Bandsaw Table Upgrade for milling Pen Blanks WYOMINGWOODTURNER 2013-06-25 | Sam shows a band saw table with an improvement. Set in the table is a slot for a crosscut guide which provides for safe milling of pen blanks and other small pieces of wood.
My Struggle Turning a Cottonwood Burl Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-10-06 | Sam has the opportunity to purchase a large Cottonwood Burl. The first challenge is what to turn from this massive burl-next, how to cut it up-and finally how to deal with some nasty bark inclusions......stay tuned for the answers.Visit my new YouTube channel and check out the videos-please subscribe to....learn2turnwithsam youtube.com/@samangeloturnsThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turn a Set.....OF TUBES!!! Four Ways Project for October 1st, 2024 Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-10-01 | Time for another "Four Ways to Turn Something" collaboration.... the project this month was selected by me (Sam)-it was simply to Turn a Set. And Sam has decided to turn a set of tubes. Turning a tube is a cross grain project: it is a very interesting technique and approach to turning something on the Lathe, keep in mind it is not a Spindle turning, as the grain runs perpendicular to the bed ways. Click on the links below to watch the other Turner's videos and please subscribe to watch future "Four Ways to Turn" videos. Richard Rafan youtu.be/p2QuSwTZqfcMike Peace youtu.be/1zr9JEP7hh4 Tomislav Tomasic youtu.be/4nDlZ1c-sTw?si=dt6DSZhqOS2CE-ysSee chapter time codes below: Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s Chapter time codes-click on the time and jump to the desired topic-00:00 Introduction01:46 Milling the blanks with a chainsaw03:47 Cutting the blanks on the bandsaw05:55 Begin turning on the lathe09:02 Turning the blanks round13:28 Drilling the blanks 17:19 Drilling with a Forstner bit 23:25 Establish the wall thickness26:04 Explaining the surface embellishment 27:44 Working with metal reactive paint32:27 Tubes painted and reacting to the paint34:19 Conclusion
Turn a Beautiful Osage Orange Bowl Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-09-22 | Sam turns a beautiful bowl from Osage Orange. He adds a bead detail on the rim...... Please enjoy this video-subscribe leave a comment and share. Thank you. Also tune in to my new channel learn2turnwithsam for more weekly videos from sam angelo. youtube.com/@UCog9HAb1dcxhdd-ZObBJlsw Please contact me with any questions at Samandcheryle@gmail.comThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning Scrap Wood into Cash $$$$$ Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-09-15 | In this video, Sam turns a piece of scrap maple cut off from a bowl blank. He turns it into an item that would sell easily. Watch as he transforms a bit of "throwaway" wood to a little work of art. For more information on using metal reactive paint, please Watch the videos below from Sam's video library on Wyomingwoodturner. More Videos covering metal reactive paint: youtube.com/watch?v=GBNDHI4X0Do&t=7sv=bvXJJGaVIZEyoutube.com/watch?v=egtKMdYxOMY&t=204sHere is another one of my videos on how embellishing a piece affects price:youtube.com/watch?v=xPEUZ_YCtQ8&t=15sHere is a source for the paint: sandraevertson.com/paintsThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Finial and Threaded Lid for my Hollow Form Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-09-08 | In this video, Sam turns a finial made from Partridge wood along with a threaded insert for a hollow form he made in a previous video. See the link to that video below. He goes step by step through the process of turning a finial along with chasing threads for the insert in the top of the hollow form.: lots of good information in this video-don't forget to subscribe and share my videos. Thanks Sam My "Other Channel" ....learn2turnwithsam Please Subscribe!!! link youtube.com/@UCog9HAb1dcxhdd-ZObBJlsw Thread chasing videos on Wyomingwoodturner....youtube.com/@WYOMINGWOODTURNER/search?query=thread%20chasing%20 Thread chasing Playlist: youtube.com/watch?v=2ifi-7DQ5kU&list=PLL5-IWEcq6B9UA1YSW19pZGTanviEKNTy&pp=gAQBiAQBVideo Link Embellished Hollow form: Colored from the inside. youtu.be/-IN-Y_ALxpA Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sChapter time codes: click on the time and jump to the desired topic listed.00:00 Introduction01:03 The video explained02:27 Measuring for the insert03:38 Turning on the lid and insert06:04 Thread chasing female threads on the insert09:34 Begin turning the finial11:24 Getting ready to chase external threads 13:29 Chasing threads15:01 Matching the insert to the Male thread17:20 Turning the finial18:59 Fine tuning the finial21:05 Work on the top of the finial21:51 The completed finial22:42 Sanding and finishing and conclusion
