seafurymikeI found very little instruction on how to use the Afro programming tool to flash BLHeli on to Afro ESC's. So once I worked it out myself I decided to create a video showing how easy it actually is to do, with the hope it helps others go out and do it themselves.
BTW: The Afro series of microprocessor chips are ATMEL based. This took me a while to find and confirm.
How to flash BLHeli on Afro 30A ESC with Afro Programming Toolseafurymike2015-02-06 | I found very little instruction on how to use the Afro programming tool to flash BLHeli on to Afro ESC's. So once I worked it out myself I decided to create a video showing how easy it actually is to do, with the hope it helps others go out and do it themselves.
BTW: The Afro series of microprocessor chips are ATMEL based. This took me a while to find and confirm.
OneShot Configuration: 1. Install Cleanflight 2. Enable Oneshot in the GUI 3. Set looptime to 1500 or belowScale PT109 with onboard head tracking cameraseafurymike2018-01-22 | I have fitted my Proboat PT109 (new old stock) with a head tracking camera to make my FPV experience "all more" real.
The system has a custom 3D printed holder which fits into the cockpit just behind the steering wheel and allows me a realistic view over the bow of the boat with about 45 degrees of head movement left and right. Panning is achieved by feeding movement inputs from my head tracking unit (Fatshark Trinity) via channel 5 to the receiver on the boat. Channel 5 has a servo connected to provide the movement.
A Runcam Split 2 system is used to provide an FPV feed via the connected 5.8Ghz Vtx to my fatshark goggles as well as a HD recording of the same feed.
Kit summary: - Proboat 40" PT109 Boat - Taranis Tx - 9 Gram servo for panning - Runcam 2 Split for FPV and HD recording - AOMWAY 5.8Ghz Vtx - Fatshark HD2 FPV Goggles - 7.2V, 5000mah NiMh batteries x 2 - 3S, 450mah LiPo for camera power - CP AntennaA Long Time Between Drinksseafurymike2017-04-25 | A short flight of my Alien 5". Getting back into the swing!Sky Dancing - My style RAWseafurymike2017-03-01 | Had a blast just kicking it around the sky. Hope you like the ride too.Choking the chickenseafurymike2017-01-28 | A couple of days of flying compiled together. I had an awesome time ripping at the trestle even if i was nervous a $%# when i flew it.
Alien 5" Kiss Flight controller Kiss 24A ESCT-Motor F40-II HS1177 FPV Cam - settings per FinalGlideAus GoPro Session 4 - 1080P @ 30FPS AOMWAY Vtx 25/200mw selectable AOMWAY 5.8Ghz 4 Clover antenna Team Blacksheep direction 5.8Ghz antenna Fatshark Dominator V3 Goggles with Fatshark Diversity Dinogy Graphene 1300mah Taranis
Music Like Apollo V-V AmsterdamFlyingCinema X24 - Hilltop Fun with the Hoods!seafurymike2016-12-04 | A really rusty flight of the X24. Good weather here now, so hope to get more flying time in. Love this new spot too.
Music Hilltop Hoods - Higher.Hawkeye Firefly 4K Camera - My Special Reviewseafurymike2016-11-09 | I bought the Firefly 4K camera. After using it i cracked the screen and it stopped working. Couldn't get it to boot, so i bought a replacement screen and tried to solder it onto the board. This is the first bad design on this unit, i mean who solders fine pins to a PCB - this makes it unserviceable.
Anyway, after stuffing around with it for 30 minutes, i got fed up and you should watch this video to see how i de-stressed and fixed the problem.Tarot 130 Mini Quadseafurymike2016-09-10 | I bought a Tarot 130 mini quad after i saw a local guy fly one. Overall the unit flies well given it has 3" props.
