Steve GuidiThis video is the first of a two-part series where we take a look at "BASIC Programming" for the Atari 2600 and discuss its usage, features, and limitations. I give an overview of how the cartridge presents its programming environment, how the keyboard controllers are used to input data, and demonstrate the limited memory available for authoring programs. We also take a brief look at some artwork from a 1981 Atari game catalog!
In "Part 2", we'll examine the music, keypad input, and graphics features of the language. We'll also do some real-world code optimizations to work within the memory limitations discussed in this video.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Introduction and Atari Game Catalog 1:36 My burning questions about BASIC Programming for the Atari 2600 2:58 Internet lore on the cartridge's purpose 4:14 Overview of Keyboard Controllers 7:04 Screen overview: Text quality 8:18 Screen overview: Data/Program Sections 10:40 Limitations: what to expect before writing a program 11:49 Overview of memory limitations 12:42 Program #1 - Output Memory Consumption 17:10 Program #2 - Internal Memory Consumption 24:52 Conclusion about memory use
Github for documents referenced in this video: git.io/JL5kF
Exploring BASIC Programming for the Atari 2600 - Part 1Steve Guidi2021-01-01 | This video is the first of a two-part series where we take a look at "BASIC Programming" for the Atari 2600 and discuss its usage, features, and limitations. I give an overview of how the cartridge presents its programming environment, how the keyboard controllers are used to input data, and demonstrate the limited memory available for authoring programs. We also take a brief look at some artwork from a 1981 Atari game catalog!
In "Part 2", we'll examine the music, keypad input, and graphics features of the language. We'll also do some real-world code optimizations to work within the memory limitations discussed in this video.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Introduction and Atari Game Catalog 1:36 My burning questions about BASIC Programming for the Atari 2600 2:58 Internet lore on the cartridge's purpose 4:14 Overview of Keyboard Controllers 7:04 Screen overview: Text quality 8:18 Screen overview: Data/Program Sections 10:40 Limitations: what to expect before writing a program 11:49 Overview of memory limitations 12:42 Program #1 - Output Memory Consumption 17:10 Program #2 - Internal Memory Consumption 24:52 Conclusion about memory use
Github for documents referenced in this video: git.io/JL5kF
"Building a Universal Atari 2600 12-button "Star Raiders" Controller" youtu.be/FICpISoyDAA
Program in closing comments: "Balloon Catcher" by Dave Britten https://www2.gvsu.edu/brittedg/BasicProgramming.txtHoly Stone HS175D: Teardown and RepairSteve Guidi2023-05-15 | In this video, we perform a teardown of the Holy Stone HS175D drone, its controller, and battery. The drone suffered some damage in a recent flight, which we attempt to repair while disassembling the drone. An inspection of all the interesting electronics components follows disassembly.
Please use the following time-code index to jump to relevant sections in the video.
00:00 Intro and scope 02:01 Overview of damage 03:30 Test of electronics 04:46 Removal of propellors 05:18 Removal of chassis cover 08:08 The arm locking mechanism 09:31 A closer look at damage 10:10 Drone 2.4GHz antenna 10:56 Removal of flight controller 12:03 Removal of camera and WIFI PCB 13:36 Motor arm disassembly 14:19 Inspection of electronics 19:06 Repair of damage 20:20 Close-up of electronics 21:05 Drone assembly: Caution! 22:59 Drone assembly: Surprise! 28:40 Disassembly of controller 30:52 Inspection of electronics 35:00 Close-up of electronics 35:20 Disassembly of battery 39:04 Battery charge voltage
Music: "Seven Twenty" - Diamond Ortiz "Ubiquitous" - Diamond OrtizUnderstanding and Making a Retro-Computer Multi-ROM SwitcherSteve Guidi2023-03-21 | In this video, I discuss the concept of a ROM-Switcher -- a device that lets you install an EPROM with several data/code images, and use an external switch to instruct your hardware on which ROM image to use. Such devices were common prior to cheap flash memory and are still used today in retro-computing projects.
The video covers the theory of how they work, includes the schematic of the "textbook" ROM-switching circuit, and then gives a tutorial and demo of preparing and using an EPROM with a ROM switching module in a Commodore computer.
Please use the following time-code index to jump to relevant sections in the video.
00:00 What is a ROM Switcher? 02:19 Theory: Using larger, compatible EPROMS 04:42 Theory: Access higher ROM pages 06:12 ROM switching circuit template 08:03 Applying circuit to other EPROM types 10:56 A note about pin compatibility 12:51 Overview of ROM switching module 15:21 Commodore Kernal Switching Demo Overview 16:16 Demo: Preparing EPROM image 17:52 Demo: Programming EPROM image 19:14 Demo: Switching kernals in a Commodore 16 22:08 Closing note
Atari 2600 cartridge images courtesy of Atari Age https://www.AtariAge.com
JiffyDOS ROM switcher image courtesy of Retro Innovations store.go4retro.comDIY: Black & Decker Electric Lawn Mower Blade Assembly RepairSteve Guidi2022-07-25 | In this video, I analyze and repair a problem with my electric lawnmower's blade assembly: there are two damaged parts, one of which is preventing the blade from spinning along with the motor.
