Kristian BlåsolThis is an "inbetween projects" video to just touch base on how a technique to get really high resolution "analog" signals out of Microcontrollers, in this case an Arduino, but any MCU with two or more PWM outputs can do this. So its called DualPWM and is exactly as it sounds, two pwm signals that are mixed to create one. I go through R2R again (because it matters in DualPWM), normal one channel PWM and finally DualPWM. Because it is quite a lot of theory I decided to do this in two parts, with this first part showing how it looks like and how it is "made" and in the second part how me make it useful.
(this is a reupload without the background patch playing)
How Dual PWM works. Part 1 (of 3)Kristian Blåsol2024-07-17 | This is an "inbetween projects" video to just touch base on how a technique to get really high resolution "analog" signals out of Microcontrollers, in this case an Arduino, but any MCU with two or more PWM outputs can do this. So its called DualPWM and is exactly as it sounds, two pwm signals that are mixed to create one. I go through R2R again (because it matters in DualPWM), normal one channel PWM and finally DualPWM. Because it is quite a lot of theory I decided to do this in two parts, with this first part showing how it looks like and how it is "made" and in the second part how me make it useful.
(this is a reupload without the background patch playing)
Join the discussion on the Discord server: discord.gg/pZtVheVCTWShipping issues to the USKristian Blåsol2025-08-28 | Unfortunately there is a tariff situation that prevents me and anyone from the EU from shipping to the United States.
I will keep you posted when I know I/we (Europe) can send stuff again and if it will affect prices in any way. 🤷♂️😏
Join the discussion on the Discord server: discord.gg/pZtVheVCTWA 1-20HP Generic Blind panel - Call for designers to make it nice ;) - Modular in a WeekKristian Blåsol2025-08-23 | Here is my take on a Blind panel, why make it easy and just have one size when you can do some fun stuff and make it adjustable between 1 and 20HP... :D So with some "tricks" of using the binary way of counting this blind panel can be broken into any size between 1 and 20 HP. The bits that are left over can ofcourse be used aswell... BUT it is boring, it is black with just "modular in a week" written on them. If you are a designer/artist that have an idea what it should look like, then take a look in this Dropbox folder download the material and get back to me and we will try to make it happen :) dropbox.com/scl/fo/u7lx91sxpeubpycrdlmxg/AJW0mEbQpSwN2RqAGlVRtmM?rlkey=luss0aazb6b8yd6jqj4mmfz8h&dl=0
Join the discussion on the Discord server: discord.gg/pZtVheVCTWGrenar Zener fix and Twigs firmware - Modular in a WeekKristian Blåsol2025-08-09 | In this video a short explanation about the Zener fix for the Grenar aswell which means a redesign of the pcb instead. So this also means a new build video. AND believe it or not a lower price! :D Not much but still... you got to take the small wins in this world ;)
As a side note (which is the most cool thing in the video...) someone asked on the discord if the Twigs firmware for Branches worked on the Grenar. Twigs is an independently made firmware for the Branches, which turns it into a VC factor/VC swing module instead. And it does work! The user Twig (not affiliated with Twigs firmware (I know, super confusing) helped me (again) to make this firmware work with old bootloader arduino nanos aswell, you can find the hex files for both versions on my github, but also check out the repo for Twigs here: github.com/arirusso/twigs So I also show off what this cool firmware does, and then I made a new front plate specially designed for this firmware. Because there is a lot of information changed for what the controls do. You can buy the front panel in my shop: tindie.com/products/Sourcery/grenar-a-throughhole-version-of-the-mi-branches Or download the Gerber files on my Github: github.com/SourceryOne/Grenar
I will also attend Dutch Modular Fest! Finally I get to go out there in the world and actually meet some of you :) Maybe see you there? 6 september in Rotterdam! Read more here: dutchmodularfest.com
Join the discussion on the Discord server: discord.gg/pZtVheVCTWGrenar build video (new version without the trimpots)Kristian Blåsol2025-08-05 | This is a slow as in realtime video on how to solder the Grenar, a Mutable Instruments Branches clone. This is a good companion to make sure you do everything correct and in the the right order.
Join the discussion on the Discord server: discord.gg/pZtVheVCTWProbably the most visual ADSR in the World - Modular in a WeekKristian Blåsol2025-08-01 | Some projects you just have to decide when it is "done", working with a software module this is definetely the case. So here is the MiaW ADSR. A dual ADSR in 8HP with lots of settings and features. Some listed below. It is built around an Arduino Nano, and uses Dual PWM for 16 bit resolution on the output CV signal.
