Reptile Dragon 2: My plans for the next INAV Build! @Painless360

Painless360 banggood.com/REPTILE-DRAGON-2-1200mm-Wingspan-Twin-Motor-Double-Tail-EPP-FPV-RC-Airplane-KIT-or-PNP-p-1805237.html?p=SA3104234824201307LG

The three videos in this 'series'
Unboxing: youtu.be/iH7dMpKbmGA (this video)
Building: youtu.be/M8lAyTZhpUU
Flying: youtu.be/tsIZkBe2qSk

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#reptile2 #painless360 #review

updated 4 months ago

Reptile Dragon 2: My plans for the next INAV Build!

Painless360 2024-06-09 | banggood.com/REPTILE-DRAGON-2-1200mm-Wingspan-Twin-Motor-Double-Tail-EPP-FPV-RC-Airplane-KIT-or-PNP-p-1805237.html?p=SA3104234824201307LG

The three videos in this 'series'
Unboxing: youtu.be/iH7dMpKbmGA (this video)
Building: youtu.be/M8lAyTZhpUU
Flying: youtu.be/tsIZkBe2qSk

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#reptile2 #painless360 #review

Why does my ExpressLRS LUA script hang?

Painless360 2024-05-07 | See all of my videos that cover ExpressLRS simply here: youtube.com/playlist?list=PLYsWjANuAm4pbswfytdLD8MSjaX8YHfN1

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#ExpressLRS #ELRS #setup

Add your logo to the OSD! New tool from Sneaky_FPV just released!

Painless360 2024-05-06 | sites.google.com/view/sneaky-fpv/home
Font packing tool video: youtu.be/9mP95BR80ls?si=nsMjkINpb-lz9612

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

NEW Compact Pan and Tilt 3-Axis G-port Gimbal-for DJI O3/Walksnail Cameras

Painless360 2024-05-05 | store.hequavtech.com/products/g-port-gimbal-for-dji-o3camera-caddx-camera?variant=48036409311543
banggood.com/HEQ-Gimbal-G-port-Compatible-with-DJI-O3-Air-Unit-or-WalkSnail-CADDX-Support-Sbus-Pwm-Mavlink-for-RC-Airplane-Fixed-Wing-FPV-Racing-Drone-p-2011673.html?p=SA3104234824201307LG

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!
#FPV #gimbal #review

The ZOHD Dart XL: How good is a 6 year old plane design now?

Painless360 2024-05-04 | KIT ONLY VERSION: banggood.com/ZOHD-Dart-XL-Extreme-1000mm-Wingspan-BEPP-FPV-Aircraft-RC-Airplane-Unassembled-KIT-Enhanced-Version-p-1949746.html?p=SA3104234824201307LG
PNP Verison: hobbyrc.co.uk/zohd-dart-xl-extreme-v2-pnp

Time Codes:
0:00 Intro
0:35 Build summary
3:28 Specs and setup summary
6:12 Flight review and scores
11:33 Summary

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

How to swap your TX16S battery to fix the date and time resetting...

Painless360 2024-05-03 | youtu.be/k6OBTQDxE6w

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

Setting up front and rear steering on the MT12/EdgeTX (Using drive modes)

Painless360 2024-04-30 | Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

Flying INAV Missions on your Quad

Painless360 2024-04-28 | Links:
github.com/iNavFlight/inav/wiki/iNavFlight-Missions for the bible on this stuff
Links to the Quad Build for Beginners series: youtube.com/playlist?list=PLYsWjANuAm4pgz-3DtfdHHKBLz23zgrSe
Links to my video on Multi-Missions for INAV: youtube.com/watch?v=J6UBai-OIYQ

Time codes:
0:00 Intro
3:19 Quad Mission Basics
11:57 How to copy the mission onto you quad
14:31 Flying the mission
16:16 Summary and pro tips

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#INAV #mission #howto

RTK GPS: Setting up an NTRIP Caster (with Ben from 3DXR)

Painless360 2024-04-27 | 3dxr.co.uk/search/emlid

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

Walksnail/Caddx GOFILM20 BNF Cine Quad

Painless360 2024-04-26 | At time of recording, the price is expected to be £399 ($189 of that will be for the the Moonlight) a link below when it is on the website!
Dump and Diff: dropbox.com/scl/fi/cx8pegsqu694sopwegwag/CaddxFPV-GOFILM20.zip?rlkey=r2jca0n980sjxcq7o6v5uiryc&dl=0

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #walksnail #review

UPDATE: VCI Dove now being supplied with metal geared servos (they listened!)