Pros: - Long flight times - close to 7 minutes - Easily transported - Batteries are cheap - Uses Naze32 so can load cleanflight, betaflight, etc. - Tuned quite quickly
Cons: - USB to serial drivers were a pain in the bottom to install - 520TVL Camera that came with it didn't work - Requires small control receiver (FrSKY XSR) - Post in front of port for configuration
http://www.banggood.com/FrSky-XSR-2_4GHz-16CH-ACCST-Receiver-S-Bus-CPPM-Output-Support-X9D-X9E-X9DP-X12S-X-Series-p-1031481.htmlTarot H130 CMOS cameraseafurymike2016-09-05 | This is the image provided from the camera on the tarot 130 quad. The camera is grainy and dark to the point you cant use it under FPV.20 Tonne Funseafurymike2016-04-11 | Awesome afternoon of fun around a work site with a few excavators with the tweaker.Yo man, dont break!! Mid air crash snippetseafurymike2016-03-13 | I did a naughty thing to my mates hexacopter while trying to do some close in air footage work.Weekend Funskiseafurymike2016-01-13 | Bashing the Tweaker a little over the weekend.Quick Tutorial - Manage & Configure BLHeli ESC via Cleanflight as FTDIseafurymike2016-01-11 | Have you ever wanted to manage all four of your ESC's while they are on your quad. Well, you can and by loading cleanflight or Betaflight on your Naze32, you can now select cleanflight from the BLHeli software and talk directly to each of the ESC's.
So check out my video on how this is configuredQuick Tutorial - Taranis Audio & Visual telemetry configurationseafurymike2016-01-05 | I have put together a quick overview of how to get the Taranis to display voltages and other telemetry items such as RSSI. In addition, I show you how to get audible alerts at battery voltages so you can know how your pack is in flight whilst you fly FPV with goggles.
Taranis version 2.0.17 used for this video Telemetry sent from Betaflight 2.2RC2 from Naze32
2. Softserial Telemetry: youtube.com/watch?v=wh6mpC4f144Quick Tutorial - FRSKY Telemetry - Taranis & Naze32 & D4R IIseafurymike2016-01-04 | In this tutorial I detail the how to configure FRSKY telemetry to work between a Naze32 via the D4R-II and Taranis transmitter.
When using FRSKY telemetry, the Naze32 is configured physically to use the Tx pin located next to the buzzer and battery input.
For configuration of softserial telemetry or the Taranis setup, please use the following links to my other quick tutorial video:
1. Quick Tutorial - Taranis Audio & Visual telemetry configuration - youtu.be/rOIj_sr8UgU 2. Quick Tutorial - Battery Telemetry - Softserial Configuration - youtu.be/wh6mpC4f144Quick Tutorial - Battery Telemetry - Softserial Configurationseafurymike2016-01-04 | In this tutorial I look at how to enable the softserial output for delivering telemetry to a remote control such as a Taranis. The difference with using softserial instead of FRSKY is that the output is always on (not when it's just armed) and is outputted on Pin 6 of the Naze32.
Related Videos:
1. Quick tutorial - FRSKY Telemetry - Taranis & Naze32 & D4R II - youtube.com/watch?v=UtqqbU5X9Cg 2. Quick Tutorial - Taranis Audio & Visual telemetry configuration - youtu.be/rOIj_sr8UgUQuick Tutorial - Blackbox - A reasonably tuned axisseafurymike2015-12-30 | A quick tutorial of what I am looking for in tuning my quad. In this episode I show you general characteristic of the log that shows a quad that has some good aspect of tuning and some aspects that could be improved upon.
** Don't forget, get out and fly. If your quad feels good to you, don't get bogged down in technical perfection by analysing logs to the Nth degree.Quick Tutorial - Blackbox - Good axis tuneseafurymike2015-12-30 | A quick tutorial of what I am looking for in tuning my quad. In this episode I show you general characteristic of the log that shows a quad that has good tuning characteristics.
** Don't forget, get out and fly. If your quad feels good to you, don't get bogged down in technical perfection by analysing logs to the Nth degree.Quick Tutorial - Blackbox - Overtuned axis analysisseafurymike2015-12-30 | A quick tutorial of what I am looking for in tuning my quad. In this episode I show you general characteristic of the log that shows a quad that has poor aspects of tuning and need to be improved upon.
