How To Assemble ODROID-GO Advance @odroid5

ODROID Hardkernel ODROID-GO Advance is to play 16-bit or 32-bit retro games on a handheld device with more advanced features and capabilities than ODROID-GO. Available from end of January 2020.
wiki.odroid.com/odroid_go_advance/start
forum.odroid.com/viewtopic.php?f=187&t=37202
hardkernel.com/shop/odroid-go-advance

Processor: CPU: RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz), GPU: Mali-G31 MP2
Memory: 1GB (DDR3L 786Mhz, 32 Bits bus width)
Storage: SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display: 3.5inch 320×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface)
Audio: Earphone stereo jack, Speaker 0.5Watt 8Ω mono
Battery: Li-Polymer 3.7V/3000mAh, Up to 10 hours of continuous game playing time
DC Jack: 5V input: 2.5mm diameter DC plug: USB charging cable is included in the package.
External I/O: USB 2.0 Host x 1, 10Pin IO port(I2C, GPIO, IRQ at 3.3Volt)
Input Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Analog Joystick
Power consumption: game emulation: 200~300mA, Sleep mode: 5.3~5.8mA, Power off: 0.1mA

At this moment, the trial BSP image supports the following systems.
* atari2600
* atari5200
* atari7800
* atarilynx
* gamegear
* gb
* gba
* gbc
* mastersystem
* megadrive
* nes
* pcengine
* pcenginecd
* psx
* segacd
* snes
* psp

updated 6 years ago

How To Assemble ODROID-GO Advance

ODROID Hardkernel 2020-01-02 | ODROID-GO Advance is to play 16-bit or 32-bit retro games on a handheld device with more advanced features and capabilities than ODROID-GO. Available from end of January 2020.
wiki.odroid.com/odroid_go_advance/start
forum.odroid.com/viewtopic.php?f=187&t=37202
hardkernel.com/shop/odroid-go-advance

Processor: CPU: RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz), GPU: Mali-G31 MP2
Memory: 1GB (DDR3L 786Mhz, 32 Bits bus width)
Storage: SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display: 3.5inch 320×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface)
Audio: Earphone stereo jack, Speaker 0.5Watt 8Ω mono
Battery: Li-Polymer 3.7V/3000mAh, Up to 10 hours of continuous game playing time
DC Jack: 5V input: 2.5mm diameter DC plug: USB charging cable is included in the package.
External I/O: USB 2.0 Host x 1, 10Pin IO port(I2C, GPIO, IRQ at 3.3Volt)
Input Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Analog Joystick
Power consumption: game emulation: 200~300mA, Sleep mode: 5.3~5.8mA, Power off: 0.1mA

At this moment, the trial BSP image supports the following systems.
* atari2600
* atari5200
* atari7800
* atarilynx
* gamegear
* gb
* gba
* gbc
* mastersystem
* megadrive
* nes
* pcengine
* pcenginecd
* psx
* segacd
* snes
* psp

6 Channel Stepper Motor Controller Board for M1S

ODROID Hardkernel 2023-11-14 | The Stepper Motor Controller Board is mainly designed to control up to 6 stepper motors and can help to interface with peripherals through CAN bus and several GPIO pins. Most adaptable application with this board is 3D printer or CNC machine that usually uses 3~4 stepper motors. Different type of machines require different hardware functions, unsupported function in this board could be extended when small and lower power micro controller board is connected to CAN bus or USB port if required.

On board DC step down power supply to provide 5V to ODROID-M1S
6x step motor driver module support
1x CAN-FD bus support
1x ADC channel
2x GPIO inputs
1x MOSFET output

More information : hardkernel.com

4 Channel Relay Board

ODROID Hardkernel 2023-11-14 | 4 channel relay board will provide the ability to control high voltage and high current external devices through GPIO pins easily.

Add-on board for ODROID-M1S only.
4-channel relay control via GPIO pins.
GPIO isolation using PC817 photocoupler to prevent interference from high voltage circuit.
Single RS232 serial port.
Board reset and power button pins (Optional)

more information : hardkernel.com

Realtime NPU object detecting and tracking demo using MIPI camera on ODROID-M1

ODROID Hardkernel 2023-01-13 | This project uses the Yolov5s model to recognize the cell phone and the camera tracking it. The camera and motor control used ros2 and "odroid-wiringpi". Using ROS2 and NPU together is the first time in the odroid series.

requirement:
- ubuntu 20.04
- Linux kernel 4.19
- ros2-foxy
- OpenCV (ver. 4.2 or higher)
- Source of the demo: github.com/hardkernel/ros2_yolo_tracking
- ODROID-M1: hardkernel.com/shop/odroid-m1-with-4gbyte-ram
- MIPI camera: hardkernel.com/shop/m1-mipi-csi-camera-kit
- Servos: SG90 x 2
- pan tilt braket x 1

manual:
- refer to the demo's README.md(github.com/hardkernel/ros2_yolo_tracking/blob/master/README.md)

ODROID-HC4-P KIT

ODROID Hardkernel 2022-11-16 | Consists of ODROID-HC4 board, a case made of a rigid PCB that can mount two 3.5-inch HDDs horizontally, cooling fan, cables and bolts. It's your own network storage device that you can enjoy creating yourself, and the HC4's Petitboot function and various latest OS support can be used without any changes. Please note that this product cannot mount any 2.5-inch storage device.
ODROID-HC4-P KIT : hardkernel.com/shop/odroid-hc4-p-kit
OLED+RTC for HC4-P : hardkernel.com/shop/oledrtc-for-hc4-p
HC4-P Transformation KIT : hardkernel.com/shop/hc4-p-transformation-kit

