights I Build It Home 2018-07-18 | I just finished making the upper cabinet for the corner in my kitchen (build coming soon), but before I can install it, I need to move a pot light. I installed the pot lights originally for a different cabinet layout, but change the design with this cabinet. These ones are easy, since they are the retrofit type and done have a box or hangers inside the ceiling. Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
How To Make Triangular Gable Vents I Build It Home 2018-07-01 | Build article for this project:ibuildit.ca/projects/how-to-make-triangular-gable-ventsHere are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Installing A Shower Door I Build It Home 2018-03-20 | Installing a swinging shower door using some unconventional methods. The make and model of the door is not important, since this video is more about the procedure than specific details related to the product itself.The kit came with stainless steel mounting screws for the hinge side frame, but they were too short to reach the framing inside the wall. I bought longer ones to replace the two at the top of the frame to anchor it better, since that carries the bulk of the weight of the door. Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Fixing A Poorly Aligned Drawer / Drawer Slide Problem I Build It Home 2018-02-05 | This video covers a SPECIFIC problem that may be hard to track down for those that don't know about it. It is not about making general alignment adjustments on drawer slides, since those are fairly obvious.Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Optimise The Space Under The Kitchen Sink With GIANT Drawers I Build It Home 2018-02-04 | I decided the best way to use the area beneath the sink in my kitchen was to make two large drawers. The lower one is deep enough to store spray bottles and cleanser bottle upright, along with paper towel rolls. The upper drawer is around 9" deep and will hold a variety of items. This is a great way to efficiently utilize a cabinet that is traditionally a catch-all for seldom used items and often poorly organized.Video on fixing the drawer alignment:youtu.be/mrtmtqeRNTMPS: Notice the continuity?Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
How To Paint A Panel Door I Build It Home 2018-02-01 | This is the method I use and recommend for painting panel doors. Basically the key point is to try to always follow the grain direction of the wood, even if the grain is stamped into masonite. And do areas in a logical order: trim, panels, rails, stiles, edges, top and bottom. Once you've started painting an area, move quickly to finish it to avoid smears and lap marks where the paint partially dried.Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
A Tour Of My Still Unfinished Kitchen And My Plans To Complete It I Build It Home 2018-01-30 | There were a couple of things that I left out of this, mainly because I haven't made up my mind whether I'll include them. One is what's known as an appliance garage that would go in the corner of the L of the countertop. It would have a roll up door and would contain small appliances like a food processor. Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
How To Install A Door / How To Hang A Door I Build It Home 2018-01-27 | Project build article with details on the butt hinge mortising template:ibuildit.ca/projects/install-door-hang-doorInstalling the door frame: youtu.be/A7UxJpqR2boBuilding the door: youtu.be/sm_rjAFxKdE Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
Installing A Towel Ring On Drywall I Build It Home 2018-01-18 | I recorded this more than 2 months ago and forgot about it, so here it is now :)Best method to install any kind of accessory like this is to either attach directly to a stud, or have solid blocking behind the drywall to screw it onto. Next best is a toggle bolt, like I used here. Avoid using those crappy plastic expanding anchors that come with these or the screw in type, since they won't hold long term. Here are some ways that you can help support the work I do in making these videos:Plans for sale:ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b
How To Install A Door Frame I Build It Home 2017-10-09 | Installing the door frame that I made from the parts in the previous video. After the frame is set, I usually like to hang the door to check the fit and tweak as needed, but since I'll be making the doors for these openings, I'll need to get that done before I can go any further.The shim jig: http://www.ibuildit.ca/Workshop%20Projects/Shop%20Tricks/tricks-37.htmlHere are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Making Modern Door Jambs I Build It Home 2017-10-08 | In this one I take some of the stock I planed smooth in the last video and make the parts for the seven door jambs I will need for the ground floor of my house.Here are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Making Trim And Molding From Recycled Boards - The Prep Work I Build It Home 2017-10-03 | These are the boards that were sheathing the walls inside the house, and I removed them earlier in the renovation to make the walls thicker for more insulation.While this was and will be more work, it