** Don't forget, get out and fly. If your quad feels good to you, don't get bogged down in technical perfection by analysing logs to the Nth degree.Quick Tutorial - Blackbox - Undertuned axis analysisseafurymike2015-12-30 | A quick tutorial of what I am looking for in tuning my quad. In this episode I show you general characteristic of the log that shows a quad that has an undertuned axis.
** Don't forget, get out and fly. If your quad feels good to you, don't get bogged down in technical perfection by analysing logs to the Nth degree.Quick Tutorial - Betaflight Firmware Flashingseafurymike2015-12-26 | Welcome to my channel and a new series of videos that I am producing. In this "Quick Tutorial" I guide you through the process of upgrading Betaflight on a Naze 32 Rev 5 or Rev 6 flight controller.
Process: 1. Download the firmware 2. Install the firmware to the flight controller 3. Connect to the controller for configurationAvada visits Mr Gun Treeseafurymike2015-12-05 | Yep, 1Hr later and with the aid of some hardware store bought rope and hammer, we got the quad out of the tree.How to configure Blackbox on Cleanflight Betaflight Baseflight Naze32 - Part2seafurymike2015-11-02 | I made a 2 part series to detail the path to getting an external logging device to work with a Naze32 Rev5 and have the Blackbox function send flight data to it. The 2 part series also looks at post production methods of rendering the video for youtube upload.
Special thanks to TheNickDude and anyone else who helped get this up and running
FTDI Driver (fixing clones) http://electropit.com/index.php/2015/09/06/arduino-nano-v3-0-clonesHow to configure Blackbox on Cleanflight Betaflight Baseflight Naze32 - Part1seafurymike2015-11-02 | I made a 2 part series to detail the path to getting an external logging device to work with a Naze32 Rev5 and have the Blackbox function send flight data to it. The 2 part series also looks at post production methods of rendering the video for youtube upload.
Special thanks to TheNickDude and anyone else who helped get this up and running
FTDI Driver (fixing clones) http://electropit.com/index.php/2015/09/06/arduino-nano-v3-0-clonesCrash Weekend 2015seafurymike2015-09-28 | Well i had one of those weekends where everything seemed to be against me. 12 props later and a heap of crashes. Some didn't even record properly, so here is what is recorded!!DRQ250 - Lazarus - is back from the dead!seafurymike2015-09-05 | I decided to take out my DRQ250 after modding it with cleanflight, BLHeli for the ESC's, oneshot and a quick tune.
Tried to throw it around a bit and have some fun. I forgot how great this little machine was and tough.
Cleanflight 1.9 with oneshot BLHeli V14 Afro 12A ESC Naze32 1300mah Turnigy 3SIn the ACTseafurymike2015-08-31 | Got a couple of flights while in Canberra.Weekend Mish Mashseafurymike2015-08-16 | A few days of flying combined together.
- Avada R240 - DRQ250Avada 240 - Following the Markseafurymike2015-08-02 | A bit of flying and following at a local schoolAvada 240 - Pushing My Limitsseafurymike2015-07-26 | Trying to get better at acrobatics. It's a start.Avada 240 Park Gappingseafurymike2015-06-21 | Really cold morning and couldn't get my groove, thus quite a few stacks!Taranis - New how to make custom audio files methodseafurymike2015-06-15 | It seems a lot of the old ways of getting mp3 files from text to speech don't work any more. The sites have changed the screen coding and being able to simply download a mp3 file no longer exists.
I found a new method and thought it would be useful to someone.
To convert the file from mp3 to wav, so it works on the Taranis, has not changed and you should still use Audacity. I have included the settings for Audacity below for reference:
Audacity Settings: - Project Rate = 32000Hz - Export - 16bit PCM wavAvada 240 - Gapping at schoolseafurymike2015-06-14 | Confined spaces, broken props, pushing my comfort zone, what a great day. Thanks guys for a fun few hours in the dry.Avada 240 Gappingseafurymike2015-06-13 | Tried a new location and it ended up having loads of trees, so I made the most of it. loads of funCinetank Mk2 - Ghost Rooseafurymike2015-06-07 | The Albino Kangaroo is a rare occurrence.This one happens to live close to me.