Painless360 2024-04-23 | See my original review of this model here: youtu.be/XFUVRnRLIc0
Link to it: vcihobby.com/pd.jsp?id=182
See my original overview of this model here: youtu.be/AWez0NTHVzc

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#VCIDove #painless360 #update

ZOHD Altus: Maiden flight footage and full review

Painless360 2024-04-21 | banggood.com/ZOHD-Altus-980mm-Wingspan-Twin-Motor-V-Tail-EPP-FPV-RC-Airplane-KIT-or-PNP-Reserved-VTOL-Capability-Compatible-GoPro-or-DJI-or-Runcam-HD-Action-Cameras-p-2009358.html?p=SA3104234824201307LG

Unboxing video: youtu.be/vXhzGOKf6cg
Buildout video: youtu.be/j2htdXoaSx8
Thingiverse nose design for HD FPV: thingiverse.com/thing:6577267
Fixing orphaned OSD pieces in INAV: youtube.com/watch?v=mcHmXgsnjAE

Time codes:
0:00 Intro and answering some of the questions I've had from viewers
0:55 Build summary and tips
3:37 Flying footage and review scores
10:19 Summary and final thoughts

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#zohd #altus #review

Im stopping using Alkaline AA and AAA batteries: LI-ION is here...

Painless360 2024-04-20 | xtar.cc/product/xtar-l8-charger-212.html

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#battery #LIion #review

NEW AtomRC Theer Bat Delta: An updated version of a SKYZONE classic design

Painless360 2024-04-19 | atomrc.com/products/atomrc-theer-bat-delta-high-speed-detachable-flight-wing?variant=40631805706373

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#atomrc #painless360 #firstlook

EdgeTX: Adding Background music and sounds (viewer request)

Painless360 2024-04-16 | Download Audacity from here: audacityteam.org

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#EdgeTX #painless360 #howto

How to add a Rangefinder and OPFLOW sensor to your INAV Quad (Matek 3901-LOX)

Painless360 2024-04-14 | 3dxr.co.uk/sensors-c5/lidar-range-and-flow-sensors-c4/matek-systems-optical-flow-lidar-sensor-3901-l0x-p3938

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#INAV #opflow #rangefinder

My ZOHD Altus build using SpeedyBee F405 Wing Mini and INAV V7.1

Painless360 2024-04-13 | Unboxing of the Altus: youtu.be/vXhzGOKf6cg
Full flight review here: youtu.be/2l0SBrLgIEg
SpeedyBee Wing Mini Overview: youtu.be/02he8RgRmbQ
Video showing how I calibrated the ESCs on this model: youtu.be/ySylTRgozzE
Link to the last INAV for beginners series: youtube.com/playlist?list=PLYsWjANuAm4q-i0YGMJGLOfaYIuNIYPfF
Link to the 3D design for the nose: thingiverse.com/thing:6577267

WARNING: The throws on the ailerons as supplied from the factory are very high, around 19mm travel. I would STRONGLY suggest only using between 12-15mm travel for flying unless you want very high roll rates and increased sensitivity. Rudder and elevator throws are 10mm and better suit this style of model.

banggood.com/ZOHD-Altus-980mm-Wingspan-Twin-Motor-V-Tail-EPP-FPV-RC-Airplane-KIT-or-PNP-Reserved-VTOL-Capability-Compatible-GoPro-or-DJI-or-Runcam-HD-Action-Cameras-p-2009358.html?p=SA3104234824201307LG

Time Codes:
0:00 Intro
1:28 Overview of the connections on the SpeedyBee F405 Wing Mini
6:39 INAV v7.1 setup
13:37 How I installed it all into the Altus
16:52 Build summary and plan

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

NEW ViFly Toothstor: an answer for those 2S toothpick and whoop packs

Painless360 2024-04-12 | viflydrone.com/products/vifly-toothstor-4-port-2s-balance-charger-with-storage-mode

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#vifly #batterycharger #review

How to convert the EdgeTX channel value to a PWM value (and vice-versa)

Painless360 2024-04-09 | See more tips like this here:
youtube.com/playlist?list=PLYsWjANuAm4rsouyxxD21RZ7CFcAVwRF7
youtube.com/playlist?list=PLYsWjANuAm4o0zcX7RwmJxtflFGyTKwdY

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#edgetx #painless360 #review

SpeedyBee Mario5 PRO Frame: Whats more do you get?

Painless360 2024-04-07 | speedybee.com/speedybee-mario-5-frame

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!
#speedybee #frame #review

ZOHD Altus: First look!!