Turn a Garlic Keeper: September Four Ways Project Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-09-01 | This is the Four ways to turn something project for September 2024....... Tomislav, Mike, Richard, and myself are all turning a garlic keeper. Please find the links below to all videos-watch and subscribe thank you very much. TimeCodes Below for your favorite Topic: Links to the Other 3 Videos.....Richard Raffan youtu.be/Z1oxMxfjheAMike Peace youtu.be/Uh551H3w_18Tomislav Tomasic youtu.be/gZ5hN_H9tLQ?si=iDJ1bPKumt0MtrYcChapter TimeCodes Just click on the time to jump to the topic.......00:00 Introduction00:57 The Project Explained 03:38 Begin to Turn the Lid 05:02 Off center set up 06:19 Turn lid off center 10:14 The lid reversed 12:42 Turn the top of the lid 14:51 Lid "Lattice detail" completed 18:23 Chuck up the base 20:00 Shape the base 21:28 The Lid with the base 23:20 Turning Holly detail 25:06 Lid detail continued 26:01 Hollow the Lid 27:44 The lid "Handle" 29:30 Finish the Handle 30:24 The Hollowing continued 31:22 Drilling holes 32:20 ConclusionAre you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Mini Hollow Form-Tools and Techniques with Sam Angelo WYOMINGWOODTURNER 2024-08-25 | Hollowing is perhaps an advanced skill in woodturning and can be quite difficult. However, turning a miniature hollow form is a true delight....In this video Sam showcases small turning tools designed by Laurent Niclot of Fort Collins, Co. He demonstrates how these mini Hollowing tools can be a great addition to your shop. (Link to these tools and video below). Niclot Mini Hollowers: trentboschtools.com/product-category/niclot-mini-hollowersChapter time codes below and in the video Video by Laurent on his tools: youtube.com/watch?v=r7N5mHKhFPY Thanks for watching my videos- Sam Also visit my other YouTube channel learn2turnwithsam and please subscribeAre you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sChapter time codes: just click on the time and jump to the topic listed. 00:00 Introduction 01:00 The project explained 02:11 Chucking up the blank on the lathe03:02 True up the blank 03:48 Create a Mortis and Tenon glue joint04:37 Glue the joint together05:50 Begin to shape the outside of the hollow form08:23 Drill for depth09:24 Introduce the mini Hollowing tools10:46 Begin to hollow the vessel14:18 Wormholes on the surface 15:45 Hollowing continues 19:51 Adding an insert 21:28 Finishing the hollow form23:08 Conclusion And thank you for watching
Turning a Winged Walnut Bowl from Crotch Wood..... Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-08-22 | In this video, Sam turns 1/2 of a beautiful piece of walnut log that comes from a crotch. This area will always produce some interesting and spectacular grain and figure. Don't forget to watch the Sister video to this one where Sam turns the other half of this log-you can find it later on: please subscribe so you don't miss it at.... learn2turnwithsam. Here is a link to that video...... youtube.com/watch?v=Q2zWu7Sc9dk&t=47sThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
2 Big Shop Improvements Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-08-13 | In this video Sam adds two improvements to his shop. The first is a dust collection hood for his sliding miter saw. Next he discovers a threaded device to hang his faceplates and screw chucks on. Watch the video to see these cool additions to his shop. These improvements will work well in your Wood Turning shop or Woodworking shop. Thanks and please share....Scroll Chuck Holder-Link tinyurl.com/23egqtnlDust Hood-Linkamazon.com/dp/B0C551H6PB/ref=pe_386300_442618370_TE_dp_i1Cam Vac Dust extractor Link youtube.com/watch?v=6d66sQL38uI&t=48sThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning Something with a Wheel-August 1, 2024-Four Ways to Turn Project Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-08-01 | The challenge for August 1st 2024 was to turn something with a wheel. I selected a race car with a spare tire. Watch as I a turn this really cool vehicle from a beautiful piece of Bubinga. In the video, I cover: Turning the car body, the wheels, and also the driver-thanks for watching and please subscribe to my channel and also subscribe to Richard, Tomislav, and Mike's channels for More four-way to turn something Videos. Please subscribe and check out the links to Mike's, Richards, and Tomislav's videos. Links below.:Mike Peace---- youtu.be/XNs3azF-eN4 Richard Raffan •youtube.com/watch?v=Woo-YKHkEds&authuser=0Tomislav Tomisec youtu.be/6bQwIYuskuQ?si=26IPCOJiK8jDpEoiThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