As it was blowing a gale today, I decided that the Cinetank Mk2 was the only multirotor capable of handling the winds and give me great footage. I think the results speak for themself.
- Cinetank Mk2 - ImmersionRC EzUHF - 5.8Ghz FPV - GoPro Hero 4 SilverAvada 4S - Flown by SDseafurymike2015-05-09 | I could hardly keep up with the camera, but it sound like an F1 and runs like one when flown in such capable hands.Avada 240 - The Big Blueseafurymike2015-05-03 | Fun day out with the boys.
Avada 240 Quad Naze 32 - Baseflight Afro 12A SimonK 1300Mah Turnigy 3S Lipo 2.4Ghz Control 5.8Ghz Video Bullnose Props 600TVL Camera Cloverleaf Antenna's Sunnysky 2100kv MotorsAvada R240 - Country Boy Freshseafurymike2015-04-11 | Found a new great spot close to home. Open fields, loads of gapping trees and no one around for miles! What else can you ask for.
Tried some new things in this video to jazz it up a bit.
- Avada R240 Quadcopter - Taranis on 2.4Ghz - 1300mah Turnigy - Sunnysky 2100kv - Afro 12A ESC (SimonK) - 5.8Ghz Vtx - 5 x 4.5 Bullnose props - 600 TVL CCD Camera - Mobius - Naze32 with Baseflight
Music: The Lacs - Country Boy FreshAvada R240 - Bull Nose Prop Testingseafurymike2015-04-04 | Whacked some 5x4.5 Bull nose props on this beast and got a whole lot more fun from flying it.
Couple of close encounters with my mate, but no crashes. Sorry.Full Naze32 on Baseflight - Magnetometer & Barometer Setup Guideseafurymike2015-04-04 | I looked around for someone who had calibrated the magnetometer on a Naze32 in Baseflight and couldn't find anything other than some very basic literature.
So i decided to put this how too, together in the hope it helps others and gets people who have done this before to provide feedback to what I did. Good or Bad!
I'm using my Cinetank as the test bed and I have my flight modes configured as follows:
This is all useful when you put on a GPS unit. By having the MAG & BARO sorted, my understanding is that the GPS functionality will work better. Now, I did not add in the declination as this is only required for the GPS and not what I did in this video.Cinetank Mk2 Maidenseafurymike2015-03-29 | Went for a spin in my new Cinetank (Short) and what a beast. The only tuning I did with this unit is add some more Ki on the Naze board and thats it. For an out of the box unit, this rocks.
I had a blast flying it and I hope you enjoy the ride. I took it far and wide, in between some things and over a lot of trees.
Configuration: - Cinetank Mk2 short - Naze32 Flight Controller - Afro 30A ESC flashed with BLHeli - EzUHF 4 Channel Lite receiver - Taranis Controller - 600TVL CCD Camera for FPV - 1.2Ghz Wireless FPV Link - 3600mah Turnigy (30-40C) battery - GoPro 4 Silver - 9" Genfan Props - Sunnysky 2216 - 1100Kv Motors
Music: Terravita - Evan Kiljoy - ColorblindAvada R240 Scaffold Workseafurymike2015-03-22 | A bit of fun with trying to fly around some scaffolding. harder than it looks. trick is to keep up some forward speed.Squirrel 360 - new PIDsseafurymike2015-03-10 | I think these PIDs are close. Needs Kd to be dropped a bit.How to Burn (recover) a bootloader to your Martinez boardseafurymike2015-02-28 | I had an issue where the bootloader on my Martinez board got corrupted or removed, so I worked out how to connect up the USBASP programmer to my Martinez board and put the bootloader back on. This allowed me to connect my USB cable to the Martinez board and set communication back to the PC.