ODROID-N2L Ubuntu Gnome Desktop 22.04 + Kernel 6.0 + Panfrost + Vulkan API (4GB model)

ODROID Hardkernel 2022-11-08 | The ODROID-N2L is the low-cost variant of our most popular and powerful ARM SBC ODROID-N2+. We replaced the DDR4 RAM chips with a single LPDDR4 chip to minimize the PCB form factor and reduce power consumption. As a bonus, around 20% higher DRAM interface clock frequency is an obvious and important improvement. We could find 10% to 20% of increased system performance compared to the original N2+ in various benchmark test results.
The GPU benchmark glmark2-es2 also showed about 10% of increased performance which is very similar to the improvement of the memory bandwidth (MBW) test.
ODROID-N2L with 4GByte RAM : hardkernel.com/shop/odroid-n2l-with-4gbyte-ram
ODROID-N2L with 2GByte RAM : hardkernel.com/shop/odroid-n2l-with-2gbyte-ram
Smaller and neater form factor: 69 x 56mm
Small size allows for mounting inside a variety of small devices
Suitable for various standalone embedded system which don’t require Ethernet connectivity
Suitable for building robots, drones, arcade consoles, human-machine-interface devices, and many other applications
Faster and lower power consumption LPDDR4 RAM
Lightweight
Low cost

ODROID-N2L Kiosk Frontend package + Chromium WebGL demo (2GB model)

ODROID-H3+ Game Emulation Demo

ODROID Hardkernel 2022-10-12 | The ODROID H-series is back
It is more powerful, offers higher performance and comes in two brand new models.
ODROID-H3+ : hardkernel.com/shop/odroid-h3-plus
ODROID-H3 : hardkernel.com/shop/odroid-h3

Intel® Quad-Core Processor Jasper Lake N5105(H3+: N6005) has a base clock of 2GHz and a boost clock of 2.9GHz (H3+: 3.3GHz) with 1.5 MB L2 and 4 MB L3 cache by a 10 nm process.
Up to 64GB Dual-channel Memory DDR4 PC4-23400 (2933MT/s)
Two SO-DIMM slots, up to 32GB per slot
PCIe 3.0 x 4 lanes for one M.2 NVMe storage
2 x 2.5Gbit Ethernet ports
2 x SATA 3.0 ports
SSE4.2 accelerator (SMM, FPU, NX, MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, AES)
Intel UHD Graphics 24 EUs(H3+:32 EUs) Turbo 800MHz(H3+:900MHz)
HDMI 2.0 and DP 1.2 multiple video outputs
A configurable Unlimited Performance mode allowing the CPU to run in sustained turbo boost mode.

ODROID-H3 Case Type 1

ODROID Hardkernel 2022-10-12 | No Net card and space for 2 x 3.5” SATA drives.
Buy Now : hardkernel.com/shop/odroid-h3-case-type-1
ODROID-H3+ : hardkernel.com/shop/odroid-h3-plus
ODROID-H3 : hardkernel.com/shop/odroid-h3

Package contents:
A. Cooling fan panel
B. Side panel
C. Top panel
D. Side lock piece
E. Rear panel
F. Front panel
G. 1 x 92x92x25mm DC 5V Cooling Fan
H. 1 x 92mm Stainless Cooling Fan Grill
I. 4 x 40mm (F) PCB Supports
J. 4 x 10mm (M) PCB Supports
K. 4 x 6mm M3 Truss Head Bolts
L. 8 x 10mm #6-32 Round Head Screws
M. 4 x M5 PC Fan Screws

ODROID-H3 Case Type 2

ODROID Hardkernel 2022-10-12 | No Net card, no space for SATA storage.
Buy Now: hardkernel.com/shop/odroid-h3-case-type-2
ODROID-H3+ : hardkernel.com/shop/odroid-h3-plus
ODROID-H3 : hardkernel.com/shop/odroid-h3

Package contents:
A. Top panel
B. Back panel
C. Front panel
D. Bottom panel
E. Left/Right panel
F. 1 x 92mm Stainless Cooling Fan Grill
G. 4 x 40mm (F) PCB Supports
H. 4 x 15mm (M) PCB Supports
I. 4 x M5 Nuts
J. 4 x Rubber Feet (Round / Clear)
K. 8 x 6mm M3 Truss Head Bolts
L. 4 x M5 Truss Head Bolts

ODROID-H3 Case Type 3

ODROID Hardkernel 2022-10-12 | No Net card and space for 2 x 2.5” SATA drives (max. 15mm thick).
Buy Now : hardkernel.com/shop/odroid-h3-case-type-3
ODROID-H3+ : hardkernel.com/shop/odroid-h3-plus
ODROID-H3 : hardkernel.com/shop/odroid-h3

Package contents:
A. Top panel
B. Rear panel
C. Front panel
D. Bottom panel
E. Inner bracket
F. 2 x 2.5” SATA HDD/SSD bracket
G. Left/Right Panel
H. 1 x 92mm Stainless Cooling Fan Grill
I. 4 x 40mm (F) PCB Supports
J. 4 x 15mm (M) PCB Supports
K. 4 x 40mm (M) PCB Supports
L. 16 x 6mm M3 Truss Head Bolts
M. 4 x Rubber Feet (Round / Clear)
N. 4 x M5 Nuts
O. 4 x M5 Truss Head Bolts

