TheBigMGThe way through the module went only over 8x2 sloped bricks (42918). I got these bricks from a 'pick a brick' wall in a Lego(R) Store. So they need to go in a MOC ;) It runs on the first show in January 2023 without any problems! Instructions: rebrickable.com/mocs/MOC-134142/thebigmg/sloped-lift-gbc/#details
GBC Sloped Lift Lego (R) MOCTheBigMG2022-10-08 | The way through the module went only over 8x2 sloped bricks (42918). I got these bricks from a 'pick a brick' wall in a Lego(R) Store. So they need to go in a MOC ;) It runs on the first show in January 2023 without any problems! Instructions: rebrickable.com/mocs/MOC-134142/thebigmg/sloped-lift-gbc/#details
________________________________________ If you like the video please leave a comment, hit "thumbs up" an consider to subscribe Thank you!Lego ® GBC ⚽🏀 Train with Duplo Train 10874, what happens after 15 minutes 😱, work in progress part 2TheBigMG2023-10-02 | Part 2 of my attempt to build a GBC module from the Lego Duplo train. I was successful with the loading and unloading module. But watch until the end to see what happens when the train travels longer...
If anyone has an idea how to fix my problem, please let me know in the comments. I have tried it via Bluetooth with the PoweredUp App and the BAP but without success.
To be continued!
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Lego ® GBC Pushed by wheels and teeth, MOC with Chebyshev Lambda LinkageTheBigMG2023-09-22 | I found this movement in another YouTube video youtu.be/M1-YeqGynlw?si=EYQtdHe50TQKfZ_B and wanted to build a module using it. A few failed attempts preceded this module. I like the slow straight movement to the side followed by a quick arcing movement back. Strictly speaking, this is not a module, but rather an extension for another suitable module. The Single Seller Stepper youtu.be/vrJsx-jVz_s (by NonsensWars) works well for this. This combination can already be seen on the Maiker Faire Hannover video youtu.be/dPhKxSuQ6Jg and worked continuously for two days. By the way, an old motor is used as the engine. bricklink.com/v2/catalog/catalogitem.page?P=bb0129&C=11#T=C&C=11
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Lego ® GBC Shared Power ⚡ and Sam Friesens Pinwheel ⚽🏀 (and some other modules)TheBigMG2023-09-16 | In this video you can not only see my Sam Friesens ball pump, which you already saw in another video or a pair of twins of NonsensWars Single Seller Stepper. But you will also see my version of Sam Friesens Pinwheel module. And all this modules are driven by only one motor. This saves parts and money 😁 The ball pump and the colorful Single Seller Stepper has been to a show in shared power mode. The two others will be on the next show.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Lego ® GBC Multi Stepper V2 by NonsenseWars ⚽🏀TheBigMG2023-09-09 | This is my version of NonsensWars Multi Stepper V2. I made some small modifications. You can find details about the MODs in the video. The Stepper has already been to a show and was much more reliable then I thought it would be 😉
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Minecraft Ghast as Lego ® GBC module with moving tentacles 😲, MOC on Sam Friesens ball pump ⚽🏀TheBigMG2023-09-03 | I showed my daughter a GBC video of a creeper spitting balls. Not being an expert, I've been taught that a ghast shoots fireballs, but a creeper doesn't do anything like that. So a plan was born. First I designed a ghast head in Studio 2.0 and gradually improved it. Then get the parts you need. But not only a suitable head should be built, the tentacles should also move like in the game. That was much more difficult, since there wasn't actually any space for it in the Ghast. Somehow I managed to realize the movement. To build the Nether I needed a few corrections from my daughter. But I think it's all good now. It's already been to a show and has held up very well. Either way, it's a magnet for kids of all ages...
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Maker Faire 23 - Lego® GBC Layout (Steineland Harz & Heide / Steinhanse) - and suffering modulesTheBigMG2023-08-25 | My GBC layout at the Maker Faire in Hannover 2023 on August 19th and 20th. I had a total of about 35 modules at the show, although not all of them were used because some didn't work the way I would have liked. What can be seen here ran quite reliably. In particular, some new modules have convinced me. A crowd puller was 'The Hammer' and the GBC train.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !
Music: "Shiny Tech" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 4.0 License http://creativecommons.org/licenses/by/4.0Lego ® GBC 🏀⚽ Split Level Stepper MOD with bridge and start/stop switch,a simple solution for gaps 🚧TheBigMG2023-07-16 | This is my modified version of the split level stepper from Nonsens Wars. It's an easy solution to go over gaps between tables. By simply switching it on and off, the bridge can be folded up briefly and you can walk through it. At the last show we bridged a gap of 40 cm, more is possible. I also increased the capacity of the inbox so that there is no backlog here. The conversion should also be manageable without instructions. Have fun! 😁
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Lego ® GBC, Duplo Train 🚂, first ideas (work in progress)TheBigMG2023-06-30 | This is the first video trying to convert the Lego Duplo Train (10874) into a GBC module. It was relatively easy to convert the wagon so that it can hold enough balls. The same applies to the loading module, which is relatively high overall, but can still hold enough balls. The unloading module is built very simply and is only intended to show the principle. In any case, the unloading must take place higher if the balls are not to be transported up again. To be continued ...
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Lego ® GBC Sweeper Brickfair Kit 003, small MOD ⚽🏀TheBigMG2023-06-12 | This is my version of the Brickfair Sweeper as found on this site: brickfair.com/GBC . I made a few small changes. The module seems very reliable and holds significantly more than the specified 30 balls. It hasn't been to a show yet. Have fun watching the video.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !LEGO ® GBC - 4 differents ways to power ⚡ WM01 ⚽🏀TheBigMG2023-06-02 | The workshop module WM01 from Matt Norman is a very reliable GBC module. So far I build 4 of them, but all of them are driven in different ways. Two of them were build by using instructions. The other two were modified by myself. The origianl from Matt Norman can be found here (with instructions): youtube.com/watch?v=dGXOPIgvB9E In his video you will find another way to drive the module in the elephant version. The modified version Montys Splitter can be found here (with instructions): youtube.com/watch?v=HrxHYvBuQAU The one that feeds my GBC train is very similar to the original. But I build it with the motor inside the module and a bit higher. So you can use it next to other modules or even in corners. You can find a video here: youtube.com/watch?v=YsCmd6B_cZg The last one is the one you would not think it is a WM01. The mecanism at the bottom is the same as WM01, but the conveyor is completey different. I managed to use an old motor, Bricklink item: bb0129. You can see a full video here: youtube.com/watch?v=9ydUYcdcUoM
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
If you like this video please leave a comment and 'thumbs up' Thank you !Lego (R) GBC Vertical Gear Rack (with outtakes)TheBigMG2023-05-26 | The mechanics of this module are so fascinating, that I had to build one. It has not been to a show, buts works reliable so far.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
If you like this video please leave a comment and 'thumbs up' Thank you !