does save money over buying new material. Since nearly anything I would do with this wood involves the same amount of work, there's no avoiding it if I want to use it.Here are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Making A Custom Mirror Frame I Build It Home 2017-09-23 | Moving forward with the bathroom finishing work, I need to get the mirror frame made that matches the vanity. The overall size of the mirror with the frame is 35.5 inches wide and 33.5 inches tall and it was designed to match the width of the vanity.Here are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Installing The Bathroom Vanity I Build It Home 2017-09-08 | Now that the carcass of the vanity is finished, it can be installed and the sink put in and hooked up. Like I said in the video, I need to get this cabinet in place to finish the tile base on the floor which wraps around the bottom of the vanity. In upcoming video(s) I'll build and install the three drawers, and make the drawer fronts that match.The video (25+minutes long) where I change the plumbing:youtu.be/wi90dnMoW2QHere are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Staining And Spray Finishing The Vanity Cabinet I Build It Home 2017-08-30 | I used Minwax red mahogany solvent based stain for the base colour, then sprayed on 4 coats of tinted polyurethane to deepen and enrich the colour. I topped that off with 4 more coats of clear satin polyurethane.The sprayer I'm using is a small touchup gun that's perfect for smaller projects like this.Here are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Building The Bathroom Vanity Cabinet - Part 1 I Build It Home 2017-08-27 | In this video, I build the base cabinet for the bathroom vanity. The design is fairly simple, just a box that will house three large drawers. The construction is barebones, using stretchers instead of a solid bottom shelf and a back panel, but has a solid maple faceframe attached to the carcass with biscuits and glue.In the next video, I'll apply the finish to this part of the cabinet. It will be stained a dark colour and I'll go through how I do that.The video on adding the supports to my miter saw station:youtu.be/RQTMjP6fODcHere are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Talking About How I Made My Shower While Making My Shower I Build It Home 2017-08-23 | Basically, I have absolute faith in how I'm building this shower and don't have any doubts about how waterproof it is. Sure, there are other, more expensive methods that may work better, but I don't think the extra cost is in any way justified. Here are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
How To Cut A Round Hole In Ceramic Tile I Build It Home 2017-08-21 | Not that difficult, even in porcelain tile which is much harder than ceramic. You do need to go fairly slowly and evenly, and keep the blade moving.Here are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Pebble Tile Shower Floor - Some Tips And Tricks I Learned I Build It Home 2017-08-19 | First really good tip is to lay out the floor of the shower on a piece of plywood or OSB so that you can cut the tiles to fit in that space. That way, you can get all of the tiles cut and ready to lay before you mix any mortar.The next is to not go heavy when spreading the thinset, since it will easily fill the gaps between the tiles and make it difficult to clean. If using regular sanded grout to grout the tiles, you could use that to set them as well, or possibly a premixed tile glue. If I did it again, I would just put a small dab of polyurethane construction adhesive on the back of each stone to cement it in place, then rely on the grout for the real holding power.I used epoxy grout and I like using this much better than regular grout. It's super strong, never needs sealing, never discolors and is easy to apply. For a floor this size (52" x 31") it did take more grout than I expected, so that's something else to look out for.Here are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
How To Make Drawers Fast And Easy I Build It Home 2017-08-06 | I consider this to be the easier and most economical way to build good quality drawers. If more strength is needed, my loose dovetails can be added after the drawers are assembled:http://www.ibuildit.ca/Workshop%20Projects/Jigs/easy-dovetail-jig.html Here are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Intentional Paint Drips? I Build It Home 2017-08-01 | Or that's the theory, anyway. I do know that usually vertical wood siding like this (board and batten, plywood, etc.) starts to fail at the bottom, so anything that can add more protection from water should help. Here are some ways that you can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Making A Wood Slat Feature Wall I Build It Home 2017-07-15 | Check out the build article here:ibuildit.ca/projects/rustic-wood-feature-wallHere are some ways that you can help support the work I do in making these videos:Plans for sale: ibuildit.ca/plansPatreon: patreon.com/user?u=865843&ty=hWebsite: ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Save Your Wood Floor From The EVIL Office Chair With These DIY Caster Coasters! I Build It Home 2017-03-06 | These bastards will wreck even the toughest hardwood floors, so I made these simple "coasters" to do two thinks: spread and cushion the load, and also keep the chair from rolling around. I made these from plywood, but solid wood would work as well.How to install and finish plywood flooring:http://www.ibuildit.ca/other%20projects/Home%20Improvement/more-plywood-floor.htmlWays YOU can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
