Cobra Framebuilding
TIG Welding Setup for Bicycle Framebuilding
updated
Over 3 years and 100 fixtures sold, a lot of details have changed and for the better.
The new Bottom Bracket Wing Stud - The Big Winger - removes the need for the 6mm Allen wrench. It's one less thing to run after while building a bike.
The Millimeter scales are better now - easier to field install, more accurate, better looking, and more durable.
The way that we package it for shipment is more secure and saves the customer a lot of money on the cost to ship.
The tube-holder supports are updated and expanded for more uses and better usability.
The Dummy Axle Holder locks up better and has integrated mounts for the Stay Tip Holders.
Even little details like the Main Extrusion Caps are updated for better performance and cosmetics.
We keep the frame fixture in stock and ready to ship. Reach out today with any questions you may have or to order your own.
www.cobraframebuilding.com
CHAPTERS:
0:00 Intro
0:21 Three Years/100 Sold
0:50 Big Winger
1:41 Millimeter Scales
3:05 Packing/Shipping Optimization
5:15 Updated Holders
6:08 Added Front Holders
7:29 Updated Rear Holders
9:26 Updated DA Holder
10:34 Updated Extrusion Caps
13:34 Like and Subscribe ;)
Here we are showing the process of mitering and then welding the tubes without removing them from the fixture. This is a sub-assembly process and it's a pretty cool workflow. After these steps you have the heart of the bike frame. It's a really good way to start your build.
You can learn more about the Stay Slayer at our website.
cobraframebuilding.com/product/the-stay-slayer
Follow this link for all of the free information and parts we sell:
cobraframebuilding.com/fixture-stand-resources
Order yours here:
cobraframebuilding.com/product/the-stay-slayer
The Resources Page (3D Printed Guides and Tooling Available Here)
cobraframebuilding.com/stay-slayer-resources
Toss some tubes in this tool and toss it on your milling machine. Using a hole saw you can miter / notch / cope the tubing to fit together. Building bicycles is challenging and the rear end of the bike is much harder than the front. Take advantage of all of the great features and capability of this tool in your shop.
First we have to saw the plate up using the Clausing C12AX automatic horizontal band saw. What a machine! It's still a lot of steps because it's plate and not flat bar stock with 2 outside dimensions already where we want them.
Next we load a new endmill in a shrink fit toolholder. I show my DIY induction heater for this process.
Then we load the raw stock into my Pierson Rotovise for Op1. I did the best I could to get good shots of the machining, but it's tricky!
Then the parts are loaded into the Op2 fixture for the last bit of machining.
You can check out these parts and everything else we make/sell at www.cobraframebuilding.com/store
Follow along on Instagram @cobraframebuilding and subscribe to the Shut Up and Build Bikes Podcast while you're at it.
You can check out the tools showcased in the video on our webstore.
The Miter Buddy was useful for holding 3/4" (19mm) and smaller tubing for mitering.
cobraframebuilding.com/store/p/miter-buddy
The Miter Daddy was useful for holding the larger tubing for mitering.
cobraframebuilding.com/store/p/the-miter-daddy
Read more and order yours here:
cobraframebuilding.com/store/p/the-creator-fork-fixture-pre-order
We'd love to be part of your framebuilding journey.
Purchase The Creator Fork Fixture Here:
cobraframebuilding.com/store/p/the-creator-fork-fixture-pre-order
Every Creator Frame Fixture comes ready to accept the fittings in this kit, and the install is very simple. If you follow all of the steps in this video you'll have the hose and manifold routed super neatly.
You can learn more about The Creator Frame Fixture here:
cobraframebuilding.com/store/the-creator-frame-fixture
I talk about what these variables are, how to find them in Bike CAD, and how the fixture adjusts with them.
Joe is building a hybrid bike for his girlfriend. It's pretty solid and simple. It won't impress any weight weenies or parts snobs, but it allows her to get on a better-fitting bike and Joe can practice the craft of framebuilding, which he loves.
Zack is building himself a new hardtail MTB. 29 x 2.5" tires, boost spacing, 130mm fork, and a 31.6 x 170mm dropper seat post. Zack wanted to bend a bunch of the tubes and get to know the Cobra Toob Bender, too, so that's what he did.
Make sure to subscribe so you can see updates on these bikes as we develop and finish them.