Painless360 2024-04-06 | banggood.com/ZOHD-Altus-980mm-Wingspan-Twin-Motor-V-Tail-EPP-FPV-RC-Airplane-KIT-or-PNP-Reserved-VTOL-Capability-Compatible-GoPro-or-DJI-or-Runcam-HD-Action-Cameras-p-2009358.html?p=SA3104234824201307LG
Full flight review here: youtu.be/2l0SBrLgIEg
You can see how I've built out mine here: youtu.be/j2htdXoaSx8

WARNING: The throws on the ailerons as supplied from the factory are very high, around 19mm travel. I would STRONGLY suggest only using between 12-15mm travel for flying unless you want very high roll rates and increased sensitivity. Rudder and Elevator throws are 10mm and better suit this style of model

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

SkyRC BD250 Battery Discharger: A very handy piece of kit but a missed opportunity...

Painless360 2024-04-05 | banggood.com/SKYRC-BD250-250W-35A-LiPo-or-LiHV-or-NiMH-Battery-Discharger-and-Analyzer-p-1684672.html?p=SA3104234824201307LG

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#SkyRC #BD250 #discharger #review

EdgeTX Quick Tip: Offsetting a channel using a switch (viewer request)

Painless360 2024-04-02 | See more helpful videos on these kinds of radios here:
youtube.com/playlist?list=PLYsWjANuAm4rsouyxxD21RZ7CFcAVwRF7
youtube.com/playlist?list=PLYsWjANuAm4o0zcX7RwmJxtflFGyTKwdY

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#edgetx #painless360 #howto

Latest stock in at DroneAuthority

Painless360 2024-03-31 | droneauthority.co.uk
All the props: droneauthority.co.uk/search?type=product&q=props
All of the antennas: droneauthority.co.uk/search?type=product&q=antennas
All of the Speedybee products: droneauthority.co.uk/search?type=product&q=speedybee
All of the FOXEER stuff: droneauthority.co.uk/search?type=product&q=foxeer
All of the BetaFPV stuff: droneauthority.co.uk/search?type=product&q=betafpv

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#droneauthority #painless360 #stock

Why does my INAV plane/wing want to crash in MANUAL mode?

Painless360 2024-03-30 | Link to the INAV for beginners series: youtube.com/playlist?list=PLYsWjANuAm4q-i0YGMJGLOfaYIuNIYPfF
Link to the video about crashing in ANGLE or HORIZON mode: youtu.be/ILaspeI9GkU

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#INAV #painless360 #setup

A few ways to stop HD FPV overheating while waiting for a GPS lock (viewer request)

Painless360 2024-03-29 | Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

Radio Control Easter Egg Alternative Ideas

Painless360 2024-03-26 | WLTOYS 1040016/1040018
banggood.com/Wltoys-104016-104018-1-or-10-2_4G-4WD-Brushless-High-Speed-RC-Car-Vehicle-Models-55KM-or-H-p-1978935.html?p=SA3104234824201307LG

SkyRC BD250
banggood.com/SKYRC-BD250-250W-35A-LiPo-or-LiHV-or-NiMH-Battery-Discharger-and-Analyzer-p-1684672.html?p=SA3104234824201307LG

DarwinFPV Foldape4
banggood.com/DarwinFPV-FoldApe4-4-Inch-3S-Folding-Long-Range-RC-FPV-Racing-Drone-Sub250-ELRS-BNF-with-GPS-Analog-or-DJI-O3-or-NO-Camera-NO-VTX-p-2008299.html?p=SA3104234824201307LG

Speedybee frame (Mario5)
banggood.com/SpeedyBee-Mario-5-DC-or-XH-5-Inch-Frame-Kit-Support-DJI-O3-for-DIY-Freestyle-FPV-RC-Racing-Drone-p-2007801.html?p=SA3104234824201307LG

New foam faceplate for your FPV goggles
banggood.com/WLYL-FPV-Headset-Faceplate-Eye-Mask-Cotton-Pad-Anti-Light-Leak-Padding-Soft-Thin-Sponge-Pad-for-WALKSNAIL-AVATAR-HD-GOGGLES-X-p-2006544.html?p=SA3104234824201307LG

Thank you for taking the time to watch the video. You can find me on social media at
• twitter.com/painless360
• instagram.com/painless360
• thingiverse.com/painless360

You can help support the channel by simply liking the video and subscribing to the channel. It helps a lot! The links above all affiliate links. In addition you can use these links to support the time I spend helping others:
• http://www.patreon.com/painless360
• paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one person’s opinion - watch multiple 'reviews' and make your own mind up. Unlike some, I don't do this to replace a day job as that makes the creative decisions all about 'getting paid'. I am free to be completely honest and clear in the videos I make. I’m not asking vendors to pay for these videos, so opinions are mine alone.

