THE FLYING CHAINSAW! 8ft foamy airplane Samm Sheperd (SNRS) 2015-01-18 | Specs as I think I know them: Ohlsson & Rice Compact III 1hp engine1967+1.34 CID = 21cc1hp @ 6300RPMI used a 16x8 wood prop.Link to Flight Footage:youtube.com/watch?v=rwp-hrWonMg&feature=youtu.beLink to My Hotwire Video:youtube.com/watch?v=yIxyyTnT-hM&list=UUcIbMAd5E6cOaJRuIliW9LwLink to working chainsaw footage: (CAUTION LOUD)youtube.com/watch?v=okCgcamRpcMLink to Diaphragm on Ebay:http://www.ebay.com/itm/OHLSSON-amp-RICE-O-amp-R-Compact-Engine-Carburetor-Diaphragm-/111536850612?nma=true&si=sxgkcKXZIB6J6WWBKkF%252B5etjuYg%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557
Samm Sheperd 1994-2018 Samm Sheperd 2018-10-01 | Samm Sheperd Tribute Video. Please consider honoring Samm's memory by donating to http://biglake.org/samm-sheperd-memorial! You may view Samm's Obituary by visiting tinyurl.com/y89m7mv8
Review: XK Edge A-430 Samm Sheperd 2018-10-01 | Previously unpublished: This is Samm's last self-produced video. Please consider donating to biglake.org/samm-sheperd-memorial*SAMM'S RECOMMENDED BASIC RC SETUP:*Radio System: - Flysky i6 - Feature packed budget starter: http://amzn.to/2jpjLAk - Taranis plus My all time favorite: http://amzn.to/2iTa7ax - 8Channel Rx: http://amzn.to/2iKWQxj - Small SBus Rx for race quads etc: http://amzn.to/2iKWQxj - 5 Basic 9g Servos: http://amzn.to/2jAIRhZ - Super Cheap 30a/1000kv ESC/MOTOR: http://amzn.to/2jARbOP - 10x4.7 Propeller: http://amzn.to/2iKYYFu - 2200 3s Battery: http://amzn.to/2k5sDyg - Bullet Plugs are nice: http://amzn.to/2kxI7bD - xt60 plugs for battery/ESC: http://amzn.to/2kEb1Jy*SOLDERING STUFF!*-Simple and cheap but probably not crap: http://amzn.to/2iKX5J2-Mid Range Weller Station: http://amzn.to/2iKZiE4-My Favorite Hakko High End Station: http://amzn.to/2jppFBo-60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not recommend lead free solder)-Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRR-Desoldering Braid is good to have around: http://amzn.to/2jANdp3-Helping hands are also wonderful: http://amzn.to/2k5ucw8*VIDEO MAKING GEAR:*- I used my iPhone for the longest - no excuses, use what you have and make stuff, don’t expect to like it, just do it! That being said I left my phone on a train in Norway and instead of replacing it I got sucked into the gear hype. Here is what I’m using now.- Sony a6500: http://amzn.to/2ibGC5c — Also check out the lower end but still awesome versions: a6300 http://amzn.to/2mj8S7g and a6000 http://amzn.to/2liOlzSI do not reccomend getting the kit lense. Yes it is small, compact and versitile. But the image quality reduces a dope camera to smart phone quality. A camera is just a tool to capture the image that a LENS makes, and the abilty to try on different lenses is what makes these cameras so much fun for me.- 18-105mm f/4 lense (a bit big and cumbersome, but impressive looking haha, it has incredible image stabilization and super versitile zoom range: http://amzn.to/2kexpcA-35mm f/1.8 prime (Great for low light and shallow depth of field, small and super fast silent autofocus): http://amzn.to/2j6iald- External Mic: http://amzn.to/2jh2DA4 - Rokinon 12mm f/2.0 is my new favorite, super fast wide angle manual prime. Extremely sharp, awesome for landscape archatecture: http://amzn.to/2liRnUA- Tripod: http://amzn.to/2ifoRlt- Fancy Photo head: http://amzn.to/2ifu24J- Slider: http://amzn.to/2ja1qcK- Ball Head: http://amzn.to/2ja9wm0- Neat LED light pannel: http://amzn.to/2l9R51T - The light also neads like 8v external or these batteries: DSTE 2x NP-F550 BatteryGoPros: Hero 5 Black: http://amzn.to/2kFmglHHero 5 Session: http://amzn.to/2kFl7Xi------------------*To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:PATREON: patreon.com/samm_sheperd?FAN FUNDING: is also enabled on my YT page (but nobody has ever actually used it)*Thanks so much to these Patrons pledging $2 or more!*Stann SheperdZachary EnengaBjörn KokPeter SripolJoshua BardwellMatt BreedenGustav SpaanhedeKeenin KrehbielNormal UniverseJean-Francois PerreaultWyatt ListonAdam DemasCaleb CromeJ Schumacher
3D Printed Rockets... Samm Sheperd 2018-03-02 | ROCKET ENGINES are cheap and super fun: http://amzn.to/2GUEXsCBut buy a LAUNCH CONTROLLER: http://amzn.to/2CSFjxoI also encourage everyone, if you haven't before and especially if you have kids, to try out normal model rocketry. Here is a kit: http://amzn.to/2oLznkHHere is that “Cheetah” Filament: http://amzn.to/2F4RY27Here is that printer I'm still using: goo.gl/uxIhPKYou have to build it and it's a pain but pretty fun if you're up for it------------------*To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:PATREON: patreon.com/samm_sheperd?FAN FUNDING: is also enabled on my YT page (but nobody has ever actually used it)*Thanks so much to these Patrons pledging $2 or more!*Peter SripolJoshua BardwellWoody HallerGeoff BowmanMatt BreendenRenohSamvaran SharmaStann SheperdZachary EnengaGustav SpaanhedeNormal UniverseCaleb CromeStan RalphJohn SeamanMatias Heinrich
Playing with Propeller Backpack v2 but with less 🔥 Samm Sheperd 2017-12-28 | Just testing it out and having fun. Chill cruising.www.instagram.com/sammsheperd*Thanks so much to these Patrons pledging $2 or more!*BlackSheepPeter SripolJoshua BardwellWoody HallerGeoff BowmanMatt BreendenRenohSamvaran SharmaStann SheperdZachary EnengaGustav SpaanhedeNormal UniverseCaleb CromeStan RalphJohn SeamanMatias HeinrichStan RalphIf you feel like it supporting:PATREON: patreon.com/samm_sheperd?Heres that RC Truck: gearbest.com/rc-cars/pp_328270.html?lkid=12494468That Charger I use: http://amzn.to/2DukUzyThe Drone used in this vid is the DJI Spark:I recommend you look for it here: http://amzn.to/2C6cimoGearbest sent just the bare drone to me and told me to include this:"Here is the coupon code for the DJI Spark: GBSparkhttp://www.gearbest.com/rc-quadcopters/pp_637651.html?wid=21With the coupon, the price of the product will drop down to $529.99"But then I purchased the controller and 2 more batteries myself. I'm blown away that that Amazon link above has it all for so good.*VIDEO MAKING GEAR:*- I used my iPhone for the longest - no excuses, use what you have and make stuff, don’t expect to like it, just do it! That being said I left my phone on a train in Norway and instead of replacing it I got sucked into the gear hype. Here is what I’m using now.- Sony a6500: http://amzn.to/2ibGC5c — Also check out the lower end but still awesome versions: a6300 http://amzn.to/2mj8S7g and a6000 http://amzn.to/2liOlzSI do not recommend getting the kit lens. Yes, it is small, compact and versatile. But the image quality reduces a dope camera to smartphone quality. A camera is just a tool to capture the image that a LENS makes, and the ability to try on different lenses is what makes these cameras so much fun for me.