Timestamps:
0:00 Introduction
0:32 Lista Cabinets
1:58 Shipping Area
2:58 Zach's Desk
4:58 3D Printer
6:34 Assembly Bench
8:41 Forklift
10:14 TIG Welding Area
14:32 Material Storage
15:26 Bandsaw
20:19 Belt Sander Setup
21:49 Frame Fixture
23:47 Granite Table
27:09 CNC Lathe
32:08 CNC Mill
37:13 Hallway
39:22 Workbench
41:57 Load Center
42:43 The "Living Room"
44:33 Bathroom / Kitchenette
BUY COBRA TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com
WATCH my 2019 Shop Tour: youtube.com/watch?v=zTXVY6XxMD0
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding
- Watch my 14-minute video overview of the fixture here: youtube.com/watch?v=Tc3Osv5pE6Q.
- Read more about the fixture here: cobraframebuilding.com/store/the-creator-frame-fixture.
- Email me with your questions about the fixture and whether it's right for you: joe@cobraframebuilding.com.
Subscribe for more videos on bicycle framebuilding and bicycle framebuilding tools, including more videos on frame jigs.
Watch my 14-minute video about The Creator frame fixture here: youtube.com/watch?v=Tc3Osv5pE6Q.
Read more about The Creator Frame Fixture here: cobraframebuilding.com/store/the-creator-frame-fixture.
Email me with your questions about the fixture and whether it's right for you: joe@cobraframebuilding.com.
Watch the full fixture overview here: youtube.com/watch?v=Tc3Osv5pE6Q.
Read more about The Creator Frame Fixture here: cobraframebuilding.com/store/the-creator-frame-fixture
In this video I go over the basic design and features of my bicycle framebuilding fixture. This tool is used to hold the discrete parts of the bike frame for welding, brazing, epoxy bonding, or otherwise fabricating a bicycle.
I talk about the features, show how slick it is, and explain how it is used and what is involved when using it. You can read more about it at http://cobraframebuilding.com. Reach out to me to talk more about it and get one for your shop: joeroggenbuck@gmail.com.
I've made some other videos about BikeCAD, and while I LOVE and recommend BikeCAD, there are some additional things you can do with 3D CAD software like Fusion 360—specifically by using parameters.
I hope this demonstration might pique your interest to explore this software more if you're new to it!
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
Here are the two podcast episodes I mentioned in the video:
• Ep. 9 with Brian Chapman (Chapman Cycles): cobraframebuilding.com/podcast/ep-9-brian-chapman-of-chapman-cycles
• Ep. 11 with Drew Guldalian (Engin Cycles): cobraframebuilding.com/podcast/ep-11-drew-guldalian-of-engin-cycles
Drew not only has several dedicated horizontal and vertical mill setups for different steps in the framebuilding process, he also has a Sputnik frame jig, multiple CNC machines, lathes, and all kinds of other little machines and tools.
If you want some inspiration for what a fully built out framebuilding shop can look like, I think Drew's shop is one of the best places to look. So stoked I got to record this shop tour!
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
Outro music by Urpleactus: urpleactus.bandcamp.com
First, I lift up the mill to build a pallet underneath it. Then, I slide a pallet jack under the mill, and I pull it onto a trailer. I like the drop-deck trailer I show in the video. Then I also use a come-along tool to pull the Bridgeport onto the trailer. Then I just strap it down with ratchet straps.
Warning: Moving a milling machine on your own is dangerous, serious work. In this video, I show my process for doing it. But I make no claim that it's safe to do this yourself.
SUBSCRIBE for more videos on bicycle framebuilding and other shop topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
Time to paint my mountain bike frame—with spray paint. I'm calling the theme "Midnight Snake." It's black with salmon and turquoise accents. Watch as I paint the bicycle and then apply a Cobra Frames head badge, too.
I got the paint from Spray.Bike. I'm a big fan of Squid Bikes (squidbikes.com), and they do all of their wacky paint jobs with Spray.Bike spray paint. So I reached out, and Spray.Bike sent me a few rattle cans for this video. So they're officially the video sponsors; check 'em out: spraybike.us
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
After what I show in the video, I'm going to go over the frame with some Scotch Brite and then spray another coat of primer. Then in the next video, we'll do the wacky multiple-color spray paint job using spray.bike! Who's excited?