Please also keep in mind that the comment section is not a forum: any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas, so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching! Remember to use the playlists as I collect videos into subjects to help you learn about a topic and find related information.

Please LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

Arduplane Autolanding Setup and Demo: Part 1. Setting up Arduplane and adding a rangefinder

Painless360 2024-03-24 | Link to the sensor used in the video: 3dxr.co.uk/sensors-c5/lidar-range-and-flow-sensors-c4/benewake-tfmini-plus-lidar-ip6-12m-range-p5141
Link to the HEEWING T2 used here too: 3dxr.co.uk/fixed-wing-c27/fixed-wing-kits-c105/hee-wing-t2-cruza-1-2m-wingspan-pnp-p5705

This is one of three videos on this topic:
LIDAR setup: youtu.be/rvPdyhYIMSA (this video)
Basic Autoland setup: youtu.be/4bCXH6pgXiE
Autoland with LIDAR: youtu.be/ZgZ-klaz1Tk

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

Turn the lights on your RC car on and off with your radio!

Painless360 2024-03-23 | banggood.com/Wltoys-104016-104018-1-or-10-2_4G-4WD-Brushless-High-Speed-RC-Car-Vehicle-Models-55KM-or-H-p-1978935.html?p=SA3104234824201307LG
DISCOUNT CODE: BG8e8f26
(Non-Europe price:$156.99, Europe price:$165.99, CN warehouse free shipping, Exp:3/31)

menacerc.co.uk/product/rc-switch-rcswitch

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#rccar #painless360 #setup

SEQURE ES555 and ES666 Electric Screwdrivers: whats the difference?

Painless360 2024-03-22 | ES666: sequremall.com/products/electric-screwdriver
ES555: bit.ly/48zGDoG

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#screwdriver #painless360 #review

SpeedyBee Now Making ExpressLRS Hardware! First look at their first ELRS Rx...

Painless360 2024-03-19 | speedybee.com/speedybee-nano-2-4g-expresslrs-elrs-receiver

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#speedybee #ELRS #ExpressLRS

NEW! RunCam6 a 4K30 Action Camera with HDMI and analogue out, OLED screen and EIS...

Painless360 2024-03-17 | shop.runcam.com/runcam-6
Link to the wiring of the correct USB-C cable: dropbox.com/scl/fi/93wq5tqlasxqptmx04cka/RunCam6-cable-wiring.jpg?rlkey=gkwlgwelmtx38aafpcr18oh9x&dl=0

Time codes:
0:00 Intro
headlines
4:16 Unboxing and specs
7:01 How to update
7:23 Using the menu
8:03 Using the RunCam app
11:20 Footage - EIS test
12:36 Footage 4K comparison
13:17 Summary

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#RunCam6 #camera #review

Installing a Benewake TF Mini Plus Rangefinder (for automated landings in INAV 7.1)

Painless360 2024-03-16 | 3dxr.co.uk/sensors-c5/lidar-range-and-flow-sensors-c4/benewake-tfmini-plus-lidar-ip6-12m-range-p5141
thingiverse.com/thing:6514866
Read more about the upcoming 'fixed wing landing' stuff here: github.com/Scavanger/inav/blob/73be51b3159a0f2df047f094f7d54ac0ed14f7d0/docs/Fixed%20Wing%20Landing.md

NOTE: To use the sensor in INAV (covered in the autolanding video to come), then you also need to setup a few CLI commands to set the max detectable height to use as 10m - i.e.
set nav_max_surface_altitude=1000

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#INAV #rangefinder #setup

Setting up ExpressLRS on a RC Car (using the RadioMaster MT12 and ELRS)

Painless360 2024-03-15 | banggood.com/Wltoys-104016-104018-1-or-10-2_4G-4WD-Brushless-High-Speed-RC-Car-Vehicle-Models-55KM-or-H-p-1978935.html?p=SA3104234824201307LG
DISCOUNT CODE: BG8e8f26
(Non-Europe price:$156.99, Europe price:$165.99, CN warehouse free shipping, Exp:3/31)

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

Time codes:
0:00 Intro
1:02 Outline of the process
3:25 Setting up the radio
7:14 Binding and setting fail-safe
10:19 Installing into the car
11:36 Connecting the voltage sense
14.52 Final tweaks (steering and telemetry)

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#RCCAR #ExpressLRS #setup

First look at the High Discharge HD packs from HobbyKing in the UK..