- 18-105mm f/4 lens (a bit big and cumbersome, but impressive looking haha, it has incredible image stabilization and super versatile zoom range: http://amzn.to/2kexpcA-35mm f/1.8 prime (Great for low light and shallow depth of field, small and super fast silent autofocus): http://amzn.to/2j6iald- External Mic: http://amzn.to/2jh2DA4 - Rokinon 12mm f/2.0 is my new favorite, super fast wide angle manual prime. Extremely sharp, awesome for landscape or architecture: http://amzn.to/2liRnUA- Tripod: http://amzn.to/2ifoRlt- Fancy Photo head: http://amzn.to/2ifu24J- Slider: http://amzn.to/2ja1qcK- Ball Head: http://amzn.to/2ja9wm0- Neat LED light pannel: http://amzn.to/2l9R51T - The light also needs like 8v external or these batteries: DSTE 2x NP-F550 BatteryGoPros: Hero 5 Black: http://amzn.to/2kFmglHHero 5 Session: http://amzn.to/2kFl7XiBASIC RC SETUP:Radio System: - Flysky i6 - Feature packed budget starter: http://amzn.to/2jpjLAk - Taranis plus My all-time favorite: http://amzn.to/2iTa7ax - 8Channel Rx: http://amzn.to/2iKWQxj - Small SBus Rx for race quads etc: http://amzn.to/2iKWQxj - 5 Basic 9g Servos: http://amzn.to/2jAIRhZ - Super Cheap 30a/1000kv ESC/MOTOR: http://amzn.to/2jARbOP - 10x4.7 Propeller: http://amzn.to/2iKYYFu - 2200 3s Battery: http://amzn.to/2k5sDyg - Bullet Plugs are nice: http://amzn.to/2kxI7bD - xt60 plugs for battery/ESC: http://amzn.to/2kEb1Jy*SOLDERING STUFF!*-Simple and cheap but probably not crap: http://amzn.to/2iKX5J2-Mid Range Weller Station: http://amzn.to/2iKZiE4-My Favorite Hakko High-End Station: http://amzn.to/2jppFBo-60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not recommend lead-free solder)-Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRR-Desoldering Braid is good to have around: http://amzn.to/2jANdp3-Helping hands are also wonderful: http://amzn.to/2k5ucw8
Fly-By-Wire FPV Race Wing from Mini Quad Parts Samm Sheperd 2017-12-06 | This video is a little late, but here it is.*To see what I'm up to as it happens, follow me on instagram.com/sammsheperdStuff Used in this Build:Emax 1306 4000kv Motor:Amazon: http://amzn.to/2kqLPrFProps: getfpv.com/racekraft-3x3-clear-4-blade-set-of-4-purple.html?gclid=CjwKCAiApJnRBRBlEiwAPTgmxOeCDghaudtaWf9SM3OVugj6g70TydFm2PR3TRBH0SuDOhJ370o8uBoCgj8QAvD_BwEDYS XM20a ESC:GB: gearbest.com/multi-rotor-parts/pp_354211.html?wid=21&lkid=12217411Coupon: DYSXM Price: $9.99 Limited 40pcs for this price!Amazon: http://amzn.to/2kq1BmLBatteries:650mah 4s: http://amzn.to/2AV2fz8RunCam EAGLE 2: GB: gearbest.com/camera/pp_679609.html?lkid=12217404Amazon: http://amzn.to/2korwLF600mw Vtx: GB: gearbest.com/fpv-system/pp_260912.html?wid=21&lkid=12217420Amazon: http://amzn.to/2BFHXX7X4R - SB:GB: gearbest.com/multi-rotor-parts/pp_343509.html?wid=21&lkid=12217422Amazon: http://amzn.to/2B2z65CDeluxe SPF3 W/ OSD:GB: gearbest.com/multi-rotor-parts/pp_436450.html?wid=21&lkid=12217430Amazon: http://amzn.to/2BOOT55LED's: Amazon: amazon.com/Lumenier-Digital-RGB-Board-6004/dp/B01HUHPLVS/ref=pd_lpo_vtph_23_lp_img_3?_encoding=UTF8&psc=1&refRID=3GDTVEPANDWB0M14SCHYGfpv: getfpv.com/lumenier-digital-rgb-arm-led-board.htmlDigital Servo: (I can’t find what I used, try these?)Amazon: http://amzn.to/2BDamx8Maybe this Push Rod will help:Amazon: http://amzn.to/2jjYAARNight Owl (Black and White Night Vision Cam):Banggood: banggood.com/RunCam-Night-Eagle2-WDR-800TVL-FOV-140-Degree-43-Black-White-Video-FPV-Camera-NTSCPAL-Switchable-p-1209503.html?p=G316224679476201605DAmazon: http://amzn.to/2B3l9V4RunCam 2 (Perfect for straping on RC things): GB: gearbest.com/action-cameras/pp_277710.html?lkid=12217590Bangood: banggood.com/RunCam-2-RunCam2-HD-1080P-120-Degree-Wide-Angle-WiFi-FPV-Camera-p-1017010.html?p=G316224679476201605DAmazon: http://amzn.to/2kqntOJFPV GOGGLES (Fat Shark Dom v3): http://amzn.to/2BORxYzReveiver Module: http://amzn.to/2BMkOTORC Controller:Taranis X9D plus: http://amzn.to/2kpPWnUTaranis Q X7: http://amzn.to/2BMWnW6GoPros: Hero 5 Black: http://amzn.to/2kFmglHHero 5 Session: http://amzn.to/2kFl7Xi------------------If you feel like it supporting:PATREON: patreon.com/samm_sheperd?FAN FUNDING: is also enabled on my YT page (but nobody has ever actually used it)*Thanks so much to these Patrons pledging $2 or more!*Woody HallerPeter SripolGeoff BowmanMatt BreendenJoshua BardwellRenohSamvaran SharmaStann SheperdZachary EnengaGustav SpaanhedeNormal UniverseCaleb Crome
Update Video and lots of flying in 4k Samm Sheperd 2017-07-13 | Soft Mounts! ebay.com/itm/253165525844?var=552256758307&ssPageName=STRK:MESOX:IT&_trksid=p3984.m1561.l2649That DJI Spark Here is a coupon code for DJI Spark: SparkIThttp://www.gearbest.com/rc-quadcopters/pp_637651.html?wid=21&lkid=10977002Here is a coupon code for DJI Mavic Pro Mini RC Quadcopter: MAVICPIThttp://www.gearbest.com/rc-quadcopters/pp_483950.html?wid=21&lkid=10977005Here is a coupon code for DJI Phantom 3 SE RC Quadcopter: FBSEIThttp://www.gearbest.com/rc-quadcopters/pp_615404.html?wid=21&lkid=10977007*VIDEO MAKING GEAR:*- I used my iPhone to make my greatest content - no excuses, use what you have and make stuff, don’t expect to like it, just do it! That being said I left my phone on a train in Norway and instead of replacing it I got sucked into the gear hype. Here is what I’m using now. (and now I got another Iphone) But I'm really digging the photography capabilities with this fancy cam.- Sony a6500: http://amzn.to/2ibGC5c — Also check out the lower end but still awesome versions: a6300 http://amzn.to/2mj8S7g and a6000 http://amzn.to/2liOlzSI do not recommend getting the kit lens. Yes it is small, compact and versatile. But the image quality reduces a dope camera to smart phone quality. A camera is just a tool to capture the image that a LENS makes, and the ability to try on different lenses is what makes these cameras so much fun for me.- 18-105mm f/4 lens (a bit big and cumbersome, but impressive looking haha, it has incredible image stabilization and super versatile zoom range: http://amzn.to/2kexpcA-35mm f/1.8 prime (Great for low light and shallow depth of field, small and super fast silent autofocus): http://amzn.to/2j6iald- External Mic: http://amzn.to/2jh2DA4 - Rokinon 12mm f/2.0 is my new favorite, super fast wide angle manual prime. Extremely sharp, awesome for landscape architecture: http://amzn.to/2liRnUA- Tripod: http://amzn.to/2ifoRlt- Fancy Photo head: http://amzn.to/2ifu24J- Slider: http://amzn.to/2ja1qcK- Ball Head: http://amzn.to/2ja9wm0- Neat LED light pannel: http://amzn.to/2l9R51T - The light also neads like 8v external or these batteries: DSTE 2x NP-F550 BatteryGoPros: Hero 5 Black: http://amzn.to/2kFmglHHero 5 Session: http://amzn.to/2kFl7XiMusic by Epidemic Sound (http://www.epidemicsound.com)------------------*To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:PATREON: patreon.com/samm_sheperd?FAN FUNDING: is also enabled on my YT page (but nobody has ever actually used it)*Thanks so much to these Patrons pledging $2 or more!*Stann SheperdZachary EnengaBjörn KokPeter SripolJoshua BardwellMatt BreedenGustav SpaanhededjKENTONormal UniverseJean-Francois PerreaultWyatt ListonAdam DemasCaleb CromeJ Schumacher