I hope this gets someone out of trouble. I cant imagine the amount of people who have felt they have bricked their board because they didn't know they could recover it by doing this procedure.Flight of the Gimbalsseafurymike2015-02-28 | I just loaded Alexmos 2.2.b2 onto my controllers and tuned it with the intention of getting the tilt function going, which never worked.
I think the tuning has gone well on both units, with only a touch of oscillation on a high speed descent with the Ov3rquad; - Ov3rquad Gimbal - xAircraft Minix Flight controller - DRQ500 Gimbal - Open pilot CC3D Flight controllerBLHeli Oneshot Enabled & Disabled Comparisonseafurymike2015-02-20 | I tried to put together a series of tests that would shed some light on whether one shot is the killer next thing in quads or not.
Test 1 & 2: I removed the props and read the maximum output with and without oneshot.
Test 3 & 4: No props again and this test was to try and provide some understanding if there is a difference in the throttle up and down rate between having oneshot on or off.
Test 5 & 6: To provide a relevant set of figures I added the props to the quad and measured the peak output for both scenarios. Each clip has a throttle response test tagged onto the end of the peak output tests.
Summary of results: Maximum Value Recorded Test Load Type Oneshot Voltage (V) Amperage (A) Watts
1 No Prop Disabled 12.37 2.59 32.0 2 No Prop Enabled 12.31 2.66 32.7 3 Good Response 4 Better Response - Smoother than test 3 5 With Prop Enabled 11.13 23.26 259.8 6 With Prop Disabled 24.65 11.25 277.3
Configuration of system: - DRQ250 - Sunnysky 2204 - 2300kv brushless motors - 12A Afro ESC, with BLHeli 13.0.0.1 - Naze 32 with cleanflight (oneshot capable) - 5 x 4 Gemfan props - Turnigy amperage testerDRQ250N - Oneshot on Cleanflightseafurymike2015-02-19 | A real shot video of oneshot running on cleanflight. I flashed my Afro 12amp units with BLHeli 13.0.1.
Sorry about the Jello, I was trying a new cam mount and I need to rethink how it works.
Findings: - Flight time reduced from 8 min to 5 min - Motors run hotter - Battery runs hotter - PIDs can be increased a lot more and still gives very good flight characteristics. For this alone I will persevere with oneshot. - I am finding that my top end is not as good as it used to be with simonk firmware. But this may be my issue and I may need to tweak it a bit more to get all that I can from it. - Transition through the throttle is very nice, very smooth.
Setup: - DRQ250 - Afro 12A - BLHeli 13.0.1 - Cleanflight - Naze32 - Taranis with EzUHF JR module - 1.2Ghz Video (Cloverleaf) - Attitude V2 Goggles - MobiusFlashing FrSKY D4R-II Receiver via FTDI with 27ms Firmwareseafurymike2015-02-14 | A tutorial on how to enable the D4R-II as a true 8 channel receiver by changing the 18ms framing to 27ms framing.
This tutorial uses my generic FTDI USB programming tool instead of having to go and buy the specific tool from FrSKY. Now, there is nothing wrong with the specific USB tool from FrSKY, however, as I did, I didn't know you needed one and I had a FTDI lying around. Atleast I can use my FTDI to program other boards such as the minimOSD, etc.
FT Prog Software: http://www.ftdichip.com/Support/Utilities.htm#FT_ProgOneshot - Audible enabled confirmationseafurymike2015-02-09 | The two beeps at the end of the start sequence tells you that oneshot is enabled.Cleanflight - Oneshot - Naze32: Configuration and Flyingseafurymike2015-02-07 | After flashing my ESC's with BLHeli 13.0.0.1, I added oneshot to the cleanflight configuration and reduced the looptime to 1500ms. Then i took it for a spin.
Conclusion: Oneshot on cleanflight produces a vastly different quacopter. It flies with more authority and is stable across a lot more range of flying speeds. Additionally, there is an added benefit of being able to run higher pids without the reduction in control or addition of oscillations due to pid loops being overwhelmed. All in all im looking forward to doing a load more flying with this setup.