Here's the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
Dropper seatposts are relatively new, and there's no single agreed-upon standard for how to route the cable. The cable needs to end up INSIDE the seat tube. I decided to replicate what I've seen some other steel frame builders do: I brazed on a little reinforcing patch (cut from another steel bicycle tube), and then I made a hole in that reinforced area for the cable to pass into the seat tube. So the cable will come down on the down tube and then pass into the seat tube through that hole, and meet the bottom of the dropper seatpost in there.
This was a difficult task with the seat tube already welded into the frame and without the right set of tools at my disposal. In the end, I tried a few different tools to get the job done—drill, end mill, hand files, and Dremel.
At the end of the video, I also talk about what I'm doing for paint. I'm using some rattle cans from Spray Bike. They were nice enough to give me these cans free as a sponsor, so check them out: spraybike.us
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
Here's the podcast episode I mentioned with Drew Guldalian of Engin Cycles in the video: cobraframebuilding.com/podcast/ep-11-drew-guldalian-of-engin-cycles
So, for the head tube reaming and facing, I'm using a Park Tool head tube reamer/facer. In case you're not familiar with it, I give some background on the Park Tool reamer/facer, then I show the process for how to get a nice full clean up and make sure the headset will fit snug inside.
For the seat tube reaming, I used an adjustable reamer with straight blades that I'm actually not a huge fan of—but it was affordable. I also talk in the video about why helical reamers are better for seat tube reaming if you can afford one.
For the seat tube slotting operation, I use a homemade seat tube slotting tool that I made based on one I saw Drew Guldalian from Engin Cycles using.
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
As I explain in this video, Adam has a ton of relevant experience on this. So even though I know that a lot of great bicycle framebuilders DO silver braze their seat stay bridges, I decided to go with his advice.
So in this video, I'm removing the seat stay bridge, cleaning up the stays, and then TIG welding it back in. I show this whole process, so you can see how to undo your mistakes—at least if your mistake is silver brazing in something you shouldn't have.
While I've got the TIG welder out, I also weld on the ISO brake tab that I fit up in a previous video, along with the brace tube to reinforce it. Just a few more steps now, particularly with the finish machining, and we'll be ready to paint this bike frame!
Here's the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
For more videos on TIG welding in the bicycle framebuilding context, check out my TIG playlist here: youtube.com/watch?v=hZhaxQe67sQ&list=PLh0BOtXK_s5dBZa0l7hjPTyE3RXCvanrg
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
MUSIC:
Inossi - Stories (soundcloud.com/inossi)
Waywell - Feather (soundcloud.com/waywell)
Urple Actus - Sunshine (soundcloud.com/urpleactus)
I show a lot of the brazing up close, sharing tips about what to watch for to make sure you don't cook the joints and burn up the flux. I also share my thoughts about where I'm placing the braze-ons on the bike and why. At the end I discuss some tips for cleaning the flux off the frame.
Here's where you can buy the brazing clamps I use in this video: cobraframebuilding.com/store/braze-on-clamps
Here's where you can buy the cable guides I referred to: framebuildersupply.com/collections/guides/products/stainless-hydro-guide-10-pack?variant=33338321999
This video does cover some of my overall equipment choices when silver brazing and my setup. However, for a full overview of my brazing setup for bicycle framebuilding, check out this video: youtube.com/watch?v=MEyrrLEq-lg
Here is the playlist of the whole Hardtail Mountain Bike Frame Build: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
MUSIC:
A Himitsu - Reminisce (soundcloud.com/a-himitsu)
Inossi - Stories (soundcloud.com/inossi)
Waywell - Feather (soundcloud.com/waywell)
mezhdunami - The Shining (soundcloud.com/mezhdunami)
Urple Actus - Sunshine (soundcloud.com/urpleactus)
Urple Actus - Landing (soundcloud.com/urpleactus)
For this bike, I'm using an ISO disc brake tab, believe it or not. In the video I explain why I chose to use the ISO standard instead of post mount or flat mount. (Partly it's just because I already have a good tool for adding ISO brake tabs; it's Anvil Bikeworks' lSO Rear Disc Brake Tab Fixture, aka “Feng Shui.")
Here's a PDF on disc brake mounting specifications for the international standard (IS): magura.com/media/1997/is_e_09-12-02_11.pdf
I show a bunch of the process of grinding the disc brake tab to fit up against the seat stay. First I was using a disc brake tab from Nova Cycle Supply. Then I botched that one, so I used one from Paragon Machine Works. I was using my new Metabo angle grinder, and I was really having too much fun removing the material.