Building Propeller Backpack V2 🔥 4k Samm Sheperd 2017-02-24 | Well as promised, here's a welded aluminum frame with a cage.fire bad.Welding 101 vid: youtu.be/ZZvMsnSUDqoCheck out the original videos:Part 1: youtu.be/rbc06lwYma8Part 2: youtu.be/GHome9itH-g*MY BIG ELECTRICAL BITS:* - The New (HobbyWing) ESC which I still feel is a great product I'm just not sure what the heck happened. goo.gl/GMe5ZE -Hobbywing Program Box For ESC goo.gl/vvzSnR - Big Motor: http://amzn.to/2i5RsYQ - I'm currently using 4 of these batteries, 2 sets in series and then those 2 5000mah 12s' in parralel to make a 10000mah 12s: http://amzn.to/2j4iONjThe New Epic CARBON FIBER PROP: http://www.falconpropellers.com/products-page/falcon-2-blade-tractor-carbon-fiber/25-x-08-wide-carbon-gas*SAMM'S RECOMMENDED BASIC RC SETUP:*Radio System: - FlySky - Feature packed budget starter: http://amzn.to/2jpjLAk - Taranis - My all time favorite: http://amzn.to/2iTa7ax - 8Channel Rx: http://amzn.to/2iKWQxj - Small SBus Rx for race quads etc: http://amzn.to/2iKWQxj - 5 Basic 9g Servos: http://amzn.to/2jAIRhZ - Super Cheap 30a/1000kv ESC/MOTOR: http://amzn.to/2jARbOP - 10x4.7 Propeller: http://amzn.to/2iKYYFu - 2200 3s Battery: http://amzn.to/2k5sDyg - Bullet Plugs are nice: http://amzn.to/2kxI7bD - xt60 plugs for battery/ESC: http://amzn.to/2kEb1Jy*SOLDERING STUFF!*-Simple and cheap but probably not crap: http://amzn.to/2iKX5J2-Mid Range Weller Station: http://amzn.to/2iKZiE4-My Favorite Hakko High End Station: http://amzn.to/2jppFBo-60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not recommend lead free solder)-Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRR-Desoldering Braid is good to have around: http://amzn.to/2jANdp3-Helping hands are also wonderful: http://amzn.to/2k5ucw8VIDEO MAKING GEAR THAT I USE:- I used my iPhone for the longest time but now I'm using dope gear.- Sony a6500: http://amzn.to/2ibGC5c- 18-105mm f/4 lense (Super versatile and good for video): http://amzn.to/2kexpcA-35mm f/1.8 prime (super sharp, great shallow depth of field and great for low light) http://amzn.to/2j6iald- External Mic: http://amzn.to/2jh2DA4- Tripod: http://amzn.to/2ifoRlt- Fancy Photo head: http://amzn.to/2ifu24J- Slider: http://amzn.to/2ja1qcK- Ball Head: http://amzn.to/2ja9wm0- Neat LED light panel: http://amzn.to/2l9R51T - The light also needs like 8v external or these batteries: DSTE 2x NP-F550 BatteryGoPros: Hero 5 Black: http://amzn.to/2kFmglHHero 5 Session: http://amzn.to/2kFl7XiI use Adobe Premiere CC------------------To see what I'm up to as it happens, follow me on instagram.com/sammsheperdI think this is Caleb's IG: instagram.com/calebr2/?hl=enIf you feel like it supporting:PATREON: patreon.com/samm_sheperd?FAN FUNDING: is also enabled on my YT page (but nobody has ever actually used it)Thanks so much to these Patrons pledging $2 or more!Stann SheperdZachary EnengaBjörn KokPeter SripolJoshua BardwellGustav SpaanhedeKeenin KrehbielNormal UniverseJean-Francois PerreaultWyatt ListonAdam DemasCaleb CromeJ Schumacher
Icy Trip to Palouse Falls | 4k Samm Sheperd 2017-02-14 | In this video I got a spontaneous rush of motivation to go do something and attempt to also film it. I always struggle thinking to myself "is this interesting enough?" well in an attempt to create more content I feel this was fun enough to share and also a good excuse to share some of myself with you and work in some fun flying footage. Pics: http://imgur.com/a/yZ3dl------------------Music: soundcloud.com/joeypecoraro/fly-on-the-wallFun Fact: When I was chillin in my local student run coffee shop, shooting slow motion stuff, this song was playing and I thought it worked great with the footage I got when I was reviewing it. So it was perfect to use it in the montage to portray very accurately the mood of the moments captured.------------------TPU soft mounts on Ebay: ebay.com/itm/Samms-FPV-Race-Drone-Motor-Soft-Mount-TPU-Vibration-Dampeners-8pcs-/253165525844?var=&hash=item3af1d75b54:g:Y5cAAOSwb9dZwub9I also uploaded them on Thingiverse if you wanna print them yourself, but super squishy NinjaFlex is what I'm printing with: http://www.thingiverse.com/thing:2018045Here is the 3d Printer I'm using: http://www.banggood.com/Geeetech-Prusa-I3-X-3D-Printer-DIY-Kit-Full-Acrylic-Frame-p-1010500.html?p=G316224679476201605D------------------Camera Stuff that I used in this video:- Sony a6500: http://amzn.to/2ibGC5c - - Also check out the lower end versions of that camera: a6300 http://amzn.to/2kq9fI3 and a6000 http://amzn.to/2l1Imw9I personally don't recommend getting the kit lense. It is small and convenient but really handicaps a good camera bringing it down to smartphone image quality.- 18-105mm f/4 lense (Super versatile and epic optical image stabilization. Great for video. The constant aperture is good but still the widest aperture of f/4 isn't the greatest for low light or crazy bokeh at lower focal lengths and although impressive looking, it is a bit big and harder to travel with): http://amzn.to/2kexpcA-35mm f/1.8 prime (Used for cinematic slow-mo coffee shots. Super sharp, great shallow depth of field and great for low light) http://amzn.to/2j6ialdThe New Rokinon 12mm f/2.0 (Wide angle manual prime): http://amzn.to/2lJ9VtMShotgun Mic: http://amzn.to/2jh2DA4The New Clip Mic: http://amzn.to/2kkQ7Qk- Tripod: http://amzn.to/2ifoRlt- Fancy Photo head: http://amzn.to/2ifu24J- Stedicam: rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338018923&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2F122298000756%3F_trksid%3Dp2060353.m2749.l2649%26ssPageName%3DSTRK%253AMEBIDX%253AITGoPros: Hero 5 Black: http://amzn.to/2kFmglHHero 5 Session: http://amzn.to/2kFl7XiI've mostly been using my chesty mount: http://amzn.to/2ld59qUI should maybe get just a head mount though: http://amzn.to/2kMLsWb------------------Other Stuff I use- Slider: http://amzn.to/2ja1qcK- Ball Head: http://amzn.to/2ja9wm0- Neat LED light pannel: http://amzn.to/2l9R51T - The light also needs like 8v external or these batteries: DSTE 2x NP-F550 BatteryI use Adobe Premiere CCAnd After EffectsAnd PhotoshopAnd Lightroom------------------To see what I'm up to as it happens, follow me on instagram.com/sammsheperdI think this is Caleb's IG: instagram.com/calebr2/?hl=enIf you feel like it supporting:PATREON: patreon.com/samm_sheperd?FAN FUNDING: is also enabled on my YT page (but nobody has ever actually used it)Thanks so much to these Patrons pledging $2 or more!Stann SheperdZachary EnengaBjörn KokPeter SripolJoshua BardwellGustav SpaanhedeKeenin KrehbielNormal UniverseJean-Francois PerreaultWyatt ListonAdam DemasCaleb CromeJ Schumacher