ODROID-H3 Case Type 4

ODROID Hardkernel 2022-10-12 | No Net card and space for 1 x 3.5” SATA drive or 2 x 2.5” SATA drives.
Buy Now : hardkernel.com/shop/odroid-h3-case-type-4
ODROID-H3+ : hardkernel.com/shop/odroid-h3-plus
ODROID-H3 : hardkernel.com/shop/odroid-h3

Package contents:
A. Top panel
B. Rear-top panel
C. Rear panel
D. Front panel
E. Rear-back panel
F. Bottom panel
G. Front space filler
H. 2.5”/3.5” inner drive bracket
I. Left/Right panel
J. 92mm stainless cooling fan grill for front/Rear-top
K. 6 x 40mm (F) PCB Supports
L. 4 x 15mm (M) PCB Supports
M. 3 x 40mm (M) PCB Supports
N. 4 x Rubber Feet (Round / Clear)
O.4 x 6mm #6-32 Round Head Screws
P. 16 x 6mm Truss Head Bolts
Q. 8 x M5 Nuts
R. 8 x M5 Truss Head Bolts

ODROID-H3 Case Type 5

ODROID Hardkernel 2022-10-12 | Space for Net card and 2 x 3.5” SATA drives.
Buy Now : hardkernel.com/shop/odroid-h3-case-type-5
ODROID-H3+ : hardkernel.com/shop/odroid-h3-plus
ODROID-H3 : hardkernel.com/shop/odroid-h3
Net Card : hardkernel.com/shop/h2-net-card

Package contents:
A. Cooling fan panel
B. Side panel
C. Top panel
D. Side lock piece
E. Rear panel
F. Front panel
G. 1 x 92x92x25mm DC 5V Cooling Fan
H. 1 x 92mm Stainless Cooling Fan Grill
I. 2 x 40mm (F/F) PCB Supports
J. 2 x 40mm (M/F) PCB Supports
K. 2 x 40mm (F/F) PCB Supports
L. 4 x M5 PC Fan Screws
M. 8 x 10mm #6-32 Round Head Screws
N. 4 x 6mm M3 Truss Head Bolts

ODROID-H3 Case Type 6

ODROID Hardkernel 2022-10-12 | Space for Net card, no space for SATA storage.
Buy Now : hardkernel.com/shop/odroid-h3-case-type-6
ODROID-H3+ : hardkernel.com/shop/odroid-h3-plus
ODROID-H3 : hardkernel.com/shop/odroid-h3
Net Card : hardkernel.com/shop/h2-net-card

Package contents:
A. Top panel
B. Bottom panel
C. Front panel
D. Back panel
E. Left/Right panel
F. 1 x 92mm Stainless Cooling Fan Grill
G. 4 x 40mm (F) PCB Supports
H. 4 x 20mm (M) PCB Supports
I. 2 x 16x9mm (M) Steel PCB Supports
J. 4 x M5 Truss Head Bolts
K. 2 x 16x9mm (M) Steel PCB Supports
L. 8 x 6mm M3 Truss Head Bolts
M. 4 x Rubber Feet (Round / Clear)

ODROID-H3 Case Type 7

ODROID Hardkernel 2022-10-12 | Space for Net card and 2 x 2.5” SATA drives (max. 15mm thick).
Buy Now : hardkernel.com/shop/odroid-h3-case-type-7
ODROID-H3+ : hardkernel.com/shop/odroid-h3-plus
ODROID-H3 : hardkernel.com/shop/odroid-h3
Net Card : hardkernel.com/shop/h2-net-card

Package contents:
A. Top panel
B. Rear panel
C. Front panel
D. Bottom panel
E. Inner bracket
F. 2 x 2.5" SATA HDD/SSD bracket
G. Left/Right Panel
H. 1 x 92mm Stainless Cooling Fan Grill
I. 4 x 40mm (F) PCB Supports
J. 4 x 40mm (M) PCB Supports
K. 4 x 20mm (M) PCB Supports
L. 2 x 16x9mm (M) Steel PCB Supports
M. 16 x 6mm M3 Truss Head Bolts
N. 4 x M5 Truss Head Bolts
O. 4 x M5 Nuts
P. 4 x Rubber Feet (Round / Clear)

ODROID-M1 realtime NPU object detection demo

ODROID Hardkernel 2022-04-21 | Realtime NPU object detection demo using MIPI camera (OV5647) on ODROID-M1
- Linux kernel (4.19)
- Ubuntu Gnome Desktop (Mali GPU Bifrost/Wayland)
- 8~13 FPS
Object detection of image file
- Resolution of input source is limited to 640x640
- Image processing by OpenCV
- Supporting 80 objects using "YOLOv5s" model
Buy Now : hardkernel.com
Forum : forum.odroid.com