Here's the Metabo angle grinder if you're interested in checking that out: amazon.com/Metabo-WP9-115-Grinder-Non-locking-Paddle/dp/B00WJOWTKE
Toward the end of the video, I miter the seat stay bridge. For this, I use a DIY framebuilding tool based on a design by Sputnik Tool. I really think this setup is slick for mitering the seat stay bridge.
Here's my interview with Carl Strong (Strong Frames and Pursuit Cycles) I mentioned, from the Shutup and Build Bikes Podcast: cobraframebuilding.com/podcast/ep-7-carl-strong-of-strong-frames-and-pursuit-cycles
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframebuilding.com.
FOLLOW my shop updates on Instagram (@cobraframebuilding): http://instagram.com/cobraframebuilding.
MUSIC:
Inossi - Stories (soundcloud.com/inossi)
Peyruis - Reveur (soundcloud.com/peyruis)
Urple Actus - Sunshine (soundcloud.com/urpleactus)
Muciojad - Troubleshooter (soundcloud.com/muciojad)
Waywell - Feather (soundcloud.com/waywell)
mezhdunami - The Shining (soundcloud.com/mezhdunami)
This video covers the tack welding and finish welding. It was a HOT day for TIG welding, and my biggest struggle was just finding the right position to get at the work and comfortably weld them seat stays.
My apologies if some of the steps in this frame build series are a little repetitive. Of course, a lot of the steps for TIG welding seat stays are going to be similar to TIG welding the chainstays and other tubes. But I hope you enjoy seeing the whole build as it progresses.
Next, I'll be adding a seat stay bridge and a brake tab!
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
Here's that Shut Up and Build Bikes podcast interview I mentioned with Wade Beauchamp from Vulture Cycles: cobraframes.net/podcast/ep-6-wade-beauchamp-of-vulture-cycles
For more videos on TIG welding in the bicycle framebuilding context, check out this playlist: youtube.com/watch?v=hZhaxQe67sQ&list=PLh0BOtXK_s5dBZa0l7hjPTyE3RXCvanrg
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
MUSIC:
Urple Actus - Landing (soundcloud.com/urpleactus)
Joakim Karud - Rock Angel (soundcloud.com/joakimkarud)
Muciojad – Before I Sleep (soundcloud.com/muciojad)
Urple Actus - Please Hold (soundcloud.com/urpleactus)
Muciojad - Troubleshooter (soundcloud.com/muciojad)
Specifically, I use my Miter Buddy tool to help with holding the seat stays while mitering the dropout end. And then I bring out my old DIY seat stay mitering fixture—and make a modification to it—to help with the miter that fits the seat stays up to the seat tube.
You'll also see another good demonstration of my Cobra tube bender at work. We're doing a single-bend rear-end in this case, but note that my bender can also do s-bend seat stays, as I've shown in a separate video on this channel.
My tube bender for bicycle framebuilding: cobraframes.net/store/tube-bender
My Miter Buddy tool: cobraframes.net/store/miter-buddy
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
For more videos on tube bending in the bicycle framebuilding context, check out this playlist: youtube.com/watch?v=MhzEMHOGNPs&list=PLh0BOtXK_s5d9Lha5NpJbYjZZedlJM1uX
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
MUSIC:
Urple Actus - Star Eyes (soundcloud.com/urpleactus)
Muciojad - Aerial Ace (soundcloud.com/muciojad)
Urple Actus - Landing (soundcloud.com/urpleactus)
Muciojad - Pennsylvania Forecast (soundcloud.com/muciojad)
Along with beautiful action shots of all that TIG welding, I discuss a few other things that come up: checking rear-end alignment, using a Park Tool bike stand while welding out the frame, what it's like welding different diameters of bike tubing versus the straight part of the chainstay yoke, and how forward-geometry mountain bike design is pushing the limits of common bicycle framebuilding tools.
Next, we'll be bending and mitering the seat stays, so we can finish welding out the rear end of the bike!