Painless360 2024-03-12 | Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#battery #lipo #firstlook

Big Boys Toys: Some of the latest things in stock at 3DXR

Painless360 2024-03-10 | You can find things on the 3DXR website by using the search function. See 3dxr.co.uk
Chargers: 3dxr.co.uk/search/chargers
Props: 3dxr.co.uk/search/propellers
Arm sets: 3dxr.co.uk/search/arm-sets

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

Why does my INAV plane keep crashing in ANGLE or HORIZON mode?

Painless360 2024-03-09 | youtube.com/playlist?list=PLYsWjANuAm4q-i0YGMJGLOfaYIuNIYPfF

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#INAV #painless360 #crash

Flywoo GOKU F722 PRO Flight Controller stacks - are they good?

Painless360 2024-03-08 | flywoo.net/products/goku-f7-mini-v2-20x20-flight-controller
flywoo.net/products/goku-f7-pro-v2-50a-bls-30x30-stack-mpu6000-
https://flywoo.tawk.help/category/product-manual/goku-stack-instructions

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#flightcontroller #flywoo #review

Change channel direction via a switch in EdgeTX (Viewer request)

Painless360 2024-03-05 | youtube.com/playlist?list=PLYsWjANuAm4rsouyxxD21RZ7CFcAVwRF7
youtube.com/playlist?list=PLYsWjANuAm4o0zcX7RwmJxtflFGyTKwdY

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#edgetx #painless360 #howto

How to simply update from INAV 6 to 7

Painless360 2024-03-03 | INAV for beginners: youtube.com/playlist?list=PLYsWjANuAm4q-i0YGMJGLOfaYIuNIYPfF
How to read a Diff All file: youtu.be/3aQNMNSAfkk
DFU mode fixing: youtu.be/oVowsO-p-LI
Hot to maiden an INAV model: youtu.be/1akmDJITU5g
Original Dart XL video from 5 years ago!: youtu.be/E9fW2u_HxJI

Time codes:
0:00 Intro and outline of the process
2:40 Demo of the update from INAV 6.1.1 to INAV 7.0
12:03 Summary

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#INAV #setup #update

WLTOYS 104016 RC Car: Here so I can answer all of the MT12 and car related questions Im getting!

Painless360 2024-03-02 | banggood.com/Wltoys-104016-104018-1-or-10-2_4G-4WD-Brushless-High-Speed-RC-Car-Vehicle-Models-55KM-or-H-p-1978935.html?p=SA3104234824201307LG
DISCOUNT CODE: BG8e8f26
(Non-Europe price:$156.99, Europe price:$165.99, CN warehouse free shipping, Exp:3/31)

You can preview the next two videos in the series here:
Swapping to an MT12 and ExpressLRS: youtu.be/OA7FozAr2S8
Making the lights controllable from the radio: youtu.be/GnjWhUWz5j8

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#WLTOYS #painless360 #rccar

How to setup uneven control throws in INAV (Viewer Request)

Painless360 2024-03-01 | Latest INAV for beginners series: youtube.com/playlist?list=PLYsWjANuAm4q-i0YGMJGLOfaYIuNIYPfF
Why you need to use MANUAL mode for this: youtu.be/OO1tIlfk9eU

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

MT12 and EdgeTX: Basic model setup (moving and adding controls and extra channels)

Painless360 2024-02-27 | Links to other videos: youtube.com/watch?v=qkcDfikR2Vo&list=PLYsWjANuAm4rsouyxxD21RZ7CFcAVwRF7
Cars and Rovers series: youtube.com/watch?v=9ovg_L2PyWE&list=PLYsWjANuAm4oHST8SGjEbE1tns12zSCVz
G.T.Power sounds setup for cars: youtu.be/-GJdd4BAfv4
How to add a tracked model setup: youtu.be/7ZDHuuFFKOQ
Throttle cut setup: youtu.be/0EA6w2XEzYA

Time codes:
0:00 intro
1:15 Control button overview
1:40 How to select a model
2:25 How to create a new model (or copy one)
4:11 Overview of the different screens (inputs, mixer, outputs etc.)
11:42 Moving channels
12:33 Adding switches to outputs
14:19 Summary

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#EdgeTX #MT12 #Howto

How to easily re-order or move quad motors in INAV (Subscriber request)