A Closer Look at the Tru Arc Tool Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-07-21 | Sam looks at the Tru Arc tool produced by Robust Tools LLC. He unboxes this very interesting device and shows the components available and how each is used. This is definitely not a roughing tool, but one designed with the result of a perfectly curved surface and one that is very difficult to produce by using conventional hand tools. "Tru-Arc is a captive turning system that lets you cut clean and consistent lines on the insides of shallow bowls and platters." Brent EnglishBelow are links to the video published by Brent English of robust tools,As well as a short version of this video published on my YouTube channel learn2turnwithsam. (Shorter Version) youtu.be/G9M_Ua5DdjEVideo Produced by Brent English:youtube.com/watch?v=O0TL44tJvO4Thanks for watching my videos- Please share, subscribe, and leave a comment.Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Turning a Small Bowl From a Cherry Log Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-07-14 | In this short video, sam shows the High Points of Turning a bowl from an oddly shaped piece of cherry wood. Please see the link below for another video published today on my learn2turnwithsam channel.This video is out on my learn2turnwithsam channel-click the link below to watch this really cool video featuring my wife. Rough Turned Wooden Bowl-Turned by Cheryle Angelo (Woodturning with Sam Angelo) youtu.be/CSTxZe4MDFg Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Spin Top and Launcher with a new Design Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-07-07 | In this video, Sam creates a unique spin top that shows off a new design. Watch as he turns this cast acrylic blank into a work of art that also spins very fast. He will take you step-by-step through the process of making this unique spinning top. Make sure to watch and subscribe to my new channel learn2turnwithsam for weekly videos on many Wood Turning topics. youtube.com/@samangeloturnsThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sChapter time codes: click on the time and jump to the desired topic00:00 Introduction00:50 The project explained01:45 How this spin top works02:56 It all starts with a prototype03:42 Cast acrylic04:33 Starting to turn at the Lathe05:23 Drilling the center hole06:47 Attaching a brass rod07:46 Beginning to shape the top08:32 Gluing in the brass rod09:25 More Turning11:16 The top reversed12:07 Shaping continues12:49 Scraping the outside15:31 Sanding the surface18:15 Turning the launcher19:05 Drilling the launcher20:21 Watch Spinning tops21:05 Conclusion
Disk-shaped Bud Vase Turned four Ways July 1st 2024 with Sam Angelo WYOMINGWOODTURNER 2024-07-01 | The four ways to Turn something project continues this month (July 1st 2024) with a disc-shaped bud vase. This idea belongs to Mike Peace. Watch as I turn my Bud vase with a bit of a twist. My Bud base is turned from Bradford Pear and on either side I add colored and textured inserts. Lots of cool ideas in this video thanks very much for watching and please subscribe and share my videos Sam See chapter time codes below...... Just click on the time and jump to the desired topic. Here are links to the other three members of the four ways to turn project-Please watch us all and subscribe for future videos Tomislav Tomasicyoutu.be/KTBDZotzZv0?si=B3bvXt8CwNGhbjt7Richard Raffan youtu.be/g_U7gljqc9UMike Peace youtu.be/4XwWCUTTM8cThanks for watching my videos- for more of my videos, watch and subscribe to my new YouTube channel learn2turnwithsam Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comChapter time codes: click on the time and jump to the topic listed.00:00 Introduction00:19 The project explained 01:27 Milling at the band saw 02:53 Work at the drill press 09:22 Establish a recess for the insert 10:31 Shaping the outside of the bud base12:21 Hollowing 13:29 Insert the glass tube16:02 More churning on the insert20:07 Decorating the insert with Beads21:55 Texturing22:25 Coloring the insert24:07 A flask turned in a similar manner 24:48 Final shaping on the outside25:58 Sanding and finishing27:23 Forming a foot27:48 Conclusion Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Will I stop Making YT Videos? Or Keep Going? with Sam Angelo WYOMINGWOODTURNER 2024-06-23 | Sam brings back Notes from the Turning shop-one last time-and discusses his future on YouTube. For Sam this is a complicated issue and a difficult decision. Watch and find out a little bit more about the future of Wyomingwoodturner and his new channel learn2turnwithsam.For new, weekly videos Please subscribe to LEARN2TURNWITHSAM @ youtube.com/@samangeloturns No matter what happens, I will continue to publish my monthly Four ways to turn something project on this YouTube channel. Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