PS: Sorry about the quality of the video. Used a different camera and did not set the right resolution :(Lego ® GBC Diagonal in Lime ✅ and Black 🖤 MOC on a 16x16 Plate ⚽🏀TheBigMG2023-05-20 | This module was created because I had a 16x16 plate left over. I have set myself the goal of building a module on exactly these 16x16 studs including the motor. First attempts failed, at least for the time being. I hope later to build more modules on these basic dimensions of 16x16 studs. The principle of this module is well known, although I don't know who originally came up with it. I modified the upward wave to run diagonally, hence the title. Not all balls always reach the goal evenly. But I like this form of movement to the next module.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
If you like this video please leave a comment and 'thumbs up' Thank you !Lego ® GBC Train Track Tower MOC ⚽🏀🚂TheBigMG2023-04-17 | I assembled this Lego(R) GBC MOC from various modules and then implemented my own creativity. The basis of the conveyor is the Great Ball Pit WM01 module ( youtube.com/watch?v=dGXOPIgvB9E ). But the way up is an own creation. I saw the tower similarly, but a bit smaller in a video. Thank you for @BrickEngineeringCom helping me find the video: youtube.com/watch?v=8yAZgWMPpBs&t=458s . I wanted to build the whole module a bit higher and the result was a module that is as tall as it is wide. In contrast to "The Hammer" module ( youtube.com/watch?v=AMpPGr3y-K0 ), the balls move slowly here. This module has not been on any show yet.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !The Hammer 🔨 (MOD) and The Catcher (MOC) Lego ® GBC flying balls 🏀⚽TheBigMG2023-04-04 | Stuart's Catapult impressed me from the start. But the balls just didn't fly far enough for me. So I built a 2nd version in which significantly more weight falls on the catapult. The result is a 60 cm high flight instead of a 10 cm jump. In order to bring the long flight to a reasonable end, however, a new MOC was needed. I called this one 'The Catcher' because that's exactly what it does, it catches the balls. It is still a kind of 'work in progress' and it has not been to a show.
By the way: my version of Stuarts Catapult did a great job on the last show. As far as I know the first idea of this module came from Tom Atkinson. Thank you for sharing.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
If you like this video please leave a comment and 'thumbs up' Thank you !Single Seller Stepper by NonsenseWars, easy Lego GBC funTheBigMG2023-03-28 | A very simple GBC module recently released by NonsenseWars. I particularly liked the concept that more normal parts are used here. Quick to build for anyone who has some Lego pieces at home (it took me 30 minutes to build). Let's hope that some will find their way into this fascinating hobby through modules like this one. It was my intention to use colors that I don't normally use. So this is why it is so colorful...
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
If you like this video please leave a comment and 'thumbs up' Thank you !Lego ® GBC Rocking Platform - MOC 🎸🏀⚽TheBigMG2023-03-07 | This is one of my oldes modules. I have seen some modules on youtube, that worked in a similar way, but I created my own version. It isvery reliable and it has been to three shows yet. I love the slow and sometimes random motion of the balls.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Lego GBC Ball Pump, Version of Sam Friesen, with a little MODTheBigMG2023-03-01 | Here is my version of Sam Friesen Ball Pump. It's a very reliable module. And by the way, it's nice to see that the balls are only held up by 4 bars. I also tried to design the pump a little higher (with more bars). Twice as high is no problem. But I think there is more possible.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Dubai GBC, Balls on a wave with ballpump to feed, MOCTheBigMG2023-02-22 | I got the lego architecture set 21502 Dubai on a blind auction. But an architecture set has nothing to do with GBC. Since Dubai is by the sea, I wanted to build a beach with some waves. At the back the skyline of Dubai and under water a few sea creatures. When that was all finished, a ball supply was needed. I chose a color matching ball pump. The module has already been to a show and mastered it without any problems.
If you like GBC here are some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
If you like this video please leave a comment and 'thumbs up' Thank you !BrickBits part 2 - Steine in Bewegung - Bricks in Motion, Lego ShowTheBigMG2023-02-03 | Some more videos from BrickBits 2023 in Cremlingen 21.&22.1.2023 Because of the subtitle of the show 'Bricks in motion' (Steine in Bewegung) you will find moving Lego like trains, rollercoaster and monorail. And some other MOCs will be seen. I hope you have fun, even when there are no GBC Modules in part 2, well probably a tiny one at the end....
0:00 Intro 0:06 Trains 0:45 Train 9 V System 0:55 Train 4.5V System 1:06 Noppingen 2:09 Rollercoaster 3:28 Winter village 4:19 Deathstars (variations) 5:55 Monorail (variations) 7:19 Star Wars MOC 8:19 Avatar MOC 8:46 Some pcitures of other MOCs 9:43 Stand alone GBC :) ____________________________________________________________
If you like this video please leave a comment and 'thumbs up' Thank you !GBC Layout at BrickBits 21.&22. January 2023 in Cremlingen, 48 modules, 5 builders and a lot of funTheBigMG2023-01-25 | This video shows the GBC Layout at BrickBits 2023 in Cremlingen (Germany) 21. & 22. January 2023. We were 5 builders and had about 48 modules with some spare ones, just in case. We had a great time following hundrets of balls rolling through all this incredible machines. As far as I know there were at least 4 modules that have not been to a show before. I hope you enjoy the video.