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
For more videos on TIG welding in the bicycle framebuilding context, check out my TIG playlist here: youtube.com/watch?v=hZhaxQe67sQ&list=PLh0BOtXK_s5dBZa0l7hjPTyE3RXCvanrg
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
LISTEN to my podcast all about bicycle framebuilding, the Shut Up and Build Bikes podcast: http://cobraframes.net/podcast
MUSIC:
Kontekst - Buddha (soundcloud.com/kontekstmusic)
Urple Actus - Please Hold (soundcloud.com/urpleactus)
Urple Actus - Landing (soundcloud.com/urpleactus)
Muciojad - Pennsylvania Forecast (soundcloud.com/muciojad)
Urple Actus - Sunshine (soundcloud.com/urpleactus)
Of course, I use my Cobra tube bender to bend the chainstays. If you're interested in a tube bender that was designed specifically for bicycle framebuilding in a small shop, check it out at cobraframes.net/store/tube-bender.
For the chainstay mitering, I had to come up with my own solution since I don't have a chainstay mitering fixture. (And maybe it would have been complicated even with a chainstay mitering fixture, due to the chainstay yoke.)
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
For more videos on tube bending in the bicycle framebuilding context, check out this playlist: youtube.com/watch?v=MhzEMHOGNPs&list=PLh0BOtXK_s5d9Lha5NpJbYjZZedlJM1uX
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instag
ram (@cobraframes): http://instagram.com/cobraframes.
MUSIC:
Urple Actus - Landing (soundcloud.com/urpleactus)
Urple Actus - Sunshine (soundcloud.com/urpleactus)
Urple Actus - Please Hold (soundcloud.com/urpleactus)
Muciojad - Pennsylvania Forecast (soundcloud.com/muciojad)
Joakim Karud - Rock Angel (soundcloud.com/joakimkarud)
First, I show the setup I have for checking the alignment of the bike frame during the TIG welding process. (I come back to check the alignment just a couple times during welding.) I also mention what I think a more ideal setup for alignment would look like, using an example from Engin Cycles.
Then we get into welding out the front triangle of the bike frame. It goes pretty well. The main problem I run into is where the downtube meets the seat tube at the bottom bracket. I had a small hole burn through the down tube right where it came to a point. I explained my thought process for how to go about fixing it.
Next, we'll be getting into building out the rear end of the bike frame!
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
For more videos on TIG welding in the bicycle framebuilding context, check out my TIG playlist here: youtube.com/watch?v=hZhaxQe67sQ&list=PLh0BOtXK_s5dBZa0l7hjPTyE3RXCvanrg
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
MUSIC:
Urple Actus - Landing (soundcloud.com/urpleactus)
Urple Actus - Please Hold (soundcloud.com/urpleactus)
Muciojad - Troubleshooter (soundcloud.com/muciojad)
Muciojad - Pennsylvania Forecast (soundcloud.com/muciojad)
Muciojad - Aerial Ace (soundcloud.com/muciojad)
Before I can actually do any of the welding, though, I had to spend a while with the belt sander and with some acetone, cleaning off the mill scale and then cleaning the tubes for welding. So I showed that process, too.
I generally use the frame jig to help me tack weld the frame together, and then I actually do the finish welding out of the frame jig.
I tried to explain my thought process as I was showing the tack welding for the front triangle: Where I'm placing the welds, why I'm using filler instead of just fusion welding, and other considerations.
In the next video, we fully weld out the front triangle of the bike frame!
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
For more videos on TIG welding in the bicycle framebuilding context, check out my TIG playlist here: youtube.com/watch?v=hZhaxQe67sQ&list=PLh0BOtXK_s5dBZa0l7hjPTyE3RXCvanrg
Check out Carl Strong's Youtube videos here (I mentioned them in the video): youtube.com/channel/UC0jC1DicYm1J0ZlmaxJqNKA
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
MUSIC:
"Dixxy - Cool Nights" (soundcloud.com/dixxy-2)
"urpleactus - Sunshine" (soundcloud.com/urpleactus)
"Joakim Karud - Rock Angel" (soundcloud.com/joakimkarud)
"Muciojad - Before I Sleep" (soundcloud.com/muciojad)
This week, we complete the somewhat tricky tube notching for where the down tube, seat tube, and bottom bracket all come together. I do it with hand file mitering, and it takes a little while, sneaking up on the exact fit. Then we drill water bottle boss holes and move onto the top tube.
The top tube mitering is pretty simple compared to what needed to be done for the down tube and seat tube on this bike. By the end of the video, we have successfully mitered and fit up all the main tubes of the frame, completing the front triangle. Next, we'll be cleaning and preparing all these tubes for welding, then tack welding it together in my framebuilding jig (frame welding fixture).
Here's the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
PODCAST: Check out the Shut Up and Build Bikes podcast, up now at http://cobraframes.net/podcast!