Source
Supported objects using "YOLOv5s" model: github.com/hardkernel/rknpu2/blob/master/examples/rknn_cam_demo/model/coco_80_labels_list.txt
Source of demos: github.com/hardkernel/rknpu2/tree/master/examples/rknn_cam_demo github.com/hardkernel/rknpu2/tree/master/examples/rknn_yolov5_demo
Source of images:
00:51 2048x1536 flickr.com/photos/dcoetzee/3565592927
00:53 960x623 pixabay.com/ko/photos/%ec%95%a0%ec%99%84-%eb%8f%99%eb%ac%bc-%ea%b7%80%ec%97%ac%ec%9a%b4-%eb%8f%99%eb%ac%bc-3157961
00:55 1200x796 pxhere.com/en/photo/1420284
00:59 3500x2387 commons.wikimedia.org/wiki/File:Traffic_in_Brasilia_before_Brazil_%26_Chile_match_at_World_Cup_2010-06-28_1.jpg
01:02 5391x3598 commons.wikimedia.org/wiki/File:Office_rest_area_(Unsplash).jpg
01:05 960x720 pixabay.com/ko/photos/%EB%B0%94%EA%B5%AC%EB%8B%88-%EB%AA%A9%EC%9E%AC-%EA%B3%BC%EC%9D%BC-2175870
01:08 777x518 pixahive.com/photo/a-boy-playing-football-4
01:10 780x518 stockvault.net/photo/202058/baseball-player
01:14 780x673 stockvault.net/photo/204650/basketball-league
01:16 960x720 pixabay.com/ko/photos/%ec%99%80%ec%9d%b8-%ec%99%80%ec%9d%b8-%ec%9e%94-%eb%a7%88%ec%8b%9c%eb%8b%a4-%ec%9c%a0%eb%a6%ac-3832272

ODROID-M1 Dual-Display in Action!

ODROID Hardkernel 2022-03-29 | The ODROID-M1 is a single board computer with a wide range of useful peripherals developed for use in a variety of industrial applications. To achieve this goal, we have developed various hardware accessories and device driver software over the past 10 months. In addition, RK3568B2, the core brain of ODROID-M1, is considered suitable for industrial use as the SoC manufacturer (Rockchip) guarantees supply for the next 15 years.
Buy Now : hardkernel.com
Forum : forum.odroid.com

ODROID-GO Super

ODROID Hardkernel 2021-01-22 | ODROID-GO Super hardware design is upgraded version of the OGA . The LCD size changed to 5 inches with a tempered cover glass and resolution changed to 854x480 pixels. New OGS has a 4000mAh battery. You can continuously play games for several hours depending on back light brightness.
The OGS is pre-assembled in our factory instead of being a DIY assembled kit.
hardkernel.com/shop/odroid-go-super-clear-white
hardkernel.com/shop/odroid-go-super-dim-gray
forum.odroid.com/viewtopic.php?f=187&t=41283

ODROID-H2 Case Type 7

ODROID Hardkernel 2021-01-06 | This “Case Type 7” is designed for the user who needs high bandwidth network with mid-range storages. Basically, this is the fanless design and the heated air from a processor or the storages can be blow out through the 92mm cooling fan holes on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan at the hole if the decent power for the fan is supplied.
hardkernel.com/shop/odroid-h2-case-type-7

ODROID-H2 Case Type 6

ODROID Hardkernel 2021-01-06 | This “Case Type 6” is designed for the user who needs high performance network with a minimal or regular range storages. Basically, this is the fanless design and the heated air from a processor can be blow out through the 92mm cooling fan hole on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.
hardkernel.com/shop/odroid-h2-case-type-6

ODROID-H2 Case Type5

ODROID Hardkernel 2020-12-04 | We have a new case for ODROID-H2 series. It will be available from mid December.
hardkernel.com/shop/odroid-h2plus

ODROID-N2+ Ubuntu 20.04 Gnome Desktop

ODROID Hardkernel 2020-07-15 | High performance single board computer ODROID-N2+
2.4Ghz ARM Cortex-A73 CPU. The main CPU is based on big.Little architecture which integrates a quad-core ARM Cortex-A73 CPU cluster and a dual core Cortex-A53 cluster with a new generation Mali-G52 GPU.
ODROID-N2+ with 4GByte RAM : hardkernel.com/shop/odroid-n2-with-4gbyte-ram-2
ODROID-N2+ with 2GByte RAM: hardkernel.com/shop/odroid-n2-with-2gbyte-ram-2
Forum : forum.odroid.com/index.php
WiKi : wiki.odroid.com

Dolphin Emulator Test On ODROID N2+ Android Vulkan Driver

ODROID Hardkernel 2020-07-15 | High performance single board computer ODROID-N2+
2.4Ghz ARM Cortex-A73 CPU and Vulkan powered Mali G52 GPU
Running Dolphin emulator on Android Pie full 64bit OS.
It is still far from the perfection, but the average frame rate is about 22~25FPS and many GC games are quite playable.
To enjoy the retro games with more fun, we’ve used an old tube TV with a CVBS analog video output on ODROID-N2+.
ODROID-N2+ with 4GByte RAM : hardkernel.com/shop/odroid-n2-with-4gbyte-ram-2
ODROID-N2+ with 2GByte RAM : hardkernel.com/shop/odroid-n2-with-2gbyte-ram-2
Forum : forum.odroid.com/index.php
WiKi : wiki.odroid.com

How To Assemble ODROID-GO Advance Black Edition

ODROID Hardkernel 2020-05-21 | ODROID-GO Advance Black Edition has a modern 64bit ARM low-power quad-core processor as well as wide-viewing-angle 3.5inch LCD.
There are big improvements from this revision.
- The power input port has changed to a USB Type-C connector.
- A 802.11n SDIO WiFi module has been mounted on the PCB by default.
- L2 and R2 shoulder buttons added.
- A new shell case color is available.
- The color of the PCB also changed to black from white.