Plywood Floor Durability - Scratch And Dent Test I Build It Home 2017-02-18 | A bit of a reality check on how the plywood floor holds up to scratches and dents when compared to other options. All real wood will scratch and dent and as shown in this video, and there really isn't that much of a difference between the plywood I used, and two of the more popular solid wood choices (oak and maple).The measurement for the dents were in thousandths of an inch.Wood hardness measurements came from The Wood Database:http://www.wood-database.comHow to install and finish plywood flooring:http://www.ibuildit.ca/other%20projects/Home%20Improvement/more-plywood-floor.htmlWays YOU can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/u/0/b/107142665853474113931
More About The Plywood Floor I Build It Home 2017-02-13 | The website article on laying and finishing this floor:http://www.ibuildit.ca/other%20projects/Home%20Improvement/more-plywood-floor.htmlMaking windows triple pane:youtu.be/4tTzl3atj4wWays YOU can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/+JohnHeisz
How To Install And Finish Plywood Flooring I Build It Home 2017-02-11 | Way more details in the website article: http://www.ibuildit.ca/other%20projects/Home%20Improvement/more-plywood-floor.htmlYou can now follow what I'm doing on Instagram: instagram.com/i_build_it.caWays YOU can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.caGoogle+: plus.google.com/+JohnHeisz
Super Cheap Super Easy Shelves For A Closet I Build It Home 2017-02-08 | You can follow what I'm doing on Instagram: instagram.com/i_build_it.caA quick one but useful for those of you that want to add a lot of shelf space to a closet, but don't want a permanent install. This cost me less than $30 in total - 1-1/2 sheets of OSB, 2 - 2x4's and some scrap plywood for cleats. Spacing for the shelves can be fixed, or adjustable using shelf pins and holes. You can add support to the shelves in many ways if you are loading them with heavy stuff.Also, I'm trying out a new upload resolution - 1440p - to see how that looks. Ways YOU can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=hWebsite: http://www.ibuildit.caFacebook: facebook.com/I-Build-It-258048014240900Instagram: instagram.com/i_build_it.ca
How To Patch A Hole In Drywall I Build It Home 2017-01-04 | Yes, I deliberately and willfully punched a hole in my wall to do this. BUT, no big deal since I can easily fix it!The How To Drywall Without Sanding series:youtube.com/playlist?list=PLa_LF7NakW2pwvEB3g5NQswY-LTFJ7BNxWays YOU can help support the work I do in making these videos:Plans for sale: http://www.ibuildit.ca/plans.htmlPatreon: patreon.com/user?u=865843&ty=h
The Disappearance Of Mary Sue McKleven I Build It Home 2016-10-30 | Happy Halloween :)Story and narration by Don Heisz. Don writes the always entertaining "Offcuts":ibuildit.ca/offcutsThis is a long abandoned house we found back in September when we went out for a day looking for dilapidated and falling down barns. It was a very creepy location, well back from the main road. I can't say with any certainty if there was every a cannibalistic clan living there, but it's easy to imagine there was :DOf course, Mary Sue McKleven is entirely fictitious and resembles no person living or dead.Ways YOU can help support the work I do in making these videos:Plans for sale: ibuildit.ca/plansMaking these videos is expensive and time consuming, and you can help by becoming a supporter of this channel on Patreon. For as little as $1 per month, you'll get early access to regular videos and also exclusive videos made just for my Patreon supporters!patreon.com/user?u=865843&ty=h
Cutting Down A Huge Maple Tree - Tree Removal I Build It Home 2016-10-17 | Some video on cutting down one of the big sugar maples out front.The other tree cutting video: youtu.be/q5ONNqwILyUContact Darren Wood (Big Wood Tree and Yard) in the Orillia area.Ways YOU can help support the work I do in making these videos:Plans for sale: ibuildit.ca/plansMaking these videos is expensive and time consuming, and you can help by becoming a supporter of this channel on Patreon. For as little as $1 per month, you'll get early access to regular videos and also exclusive videos made just for my Patreon supporters!patreon.com/user?u=865843&ty=h