After 850 Videos....IS IT TIME TIME QUIT? Sam Angelo WYOMINGWOODTURNER 2024-06-16 | Sam ponders his future as a YouTuber. With growing challenges from "Artificial Intelligence," increasing competition on YouTube, and dwindling views, he must make a decision to continue or simply quit making videos. Watch this video and find out what Sam decides to do. Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Spin top with launcher WYOMINGWOODTURNER 2024-06-16 | . This top was made from Partridge wood and a brass rod
Must See!!! Turning Bowls for Charity Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-06-09 | In this video, Sam completes some bowls that had been previously rough-turned and partially finished. He continues and completes the bowls, adding some texture and coloring. These bowls have been turned for a local charity event in Billings, Montana. There is a sister video showing how Sam sands these bowls on the drill press........ Here is a link to that video: youtu.be/wOZPS4e1eMoThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
My Favorite Woodturning Project: Four Ways for June 1st with Sam Angelo WYOMINGWOODTURNER 2024-06-01 | Four ways to turn video.....For the June 1st "Four Ways" video, Sam has selected the topic---- which is, to Turn our Favorite piece. Sam's favorite piece would be a lidded box or container. Watch as Tomislav, Richard, and Mike select and turn what they consider to be their favorite project for the lathe. The links for all the videos are directly below: please enjoy them thanks. Watch as my fellow Woodturners in the four ways to turn group turn their favorite item. See the links directly below.Tomislav Tomašić youtu.be/Xp6yrPT2kPA?si=GiFzsDf-3MwwE9yaRichard Raffan youtu.be/h9rhcf9uHy0 Mike Peace youtu.be/6zUwqRzRQ6cTime Codes Below: Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sChapter time codes: click on the time and jump to the desired topic00:00 Introduction to the video01:33 The Project explained 03:22 Wood selection 04:45 Attaching the wood to a scroll chuck07:06 Laying out the box blank09:19 Setting the dimensions for the box 10:00 Parting off 12:10 Finishing the bottom of the base15:07 Adding shape to the box18:07 Hollow the lid 23:07 Sand and finish the inside of the lid 24:34 Chasing threads on the lid29:07 Close-up of threads on the lid 30:38 Preparing to chase threads on the base 33:03 Thread chasing on the male tenon35:48 Making the connection37:33 Lining up to the grain40:22 Conclusion, and thanks for watching
How I TURNED this Monster: A 300 Lb. Walnut Table Pedestal Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-05-26 | Memorial day sale on (Robust Lathe) see details below... Sale ends May 31, 2024. Watch as Sam pushes the limits of his American Beauty Lathe. He could only estimate the weight of the block of walnut which was laminated together with 2" thick boards-at 300 Lb. A must see video......The finished pedestal weighed in at 80 pounds. Which means Sam removed over 200 lbs of wood.See chapter time codes below for specific topics during the video!!!!! Memorial day (Robust Lathe) sale !!!!!! $500 off on any (Robust Lathe) and a free motor upgrade until May 31. Contact me if you have any interest in the best American made Lathe.SAMANDCHERYLE@GMAIL.COM Please visit my other YouTube channel LEARN2TURNWITHSAM and subscribe. Link--youtube.com/@UCog9HAb1dcxhdd-ZObBJlsw youtube.com/@samangeloturns Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am an authorized Robust lathe dealer. Please contact me if you have any questions.Chapter time code: click on the time and jump to the desired topic. 00:00 Introduction to this video00:52 The project explained01:48 Mounting the block of wood onto the lathe02:44 Making the project blank round 05:19 The block of Walnut rounded over07:23 Begin turning 08:15 Laying out the pedestal10:51 Beginning to shape the pedestal11:32 Some dimensions marked on the wood13:35 Wood removal14:23 Laying out more dimensions17:26 Some finer details turned20:07 My story stick with layout points21:21 Find tuning the shape23:09 Work on the base 23:36 Final photos and conclusion
Lathe sale WYOMINGWOODTURNER 2024-05-25 | Contact me if you have any questions. SAMANDCHERYLE@gmail.com.