Painless360 2024-02-25 | Links to the rest of the series: youtube.com/playlist?list=PLYsWjANuAm4pgz-3DtfdHHKBLz23zgrSe

Kit used in the series:
Frame: SpeedyBee M5V2-FRAME (droneauthority.co.uk/products/speedybee-master-5-v2-frame)
FC/ESC: SpeedyBee F4-V4-55 Stack (droneauthority.co.uk/products/speedybee-f405-v4-bls-55a-30x30-fc-esc-stack)
Motors: F40 PRO 2440KV x 4 (3dxr.co.uk/multirotor-c3/multirotor-motors-c35/t-motor-f40pro-iv-motor-p4995)
Prop: Any 5150 three bladed prop (droneauthority.co.uk/products/t-motor-f5146-2pairs-bag)
Receiver: Any Micro ELRS receiver (3dxr.co.uk/radio-gear-c33/receivers-c112/matek-systems-elrs-r24-s-2-4ghz-receiver-p5143)
Walksnail unit: Any full size unit will do (droneauthority.co.uk/products/walksnail-avatar-hd-pro-kit-32gb-with-gyroflow)

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#INAV #motor #setup

HolyBro H743 Kakute Wing: A very serious Wing FC for Ardupilot and INAV

Painless360 2024-02-24 | 3dxr.co.uk/autopilots-c2/flight-controllers-c453/holybro-kakute-h743-wing-flight-controller-with-pin-header-soldered-p5700
3dxr.co.uk/autopilots-c2/flight-controllers-c453/holybro-kakute-h743-wing-flight-controller-p5699
As this has a CANBus port, I'm planning to use a CANBus GPS for an Ardupilot build:
3dxr.co.uk/autopilots-c2/fc-gps-rtk-c456/matek-systems-gnss-m10q-3100-p5614

SpeedyBee F405-wing Mini: youtu.be/02he8RgRmbQ

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#HOLYBRO #flightcontroller #overview

New Speedybee discharger is more of a power bank?

Painless360 2024-02-23 | speedybee.com/speedybee-discharger

youtu.be/02he8RgRmbQ
youtu.be/E1sbW88aBKc

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

Setting Failsafe on ExpressLRS PWM receivers (viewer request)

Painless360 2024-02-20 | See my ELRS videos here: youtube.com/playlist?list=PLYsWjANuAm4pbswfytdLD8MSjaX8YHfN1

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#ExpressLRS #ELRS #howto

Control mixing: When 50/50 doesnt work and how to fix it!

Painless360 2024-02-18 | Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#drone #painless360 #review

DarwinFPV Foldape4: A foldable pocket sized explorer!

Painless360 2024-02-17 | darwinfpv.com/products/darwinfpv-foldape4-4-inch-folding-long-range-fpv-drone

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#darwingfpv #drone #review

BetaFPV Nano v2 ELRS Module: What changed and what got improved?

Painless360 2024-02-16 | betafpv.com/collections/expresslrs-series-accessories/products/nano-tx-v2-module?sca_ref=995970.c2fShZGy68

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#ExpressLRS #ELRS #BetaFPV

NEW Speedybee F405 Wing MINI

Painless360 2024-02-12 | Link: speedybee.com/speedybee-f405-wing-mini-easy-fly (link should be live soon)

Thank you for taking the time to watch the video. You can find me on social media at twitter.com/painless360
instagram.com/painless360
thingiverse.com/painless360

R/C is one of my hobbies and I do this for fun. I don't do this to replace a day job so if you have found the content useful then and want to support the time I spend helping others and creating content then please consider liking the video and subscribing. It helps a lot!

If this video helped you and you want to support the channel you can use these links:
http://www.patreon.com/painless360
paypal.me/painless360.

Remember that reviews are subjective. Don't rely on one persons opinion - watch reviews and make your own mind up. Where-ever you can support your local R.C resellers and shops, they need your support more than ever.

If you liked this you can see more R/C related videos on the channel - youtube.com/user/Painless360, use the playlists to find entire series on topics you might find interesting.

Be aware that any comments that are rude, disrespectful or use bullying or threatening language will be deleted. Pedantry isn't encouraged either. This channel is all about helping others and passing on advice and ideas so please comment in that spirit. Comments that don't adhere to these simple rules will be deleted.

Thanks again for watching, support each other and the hobby as we have enough external drama without making more for ourselves.

LIKE and SUBSCRIBE and above all - Happy Flying!

#speedybee #flightcontroller #review