How To Disassemble ODROIOD-GO Advance Black Edition

ODROID Hardkernel 2020-05-21 | How To Assemble ODROIOD-GO Advance Black Edition : youtube.com/watch?v=V2_4llLPc_g&feature=youtu.be

ODROID-C4 Ubuntu minimal + Flutter UI framework for Home Automation

ODROID Hardkernel 2020-04-23 | ODROID-C4 is a new generation single board computer that is more energy efficient and faster performing than ODROID-C2 which was introduced over four years ago as the world’s first affordable ARM 64bit computer.
The main CPU of the ODROID-C4 is built with a quad-core Cortex-A55 cluster with a new generation Mali-G31 GPU. The A55 cores run at 2.0Ghz without thermal throttling using the stock heat sink allowing a robust and quiet computer. The CPU multi-core performance is around 40% faster, and the system DRAM performance is 50% faster than the ODROID-C2.
ODROID-C4 : hardkernel.com/shop/odroid-c4
Technical information at WiKi : wiki.odroid.com/odroid-c4/odroid-c4
Forum : forum.odroid.com/index.php

ODROID-C4 Ubuntu 20.04 + Kernel 5.4 + Wayland + FireFox + WebGL

ODROID Hardkernel 2020-04-23 | Ubuntu 20.04 Focal Fossa Minimal OS image for ODROID-C4 can be downloaded from bit.ly/2Sl1g2I
ODROID-C4 is a new generation single board computer that is more energy efficient and faster performing than ODROID-C2 which was introduced over four years ago as the world's first affordable ARM 64bit computer.
The main CPU of the ODROID-C4 is built with a quad-core Cortex-A55 cluster with a new generation Mali-G31 GPU. The A55 cores run at 2.0Ghz without thermal throttling using the stock heat sink allowing a robust and quiet computer. The CPU multi-core performance is around 40% faster, and the system DRAM performance is 50% faster than the ODROID-C2.
ODROID-C4 : hardkernel.com/shop/odroid-c4
Technical information at WiKi : wiki.odroid.com/odroid-c4/odroid-c4
Forum : forum.odroid.com/index.php

ODROID-C4 CoreELEC : 4K HDR +, Netflix 1080p, 8K-25FPS video playback with downscaling

ODROID Hardkernel 2020-04-23 | ODROID-C4 is a new generation single board computer that is more energy efficient and faster performing than ODROID-C2 which was introduced over four years ago as the world's first affordable ARM 64bit computer.
The main CPU of the ODROID-C4 is built with a quad-core Cortex-A55 cluster with a new generation Mali-G31 GPU. The A55 cores run at 2.0Ghz without thermal throttling using the stock heat sink allowing a robust and quiet computer. The CPU multi-core performance is around 40% faster, and the system DRAM performance is 50% faster than the ODROID-C2.
ODROID-C4 : hardkernel.com/shop/odroid-c4
Technical information at WiKi : wiki.odroid.com/odroid-c4/odroid-c4
Forum : forum.odroid.com/index.php

ODROID-C4 Android 64bit and Vulkan GPU driver demo with PPSSPP “God of War” emulation

ODROID-C4 Android IoT programming with Android Things compatible APIs

How To Assemble ODROID-GO Advance Updated

ODROID Hardkernel 2020-02-21 | ODROID-GO Advance is to play 16-bit or 32-bit retro games on a handheld device with more advanced features and capabilities than ODROID-GO.
hardkernel.com/shop/odroid-go-advance
wiki.odroid.com/odroid_go_advance/start
forum.odroid.com/viewforum.php?f=186

Processor: CPU: RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz), GPU: Mali-G31 MP2
Memory: 1GB (DDR3L 786Mhz, 32 Bits bus width)
Storage: SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display: 3.5inch 320×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface)
Audio: Earphone stereo jack, Speaker 0.5Watt 8Ω mono
Battery: Li-Polymer 3.7V/3000mAh, Up to 10 hours of continuous game playing time
DC Jack: 5V input: 2.5mm diameter DC plug: USB charging cable is included in the package.
External I/O: USB 2.0 Host x 1, 10Pin IO port(I2C, GPIO, IRQ at 3.3Volt)
Input Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Analog Joystick
Power consumption: game emulation: 200~300mA, Sleep mode: 5.3~5.8mA, Power off: 0.1mA

At this moment, the trial BSP image supports the following systems.
* atari2600
* atari5200
* atari7800
* atarilynx
* gamegear
* gb
* gba
* gbc
* mastersystem
* megadrive
* nes
* pcengine
* pcenginecd
* psx
* segacd
* snes
* psp

ODROID-GO Advance LCD Installation Guide

ODROID Hardkernel 2020-02-19 | This video shows more detail guide to install the LCD.
Full assembly guide : youtu.be/im46rlz0Nwg
ODROID-GO Advance : hardkernel.com/shop/odroid-go-advance
ODROID Forum : forum.odroid.com/viewforum.php?f=186
ODROID WiKi : wiki.odroid.com/odroid_go_advance/start

ODROID-GO Advance Disassembly

ODROID Hardkernel 2020-02-19 | This video is to help people disassemble ODROID-GO Advance.
Please follow the instruction with special care.
ODROID-GO Advance : hardkernel.com/shop/odroid-go-advance
ODROID Forum : forum.odroid.com

Install Arduino IDE on ODROID SBCs

ODROID Hardkernel 2020-02-12 | Generally, Arduino APIs are used for microcontrollers like Arduino-UNO, esp8266, etc. Now, install Arduino IDE and some dependencies on a Odroid itself and write code. The Odroid runs the code on its own once you upload the code.
forum.odroid.com/viewtopic.php?f=180&t=37713
Github:github.com/hhk7734/oduino