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
MUSIC by urpleactus (soundcloud.com/urpleactus), except the last song used is by Wanderflux (soundcloud.com/argofox/wanderflux-visions).
Listen at my website right now: http://cobraframes.net/podcast
(Links coming soon for Spotify, Apple Podcasts, and Google Podcasts!)
I've been dropping references to the Shut Up and Build Bikes Podcast for months, but episode 1 is finally up to listen to. In the first episode, I interview Kris Henry from 44 Bikes. I included a short preview at the end of this video, but you'll want to go listen to the full episode at the link above.
On the Shut Up and Build Bikes Podcast, I will interview established bicycle framebuilders and others in the broader bicycle framebuilding world and share the conversations with you. My goal is to produce a valuable resource for new and established framebuilders, as well as those who are just curious about the process.
Listen in, and let me know what you think! New episodes every Monday!
--
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
MUSIC: "Oceanwip3" by urpleactus
First, I cover a bit about tube rolling and dealing with bicycle-specific tubing (butted tubes, specifically). I discuss how I rough cut my tubing to length and how I use BikeCAD to determine the length and angles I need for mitering. Then I make the miters at both ends of the downtube (using hole saws in a Bridgeport vertical mill), and I demonstrate how to fine-tune the fit-up between the downtube and head tube with a hand file.
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
MUSIC: "Star Eyes" by urpleactus (soundcloud.com/urpleactus)
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
MUSIC: Polaroid - Extenz
Here's the full playlist of the Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
Here's a full demo of my Cobra tube bender (or Toob Bender) specifically developed for bending thin-wall bicycle tubing: youtube.com/watch?v=Z6Gu2UniJT8. And here's the sales page for more info: cobraframes.net/store/tube-bender.
SUBSCRIBE for more videos on bicycle framebuilding: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
Spoiler: I personally like to use both TIG welding (for the main joints of the bike) AND brazing (for braze-ons and other details). But the right choice for you depends on what style of bicycles you want to build, along with your budget, the total volume of bikes you want to produce, and more that I cover in the video!
For more videos on TIG welding in the bicycle framebuilding context, check out my TIG welding playlist here: youtube.com/watch?v=hZhaxQe67sQ&list=PLh0BOtXK_s5dBZa0l7hjPTyE3RXCvanrg
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
Today I'm going over many different kinds of head tube badges and some of my favorite examples. I discuss how I got the etching done on my own head badges and bent them to fit the head tube. Along the way, I'll talk about related issues of branding and logo placement on the bicycle, as well as the very practical issue of how to attach the head badge onto the head tube.
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
First, I give a brief overview of my manual lathe, and I show one way to hold a head tube in a lathe that provides access to its full length. Then I rough out the radii at each end of the head tube for a more distinct shape, and I turn the length of it down just a bit.
I finish by polishing off the head tube in a pretty dangerous way with a hand file and Scotch Brite, which I don't actually recommend. Be very cautious with your safety when working with a lathe, especially if you're trying anything like this.
Hopefully, watching this gives you some ideas for how you might machine your own custom head tubes on a manual lathe!
Here's the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
MUSIC by Joakim Karud: "Rock Angel" and "Piano & Sax" (soundcloud.com/joakimkarud)
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
In this video, I'm attempting to do this myself, for the first time. Honestly I didn't do a perfect job. But I think I was able to share a good deal of tips for measuring bike geometry, and I think this general idea is solid, and something I would recommend to other bicycle framebuilders. Let me know what you think!
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
You don't need studio lights or the best camera on the market. By using ambient natural light, propping the bike up with a stick, and just a few other tips, we can get pretty good results pretty easily.
Two sources that taught me a lot of what I know on this subject:
- For bicycle photography specifically: John Watson (theradavist.com/).
- For photography more generally: Jared Polin (youtube.com/user/JaredPolin).
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
Here are the websites featured in the video:
Wicks Aircraft and Motorsports: http://www.wicksaircraft.com/index.html
Paragon Machine Works: paragonmachineworks.com
Nova Cycles Supply: cycle-frames.com/bicycle-frame-tubing
Bicycle Fabrication Supply: bikefabsupply.com
Here's the playlist of the Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
My recommendation is to get a vertical milling machine like the Bridgeport mill first. It's such a versatile machine tool—you can do just about everything on it, as I explain in the video. Next, if you've got more cash and space, I'd recommend a manual lathe for round parts, a few specific framebuilding processes, and general usefulness in the shop.