0:45 Intro 8:08 Control Overview 11:24 Channel select 11:51 Act 14:58 Catch the pots 17:18 Load & Save 19:00 Shape menu 24:33 Length menu 26:34 Advanced menus (Mode and Functions) 27:08 Module Modes 29:42 Functions menu 30:15 CV Input control 32:30 End Of... 34:26 Using EndOf with CV input for some self patching. 36:55 nLoop, n, nDecay and how it works 43:10 Patch/sound examples 46:56 Final thoughts
All the schematics and programfiles is here: github.com/SourceryOne/Arduino-ADSR And if you find a bug, please report it or let me know so I can fix it :)
Two gate/trigger inputs where input 2 doubles as a CV-input.
Four backlit transparent pots that shows which phase of the envelope you are in. These are used for both channels, and also for changing parameters.
Two outputs with intenuverters, making it possible to attenuate the output signal between 0-8V or output an inverted signal between 0 and -8V.
Manual trig buttons for both channels
Four meny buttons for setting parameters.
Software features consists of:
Two independent ADSRs internally routable.
Four ways the ADSRs act on the input, Gate (ADSR), Trig (ADR), Loop (ADR Looping), and nLoop (ADR looping with a twist).
Load and Save of the state of the Module to easily continue after powering the modular down.
Shape, tune the shape of each phase of the envelope between Exponential (fast start, slow end) through Linear to Logarithmic (slow start, fast end)
Length, each pot for each phase of the envelope can be set to have a working are of either 1s, 10s or 100s (settable in software) for reeeeaaaally long envelopes.
There are also some more experimental features that works but maybe not flawlessly yet... ;) Some of them are:
Modes, for routing the ADSRs internally to outputs. eg. ADSR1 on both outputs. Input 1 triggers both ADSRs, etc etc.
CV control, makes input 2 to a CV input that can control one of the parameters of the first channel (A, D, S or R).
EO (End Of...) you can set which phase the EO on channel 1 should trigger the Envelope on channel 2.
nLoop, is a loop that either loops as long as the gate is held, or can be set to a specific number of loops (n) that it will loop.
nLoopDecay, in nLoop you can have the amplitude of the envelope to decay over time.
Join the discussion on the Discord server: discord.gg/pZtVheVCTWMiaW ADSR Build Video slow/real timeKristian Blåsol2025-08-01 | Video about this module is coming.
This is the build video for the ADSR if you bought a pcb/panel set or a complete kit from my store. A good companion to follow along with to make sure your build is correct.
Join the discussion on the Discord server: discord.gg/pZtVheVCTWWork on the #MiaW #ADSR video. And Discord helped me get the Sheep firmware working! #diymodularKristian Blåsol2025-07-23 | ...Modular jam working with my new ADSR and a beta MI Ripples clone #diymodular #modularmusic #miawKristian Blåsol2025-07-08 | ...New firmware for the SITH Sample & Hold, and progress on the ADSRKristian Blåsol2025-06-08 | This video is mostly about the new firmware for the SITH with loads of new "extra" functions. The main function of Sample or Track and Hold is the same, it is just all the "alternate" modes that is added. You can find the new firmware here: github.com/SourceryOne/Arduino-Sample-and-Hold Download the SITH folder and open the SITH.ino and all the other files should follow along, and just upload to your Arduino.
The modes are: 1. Sample or Track and Hold (S|TH) - Main function (not covered in this video) 6:11 2. Random Gates - like half a branches with only one input and one output. 7:02 3. Sample and Slide - Like S&H but instead it slides between the values. 10:26 4. LFO & Hold - An LFO with adjustable edges that you can Hold. 12:13 5. AD Envelope - A simple AD envelope generator. 13:12 6. Percussive Noise - Meant to be a hihat, but is probably more of a Snare or clap sound. Very 80's game bomb and gunshot kindof noises. With Decay and Sample Reduction. 14:50 6b. An extra "feature" is that the Percussive Noise can be used as a LoFi VCA if used with the input signal instead of internal noise, but only with Decay, and still with Sample Reduction for some gritty sounds.
Let me know if you come up with more ideas for functions that could work on this module. Either in the comments or on the discord channel. :)
Join the discussion on the Discord server: discord.gg/pZtVheVCTWPatching while rearranging/building my rack 3/3: Lydia and DorianKristian Blåsol2025-05-22 | #diymodular #modularmusic The third patch of three generative or selfplaying patches I made while also reconfiguring my Modular and making improvements to the build. The name is taken from the two Braids being quantized, one in Lydian and one in Dorian. A more slow patch than the previous two. Using about the same modules as the previous patch, adding another Braids.