ODROID-GO Advance Game Test

ODROID Hardkernel 2019-12-27 | ODROID-GO Advance is to play 16-bit or 32-bit retro games on a handheld device with more advanced features and capabilities than ODROID-GO. Available from end of January 2020.
wiki.odroid.com/odroid_go_advance/start
forum.odroid.com/viewtopic.php?f=187&t=37202
hardkernel.com/shop/odroid-go-advance

Processor: CPU: RockChip RK3326(Quad-Core ARM Cortex-A35 1.3GHz), GPU: Mali-G31 MP2
Memory: 1GB (DDR3L 786Mhz, 32 Bits bus width)
Storage: SPI Flash(16Mbytes Boot), Micro SD Card slot(UHS-1 Capable interface)
Display: 3.5inch 320×480 TFT LCD (Wide viewing angle display, MIPI-DSI interface)
Audio: Earphone stereo jack, Speaker 0.5Watt 8Ω mono
Battery: Li-Polymer 3.7V/3000mAh, Up to 10 hours of continuous game playing time
DC Jack: 5V input: 2.5mm diameter DC plug: USB charging cable is included in the package.
External I/O: USB 2.0 Host x 1, 10Pin IO port(I2C, GPIO, IRQ at 3.3Volt)
Input Buttons: F1, F2, F3, F4, F5, F6, A, B, X, Y, Direction Pad, Left Shoulder, Right Shoulder, Analog Joystick
Power consumption: game emulation: 200~300mA, Sleep mode: 5.3~5.8mA, Power off: 0.1mA

At this moment, the trial BSP image supports the following systems.
* atari2600
* atari5200
* atari7800
* atarilynx
* gamegear
* gb
* gba
* gbc
* mastersystem
* megadrive
* nes
* pcengine
* pcenginecd
* psx
* segacd
* snes
* psp

CoreELEC on ODROID-N2

ODROID Hardkernel 2019-08-21 | Collaboration with CoreELEC team have made the powerful media platform.
CoreELEC is a new generation media center OS built for the best functionality with the great output picture quality.

ODROID-N2 is a snappy AMLogic S922X device with great output picture quality.
4K HDR10 and HLG capable platforms.
Auto frame rate switching & dynamic range matching - 4K (HDR10) capable Hardware.
The best passive heatsink design we’ve ever seen.
Stable Gigabit Ethernet (1000M) is ready for reliable 7.1 HD audio - 4K HDR Bluray Rip home networked streaming.
The only Linux Kodi Leia device that outputs correct 4K HDR Infoframe data
The most powerful and affordable ARM based Linux board for 4K HDR video player, currently on the market.
4:2:2 Chroma output is ready to play

World’s best class passthrough feature including modern audio formats DTS:X and Dolby Atmos.
forum.odroid.com/viewtopic.php?f=179&t=33956&start=100#p256944

Netflix plays smoothly at a Full-HD resolution thanks to the Widevine DRM implementation.
forum.odroid.com/viewtopic.php?f=179&t=33956&start=50#p253628

3D-SBS and 3D-TAB are supported to play 3D videos

Many different type of USB DVB receivers are working out of the box thank to the backported Linux media_build drivers.

PSP & DreamCast emulation on EmuELEC Add-on (You can download a Kodi add-on for N2 board from this link)
discourse.coreelec.org/t/sx05re-retro-emulation-kodi-addon-for-coreelec-released-for-testing/3203

ODROID-N2 2GB : hardkernel.com/shop/odroid-n2-with-2gbyte-ram
ODROID-N2 4GB : hardkernel.com/shop/odroid-n2-with-4gbyte-ram
CoreELEC : discourse.coreelec.org/c/single-board-computers/odroid-n2

ODROID-N2 Running WEBGL on Chromium with Wayland

ODROID Hardkernel 2019-07-26 | Chromium package for ODROID-N2 is available now.
The files can be downloaded and installable with these commands.

$ sudo apt install git
$ git clone --depth=1 gitlab.com/tobetter/buildroot_linux_amlogic_chromium.git -b aml64_buildroot_master chromium
$ cd chromium
$ sudo ./install.sh
Launching Chromium

Once installation is done, ODROID-N2 has the files in /usr/bin/chromium-browser and /etc/init.d/chromium to launch the Chromium. The default page to load with Chromium by default can be set in another file /etc/chromium.default.

ODROID-N2 : hardkernel.com/shop/odroid-n2-with-4gbyte-ram
Wiki : wiki.odroid.com/odroid-n2/application_note/linux_drm_build#running_chromium_on_wayland
Forum : forum.odroid.com/viewforum.php?f=177

ODROID-N2

ODROID Hardkernel 2019-04-15 | ODROID-N2 is a new generation single board computer that is more powerful, more stable, and faster performing than N1.
The main CPU of the N2 is based on big.Little architecture which integrates a quad-core ARM Cortex-A73 CPU cluster and a dual core Cortex-A53 cluster with a new generation Mali-G52 GPU.
Thanks to the modern 12nm silicon technology, the A73 cores runs at 1.8Ghz without thermal throttling using the stock metal-housing heatsink allowing a robust and quiet computer.
The CPU multi-core performance is around 20% faster and the GPU is 10% faster than the N1. The N2’s DDR4 RAM is running at 1320Mhz with 1.2volt low power consumption.
The large metal housing heatsink is designed to optimize the CPU and RAM heat dissipation and minimize throttling. The CPU is placed on the bottom side of the PCB to establish great thermal characteristics.
ODROID-N2 : hardkernel.com/shop/odroid-n2-with-4gbyte-ram
ODROID forum : forum.odroid.com/viewforum.php?f=175
ODROID WiKi : wiki.odroid.com/odroid-n2/odroid-n2