Giant RC Air-Sled Thing | 4k Samm Sheperd 2017-02-06 | Check out the original video: youtu.be/lb7DPmaW8qsMY BIG ELECTRICAL BITS: - The New Awesome (HobbyWing) ESC: goo.gl/GMe5ZE -Hobbywing Program Box For ESC goo.gl/vvzSnR - Big Motor: http://amzn.to/2i5RsYQ - I'm currently using 4 of these batteries, 2 sets in series and then those 2 5000mah 12s' in parralel to make a 10000mah 12s: http://amzn.to/2j4iONjThe New Epic CARBON FIBER PROP: http://www.falconpropellers.com/products-page/falcon-2-blade-tractor-carbon-fiber/25-x-08-wide-carbon-gasMUSIC: soundcloud.com/malcolmlmSAMM'S RECOMMENDED BASIC RC SETUP:Radio System: - Feature packed budget starter: http://amzn.to/2jpjLAk - My all time favorite: http://amzn.to/2iTa7ax - 8Channel Rx: http://amzn.to/2iKWQxj - Small SBus Rx for race quads etc: http://amzn.to/2iKWQxj - 5 Basic 9g Servos: http://amzn.to/2jAIRhZ - Super Cheap 30a/1000kv ESC/MOTOR: http://amzn.to/2jARbOP - 10x4.7 Propeller: http://amzn.to/2iKYYFu - 2200 3s Battery: http://amzn.to/2k5sDyg - Bullet Plugs are nice: http://amzn.to/2kxI7bD - xt60 plugs for battery/ESC: http://amzn.to/2kEb1JySOLDERING STUFF!-Simple and cheap but probably not crap: http://amzn.to/2iKX5J2-Mid Range Weller Station: http://amzn.to/2iKZiE4-My Favorite Hakko High End Station: http://amzn.to/2jppFBo-60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not recommend lead free solder)-Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRR-Desoldering Braid is good to have around: http://amzn.to/2jANdp3-Helping hands are also wonderful: http://amzn.to/2k5ucw8VIDEO MAKING GEAR THAT I USE:- I used my iPhone for the longest time but now I'm using dope gear.- Sony a6500: http://amzn.to/2ibGC5c- 18-105mm f/4 lense (Super versitile and good for video): http://amzn.to/2kexpcA-35mm f/1.8 prime (super sharp, great shallow depth of field and great for low light) http://amzn.to/2j6iald- External Mic: http://amzn.to/2jh2DA4- Tripod: http://amzn.to/2ifoRlt- Fancy Photo head: http://amzn.to/2ifu24J- Slider: http://amzn.to/2ja1qcK- Ball Head: http://amzn.to/2ja9wm0- Neat0 LED light pannel: http://amzn.to/2l9R51T - The light also needs like 8v external or these batteries: DSTE 2x NP-F550 BatteryGoPros: Hero 5 Black: http://amzn.to/2kFmglHHero 5 Session: http://amzn.to/2kFl7XiI use Adobe Premiere CC------------------To see what I'm up to as it happens, follow me on instagram.com/sammsheperdI think this is Caleb's IG: instagram.com/calebr2/?hl=enIf you feel like it supporting:PATREON: patreon.com/samm_sheperd?FAN FUNDING: is also enabled on my YT page (but nobody has ever actually used it)Thanks so much to these Patrons pledging $2 or more!Stann SheperdZachary EnengaBjörn KokJoshua BardwellGustav SpaanhedeKeenin KrehbielNormal UniverseJean-Francois PerreaultWyatt ListonAdam DemasCaleb CromeJ Schumacher
Get Above the Fog! 4K Samm Sheperd 2017-01-29 | I typically like to hide behind the camera..I put some pics in an imgur album: http://imgur.com/a/dInb5Music: soundcloud.com/malcolmlmYo check out this relevant video that Flugsnug just put out today: youtu.be/s1c-O0qWQBQSince people ask about things I use:Camera stuff:- Sony a6500: http://amzn.to/2ibGC5c- 18-105mm f/4 lense: http://amzn.to/2kexpcA-35mm f/1.8 prime (for low light shots at the end): http://amzn.to/2j6iald- External Mic: http://amzn.to/2jh2DA4-Tripod: http://amzn.to/2ifoRlt-Fancy Photo head: http://amzn.to/2ifu24J-Slider: http://amzn.to/2ja1qcK-Ball Head: http://amzn.to/2ja9wm0GoPros: Hero 5 Black: http://amzn.to/2kFmglHHero 5 Session: http://amzn.to/2kFl7XiBackpack No. 1: (Purched for me for a gift)http://www.lowepro.com/quadguardNew Backpack: (Showed up at my door and I think Bob has something to do with it) thinktankphoto.com/products/fpv-airport-helipak-backpack-1The Quad:Hyperlite 3mm w/ two front armsBrotherHobby Tornado T2 Motor goo.gl/uidDLVDYS XS 30a ESC's: http://www.banggood.com/4PCS-DYS-XS-30A-3-6s-Lipo-BLheli_S-ESC-Support-Oneshot125-Oneshot42-Multishot-for-High-KV-Motor-p-1068807.html?p=G316224679476201605DMatek PDB: http://www.banggood.com/Matek-Mini-Power-Hub-Power-Distribution-Board-With-BEC-5V-And-12V-For-FPV-Multicopter-p-1005549.html?p=G316224679476201605DAwesome F4 FC: http://www.banggood.com/Raceflight-6DOF-F4-STM32F405-Flight-Controller-p-1083932.html?p=G316224679476201605DMatek LED X2/5V Motor Mount goo.gl/PYbW9eI use a RunCam Swift with 2.1mm lensIf you already have one with a 2.8mm lens, you can get a 2.1mm separately: goo.gl/pjjoOlTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/sammsheperd has fan funding enabled on the right side of the pageThanks so much to these Patreons pledging $2 or more!Stann SheperdMJ KellyZachary EnengaBjörn KokGustav SpaanhedeNormal UniverseJean-Francois PerreaultJoshua BardwellCaleb CromeJ SchumacherAdam Demas
The Sexiest Frame Ever - Neato Frames 205 Breakneck Samm Sheperd 2017-01-12 | Check them out! http://www.neatoframes.comIG: instagram.com/neatoframesNich: instagram.com/nichyneatoJustin: instagram.com/itwillbefun.fpvJustin also has a YT: youtube.com/channel/UC24xWaOFhqNNbGjg-JHd-BgPARTS I USED:Frame: http://www.neatoframes.com/product/breakneckMotors: http://www.banggood.com/BrotherHobby-Returner-R3-2206-2140KV-2300KV-2600KV-3-4S-Brushless-Motor-for-FPV-Racer-p-1098396.html?p=G316224679476201605D (Here is the new version of those motors): http://www.banggood.com/BrotherHobby-Returner-R4-2206-2300KV-2600KV-Brushless-Motor-for-FPV-Multicopters-p-1104840.html?p=G316224679476201605DESC: (not the one I used but would use this if I did it again) http://www.banggood.com/Favourite-FVT-LittleBee-PRO-20Ax4-ESC-With-5V-BEC-BLHeli-2-4S-F396-OneShot125-For-RC-Multirotors-p-1048318.html?p=G316224679476201605DAwesome simple affortable F4 board: goo.gl/lN67pqEagle FPV Cam: goo.gl/xga82XVtx: fpvheadquarters.com/fpv/5-8-ghz/vtx/angry-beez-fx799t-200mw-40-ch-video-transmitter.html (This one is similar): http://amzn.to/2ifjzWWThat braided sleeve stuff for wires: http://amzn.to/2imqYm2Clear Props: http://amzn.to/2ifxjRAThat crazy antenna is home made. Normally considered a receiving antenna, but screw "normal" it works and looks sick.My goggles: http://amzn.to/2ipNk7JMy Transmitter: http://amzn.to/2jLpzTMBest Receiver: http://amzn.to/2jSgigMMusic: soundcloud.com/azaleh/azaleh-forever-in-my-heartSOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Mid Range Weller Station: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not reccomend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8My Camera Gear:Camera (used in this vid): http://amzn.to/2ja3p0YTripod: http://amzn.to/2ifoRltFancy Photo head: http://amzn.to/2ifu24JSlider: http://amzn.to/2ja1qcKBall Head: http://amzn.to/2ja9wm0ON THE WAY:Sony a6500http://amzn.to/2ibGC5cPrime lensehttp://amzn.to/2j6ialdContact:Sammshep(at)gmail.comTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/sammsheperd has fan funding enabled on the right side of the pageThanks so much to these Patreons pledging $2 or more!Stann SheperdMJ KellyZachary EnengaBjörn KokGustav SpaanhedeNormal UniverseJean-Francois PerreaultJoshua BardwellCaleb CromeJ SchumacherAdam DemasDisclaimer: I reached out the Neato Frames to propose this idea, they were super cool about and said they'd send me a frame. I purchased most of the other parts. Though some were sent by Banggood.com and most but not all of the above links are affiliate links where I (theoretically) can earn commition.