The downside of just having one output from the modular into the DAW is that I cant mix the signal afterwards... The bass line is a bit too loud compared to the higher melody.
All modules except the DSP100 which is still (yes still....) a work in progress can be found in my tindie store as either a PCB-kit or a full kit. tindie.com/stores/Sourcery
Join the discussion on the Discord server: discord.gg/pZtVheVCTWPatching while rearranging/building my rack 2/3: More modules patchKristian Blåsol2025-05-18 | #diymodular #modularmusic The second of three generative or selfplaying patches I made while also reconfiguring my Modular and making improvements to the build. A simple Generative modular patch using the four modules from the previous patch, adding a few more modules, the Marbles and another VCO. The modules used are:
All modules except the DSP100 which is still (yes still....) a work in progress and the Marbles (which was a collab on the Discord server), can be found in my tindie store as either a PCB-kit or a full kit. tindie.com/stores/Sourcery
Join the discussion on the Discord server: discord.gg/pZtVheVCTWPatching while rearranging/building my rack 1/3: Four modules patchKristian Blåsol2025-05-18 | #diymodular #modularmusic One of three generative or selfplaying patches I made while also reconfiguring my Modular and making improvements to the build. A simple Generative modular patch using four modules (not counting the mixer just to pass one signal to the DAW). The modules used are:
All modules except the DSP100 which is still (yes still....) a work in progress can be found in my tindie store as either a PCB-kit or a full kit. tindie.com/stores/Sourcery
Join the discussion on the Discord server: discord.gg/pZtVheVCTWIntroducing the Linkz - a DIY throughhole version of the Mutable Instruments LinksKristian Blåsol2025-05-04 | A short video to explain the story behind the Linkz and a short a quite rushed walkthrough of the module. But it will explain what it is and what you can use it for I guess. Lots of better walk throughs out there by the people whose youtube channel is mostly that... ;) This channel is about building modules... among other things.... 😅
This is the build instructions for the Linkz, a throughhole version of Mutable Instruments Links module. The video is in "realtime" so you can build along with me in a slow pace, which takes about an hour to finish the module including testing. There are instructions for using a throughhole TL074 or for using ONE SMD component which wasnt available as a throughhole version the OPA4171.
Join the discussion on the Discord server: discord.gg/pZtVheVCTWFinally made the loop function! Now I just need to figure out all the “modes” 🤣 #diymodular #synthKristian Blåsol2025-04-23 | ...I made a mistake, sorry, but here is how to fix it.Kristian Blåsol2025-04-20 | When building the MI clones Beaks, Gris and Grenar (Peaks, Grids and Branches) I made a poor component choice. This meant that a few functions of these modules have not worked as they were supposed to. Beaks has had a negative offset of about -2V, and the Gris has had trouble getting to the lowest settings of the menu. With Grenar I managed to "fix" the problem by adding a trimpot on the back. The real culprit is a Zener diode that has the wrong characteristics, and does not work well in these modules. So in this video you will see me fix these problems, removing the old zener and replacing it with a new one. Also replacing one resistor. The part numbers of the zeners are: BZX55C3V6 for the 3.6V zener diode used in the Beaks, and BZX55C5V1 for the 5.1V zener diode used in the Gris and Grenar. Although I have not tried it on Grenar as it is working with my workaround.
Again these are free in my shop but I cant pay for shipping, but if you intend to buy anything from me, just write me a note of how many of these components to add to the package for free :)
Join the discussion on the Discord server: discord.gg/pZtVheVCTWMaking sure the Arduino ADSR doesn’t crash mid-set… #sdiy #modular #diymodularKristian Blåsol2025-03-14 | ...Arduino ADSR Part1 - Modular in a WeekKristian Blåsol2025-03-13 | Its been a long time since I released a module. This module did take more than a week to come up with... ;) Building it will be easier... This is a first video that maybe shows more my work flow from idea on paper to the prototype PCB ordered from the factory. This video has been lying on my computer a long time, so programming on the module has been going on and you might have seen some shorts showing it off... Stay tuned for part 2 to hear it in most of its glory ;)
I would love to know if there are any features I have forgotten?