VESA Mount Kit with ODROID-H2 Case Type 2

ODROID Hardkernel 2018-11-29 | This VESA kit helps to mount the ODROID-H2 enclosed with the “Case TYPE 1” to your LCD TV or LCD monitor. The “Case Type 1” and this kit can be put together with one of steel bracket using M5 bolts and nuts, it can be mounted with another bracket that is installed to VESA holes on your display device. The advantage to use this kit is that you can save lots of space on your desk.
Supported VESA holes distance: 75mm ~ 100mm
Suitable LCD TV or LCD monitor: 12” ~ 24”
Bearing weight: 10Kg
VESA Mount Kit : hardkernel.com/shop/vesa-mount-kit
ODROID-H2 Case Type 2 : hardkernel.com/shop/odroid-h2-case-type-2

I2C 20x4 LCD Module for ODROID-H2

ODROID Hardkernel 2018-11-28 | This LCD displays 20 characters wide, 4 rows in white texts on blue background.
It has a backlight, a contrast adjust potentiometer, and a simple I2C communication interface.
You can connect it to ODROID-H2 with four jumper wires directly and you will like to monitor important real-time system information from Linux OS.
SPECIFICATION
I2C Address: 0x3F or 0x27
Number of Characters: 20 characters x 4 Lines
Blue LED backlight with white font color
Adjustable contrast
Supply voltage: 3.3V
Interface: I2C 400Khz
Dot size: 0.55 x 0.55 mm
Dot pitch: 0.60 x 0.60 mm
Character size: 2.96 x 4.75 mm
Character pitch: 3.55 x 5.35 mm
Size: 98x60x22mm

This WiKi page explains how to use this LCD module with ODROID-H2.
WiKi : wiki.odroid.com/odroid-h2/application_note/20x4lcd_i2c

LED Power Button for ODROID-H2

ODROID Hardkernel 2018-11-28 | Blue illuminated Power Button with pre-assembled jumper wires.
Cable length : 260-290 mm
There is a small power switch on the ODROID-H2 board. But it is not easy to access the switch when you assemble(place?) the board in to a case. This beautifully illuminated power button is a good solution what you need!
This button can be mounted on the official acrylic case Type-1, Type-2, Type-3 and Type-4.
Note that the blue LED forward voltage must not exceed 3.5Volt.
Red wire: LED positive (Anode) : pin-4 or pin-7 or pin-14 on 20 pin header of ODROID-H2
Black wire: LED negative (Cathode) : GND(pin-1) on 20 pin header of ODROID-H2
Blue wire : Switch-A : #PWR_BTN(pin-17) in 20 pin header of ODROID-H2
Green wire : Switch-B: GND(pin-19) on 20 pin header of ODROID-H2
hardkernel.com/shop/led-power-button

ODROID-H2 Case Type 1

ODROID Hardkernel 2018-11-28 | This “Case Type 1” is designed for the user who needs high bandwidth network with the high capacity storages for the high performance computing system. One 92mm standard PC cooling fan is applied to the side of the enclosure in order to blow out the heated air from the disk drives and the ODROID-H2.

Supported storages:
On-board eMMC 5.1 module

On-board M.2 NVMe (NGFF-2280)

Up to 2 x 3.5” SATA HDD (At least 1 drive must be mounted in order to securely hold the enclosure structure)

SATA Data & Power cables must be purchased
The disk drive mounting screws (#6-32x10mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional LED Power Button (diameter: 16mm) can be installed at the front
Size : 118 (L) x 236 (W) x 132 (H) mm
hardkernel.com/shop/odroid-h2-case-1

ODROID-H2 Case Type 2

ODROID Hardkernel 2018-11-26 | This “Case Type 2” is designed for the user who needs high performance network with a minimal or regular range storages. Basically, this is the fanless design and the heated air from a processor can be blow out through the 92mm cooling fan hole on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.

Supported storages:
On-board eMMC 5.1 module

On-board M.2 NVMe (NGFF-2280)

“SATA Data and Power Cable” must be purchased
The disk drive mounting screws (M3x6mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional power on/off switch (diameter 16mm) can be installed at the front panel
128 (L) x 132 (W) x 63 (H) mm
hardkernel.com/shop/odroid-h2-case-type-2

ODROID-H2 Case Type 4

ODROID Hardkernel 2018-11-20 | This “Case Type 4” is designed for the user who needs high bandwidth network with mid-range storages. Basically, this is the fanless design and the heated air from a processor or the storages - especially a hard disk drive with a spinning motor - can be blow out through the two 92mm holes on top of the ODROID-H2 and the disk drives. But you also can install a 92x92mm standard PC cooling fan (optional) at a hole out of two on top of the ODROID-H2 if you supply the decent power for the fan.