I would only recommend horizontal milling machines if you're getting into serious production and want to speed up your framebuilding process by having multiple mills with dedicated mitering setups on each.
And I'd only really recommend a CNC mill for bicycle framebuilding if you're someone who wants to create your own custom frame components that nobody else has (braze-ons, dropouts, etc). It's not going to save you money over just buying the same things stock from Paragon Machine Works.
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
I demonstrate facing, turning, chamfering, drilling, boring, and parting, and I talk about how to do threading on a lathe, as well. I talk about how lathes can be used for post-welding machining on the headtube and bottom bracket, how they're used for mountain-bike seat collars, and how they can be used for crown-race-seat machining on forks. I talk about how bicycle framebuilders like Firefly Bicycles and Number 22 Bicycles use CNC lathes to butt titanium tubes. I mention various other uses for a lathe in bicycle framebuilding, as well as other tasks I've been able to use my lathe for, from my framebuilding fixture to the PVC pipes I use for welding rod storage.
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
I forgot to mention: My shop is about 400 square feet, and it's part of a larger building with 3-phase power and compressed air.
I'm blessed to have two Bridgeport milling machines, one manual and one CNC. I've got a Clausing lathe, an Everlast TIG welder, an oxy-acetylene torch, a DeWalt metal chopsaw, a nice heavy wooden workbench, a 1" belt sander, a couple Kurt vises and an Orange vise, a pedestal grinder, and a few good tables and cabinets.
I refer to many other videos throughout this shop tour because I've already covered many of the workspaces, machines, and setups in-depth in other videos. Here's a list of those other videos:
Workbench setup: youtube.com/watch?v=SkfTu_nSWj0
TIG setup: youtube.com/watch?v=sXW4sxOgeT8
Brazing setup: youtube.com/watch?v=MEyrrLEq-lg
Rolling table: youtube.com/watch?v=mKJvGnIPr_8
Chopsaw: youtube.com/watch?v=G6nD1R343fs
Frame fixture 1: youtube.com/watch?v=G6qHpFJeAls
Frame fixture 2: youtube.com/watch?v=GHHjo-D1lsM
Bridgeport mill: youtube.com/watch?v=ncJx7g3ELJ0
Hope you enjoyed my shop tour! Honestly my shop is always changing and evolving, so maybe I'll be due for another update before too long.
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
In this video, I demonstrate how to miter bicycle tubing in a simple workbench with a hand file and fit it up to another tube. I also cover how to miter at a specific angle with a bevel protractor, as well as how to hold the tubes in your vise without crushing them or having them slide around on you.
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
For more videos on tube bending in the bicycle framebuilding context, check out this playlist: youtube.com/watch?v=MhzEMHOGNPs&list=PLh0BOtXK_s5d9Lha5NpJbYjZZedlJM1uX
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
Along with showing the revisions I've made in BikeCAD and some modeling in Fusion 360, I discuss the importance of always recognizing which measurements on the bike frame really matter. What are those most salient, driving dimensions in a hardtail mountain bike frame, and how do those dimensions affect the riding experience?
Big thanks again to Peter Verdone, Matt from Quiver Design Works, Nicholas Jensen, and everyone else helping me work through my first hardtail mountain bike design.
Here is the playlist of the whole Hardtail Mountain Bike Frame Build—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.
Big thanks to Adam Sklar (Sklar Bikes) and Peter Verdone (PVD) for helping me with details of this bike design. Peter Verdone's website is a huge resource for bicycle design, so be sure to check that out: http://www.peterverdone.com. Adam makes great mountain bikes (sklarbikes.com) which are informed by a lot of riding experience, so I was really grateful for his feedback on my design, as well.
Here is the playlist of the whole Hardtail Mountain Bike Build Series—I'll keep adding to it as we go: youtube.com/watch?v=0okGsgYBObc&list=PLh0BOtXK_s5edhuy-y5C6E41UT-ZLGukE
SUBSCRIBE for more videos on bicycle framebuilding and other shop-related topics: youtube.com/channel/UCBIJI-omNmRdt_4LsF-2PrA?sub_confirmation=1
SHOP MY TOOLS: If you're looking for bicycle framebuilding tools: http://cobraframes.net.
FOLLOW my shop updates on Instagram (@cobraframes): http://instagram.com/cobraframes.