Robust Tools SPINDLE ROUGHING GOUGE Review Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-05-19 | Sam takes a close-up look at the spindle roughing gouge manufactured by Robust Tools in Barneveld, Wisconsin. The way this tool is designed makes it one of the safest spindle roughing gouges on the market. It is an exceptional tool that will be the only spindle roughing gouge you need in your kit. Please enjoy the video and subscribe. Thank you, Sam.Let me know if you have any questions. Contact me at. samandcheryle@gmail.com Also, Watch my new channel LEARN2TURNWITHSAM and please subscribe thank you LINK- youtube.com/@UCog9HAb1dcxhdd-ZObBJlsw There is a list of time codes. Please click on the time and jump to the desired topic.. 00:00 Introduction to the video00:37 Sam shows off the spindle roughing gouge 01:29 Unboxing the tool 02:12 Comparing two spindle roughing gouges02:56 Tool geometry 03:44 The Collett system explained05:34 Tool storage 07:01 Turning with the spindle roughing gouge 07:32 Sharpening the tool 09:00 The grind and cutting edge explained 09:49 A little more turning11:02 Conclusion And thank you for watchingThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am an authorized Robust lathe dealer. Please contact me if you have any questions. I also sell gouges, scrapers, and other accessories made by Robust tools, let me know if you're interested and I can drop ship any item directly to you. Thank you. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Mastering Gouges: Woodturning Tools With Sam Angelo WYOMINGWOODTURNER 2024-05-12 | In this video, I will cover the spindle gouge and the bowl gouge and how each is used in wood turning. Grain direction has a lot to do with this lesson. A spindle gouge is generally used on wood with grain running parallel with the bed ways. When using a bowl gouge the grain runs perpendicular to the bed of the lathe. Also, Sam spends time explaining when the spindle roughing gouge is used and a warning to be careful with this tool. Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.com Send me a comment or question via e-mail: @---- samandcheryle@gmail.com Chapter TimeCodes: Click on the Time and Jump to that topic 00:00 Introduction to gouges01:06 A closer look at tools03:03 When to use a bowl gouge and when to use a spindle gouge04:00 The Importance of Grain direction05:06 Robust Collett handle explained07:09 Turning with a bowl gouge09:43 Proper presentation of a gouge11:55 Scraping on the outside of a bowl13:41 Forming a bead15:41 Spindle roughing gouge18:35 Spindle gouge19:24 Forming beads and coves23:56 Conclusion I am an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
How I Turned a Winged Bowl (and survived) Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-05-05 | In this video, I show how I turned a winged bowl from a section of log.Be careful turning such a bowl as it can be dangerous. Sam takes you step-by-step in the process of safely turning such a project. Please subscribe and leave a comment and visit my new Woodturning channel., learn2turnwithsam youtube.com/@UCog9HAb1dcxhdd-ZObBJlsw If you like my channel and wish to support what I do, please buy me a cup-link below:BUYMEACUP LINKbuymeacoffee.com/SamAngeloAlso, please subscribe to my other YouTube channel: LEARN2TURNWITHSAM Thanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com Chapter time codes: please click on the time and jump to the Desired topic 00:00 Introduction00:38 Milling at the bandsaw01:25 Attaching the blank with a screw Chuck 01:47 Turning begins at the lathe 02:38 Establish a compression tenon 03:53 Turning the underside of the bowl 04:36 Reverse chucking 05:23 Attaching the bowl blank to the chuck 06:15 Turning the inside of the bowl 07:54 Scraping 08:20 Rim detail 10:08 Scraping on the inside of the bowl 11:08 A little sanding 11:52 Applying a finish 12:40 Final re-chucking 14:13 Applying a finish to the underside of the bowl14:32 ConclusionI am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
How I Turned an Octagonal bowl. FOUR WAYS PROJECT May 1st 2024 Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-05-01 | May 1 Four Ways to Turn Project-2024In this installment of the four ways to turn project, Sam turns an octagonal bowl-- much of the work is done off the lathe with a router. This might be considered more of a woodworking project but contains some interesting elements for joining wood turning and woodworking ideas.Find the chapter time codes below: Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease watch the other three videos by clicking the links below:Tomislav Tomasic youtu.be/9kBgfkq-qr0?si=hxSFcjMB3PvUNwO8Mike Peace youtu.be/XYmNnSyZIr4 Richard Raffan youtu.be/SZly20R8rdk Please subscribe to my new channel: learn2turnwithsamyoutube.com/channel/UCog9HAb1dcxhdd-ZObBJlswThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sJust click on the time and jump to the desired topicChapter time Codes: 00:00 Introduction00:48 The Project explained02:07 Designing the Octagon03:12 Cutting the corners square04:12 Turning at the lathe05:47 Forming the expansion recess07:05 Shaping the bottom of the piece09:03 More on design12:04 Setting up for the router 13:32 Routing the project 16:49 Back to the Lathe 18:47 Turning the bowl 21:42 sanding 22:54 Conclusion
Finishing on the Lathe with Acks Paste Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-04-28 | In this video, I review three items offered by Tom Ackley. His new product which contains tongue oil is an excellent first step in the finishing process. To continue finishing a project, use abrasive paste followed by his restoring wax. I will take you step-by-step through the finishing process and how to apply each of these fine products. For ordering information see tom's website link below. Also, please find my new channel learn2turnwithsam and watch my videos for beginning wood, Turners and please subscribe, thank. ack15: use this promo code to receive a 15% discount Tom Ackley's website:ackswoodpaste.com Shop for Tom's products:ackswoodpaste.com/shopThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.