Supported storages:
Due to the physical limitation of the design, two different size of storages cannot be installed and below combination of the storage drives are supported.
On-board eMMC 5.1 module
On-board M.2 NVMe (NGFF-2280)
Up to 1 x 3.5” SATA HDD or SSD
Up to 2 x 2.5” SATA HDD or SSD (Max height : 15mm)
“SATA Data and Power Cable” must be purchased
The disk drive mounting screws (M3x6mm and #6-32x6mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional power on/off switch (diameter 16mm) can be installed at the front
hardkernel.com/shop/odroid-h2-case-4

Optional accessory:
SATA Data and Power Cable
hardkernel.com/shop/sata-data-and-power-cable
LED Power Button
hardkernel.com/shop/led-power-button
16Port I2C GPIO Board
hardkernel.com/shop/16port-i2c-gpio-board
92x92x25mm DC 5V Cooling Fan
hardkernel.com/shop/92x92x25mm-dc-cooling-fan-w-pwm-speed-sensor-tacho

Mechanical drawings:
dn.odroid.com/temp/box/ODROID-H2_TYPE4.dxf

ODROID-H2 Case Type 3

ODROID Hardkernel 2018-11-20 | This “Case Type 3” is designed for the user who needs high bandwidth network with mid-range storages. Basically, this is the fanless design and the heated air from a processor or the storages can be blow out through the 92mm cooling fan holes on top of this enclosure. But you also can install a 92x92mm standard PC cooling fan (optional) at the hole if the decent power for the fan is supplied.

Supported storages:
On-board eMMC 5.1 module
On-board M.2 NVMe (NGFF-2280)
Up to 2 x 2.5” SATA HDD or SSD (Max height : 15mm)
“SATA Data and Power Cable” must be purchased
The disk drive mounting screws (M3x6mm) are included in the package.
The power and reset switches are accessible through the hole at the front
Optional power on/off switch (diameter 16mm) can be installed at the front
hardkernel.com/shop/odroid-h2-case-3

Optional accessory
SATA Data and Power Cable
hardkernel.com/shop/sata-data-and-power-cable
LED Power Button
hardkernel.com/shop/led-power-button
16Port I2C GPIO Board
hardkernel.com/shop/16port-i2c-gpio-board
92x92x25mm DC 5V Cooling Fan
hardkernel.com/shop/92x92x25mm-dc-cooling-fan-w-pwm-speed-sensor-tacho

Mechanical drawings:
dn.odroid.com/temp/box/ODROID-H2_TYPE3.dxf

ODROID-H2 : Ubuntu 18.10

ODROID Hardkernel 2018-10-19 | ODROID-H2 is a Linux-friendly high-end SBC with a choice of Intel’s Gemini Lake 14nm quad-core 2.4Ghz processors plus HDMI 2.0 + DP 1.2 dual display support, M.2 NVMe 4-lane PCIe, 2 x SATA III, 2 x GbE, 2 x USB 3.0, 2 x USB 2.0 and native 3.3Volt I2C/UART ports. You can install up to 32GByte DDR4 memory into two SO-DIMM memory slots.

More information : forum.odroid.com/viewtopic.php?f=29&t=32536
hardkernel.com/shop/odroid-h2

ODROID-GO fMSX port : Multiplayer over WiFi direct

ODROID Hardkernel 2018-10-05 | To celebrate ODROID’s 10th anniversary, we present the ODROID-GO Game Kit! It includes a special anniversary board with all the parts to put together your own game kit and see the workings behind such a device. It is not only a fun assembly project but also an educational tool to learn about all the hardware and software that goes into building such a device.

ODROID-GO : hardkernel.com/main/products/prdt_info.php?g_code=G152875062626
fMSX by Schuemi : github.com/Schuemi/fMSX-go
ODROID forum : forum.odroid.com/viewtopic.php?f=159&t=31927

ODROID-GO

ODROID Hardkernel 2018-06-21 | ODROID-GO : hardkernel.com/main/products/prdt_info.php?g_code=G152875062626

Assembly and learning WHY : wiki.odroid.com/odroid_go/go_assembling

Make a microSD card with your own game collections :
wiki.odroid.com/odroid_go/emulator/make_sd_for_importing_roms

To celebrate ODROID’s 10th anniversary, we present the ODROID-GO Game Kit! It includes a special anniversary board with all the parts to put together your own game kit and see the workings behind such a device. It is not only a fun assembly project but also an educational tool to learn about all the hardware and software that goes into building such a device.
Assembly and learning WHY
Have fun building your own handheld game kit while learning about the internal functions of each part and its purpose. Learn how each button is attached to a PCB switch pad, what materials are used, and how to put it all together to create a button control pad to play games! Learn how to connect power, speakers and how to download and install an OS. Learn why certain pieces are made of particular materials and why you need certain connectors. Since the device is clear, all the internal components and all the lights are visible.

PLAY GAMES
Once you have assembled the ODROID-GO, you can download and install games. Enjoy your gaming device (that you built)!

CODING CAMP
Install Arduino and learn some basic coding. We will provide online guides to code some simple, yet cool, tasks. Then, add a weather station*, learn how to check the battery life, test the speaker, add an ultrasonic distance meter* and more.
* Parts sold separately.

Beasts and Bumpkins on ODROID-XU4

ODROID Hardkernel 2017-12-13 | ODROID-XU4 : http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825
GameStation Turbo with XBMC for XU4 : wiki.odroid.com/odroid-xu4/os_images/third_party
Windows Application Compatibility List running ExaGear 2.1 Desktop : oph.mdrjr.net/meveric/other/ExaGear

Diablo on ODROID-XU4

ODROID Hardkernel 2017-11-22 | ODROID-XU4 : http://www.hardkernel.com/main/products/prdt_info.php?g_code=G143452239825
Installation Guide : magazine.odroid.com/wp-content/uploads/ODROID-Magazine-201706.pdf#page=18
Windows Application Compatibility List : oph.mdrjr.net/meveric/other/ExaGear