Join the discussion on the Discord server: discord.gg/pZtVheVCTWTidal. My version of the mutable instruments Tides. This one is throughhole (mostly) #sdiyKristian Blåsol2025-02-20 | ...Guess I have to get a Jamuary in between the coding and testing ;) #diymodular #sdiy #jamuaryKristian Blåsol2025-01-03 | ...New firmware for the SITH s&h module. It now can do Sample and Slide! 🤩 #diymodular #sdiy #synthKristian Blåsol2025-01-02 | ...Year in Review 2024Kristian Blåsol2025-01-01 | A video of what I did (and did not accomplish) during the last year in my "modular/youtube" life :)
Join the discussion on the Discord server: discord.gg/pZtVheVCTWMutable instruments links clone with throughhole components first working test. 🙌 #sdiy diymodularKristian Blåsol2024-12-18 | ...WIP: Arduino ADSR. Got sustain and release working aswell. #diymodular #electronicsKristian Blåsol2024-11-08 | ...I got the attack and decay working. Sustain and release needs some more work. :) #sdiy #arduinoKristian Blåsol2024-11-07 | ...Work in progress: an Arduino ADSR #synth #arduino #diymodularKristian Blåsol2024-11-06 | ...Starting to code on my Arduino ADSR module. 🤞 hopefully not too many hardware misses. ;)Kristian Blåsol2024-11-05 | ...Low Pass RC-filters, from digital to analog conversion - How Dual PWM works part 3Kristian Blåsol2024-11-04 | In this final part about DualPWM and how to get a high resolution "analog" signal out from a MCU, in this case an Arduino without any fancy DAC chips I go through the LowPass RC-Filter. This simple filter is what takes the jagged pulse width square wave and converts it into steady signals. I go through the basics of the RC-filter, and then we dive a bit deeper with a dual RC-filter with amplification to get a final voltage between 0 and 10 volts with 64000-ish steps of resolution.
Here is the link to the Simulation, that also works as a schematics for making the circuit: tinyurl.com/27djczof
Join the discussion on the Discord server: discord.gg/pZtVheVCTWHow DualPWM works part 2 - How to configure faster PWM on an Arduino and resistor values.Kristian Blåsol2024-08-20 | In this video I go through TWO of the THREE steps needed to get a good 16bit "analog" output from an Arduino. It is a very theory dense video about registers and binary math. If you are interested in just how to set the registers to get faster PWM check the chapters, and the Cheat sheet. This is the second video about how DualPWM works, where the first video I showed how it works, and in this video we dive deeper into how to configure the Arduino to get a better analog signal out. We do this by speeding up the PWM frequency outside of the hearable range with register manipulation, and by tuning the resistors for the two pwm outputs so there is a good ratio between the two. In the next video I will show how to filter the signal to get the final actual analog output.
Join the discussion on the Discord server: discord.gg/pZtVheVCTWFinding cool components: clear/transparent pots. - A day in the life of a maker #synthdiy #arduinoKristian Blåsol2024-05-31 | ...I think I understand #arduino #dualpwm now. 🤞- A day in the life of a makerKristian Blåsol2024-05-29 | ...A day in the life of a maker. Making kits for the shop. #diy #tindieKristian Blåsol2024-05-28 | ...A day in the life of a maker - Sample and Slide firmware.Kristian Blåsol2024-05-26 | I programmed a new firmware for the SITH. Sample and slide anyone? 🤷♂️ #synthdiy #arduino #modularA day in the life of a maker - video research and trying to understand #dualpwm. #synthdiy #arduinoKristian Blåsol2024-05-25 | ...SITH - Sample (or) Track and Hold - Modular in a WeekKristian Blåsol2024-05-13 | Jump to the sound examples: youtu.be/BoewbbyEvRc?t=778
The third and final video about the SITH DIY Sample and Hold module. I explain the last change, and then go through the fun stuff I have figured out you can do with it. If you are interested you can find all information about it below, or buy pcbs or a whole kit in my tindiestore, also below. If you figure out some fun secondary function let me know, or even better add the code to the github. :)
Join the discussion on the Discord server: discord.gg/pZtVheVCTWControlling two alternate leds with one pin #arduinoKristian Blåsol2024-04-10 | ...Arduino Sample or Track and Hold module part 2Kristian Blåsol2024-03-10 | In this Arduino Modular in a Week-ish video I go through the next functions of the S|T&H module I am building. Here I add a switch for internal or external signal, and also get the track portion of the code to work. I also conteplate how exact the signal needs to be while being in track mode.