Creating An Elegant Calabash Bowl From Box Elder Burl Wood With Woodturning Master Sam Angelo WYOMINGWOODTURNER 2024-04-21 | Sam transforms a piece of box elder burl into a lovely and simple calabash bowl. Watch as he takes you through the steps for turning this bowl.Thanks for watching my videos- please subscribe and also watch my new channel. Learn2turnwithSam. And share with any new or beginning wood, Turners.Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sChapter time codes-just click on the time and jump to the desired topic 00:00 Introduction and welcome00:42 Attaching the bowl blank to the latthe01:22 Chucking with a screw chuck01:56 True Up the underside of the bowl02:47 Truing up the side of the bowl 04:15 Forming a tenon 05:38 Forming the shape of the bowl06:48 Shear scraping with a gouge 09:04 Refining the surface with a spear point scraper 11:41 Just a little sanding on the outside12:30 Applying a finish13:30 Reverse chucking13:59 Drilling a hole for depth15:14 Hollowing the inside of the bowl17:24 Using a bowl gouge on the inside19:31 Scraping the inside of the bowl21:35 Finish the inside of the bowl and conclusion
Watch As Sam Angelo Turns A Monster Round Cutting Board With A Groove! Woodturning with Sam Angelo WYOMINGWOODTURNER 2024-04-14 | In this video, Sam turns a 17 inch round cutting board with a groove. Watch as he shows some very unique chucking techniques to accomplish this project. The wood is beautiful Brazilian cherry: Jatoba. Thanks for watching and please subscribe. Also, my new channel LEARN2TURNWITHSAM is up and running. It includes lots of good information for new wood Turners or those who are teaching Woodturning. Link to my new channel--- youtube.com/channel/UCog9HAb1dcxhdd-ZObBJlsw Chapter time codes at the bottom of this description: Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sChapter time codes00:00 Introduction to the video 01:05 Explanation of design 01:54 Cutting at the chopsaw 02:58 Milling at the bandsaw 03:57 Tips on gluing wood together06:09 Proper wood orientation for glue 07:26 Gluing the wood together 08:57 Chucking the blank onto a waist block11:54 Securing the blank with a large scroll Chuck13:22 Initial turning and flattening the breadboard17:02 Flattening the breadboard with a scraper19:28 Creating an expansion recess23:49 The bottom of the bread board completed26:14 Reverse chucking onto a scroll check29:54 Begin work on the top of the bread board31:39 Sanding, yuck32:25 Applying an oil finish 33:24 Turning the groove 34:15 Conclusion and thank you very much for watching
Turning Wood Into Metal The Art of Embellishing Wood with Sam Angelo WYOMINGWOODTURNER 2024-04-07 | In this video, Sam starts with a block of maple-he turns it into a pot shape, and then proceeds to texture the outside of the piece. He paints the surface black..... the next step is to add silver gilt cream that changes the appearance of the wood and makes it look like metal. Inspired by Nick Agar ...... Chapter time codes are available at the bottom of this description. Just click on the time and jump to the desired topic. please subscribe to this channel: WyomingWoodTurner, and to my new channel ---- learn2turnwithsam. Sale,Sale,Sale.......Robust Lathes $500 OFF any lathe plus a free Motor upgrade.Looking for the finest American made lathe? Contact me for details on one of the fine Robust lathes available. This sale ends April 15. Robust lathe sale, don't miss out. Contact me today for more details and information.:email samandcheryle@gmail.com 1-307-431-5395 or CallIn addition, I have one American Beauty lathe... loaded... in the stock lathe program, which means it's ready to ship-no need to wait eight or 10 weeks for delivery. Please find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sChapter time codes. click on the time and jump to the topic listed. 00:00 Robust lathe sale00:32 Wood selection01:28 Attaching project with a face plate02:34 True up the blank 06:25 Forming a tenon 09:34 Reversing the bowl blank11:13 Developing the outside shape14:51 Fine-tuning the shape15:47 Shaping the rim17:45 Texturing the outside of the bowl21:48 More texturing23:54 Adding imprints with various tools26:26 Final texturing29:16 Inside Hollowing 30:07 Adding gilt cream31:50 Conclusion and thank you for watching