Another video with the same layout following one blue ball from Coastropolis Brick-built: youtu.be/icOLa592fLY
If you like GBC here a some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________
If you like this video please leave a comment and 'thumbs up' Thank you !LEGO (R) GBC Rover, MOD in red with Space MinifigureTheBigMG2023-01-20 | This is my version of Lawrie Georges GBC Rover. I found this MOC severall days ago on the homepage of Lawrie George. But unfortunalty it can not be found there or on Rebrickable any more. If anyone is interessted in instructions please let me know. The module itself is an eyecatcher, very simple and reliable. It has to stand close to the next module to keep the balls in the loop. I made some decoration with a classic space man...
________________________________________________________ If you like the video please leave a comment and hit "thumbs up" Thank you!GBC Sloped Lift, free instructions, animation, stop motionTheBigMG2023-01-13 | My MOC Sloped lift now with free instructions for use in any GBC loop. rebrickable.com/mocs/MOC-134142/thebigmg/sloped-lift-gbc/#details Feel free to build and modify your own version.
_____________________________________________________________ "I Got a Stick Arr Bryan Teoh" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 4.0 License http://creativecommons.org/licenses/by/4.0Lego (R) GBC Star Wars (TM) Seesaw, moving Minifigs, Laser swords with light, Idea: Great Ball PitTheBigMG2023-01-06 | The idea for the see-saw (or tipper) came from Great Ball Pit. Originally implemented as a mincraft theme. I had more Star Wars parts so it became a Star Wars theme. At the last show I bought 2 glowing laser swords. So these should also be included. Additionally I bought the Lego Set 75334 and made some modifications. It was nice that there are already two rotating platforms in this set. There are other mini sets included, but unfortunately I don't have a set number.
If you like GBC here a some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules __________________________________________________ If you like the video please leave a comment and hit "thumbs up" Thank you!200 subscribers, Lego (R) animation / stop motionTheBigMG2023-01-01 | Just a fast Lego(R) stop motion animation and a big thank you to all my subsricbers. There are more GBC videos to come...
If you like GBC here a some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ________________________________________________________ If you like the video please leave a comment and hit "thumbs up" Thank you! ________________________________________________________ Music: "Pixelland" Kevin MacLeod (incompetech.com) Licensed under Creative Commons: By Attribution 4.0 License http://creativecommons.org/licenses/by/4.0Lego (R) GBC Ferris Wheel, MOC, work in progress (with frog)TheBigMG2022-12-23 | I always wanted to build a GBC Ferris wheel, but I didn't like the modules that were available to build. They were either too big or too small or didn't even come close to GBC standards. So I developed my own module. The version you see here is still 'work in progress'. But it is already very reliable and will soon go to a show. More details after that show... Edit 3/2023: I had it to a show and it worked fine two days 8 hours each. But I will do some improvements. Video of that later this year. Video of the show: youtube.com/watch?v=InBnLSWe1Mg I took over the stop-and-go drive from Modul 'Cup-Conveyor' so that the balls can easily enter the cabins at the lower end of the Ferris wheel. The axle at minute 3:25, which fixes the wheel for a short moment, is also very important.
If you like GBC here a some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like the video please leave a comment and hit "thumbs up" Thank you!GBC Mini Loop - fun with one or two balls - instructions available (MOC)TheBigMG2022-12-16 | I challenged myself to build a GBC Mini Loop with parts I had. It works everywhere because it needs no electrical power. I also managed to fit this module in a bottle (Lego 21313). There might be a video of that stand alone module later. It is not finished yet. Anyway, this is kind of a fun project with instructions. You can find them here: rebrickable.com/mocs/MOC-126464/thebigmg/simple-gbc
________________________________________ If you like the video please leave a comment, hit "thumbs up" an consider to subscribe Thank you!LEGO (R) GBC Four-Bar by John Sherman (MOD)TheBigMG2022-12-09 | This is my version of John Shermans GBC Four-Bar module. I build the module 10 bricks high. The instructions are for a version a bit higher. And some other bricks are different because of my bricks in stock...