Propeller Backpack Part 2 Samm Sheperd 2016-12-29 | I'm gonna get a better ESC, build an aluminum frame with an enclosure for the prop, and make more videos :) - Part 1: youtu.be/rbc06lwYma8MY ELICTRICAL PARTS: - MOTOR http://amzn.to/2i5RsYQ - Here is the new ESC on the way: http://www.banggood.com/Hobbywing-Platinum-HV-130A-V4-Brushless-ESC-For-RC-Model-p-1049528.html?G316224679476201605D - I'm currently using 4 of these batteries, 2 sets in series and then those 2 5000mah 12s' in parralel to make a 10000mah 12s: http://amzn.to/2j4iONjI HAVE THIS EPIC PROP ON THE WAY: http://www.falconpropellers.com/products-page/falcon-2-blade-tractor-carbon-fiber/25-x-08-wide-carbon-gasSOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Mid Range Weller Station: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not recommend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8If you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/sammsheperd has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.comTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdCheck out the super cool guys at FPVHQ! (I buy from them all the time) fpvheadquarters.comThanks so much to my awesome Patrons pledging $2 or more!Stann SheperdMJ KellyZachary EnengaBjörn KokGustav SpaanhedeNormal UniverseJean-Francois PerreaultJoshua BardwellCaleb CromeJ SchumacherAdam Demas
How to Waterproof Electronics (the clean way) Samm Sheperd 2016-12-24 | I found it on EBAY! rover.ebay.com/rover/1/711-53200-19255-0/1?icep_id=114&ipn=icep&toolid=20004&campid=5338018923&mpre=http%3A%2F%2Fwww.ebay.com%2Fitm%2FMG-Chemicals-422B-55ML-Silicone-Conformal-Coating-55ML-Bottle-%2F331529435370%3Fhash%3Ditem4d30b1b8ea%3Ag%3A7vMAAOSwqu9VLAISHere is the product that I bought: http://amzn.to/2iVkf3jBigger Aerosol version : http://amzn.to/2j4sfMXThey also make an acrylic coating. Not sure what difference that would makehttp://amzn.to/2iVg9bKBigger Aerosol: http://amzn.to/2j4nd2ZHEY btw I'm making these soft mounts for quads if you wanna check them out: www.ebay.com/itm/8pcs-Motor-Soft-Mount-TPU-Vibration-Dampeners-/252795904987Here is that tube of Rosin Flux that I used when resoldering and in general I super recommend having some around! Keeps your joints so shiny! Ditch that oxidation! http://amzn.to/2i1WYNJThe Nex X5 that I first experimented with is made by Avant Quads: http://avantquads.comThe other that I used in a lot of the footage is the legendary sexy Neato 205 made by: http://www.neatoframes.comSOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Mid Range Weller Station: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2lPaYuJ(I do not reccomend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.comThanks so much to these Patrons pledging $2 or more!Stann SheperdMJ KellyZachary EnengaBjörn KokGustav SpaanhedeNormal UniverseJean-Francois PerreaultJoshua BardwellCaleb CromeJ SchumacherAdam DemasMusic around 2:20 something: The Chainsmokers - Closer ft. Halsey (T-Mass Remix)
Propeller Backpack Part 1 Samm Sheperd 2016-12-22 | Part 2 youtube.com/watch?v=GHome9itH-gHere I that awesome motor I bought: http://amzn.to/2i5RsYQHere is the new ESC I'm getting: http://www.banggood.com/Hobbywing-Platinum-HV-130A-V4-Brushless-ESC-For-RC-Model-p-1049528.html?G316224679476201605DI'm currently using these batteries in series to make a 12s: http://amzn.to/2j4iONjSOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Mid Range Weller Station: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not recommend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8To see what I'm up to as it happens, follow me on instagram.com/sammsheperdThanks so much to these Patrons Pledging $2 or more!Stann SheperdMJ KellyZachary EnengaGustav SpaanhedeNormal UniverseJean-Francois PerreaultJoshua BardwellCaleb CromeJ SchumacherIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
FLYING DOOR Samm Sheperd 2016-11-28 | Thanks Patrons for helping out with this :Dpatreon.com/samm_sheperd?These links all kinda suck sorry.That Big Motor! Emax 5335 200kv : http://www.hobbypartz.com/66p-190-gt5335-10-kv200.htmlBig ESC http://www.buddyrc.com/ztw-gecko-150a-high-voltage-aircraft-esc.html10s Lipo hobbyking.com/en_us/zippy-compact-4000mah-10s-25c-lipo-pack.htmlTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdThanks to these Patrons pledging $2 or more :)Stann SheperdMJ KellyZachary EnengaGustav SpaanhedeNormal UniverseJean-Francois PerreaultJoshua BardwellCaleb CromeJ Schumacher
Racing FPV Kits - GB-X220 & GB-X210 Samm Sheperd 2016-11-25 | GB X-220 Kit: http://www.gearbest.com/multi-rotor-parts/pp_448102.html?lkid=10233923GB X-210 Kit: http://www.gearbest.com/multi-rotor-parts/pp_448106.html?lkid=10233918SOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Mid Range Weller Station: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not reccomend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8The printer I have: http://bit.lc/3V9jOther 3D printers: http://bit.ly/2eLHSXr Here is some good standart PLA Filament http://bit.lc/3V95Disclaimer time:I was not paid any money to make this video, but both kits were sent free of charge. Funny story.. they keep trying to send me stuff but I keep saying nah. I casually mentioned that these both look like decent kits. A week or so later they show up at my door...Gearbest tends to have good prices, but shipping can also take a long time.To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
My Personal 3D Printer! Samm Sheperd 2016-11-07 | The printer I have: goo.gl/uxIhPKOther 3D printers: goo.gl/hqR3WlHere is some good standard PLA Filament: goo.gl/P0F8OPTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
AvantQuads NEX X5 is pretty dope Samm Sheperd 2016-10-23 | No I was not paid to make this videoCheck them out here: http://avantquads.comHere is that F4 flight controller: http://bit.lc/3WhWHere are those ESC's: http://www.gearbest.com/multi-rotor-parts/pp_403126.html?wid=21&lkid=10235131Red Bottom Motors: http://www.gearbest.com/multi-rotor-parts/pp_300511.html?wid=21&lkid=10235125To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
FPV Rectangle Samm Sheperd 2016-10-23 | To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
NORWAY FPV Samm Sheperd 2016-09-21 | Went on a trip to Frankfurt, Amsterdam, Oslo, Bergen, and London. The only day I had enough time to rent a car and find some good flying spots I was in Bergen and I only had 3 batteries and no charger.Song: Sunset lover by petit biscuitTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
How To Setup 3D Samm Sheperd 2016-09-07 | Software:CleanFlight Configurator: http://tinyurl.com/mdek2lqORtry BetaFlight Configurator: http://tinyurl.com/jzd2ttt***BLHeli CONFIGURATOR IS OUT NOW AND IT'S A CHROME APP AND IT WORKS ON EVERY COMPUTER TRY IT OUT: chrome.google.com/webstore/detail/blheli-configurator/mejfjggmbnocnfibbibmoogocnjbcjnk?hl=enOld school PC program BLHeli Suite: blhelisuite.wordpress.comTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
I tried 3D FPV flying Samm Sheperd 2016-09-07 | I decided to figure out reverse thrust inverted "3d" setup and flying this last week. Here is a video of my results so far. I have a "how to" video being release with this one also: youtu.be/lI1zhGpWkQgTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
FPV Quadcopter Build Tutorial Samm Sheperd 2016-09-02 | Find the kit here: http://www.gearbest.com/multi-rotor-parts/pp_413710.html?wid=21&lkid=102351331:38 make sure flight controller works5:00 Connect ESC’s to motors6:56 Connect ESC’s to PDB9:40 Connect ESC’s to FC13:26 Test and fix motor directions14:39 Calibrate ESC’s and motor speeds19:35 Connect FPV Equipment23:00 Receiver time! And flight modes.27:25 Camera mounting and finishing up29:37 Optional using BLHeli Suite program32:04 Final thoughts and flight testOther equipment I recommend:-- DALProp Cystal: http://tinyurl.com/gl6zjyq-- Nylon stand offs: http://amzn.to/2iSokou-- Battery pigtail: http://tinyurl.com/jmsa2sq-- Battery Straps: http://amzn.to/2iSzTw7FPV Camera: -- RunCam OWL PLUS camera http://www.gearbest.com/fpv-system/pp_452891.html?wid=21&lkid=10244701OR-- Runcam Swift amazon.com/Crazepony-RunCam-600TVL-Blocked-Multicopter/dp/B01F381J9Y/ref=sr_1_1?ie=UTF8&qid=1480637666&sr=8-1&keywords=runcam+swift+2.1OR-- hs1177-- 65C 4s LiPo Battery http://bit.lc/4ZAI-- or these are awesome http://amzn.to/2isMcMs-- Video Transmitter: fpvheadquarters.com/fpv/5-8-ghz/vtx/angry-beez-fx799t-200mw-40-ch-video-transmitter.html-- Aomway Antennas http://bit.lc/4ZAWGROUND EQUIPMENT*Can be used for infinite number of flying machines.