Learn to Turn an Ancient Fantastical Goblet-Four Ways Project April 1, 2024 with Sam Angelo WYOMINGWOODTURNER 2024-04-01 | April 1, 2024: it is time for another four ways to turn video. See all the links below for Tomi, Mike, and Richard as we all turn a goblet. My goblet is ancient and fantastical., it is magical and mysterious. I used a variety of techniques to embellish my goblet, which include ebonizing, applying metal reactive paint, as well as gilding. DON'T ORGET THE Robust Lathe Sale-- email me for details.... samandcheryle@gmail.com Sale ends April 15 2024 There is a lot going on in this video and a lot to learn, as I make my own version of the goblet. This would be a great gift for a kid or an adult who hasn't grown up yet. Watch my fellow turners make a goblet.....Tomislav Tomasic youtu.be/Rbb3PKY0Fng?si=snMgqLMRbzQRGn_XMike Peace youtu.be/VYtJg57qnlgRichard Raffan youtu.be/XPiyDSqt7moPlease subscribe to my new channel, learn2turnwithsam youtube.com/channel/UCog9HAb1dcxhdd-ZObBJlsw If you enjoyed this video, and my YouTube channel-show your support by buying me a cup.Buy Me a Coffee if you like this video.... buymeacoffee.com/SamAngeloAre you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comAffiliate link to the Woodturning StoreIf you are interested in a CamVac or other fine products found on the Woodturning store site, Click on my affiliate link in the description below. I will get a small commission for anything you purchase thewoodturningstore.com/?aff=8 CamVac thewoodturningstore.com/search.php?search_query=camvac+?aff=8Woodturning tools (general)thewoodturningstore.com/woodturning-tools aff=8Thanks for watching my videos- TimeCode/Chapters Just Click on the time and jump to that place in the video00:00 Introduction turning a goblet00:49 Selecting the wood01:22 Milling at the bandsaw05:04 Drilling and expansion recess05:43 Chucking up the cup06:36 Turning the base at the lathe 08:32 Turning the cup 11:59 Turning, the Spindle13:41 How to ebonize 19:09 More work on the cup of the goblet22:47 Fill a bark conclusion26:34 Turquoise inlay 28:49 Gilding the rim 30:45 More work on the base and Spindle33:39 Detail work with a gouge36:47 Ebonizing 38:58 Metal reactive paint on the cup43:08 Spraying the active solution45:48 More work on the rim/ gilding 48:04 More gilding and conclusionAre you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
Step-by-step Guide To turning A Lidded Wooden Container: Woodturning Tutorial With Sam Angelo WYOMINGWOODTURNER 2024-03-30 | In this video, Sam turns a beautiful lidded box from a lovely piece of mesquite burl. Watch as he takes you step-by-step through the process.To easily navigate this video check out the chapter Time codes below..Robust lathe sale!!!! Sale! Sale! Sale! Robust tools has announced a sale on the finest American made lathe available. They are offering $500 off any Robust Lathe. In addition, you will get a free motor upgrade: valued at $300. And if you pay with a check, you will get an additional 3% off. I AM A ROBUST DEALER-Please contact me for details and I will answer any of your questions. My contact information is.: cell 1-307-431-5395 samandcheryle@emailcom Please check out my new YouTube channel learn2turnwithsam @ youtube.com/@samangeloturnsThis channel is designed for the new wood Turner or perhaps for teachers, who are dealing with new students interested in turning safely at the lathe. Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341s Chapter Time Codes just click on the time and jump to the desired topic.00:00 Introduction Robust Lathe Sale 00:36 Project explained01:14 Turning begins03:16 Forming a tenon04:25 Parting off06:46 Hollowing the lid 09:53 Sanding11:49 Applying a finish16:36 Jam chuck and work on the lid 18:04 Complete the lid20:59 Applying a finish to the lid22:23 Drilling out the base24:03 Sanding the inside of the base24:53 Applying a finish to the inside of the base25:55 Final fitting for the lid26:42 Reverse-jam-Chuck the base28:32 Finishing the base31:05 Conclusion