If you like GBC here a some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like the video please leave a comment, hit "thumbs up" an consider to subscribe Thank you!LEGO (R) GBC train, concept by Nonsense Wars, modifiedTheBigMG2022-12-01 | This is my modification of the train from Nonsense Wars. I've always wanted to build a GBC train, but other concepts fail with me. I have seen the original video a hundred times or more to build this version. My modification is as follows: I slow down the train with gear racks fixed close to the tracks. So loading and unloading is much easier and more reliable. I build the train cars lower than the original. So I have to build a higher input module and a lower output module. But this works good. The GCB train has not been to a show. But will go to a show very soon. I hope it will work fine. The only problem is, that some balls get lost at the loading module. But this is less than one per minute.
________________________________________ If you like the video please leave a comment and hit "thumbs up" Thank you!GBC Little Drum by Cyriel van de VenTheBigMG2022-11-20 | Easy to build GBC Module. I build it 2 studs shorter, because I did not have the long 1x15 liftarms for the drum. But it works realy fine with the shorter ones. It can handle a lot of balls very fast.
________________________________________ If you like the video please leave a comment and hit "thumbs up" Thank you!Lego (R) GBC Reservoir Ball Pump, Duck Version in yellow/blueTheBigMG2022-11-13 | This is my version of Rick Fields Duck Ball Pump. I made some minor technical changes. There is a switch at the left side to turn the module of in case of jams. The module can handle more than 100 balls. And there are some more design changes like the color and the head.
________________________________________ If you like the video please leave a comment, hit "thumbs up" an consider to subscribe Thank you!
Typing error: it is a modulE not a modulLego(R) GBC Moving Platform - MOCTheBigMG2022-10-30 | This is one of my first GBC MOCs. Build in winter 2021/22. The goal was to create a more or less random output with conveyor and the moving platform. It is build out of Lego (R) from the 1980s. Only a few newer parts for more reliablity. It has worked well on two shows so far. Sorry, no instruction at the moment. I hope you like it. You can see it on a show here: youtube.com/watch?v=NZmX9N3ZZ2I
If you like GBC here a some links, that might help: greatballcontraption.com - GBC Standard/instructions/FAQ rebrickable.com/search/?q=GBC - find some instructions for GBC modules ____________________________________________________________ If you like this video please leave a comment and 'thumbs up' Thank you !Lego (R) GBC in Ockensen 20.&21.8.2022TheBigMG2022-09-04 | This is our Layout at "Stein trifft Obst" in Ockensen 20.&21.8.2022 in Ockensen (Germany)
Detailed links to some modules in order of appearance:
____________________________________________________________ I run my GBC with this balls: amzn.to/3sEfjFK (affiliate Link)
If you like this video please leave a comment and 'thumbs up' Thank you !Fast IR game with Arduino Nano and remote ControlTheBigMG2018-12-02 | ...Faltbare analoge Märklin Mini Anlage, 2m², 3 Züge, Car SystemTheBigMG2017-10-10 | http://www.modelleisenbahn-analog.de Eine kompkate Märklin Anlage mit dem Ziel viel Fahrbetrieb auf wenig Platz zu realisieren. Die Anlage ist im Betrieb 2x1 m groß und geklappt nur 1x1m und somit gut zu transportieren. Der Film zeigt die ersten BauabschnitteSchattenbahnhofsteuerung von 6 Gleisen (Märklin analog)TheBigMG2014-02-01 | Detiallierte Beschreibung findet sich hier: http://www.modelleisenbahn-analog.de/?p=409
Hier hat Berny meine Schattenbahnhofsteuerung für 6 Gleise nachgebaut. Das kleine Video zeigt das Prinzip der Schaltung.Rasenmähertraktorrennen Thönse 2010TheBigMG2010-08-28 | Das 1. Rennen vom Rasenmähertreckerrennen in Thönse 2010 am Sa. 28.8.2010 Bilder aus der Boxengasse und von der Piste.Harzer Schmalspurbahn (HSB) Triebwagen 187 019-5 und 99 7245-6, Nordhausen, IlfeldTheBigMG2010-08-01 | Harzer Schmalspurbahnen (HSB) im Sommer 2010 (23. Juli). Fahrt mit dem Diesel-Triebwagen 187 019-5 und der Dampflok 99 7245-6 von Nordhausen nach Ilfeld und zurück. (manchmal quiekt mein Sohn etwas im Hintergrund, natürlich vor lauter Begeisterung)
Alles Material ist nicht ohne Erlaubnis kommerziell weiterzuverwenden. Für private Zwecke oder einbetten bitte gerne ... Im Zweifel kurze Anfrage stellen.