-Radio Control - I recommend Taranis: http://amzn.to/2iXAc9k - And X4RSB http://amzn.to/2j7fzVc - A good budget alternative is the Flysky something and an "Ibus" receiver - http://amzn.to/2iXBDVk - http://amzn.to/2iXxa55*FrSky and FlySky are completely unrelatedVideo Goggles! - My #1 choise are the Dominator v3's: http://amzn.to/2i81RDe - - Also needs VRx: http://amzn.to/2iXxm3X - Budged starter set review here: youtu.be/_FVjqseBmn4CHARGER:My charger I've used for years. Built in Power supply and comes with connectors: http://amzn.to/2kXakYCIDST: this charger is awesome, powerful, smart, and easy to use. But does not come with a power supply or connectors, so you'll need to make or source your own: http://amzn.to/2kXlQTCSoftware:CleanFlight Configurator: http://tinyurl.com/mdek2lqORtry BetaFlight Configurator: http://tinyurl.com/jzd2tttBLHeli Suite: blhelisuite.wordpress.comThey have a CHROME APP FOR BLHELI STUFF NOW!:chrome.google.com/webstore/detail/blheli-configurator/mejfjggmbnocnfibbibmoogocnjbcjnkSOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Mid Range Weller Station: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not reccomend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8Painless360's playlist: youtube.com/watch?v=6iDgPSECiM0&list=PLYsWjANuAm4pnhS9StKcIbwSOdoMaR9-pCheck out this cool FPV 101 page for FAQ's fpvheadquarters.com/fpv101To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Visual Angle of Attack Indicator Samm Sheperd 2016-08-29 | The oscillations in the instrument are not noise, they are accurate representations of the turbulence in the air rapidly changing the wings AOA and thus rapidly changing it's lift and thus shaking the plane!To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Dubai 210 Edit Samm Sheperd 2016-08-26 | Find the Dubai 210 kit here: http://www.gearbest.com/multi-rotor-parts/pp_413710.html?wid=21&lkid=10235133Build Video! youtube.com/watch?v=b6rfS1YO-lE&feature=gp-n-y&google_comment_id=z13re1egywbmxhoqy04cetuovyyxz1bo5os0kSong: soundcloud.com/iamlark/odesza-say-my-name-lark-remixDisclaimer: The kit was sent in exchange for some video, I thought I could use it to show a quadcopter build and share some tips and tricks and inspire people.I'm running Beta Flight 3.0 firmware with .71 rates and about 18%expo.Dal Crystal props: fpvheadquarters.com/multirotors/props/dalprops/dalprop-t5045-v2-crystal-props.htmlThis video transmitter: fpvheadquarters.com/fpv/5-8-ghz/vtx/angry-beez-hawkeye-32ch-200-mw-5-8-ghz-mini-vtx.htmlCustom made video antenna from:instagram.com/p/BJJpwfpDyWL/?taken-by=giles_pidHere is a link(http://goo.gl/TyxZUI) to Gearbest.com's "JJRC Brand Sale" promotion activityTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Review | Kylin FPV Goggles Samm Sheperd 2016-08-24 | Find the Goggles here:http://www.gearbest.com/fpv-system/pp_363261.html?wid=21&lkid=10235142Pros:Good priceAwesome ease of useLots of channelsAuto-scanUSB ChargingON/OFF button!built in speakerCons:Little nose heavy with the battery up thereUnrefined ergonomics (fits funny, has that sharp nose piece)Here is a link(http://goo.gl/TyxZUI) to Gearbest.com's "JJRC Brand Sale" promotion activityTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Review | Tarot 130 FPV Quad Samm Sheperd 2016-08-24 | The Tarot 130 is a miniature version of a high performance FPV race drone.Find the Tarot 130 Quad here: http://www.gearbest.com/rc-quadcopters/pp_363734.html?lkid=10235145Honestly it doesn't matter PAL or NTSC. But the old school 'standard' is NTSC for North America and PAL for Europe etc.PROS:-It's super configurable for those with quadcopter experience to tune it to their liking (or for noobs to try it out)-It's so cute!-Can fit through tight gaps-The FPV quality is pretty great.-Really quite a fast exploration machine.CONS:- Video antenna needs to be secured-Access to USB is blocked by stand off (just remove it and don't put it back)-It's a little over built and under powered-Motors are not well balanced, still flies good but makes annoying sound.-Other Toys & Hobbies at GearBest: http://goo.gl/eyqU4b To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
CNC Longboard Project Samm Sheperd 2016-08-05 | Here I share my experience developing a process to use CAD and CAM software and CNC processes to design and manufacture a custom longboard.To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Taking Apart Engine Samm Sheperd 2016-07-28 | By popular opinion this is publicly listed now.This video is a bonus video form thing from another video: youtu.be/zfGm0gZhgCcTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
The Unbreakable Kabab 5 Samm Sheperd 2016-07-28 | Thanks youtube.com/c/kabab for the sweet frame!Find the Kabab 5 frame here: (no longer avalible, see his new hyperlite series) http://pirofliprc.com/search.asp?keyword=Kabab&search.x=15&search.y=10And Thanks Gearbest.com and Banggood.com for helping with this build!Here are the parts I used:NAZE32 SP Racing F3 Flight Control Acro 6 DOF Fitting ( http://goo.gl/i1kPrb ) --Coupon: RacingF3 Price: $15.30DYS SE2205 Brushless Motor 2300KV ( http://goo.gl/r6fo8T ) ---Coupon: SE2205jie Price: $11.9965C 4s LiPo Battery http://bit.lc/4ZAIFX795T-2 AV Transmitter http://bit.lc/4ZA2Matek PDB http://bit.lc/4ZAnRunCam OWL PLUS camera http://bit.lc/4ZADAomway Antennas http://bit.lc/4ZAWAikon 30a ESC BLHeli_s: http://rotorgeeks.com/index.php?route=product/product&product_id=550Dalprop 5045 (1.99!) http://www.surveilzone.com/2-Pairs-Quad-blades-DALPROP-Q5040-Props-Racing-Edition-g-1504Other Toys & Hobbies at GearBest: http://goo.gl/eyqU4b So that funny pink couch thing..:Inflatable Folding Sleeping Lazy Bag with Mesh Pocket: http://goo.gl/aOkiqI Inflatable Folding Sleeping Bag: http://goo.gl/gAJ5qj Camping Gears: http://goo.gl/R95i7n To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
How Alternator works + DIY Voltage Regulator Samm Sheperd 2016-07-26 | Taking Apart Engine: youtu.be/9iB_WXjdgVsI thought I had an idea about how this stuff worked, so I built this rig to see if I was right. I'm sure they use a more sophisticated voltage regulator but this proved the concept for me.Get a cheap Arduino and play with it!: http://amzn.to/2iE9T8KMany things were diluted into a basic conceptual understanding that I wanted to get across. Physicists and Engineers please don't be mad at me.To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Lazy Bag on a Cliff Samm Sheperd 2016-07-18 | Visiting the camp I worked at, I thought I'd climb my favorite thing and share a bit with you.Inflatable Folding Sleeping Lazy Bag with Mesh Pocket: http://goo.gl/aOkiqI Inflatable Folding Sleeping Bag: http://goo.gl/gAJ5qj Camping Gears: http://goo.gl/R95i7n Disclaimer: The portable couch thing was sent to me free of charge in exchange for including the links above. The video was not made for the purpose of showing off the product, I just happened to have it and it was awesome. I do really like it and it's of great durability and they are pretty good deals.To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Review | XK A600 - DHC-2 BEAVER Samm Sheperd 2016-06-19 | Check out this airplane here: XK A600: http://www.gearbest.com/rc-airplanes/pp_226788.html?wid=21&lkid=10235151And here's the spare parts: http://goo.gl/gzDbF0The flash deals will last 4 days.http://goo.gl/KzfwQ4 Hey thanks for watching! I try not to do reviews much, but if I do there must be a good reason. I love the DHC-2! And I wanted to show off a little from my flight to Alaska (I logged 40 hours flying there and back!) Who knows, maybe all these tiny RC parts might make a cool project later!Here is a link(http://goo.gl/TyxZUI) to Gearbest.com's "JJRC Brand Sale" promotion activityTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