If you havent already you might want to check out these two videos which are important for context of this video: 10bit output: youtu.be/IoJasVtr0OA Arduino S&H part 1: youtu.be/7Mhq-GJlMeM
Support my work by becoming a Patreon: patreon.com/SourceryOneMore fun with Track&Hold. #diymodular #s&h #miaw #modularKristian Blåsol2024-03-07 | ...Progress on the Arduino S/T&H #diymodular #modularKristian Blåsol2024-03-03 | ...9 minutes of S&H from Arduino Sample & Hold prototypeKristian Blåsol2024-02-25 | I'm working on a Sample & Hold module based around an Arduino Nano. This is the first work in progress with an internal software noise source, that is then sampled and held and sent to a port maniputlation 10 bit output with an R2R "DAC" that transforms it to CV voltage. There is a max and min value knob that affects how the random notes are spread.
Join the discussion on the Discord server: discord.gg/pZtVheVCTWArduino Sample & Hold using Port Manipulation and a software noise sourceKristian Blåsol2024-02-25 | The last video with port manipulation gave me a bunch of ideas of things that would be "easy" to do with an Arduino, and the thought of a S&H came up. This video does not show the final module, but a bit of how I got here. In this video I build the framework of a sample and hold, and go through all the "features" I'd like in the module, I also code a noise source, and a software "lowpass" and "highpass" filter...
Join the discussion on the Discord server: discord.gg/pZtVheVCTWArduino 10 bit analog output using Port manipulation and R/2R ladderKristian Blåsol2024-02-09 | To use the arduino in a modular setting, a good "analog" output signal is vital. In this video I try to make a 10 bit "analog" output by using port manipulation to use 10 output pins into an R2R network, to create a much nicer signal than the 8 bit pwm signal that is called to do an analogWrite to a pin. A video with lots of tinkering and explaining concepts, and not so much modular fun ;)
Join the discussion on the Discord server: discord.gg/pZtVheVCTWJamuary 2024 - An exercise in hitting really small touch keys on a VolcaKristian Blåsol2024-01-23 | #jamuary #jamuary2024 Finally managed to get at least one Jamuari in this year :) I made a "new" filter module that gave me some inspiration and a really nice bass in this patch. The VCO is the Braids with the BOW of all voices. Filter is controlled by an ADSR from the Beaks and a slow moving LFO giving it a little bit of life. A hi hat from the second channel of the Beaks. Loads of reverb with loads of feedback, and then some melody on a detuned Volca Keys. No Bassdrum because my clock divider is not "musical" discussed in earlier videos....
Join the discussion on the Discord server: discord.gg/pZtVheVCTWStudio tour 2023, or maybe just an explanation :)Kristian Blåsol2023-12-30 | Why does my studio look just like the one I moved out of two years ago? In this video I explain the ins and outs of this studio... literally ;P Also how much components does it take to sell a few kits on Tindie?
Join the discussion on the Discord server: discord.gg/pZtVheVCTWHow to Control 16 leds with one 595 Shift Register - Anything Arduino?Kristian Blåsol2023-11-22 | A "short idea" that I had of how to control 16 leds with one 595 shift register. This might be usable in sequencer projects with little room or something like that? :) This is kindof an old Anything Arduino video, but also has some use in Modular in a Week... so... hehe, where should I put this :D
Join the discussion on the Discord server: discord.gg/pZtVheVCTWHow to upload a .HEX file to an Arduino NanoKristian Blåsol2023-11-05 | This is a quick video shoing you how to easily program an arduino with a hex file, or upload a hex file to an arduino. Works with any arduino that has a USB-port that it can communicate with a computer with. This uses the AVRDUDESS by Zak Kemble, which you can find here: blog.zakkemble.net/avrdudess-a-gui-for-avrdude
Join the discussion on the Discord server: discord.gg/pZtVheVCTWGrenar Soldering Video - Modular in a WeekKristian Blåsol2023-11-04 | This is the buildvideo for the Grenar, a Mutable Instruments Branches throughhole clone. If you want to build this, you can buy a kit here: tindie.com/stores/Sourcery Or get all the files and schematics here and source it yourself: github.com/SourceryOne/Grenar/tree/main
Join the discussion on the Discord server: discord.gg/pZtVheVCTWGrenar - A Mutable Instruments Branches Clone - Modular In A WeekKristian Blåsol2023-11-04 | Here is my take on the Mutable Instruments Branches. The Grenar is a throughhole one pcb version of the Bernoulli gate from MI. This one just as the Grids Clone "Gris" uses an Arduino Nano as the brains. I had a bunch of troubles doing this module which I will tell you all about in this video. You can find this module in my Tindie store along with previous modules: tindie.com/stores/Sourcery