Aufgenommen mit Sony HDR-CX115
http://www.modelleisenbahn-analog.deEurobahn Ein- und Ausfahrt Bahnhof Hameln nach BodenburgTheBigMG2009-12-17 | Das passte gerade, dass die beiden Züge gleichzeitig ein- und ausgefahren sind.MEC Fahrtag Siegsdorf / Automuseum Amerang / VT 103TheBigMG2009-09-12 | Modelleisenbahnclub Traunstein Fahrtag am 1. Aug 2009. Fahrt mit dem VT 103 von Bad Endorf nach Amerang und dort Besichtigung des Automuseums und der Modelleisenbahn im KellerRasenmähertraktorrennen in Thönse 2009 Samstag 2. RennenTheBigMG2009-08-23 | http://www.thoense24.de Teile vom Anfang des 2. Rennens am Sa. 22.8.09 in Thoense. Gestartet wurde mit etwa 3 Std Verspätung. Irgendwie cool, aber irgendwie muss man dazu geboren sein ... ;-)Bremsstrecke vor Signalen Märklin H0TheBigMG2008-10-05 | http://www.modelleisenbahn-analog.de Eine rein analoge Lösung für Bremsstrecken vor Signalen, damit der Zug nicht immer so abrupt stehen bleibt. Außerdem Fahrt auf meiner (kurzen) Paradestrecke und im Wendel aus dem Schattenbahnhof. Alles noch rudimentär verkabelt.Wälderbähnle Bezau Schwarzenberg AustriaTheBigMG2008-08-06 | Dampfeisenbahnfahrt von Bezau nach Schwarzenberg und zurück im Sommer 2008. Weitere Infos unter www.waelderbaehnle.at
A trip with WAELDERBAEHNLE in Austria from Bezau to Schwarzenberg.Einfahrt der Dampflok 52 8038 in Rinteln Dez 2006TheBigMG2008-02-05 | Einfahrt der Dampflok 52 8037 der Dampfeisenbahn Weserbergland am Tag der Nikolausfahrt (10.12.2006)MO187 Modelleisenbahn Schau Bad DriburgTheBigMG2008-01-04 | Fotos und Videos von der Modelleisenbahnschau Bad Driburg M0187 (alles mit einer Fotokamera aufgenommen, daher Video nicht so toll, dies ist kein Werbefilm, sondern ein 1/2 Stunden Spaß mit schönen Motiven und die Anlage lohnt wirklich ...)Schattenbahnhof Steuerung Märklin H0TheBigMG2007-12-08 | http://www.modelleisenbahn-analog.de - Eine einfache Steuerung für einen Schattenbahnhof für Märklin, die aber auch auf anderen Systemen funktiniert. Auf meiner Website gibt es einen Schaltplan dazu.
A simple way to manage a automatic staging yard of a model railway. Märklin H0, M-tracks. You will find more on my website (in german only)