I Made My Own FPV Race Drone Samm Sheperd 2016-06-15 | Thingsverse: http://www.thingiverse.com/thing:1790522That which I do not make, I cannot truly understand. This has been my experience making my own mini quad frame from scratch and taking advantage of my school's 3d printer and CNC machines.-- Flycolor RAPTOR BLHeli 2-4S 20A OPTO ESC Fitting for 170-330 DIY Multirotor Model - 4Pcs: http://goo.gl/na9gvw Speical Price 29.99 with Coupon: JRFTB -- Runcam Swift FPV Mini Camera High Definition - NTSC SYSTEM: http://goo.gl/Wc5AGk Speical Price 35.99 with Coupon: JRRSCAnd you can find other hobby stuff here: http://goo.gl/ohlz5c-- The SP Racing F3 (Naze32) Flight Controller: http://goo.gl/kcLJnP And this is a link to Banggood Flash Deals: http://goo.gl/Fr7jkSPainless360's awesome playlist on the above flight controller: youtube.com/playlist?list=PLYsWjANuAm4ro1vHztauuHFaelUDCOwqwFPV Kabab's new sweet video: youtube.com/watch?v=xyCnq2oNSkkTo see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Review | TN4A Flashlight - 1050 Lumens Samm Sheperd 2016-04-30 | Amazon link: http://amzn.to/2xwQEUOIn this video I share my experience with the ThruNite TN4A flashlightThis is my first review, I thought I'd try it out and see how it goes.Turbo mode is nice to show off to friends but medium is plenty for walking around at night, which is nice because that will last alot longer.Some Specs:Firefly 0.5 lumens/80 daysLow 15 lumens/93 hrsMed 139 lumens/14 hrs High 550 lumens/150 mins Turbo 1150 lumens/56 mins Strobe 1150 lumens/150 mins Lens Tempered glass w/AR Coating If you are interested in checking out ThruNite or their products, you can use any of these links:Official Store: http://www.thrunite.comAmazon US: http://www.amazon.com/thruniteAmazon CA: http://dwz.cn/1eGTT0Amazon UK: http://amazon.co.uk/shops/A2DUUB2J3TY3X1Amazon DE: http://amazon.de/shops/A2DUUB2J3TY3X1Amazon FR: http://amazon.fr/shops/A2DUUB2J3TY3X1Amazon IT: http://amazon.it/shops/A2DUUB2J3TY3X1 To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting, thanks so much!https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Water Cooled 72,000 Lumen LED Flashlight!! Samm Sheperd 2016-04-27 | People wanting a big light for their car: light bars exist now, cheaply and reliably http://amzn.to/2noXgNeHere's that neat 1150 lumen light: http://amzn.to/2xwQEUOFAQ's!!!Q: why are you only turning it on for short bursts?A: The reason is just that I only had one night with the camera guy to get all the shots and I was paranoid of losing battery. The other reason is that it's so bright that it's annoying and I loose the ability to see at nightQ:Will it eventually overheat? A: No, it can run off a power supply continuously with a stable coolant temperature.Q: How long does the battery last?A: The small battery back I'm using is made out of batteries I already had, and they will last 6 minutes. A bigger battery is easyLED Chips: http://amzn.to/2uRv1LuLENSES: http://amzn.to/2mdrAJNResistors http://amzn.to/2iYhZIBI recommend using Boost converters to drive the LED's from 12v or so (No resistors, one per chip, can also drive the cooling stuff with the same 12v): http://amzn.to/2mdkt3QCooling Blocks: http://amzn.to/2lBbvkvTubing http://amzn.to/2i4Aw6yPump: http://amzn.to/2iYgryxSuper neat pump/reservoir combo (much easier than hacking a bottle and much less likely to leak..) http://amzn.to/2lHT4dtHeat Exchanger: http://amzn.to/2j8efBxBatteries (3) http://amzn.to/2xosKKP (connect in series for direct drive w/ resistors, connected in Parallel for 12v system with boost converters)Super simple LiPo Charger: http://amzn.to/2meH7K3**Don't over discharge your batteries! Research how to use LiPo batteries and monitor your cell voltage!! This product will monitor the cells and sound an alarm when they reach a low limit http://amzn.to/2lNiiYnThermal Glue http://amzn.to/2jxiDOgSOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Another Cheaper option: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not reccomend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8Here's an Imgur album of pictures taken that night! http://imgur.com/a/dz4y8Yes I would like to have used constant current drivers, but those would take up space and money that I don't have.I made this back in February, but only got around to filming it a couple weeks ago. Thanks so much to Caleb Riston for the DSLR equipments and skills!Thanks to ThruNite Flashlights for offering to send me a flashlight to use in this video! Any positive opinion of the flashlight is Caleb's or my honest opinion - but there is no way around the bias of free things.If you would like to check out their flashlights, you can use any of these links:Official Store: http://www.thrunite.comAmazon US: http://www.amazon.com/thruniteAmazon CA: http://dwz.cn/1eGTT0Amazon UK: http://amazon.co.uk/shops/A2DUUB2J3TY3X1Amazon DE: http://amazon.de/shops/A2DUUB2J3TY3X1Amazon FR: http://amazon.fr/shops/A2DUUB2J3TY3X1Amazon IT: http://amazon.it/shops/A2DUUB2J3TY3X1 If you want to see what I'm up to in real time: instagram.com/sammsheperdIf you feel like it supporting me, thank you so much!https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Adverse Yaw - Explained and Demonstrated Samm Sheperd 2016-04-17 | Well I said I'd do this in my other video, so I guess I'll follow through. Educational videos take so much effort...To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
My First Try at a Quad Samm Sheperd 2016-04-10 | Here's that 4 set of motors and ESC's http://amzn.to/2iTgRn8This video is about my experience playing with multirotors on a budget. My hope is that by showing my experience, others will at least gain insight and maybe be inspired to try this stuff too.I've learned a long time ago and it is still true today that quality is cheaper and safer and less trouble in the long run.Also here is my reccomend Battery: http://amzn.to/2ifn282It's a very popular and affordable size for most RC things.A good simple PDB http://amzn.to/2jy2BzqA good PDB with 5 and 12v output options: http://amzn.to/2ifmzCFA good and cheaper flight controller: http://amzn.to/2kqJ6bUThe Fancy Flight Controller I used: 3DR APM 2.6Newer version of it: 3DR PixhawkRadio System: http://amzn.to/2kqJirE To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
RC Flying Rectangle Samm Sheperd 2016-03-28 | Intro to RC Electronics: youtube.com/watch?v=j61Q3e8AFR4Flying Wing CG Calculator: http://fwcg.3dzone.dk/Chris Corbett made this!: youtube.com/watch?v=sUAKHxpjgr8Caleb Crome made this!: youtu.be/YLTE1QsEDnYAlbert made this!: youtube.com/watch?v=tRVJTHLlUB4This isn't an exhaustive How-To, but hopefully it gets you to try this stuff too and learn from the process!Also note that the flying wing CG calculator will help you calculate the required CG location for any wing shape you can think of! There are also calculators for conard confuguration and even conventional configuration. Though 1/3 the way back from the leading edge always works for that one.SAMM'S RECOMMENDED BASIC SETUP:Radio System: - Feature packed budget starter: http://amzn.to/2jpjLAk - My all time favorite: http://amzn.to/2iTa7ax - 8Channel Rx: http://amzn.to/2iKWQxj - Small SBus Rx for race quads etc: http://amzn.to/2iKWQxj - 5 Basic 9g Servos: http://amzn.to/2jAIRhZ - Super Cheap 30a/1000kv ESC/MOTOR: http://amzn.to/2jARbOP - 10x4.7 Propeller: http://amzn.to/2iKYYFu - 2200 3s Battery: http://amzn.to/2k5sDygSOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Mid Range Weller Station: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not reccomend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8 To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Lead Acid Powered Plane Samm Sheperd 2016-03-28 | Decided to take a step back in battery technology just for the fun of it.SAMM'S RECOMMENDED BASIC SETUP:Radio System: - Feature packed budget starter: http://amzn.to/2jpjLAk - My all time favorite: http://amzn.to/2iTa7ax - 8Channel Rx: http://amzn.to/2iKWQxj - Small SBus Rx for race quads etc: http://amzn.to/2iKWQxj - 5 Basic 9g Servos: http://amzn.to/2jAIRhZ - Super Cheap 30a/1000kv ESC/MOTOR: http://amzn.to/2jARbOP - 10x4.7 Propeller: http://amzn.to/2iKYYFu - 2200 3s Battery: http://amzn.to/2k5sDygSOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Mid Range Weller Station: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not reccomend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8Carlee wants me to try using Instagram again, so if you're into that: instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
3D Printed Flying Wing Pod Samm Sheperd 2016-03-13 | - Flying it FPV: youtu.be/gSsRhIaUJa4- Thinsverse as requested I guess: http://www.thingiverse.com/thing:1412963- Bearings used both for replacing motor bearings, and for supporting the shaft at the end of the pod: http://www.ebay.com/itm/251149974179?...- 200mm long 3mm shaft: http://www.ebay.com/itm/321896439905?...The pod's walls are made of two 1 layer thick walls separated by 3mm and 3% infill. Or you could just say 3mm thick hollow walls. To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.comThanks to my Patreon Supporters:Stann SheperdJanette Zachary EnnengaJeremiah WhiteJoshua A.C. Newman (joined sinse last video!)Austin HooperMason BiallyMKme Lab
Engineered Mini Flying Wing Samm Sheperd 2016-02-29 | This video is about the time when I ventured into the dangerous waters of engineering. It was pretty neat I guess.Endurance Record Flight: https:youtube.com/watch?v=IhEL0IVXaYoOh Nathan, the stability guy has a youtube channel, I'll link it here : youtube.com/user/TheGospelMegaphoneA viewer shared a video flying a scaled up version: youtu.be/fpoMi3v-i7cThis video has been on the back burner for almost a year now, I just spent a solid several days working on this. Now to catch up on my homework. To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.comThank you Patreon supporters!Stann SheperdJanette Zachary EnnengaJeremiah WhiteAustin HooperMason BiallyMKme Lab