My Drive To Ottawa Taking Pictures Of Old Barns Along The Way I Build It Home 2016-09-20 | Please note: I'm not a professional photographer and I'm not pretending to be one. But, I do know what looks good to me, and how to use the camera somewhat competently :DAs explained in the video, the biggest problem (other than not finding any truly dilapidated buildings) was access to take the pictures. Many I had to take from a distance or at an angle that wasn't ideal. In spite of that, I am very happy with what I did get. Some of the pictures have more post processing than others, mainly to highlight what I thought of as the mood. A few of the ones that slideshow at the end of the video were processed differently, and every photo throughout the video was edited in some way. I left on the morning of the 14th, and got to Ottawa on the morning of the 15th. My route more or less followed highway 7 all the way, with a lot of weaving back and forth to take sideroads.The live Q&A was with Matthias Wandel at his house, in his shop. If you would like to watch a recording of it, here's a link to the video:youtube.com/watch?v=kY3juGRix00
Grouting Ceramic Tiles I Build It Home 2016-08-05 | I hate grouting! It's probably one of my least favourite home improvement projects, but it has to be done.I think that overall, it would have been just as easy to use the type of epoxy grout I used for the countertop instead of this cement based grout, so for future projects I'll use that instead. More expensive, but the results are 100x better.Ways YOU can help support the work I do in making these videos:Plans for sale: ibuildit.ca/plansMaking these videos is expensive and time consuming, and you can help by becoming a supporter of this channel on Patreon. For as little as $1 per month, you'll get early access to regular videos and also exclusive videos made just for my Patreon supporters!patreon.com/user?u=865843&ty=h
Laying Ceramic Floor Tile I Build It Home 2016-07-31 | Laying roughly 170 square feet of porcelain tile in the new kitchen. The layout is diagonal to follow the junction between the living room / hall and the kitchen area, and I thought it would look more interesting. It's more work doing it on an angle like this, since my tile cutter isn't big enough to handle these cuts, so I had to do them all on the tub saw.The first part of the floor was sloping down and I had to build that up so that the tiles would look flat. But the rest of the floor was new and perfectly flat already, and it went a lot quicker there. Ways YOU can help support the work I do in making these videos:Plans for sale: ibuildit.ca/plansMaking these videos is expensive and time consuming, and you can help by becoming a supporter of this channel on Patreon. For as little as $1 per month, you'll get early access to regular videos and also exclusive videos made just for my Patreon supporters!patreon.com/user?u=865843&ty=h
Epoxy Grout The Counter Top I Build It Home 2016-07-27 | This ain't your grandma's tile countertop! Epoxy grouting the counter top went very well and I'm glad I decided to hold out for it. It's not really more difficult to use than the regular, cement based grout, but is on a whole other level of durable and stain resistant. Build article for the countertop: ibuildit.ca/projects/installing-tile-countertopWays YOU can help support the work I do in making these videos:Plans for sale: ibuildit.ca/plansYou can watch these videos a day before anyone else by becoming a supporter of this channel on Patreon. For as little as $1 per month, you'll get early access to regular videos and also exclusive videos made just for my Patreon supporters!patreon.com/user?u=865843&ty=h
How To Install A Tile Counter Top I Build It Home 2016-07-15 | Build article:ibuildit.ca/projects/installing-tile-countertopI decided to order the epoxy grout and should have it in about a week. In the meantime, I'll get started on the floor tiles.Details on the kitchen in my last house:ibuildit.ca/projects/my-big-kitchen-renovationIf you like these videos and build articles, you can help to support their creation by pledging a small amount on Patreon:patreon.com/user?u=865843&ty=hYou'll have access to exclusive videos and can watch regular release videos a day ahead for as little as $1 per month.
How To Make A Spice Drawer - Kitchen Cabinet Build I Build It Home 2016-07-09 | Art's channel:youtube.com/user/wordsnwoodThe drawer slide jig build video: youtu.be/fLiBV9MRPmEPlease check the marking jig build article for more detail:ibuildit.ca/tips/install-drawer-slides-the-easy-wayMy main woodworking channel:youtube.com/user/jpheiszIf you like these videos and build articles, you can help to support their creation by pledging a small amount on Patreon:patreon.com/user?u=865843&ty=h
How To Make Drawers The Easy Way - Kitchen Cabinet Build I Build It Home 2016-06-29 | How to make the crosscut sled I used in this one:ibuildit.ca/projects/norms-crosscut-sledThe easy dovetails jig build article:ibuildit.ca/projects/dovetails-the-easy-wayThe video on my main channel using the dovetail jig:youtu.be/MSmDWp9oLrsThe mini table saw sled:ibuildit.ca/projects/mini-table-saw-sledThere will be more details on the kitchen build coming soon in a website article.If you like these videos and build articles, you can help to support their creation by pledging a small amount on Patreon:patreon.com/user?u=865843&ty=h
Making Windows Triple Pane I Build It Home 2016-06-19 | After adding the storm to the outside, I decided I should take the time to make and install the new sash on the inside. This makes the window units triple glazed and should be a good bit more efficient than they were before.