Mastering The Point Tool: A Woodturning Tutorial With Sam Angelo WYOMINGWOODTURNER 2024-03-24 | My point Tool videos go back to 2012.....It is time to remake this video and demonstrate this important tool once again. As shown in all the videos below, the point tool can be used for many woodturning operations: it CAN be easily made and sharpened as well. (see my video links below for the point tool). You can find chapter time codes for this video BELOW IN the description Please open the link below to my new YouTube channel for beginning wood turners (or anyone) SUBSCRIBE-SHARE-AND LEAVE A COMMENT. youtube.com/@samangeloturnsI am an Authorized ROBUST lathe dealer: contact me with any questions samandcheryle@gmail.com Buy Me a Coffee...link buymeacoffee.com/SamAngeloMy affiliate links for the Wood Turning store, which includes the cam vac and other Wood Turning tools. Click on my affiliate link below. I will get a small commission for anything you purchase thewoodturningstore.com/power-tools/camvacs/?aff=8 Woodturning Store Home Page thewoodturningstore.com/?aff=8Woodturning tools (general) thewoodturningstore.com/woodturning-tools/?aff=8BUYMEACUP LINKbuymeacoffee.com/SamAngelo Other Point Tool Videos-WyomingwoodturnerMaking a point toolyoutube.com/watch?v=LRw6rBnyh08Sharpening a point toolyoutube.com/watch?v=g_NLNGxuMO8Thread, chasing in the point, Toolyoutube.com/watch?v=E4ATeMqpIP4&t=161sTurning a handle for a point toolyoutube.com/watch?v=0uGsNgetK5k&t=798sThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26sChapter time codes. 00:00 Introduction 00:55 The point Tool explained02:13 Point tool geometry03:07 Point tool close-up03:57 How to use the point tool 05:00 Forming detail with a point tool06:31 Shaping a spigot with the point tool 08:31 Planing the surface with a skew chisel12:29 Turning Beads with the point, Tool14:52 Sharpening the point tool 17:24 Using the point tool in end grain18:38 Forming beads in end grain 19:04 Conclusion
Mastering Woodworking-Incorporating the CamVav dust extractor in my Woodworking Shop -Sam Angelo WYOMINGWOODTURNER 2024-03-17 | In this video, I will show you specifically how I hook my desk collection system up to various tools and machines in my shop. I will give you a detailed description of how I connect my bandsaw, chopsaw, track saw, and floor sweep accessory to my CamVac system.See chapter time codes below-click on the time and jump to that topic in the videoClick on this link for my unboxing video for my cam vac youtube.com/watch?v=6d66sQL38uI&list=PLL5-IWEcq6B9T-gm_2bVggae6D4YWrbDM&pp=gAQBiAQBPlease subscribe,, and leave a comment on my videos. Thanks, SamBUYMEACUP LINK if you enjoyed this video, you might consider buying me a cup buymeacoffee.com/SamAngeloThanks for watching my videos- Are you Looking at the American Beauty wood lathe? I have one in the "Stock Lathe" program, READY TO SHIP, contact me for details-At samandcheryle@gmail.comAffiliate link to the Woodturning Store (for all your Woodworking and Wood Turning needs)If you are interested in a CamVac or other fine products found on the Woodturning store site, Click on my affiliate link in the description below. I will get a small commission for anything you purchase The Wood Turning Store.. and CamVac Linksthewoodturningstore.com/search.php?search_query=camvac/?aff=8thewoodturningstore.com/power-tools/camvacs/?aff=8 Woodturning Store Home Page thewoodturningstore.com/?aff=8 Woodturning tools (general) thewoodturningstore.com/woodturning-tools/?aff=8BUYMEACUP LINKbuymeacoffee.com/SamAngeloChapter time codes-just click on the time and jump to that topic00:00 Introduction00:33 My shop layout01:07 Details on the cam VAC02:45 The floor sweep 03:40 Layout of the dust extraction network 04:27 Band Saw connections 05:41 Floor sweep accessories07:30 Dust collection at my Lathe08:53 Using my track saw10:13 More on the floor sweep11:37 Sanding at the drill press13:54 CamVac on wheels14:46 Drilling with a Forstner bit 17:32 At the bandsaw/ cleaning up 20:23 Picking up Shavings while I turn21:14 Conclusion thanks for watchingPlease find my work on the following sites http://www.wyomingwoodturner.com ETSY etsy.com/shop/wyomingwoodturnercom Send me a comment or question via e-mail: @---- samandcheryle@gmail.com I am now an authorized Robust lathe dealer. Please contact me if you have any questions. Interested in a Robust Lathe-watch my videos below on these fine, American made machines.The Robust American Beauty Lathe: A Closer Lookyoutube.com/watch?v=gNZMbKB7c4I&t=341sFor more information on the Robust Sweet 16 wood lathe, watch my video: Sweet 16 lathe tour tinyurl.com/uylxh72 Scout Lathe Tour…Video from Sam Angelo youtube.com/watch?v=njFVFimn7bI&t=26s