RC Electronics for Noobs Samm Sheperd 2016-01-21 | one easy way to make an airplane: youtube.com/watch?v=aV5hILJe20UEd's folded foam board "armin Wing": youtube.com/watch?v=qJZoqGHAIDEHow to solder stuff youtube.com/watch?v=mH32jwFc8Jshow to choose power system youtube.com/watch?v=RwxQyU6zEFcInfo about motors youtube.com/watch?v=JQkTm-vuFGIInfo about ESC youtube.com/watch?v=22CpRl2_TRIInfo about Battery youtube.com/watch?v=-vK8o9Y84gM&feature=iv&src_vid=yJ-QyHiiqUI&annotation_id=annotation_2458532501Info about Servos youtube.com/watch?v=D-QTSghkqVkInfo about Radios youtube.com/watch?v=RrrHZ8VfC3YSAMM'S RECOMMENDED BASIC SETUP:Radio System: - FlySky i6 - Feature packed budget starter: http://amzn.to/2jpjLAk -FrySky - My all time favorite: http://amzn.to/2iTa7ax - 8Channel Rx: http://amzn.to/2iKWQxj - Small SBus Rx for race quads etc: http://amzn.to/2iKWQxj - 5 Basic 9g Servos: http://amzn.to/2jAIRhZ - Super Cheap 30a/1000kv ESC/MOTOR: http://amzn.to/2jARbOP - 10x4.7 Propeller: http://amzn.to/2iKYYFu - 2200 3s Battery: http://amzn.to/2k5sDygSOLDERING STUFF!Simple and cheap but probably not crap: http://amzn.to/2iKX5J2Mid Range Weller Station: http://amzn.to/2iKZiE4My Favorite Hakko High End Station: http://amzn.to/2jppFBo60/40 Rosin Core Solder: http://amzn.to/2iKZiE4(I do not reccomend lead free solder)Extra Tube of Rosin is always nice: http://amzn.to/2k5vZRRDesoldering Braid is good to have around: http://amzn.to/2jANdp3Helping hands are also wonderful: http://amzn.to/2k5ucw8 To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
Last Day at the Beach Samm Sheperd 2016-01-05 | Winter break at the parent's house is over, time to go home.Sorry I didn't make anything for this one, just played with stuff I already made.Music by soundcloud.com/jeff-kaale
This is NOT a Propeller Samm Sheperd 2015-12-27 | The HD cam on the plane was a Mobius Action Cam http://amzn.to/2nxTSR7But I also recommend this newer more rugged one http://www.gearbest.com/action-cameras/pp_277710.html?wid=21&lkid=10613525Or amazon http://amzn.to/2odcHMwSo I made a centrifugal fan.. And then built an airplane around itBonus footage: http://youtu.be/YTe8U_WO_BoFor clarification: I did not use the AC motor from the heater, but rather I put the impeller onto a much more powerful BLDC motor as commonly used in RC. To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
RC Ski Plane | Awesome Fun Samm Sheperd 2015-12-24 | how to make airplane: youtube.com/watch?v=aV5hILJe20USkis are like the ultimate take off and landing funUsually ski planes are tail draggers, but this seemed to work fine.Patreon if you feel like it. It would help. www.patreon.com/samm_sheperd
How do Vortex Generators Work? Samm Sheperd 2015-11-16 | Viewer Submitted VG design in the wind tunnel: youtube.com/watch?v=_wOIALPBrwkSome more thoughts as I think of them:In short:What they do:They help air flow around things (shrink the wake/separation bubble) and help air stay attached to wings at large angles of attack.How they do it:They "energize" the boundary layer by mixing the slow layers with fast layers.Vortex generators are nothing fancy. Any little fin sticking in the air at an angle to the wind will work. there are even other non "fin" type objects that work. (like an "air tab")The back side of a cyliner or my rear windshild can be thought of like a wing at a high angle of attack! Airflow separation and stalling an airplane wing are the same thing. Wings can stall also because of sharp leading edges, making the airflow separate suddenly up front instead of starting from the back. This leads to abrupt and "sharp" stall characteristics.Experimental Slat Plane youtube.com/watch?v=WH8kCTzy91AFeatured plane build youtube.com/watch?v=aV5hILJe20UInviscid flow ball http://www.allstar.fiu.edu/aero/Flow1.htmMoving inviscid flow ball en.wikipedia.org/wiki/Potential_flow_around_a_circular_cylinderIdeal flow vs Actual Flow http://studydroid.com/imageCards/0m/h7/card-23632917-back.jpgBoundary Layer: youtube.com/watch?v=7SkWxEUXIoMEnding Porsche in a wind tunnel youtube.com/watch?v=pplOtFq_2PY To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
$5 Trainer Build Techniques Samm Sheperd 2015-11-07 | FAQ'sI used the standard small "9 gram" servos like I use on everything. I used a 2200mah 3s and a 3200mah 3s but It could carry a 1000mah or even a 4000mah. The motor was an eflight park 400 with 18 amp esc. but that motor is way expensive compared to the generic ones.Nosewheel mount/hing thing: http://www.hobbyking.com/hobbyking/store/__8432__Front_Wheel_Steering_Arm_Mount_Set_40mm_5sets_.htmlTo learn more about the RC ELECTRONICS: https://www.youtube.com/watch?v=j61Q3..."$5 Trainer" original video https://www.youtube.com/watch?v=LKt6b...I apologize that the title of the referenced video is misleading as the cost of materials in not $5. When I originally made it, I only had to buy a $5 sheet of foamboard and all the other materials I found laying around my parents house. The name has since sorta sunk in and I'm not sure I can undo it. I made the "$5 trainer" while on Christmas vacation at my families house home from college. I wanted to do a project with my little brother. I had been doing some rather tedious and complicated projects (chainsaw plane and I put an autopilot on my big flying wing but didn't make a video about that) and I wanted a break and to do a simple project to get back to my roots and demonstrate that you don't need to do a whole lot to make an airplane.I was surprised by how many people requested a build video, because I don't particularly like watching build videos, though there are interesting insights and tips, they are just long and I'd rather be making my ideas come to life (or actually working on my degree).But I didn't feel like rebuilding that same plane, partly because I don't still have that blue wonder motor but also because I would rather spend my time making new things.So this video is a new airplane design, but made with the same materials and techniques as were used on the "$5 Trainer."Hope I can inspire others and provide insights on my work flow. This is a fun method because you can make the fuselage have whatever cross section you want and make things look kind of scale. As opposed to a hollow square foam tube.I love to help people with questions so PM me or comment.here is a list of stuff someone made and it's probably pretty good Motorhttp://www.hobbyking.com/hobbyking/store/__22418__NTM_Prop_Drive_Series_28_26A_1200kv_286w_AUS_Warehouse_.htmlProp8x6 prop for that motorServohttp://www.hobbyking.com/hobbyking/store/__662__HXT900_9g_1_6kg_12sec_Micro_Servo.html 3xhttp://www.hobbyking.com/hobbyking/store/__20959__30CM_Servo_Lead_Extention_JR_with_hook_26AWG_5pcs_bag_.htmlhttp://www.hobbyking.com/hobbyking/store/__9690__JR_Y_Servo_Lead_30CM_Length_5pcs_bag_.htmlESChttp://www.hobbyking.com/hobbyking/store/__13429__HobbyKing_30A_BlueSeries_Brushless_Speed_Controller.htmlRadiohttp://www.hobbyking.com/hobbyking/store/__54822__OrangeRx_T_SIX_2_4GHz_DSM2_Compatible_6CH_Transmitter_w_10_Model_Memory_and_3_Pos_Switch_Mode_2_.htmlReceiverhttp://www.hobbyking.com/hobbyking/store/__92295__OrangeRx_R610V2_DSM2_Compatible_6CH_2_4GHz_Receiver_w_CPPM.html LiPohttp://www.hobbyking.com/hobbyking/store/__8934__Turnigy_2200mAh_3S_25C_Lipo_Pack.htmlChargerhttp://www.hobbyking.com/hobbyking/store/__58457__Turnigy_Accucell_6_50W_6A_Balancer_Charger_LiHV_Capable.html?strSearch=Turnigy%20Accucell-6Power Supplyhttp://www.hobbyking.com/hobbyking/store/__25283__HobbyKing_105w_7A_Compact_Power_Supply_100v_240v_.htmlStuffhttp://www.hobbyking.com/hobbyking/store/__9572__Nylon_XT60_Connectors_Male_Female_5_pairs_GENUINE.htmlhttp://www.hobbyking.com/hobbyking/store/__76023__Turnigy_4mm_Heat_Shrink_Tube_1M_Red_.htmlhttp://www.hobbyking.com/hobbyking/store/__9572__Nylon_XT60_Connectors_Male_Female_5_pairs_GENUINE.htmlhttp://www.hobbyking.com/hobbyking/store/__68__PolyMax_3_5mm_Gold_Connectors_10_PAIRS_20PC_.htmlalso grab some 3mm prop adapters To see what I'm up to as it happens, follow me on instagram.com/sammsheperdIf you feel like it supporting:https://www.patreon.com/samm_sheperd?... for monthly supportyoutube.com/nessfultude22 has fan funding enabled on the right side of the pagePaypal email: sammshep@gmail.com
UPDATE on the Flying Chainsaw Samm Sheperd 2015-09-14 | This is an update to the longest living plane of mine yet.Here are the original video's:Narrated: youtube.com/watch?v=mk293eyL3MMFootage: youtube.com/watch?v=rwp-hrWonMg