Table of contents:
0:00 -- Intro and overview 0:44 -- Demonstration of problem 2:52 -- Disassembly 3:50 -- Analysis and inspection of parts 7:22 -- Assembly and test
This video was filmed outdoors and carries some unfortunate background noise that I was unable to completely remove. Furthermore, I used a faulty audio cable adapter during filming which introduced a short audio distortion in two places of speech. Another segment's audio was completely unintelligible and was replaced with a voice-over.
This video was filmed at least one year prior to publishing, and I debated not releasing it due to the above oversight and issues. In the end, I believe the information is more valuable than these problems and hope you find the content useful.
Products and components discussed in this video:
Black & Decker Electric Mower Fan, Part #241125-00 ebay.us/8Iwggi
Black & Decker Electric Mower Blade Insulator, Part #241381-01 ebay.us/e6dMRt
DIY: Black & Decker Electric Lawn Mower Switch and Power Connection Repair youtu.be/3FZkfLq7eSIConsiderations for making a Commodore 1581 Disk DriveSteve Guidi2022-06-25 | In this video, I present an overview of making a Commodore 1581 disk drive in 2022. I review the options available for controller PCBs, document costs, describe case modifications and nuances, and finally some improvements that may be made to future 1581 kits.
Please use the following time-code index to jump to relevant sections in the video.
1581 Case (Bottom) worthpoint.com/worthopedia/commodore-1581-case-5-disk-drive-64-1791517233Quick Electronics Tip: Securing Through Hole LeadsSteve Guidi2022-05-28 | In this video, I present a "quick tip" for securing through-hole leads before they are soldered to a PCB. Bending the leads a particular manner makes them stay in place for easy soldering, clean-up, and final presentation.
Music: "Know Myself" - Patrick PatrikiosQuick Electronics Tip: Make a Resistor NetworkSteve Guidi2022-05-28 | In this video, I present a "quick tip" for making a bussed resistor network. The component is assembled and soldered using an existing perf/proto-board as a guide.
Music: "Heel Flip" - Slynk & KermodeQuick Electronics Tip: Tinting Clear LEDsSteve Guidi2022-05-28 | In this video, I present a "quick tip" for adding color to clear LEDs with common markers. The color output presented in both ambient and dim lighting conditions.
Music: "Moons" - Patrick PatrikiosPreview: Portable Emulated Commodore Computer (Pi/400)Steve Guidi2022-05-26 | Quick unedited demo showing a Raspberry Pi/400 sending video to a mobile phone.
Goal: use pi/400 as an emulated C= computer, and leverage portability by outputting video to existing mobile device (phone or small tablet).
To capture the video on a mobile device, I use an inexpensive USB video-capture device and USB 2.0 OTG cable. A video capture app runs on the phone to produce the pi/400 display. Planning to produce a compilation/installation/setup tutorial for this soon :)Corel WordPerfect 9 Credits Easter EggSteve Guidi2022-02-02 | A quick demo of the "scrolling credits" easter egg featured in Corel WordPerfect 9 and Corel WordPerfect Office 2000. Also, some background information on Corel and its popular software in the 1990s. The easter egg is accessible by double-clicking the "9" in the "About WordPerfect" dialog box.
The full credits will scroll at the end of the video; please feel free to increase the playback speed as needed, and to use the timecode links below to skip to areas of interest.
0:00 Introduction 0:20 About Corel and its software 0:52 Accessing the credits easter egg 1:22 Famous name in credits? 1:52 Wordperfect Office 2000 on Linux 2:14 Complete credits and Lego scavenger hunt!
More information about Corel: corel.com en.wikipedia.org/wiki/CorelDIY: Replace the 3.5mm headset jack in an XBox One S ControllerSteve Guidi2022-01-26 | In this video, I demonstrate how to disassemble your XBox One S controller to replace a damaged 3.5mm headset jack. I give tips throughout the disassembly procedure to avoid damaging wires and clips that are encased in inside the controller.
Please feel free to use the timecode links below to skip to areas of interest.
0:00 Symptoms of fault and view of jack 1:23 Required tools 2:22 Removal of handles 4:28 Location/removal of case screws 5:29 Overview of controller interior 7:14 Removal of headset jack 10:25 Insertion of new headset jack 11:12 Insertion of new headset jack, again 12:08 Reassembly
XBox One Controller 3.5mm Headset Jack Parts: ebay.us/r1vcDk
"No Headphones" image from by Those Icons - Flaticon: flaticon.com/free-icons/no-headphonesBuilding a DB9-to-USB Retro Controller Adapter for use with EmulatorsSteve Guidi2021-11-06 | In this video, I build and demonstrate the Retronic Design Universal DB9-to-USB joystick adapter. I show schematics and walk through the build process, then test the adapter's behavior with various controller types on both the Stella (Atari 2600) and Vice (Commodore 64) emulators.
The presented PCB and adapter are based on the open-hardware specifications from Retronic Design. You may purchase a professional adaptor cable from their website at https://www.retronicdesign.com. To purchase the components and PCB demonstrated in the build/video, please see ebay.us/5KY9I4 (while supplies last).
This is a lengthy video with several tutorial sections, so please feel free to use the timecode links to skip to areas of interest.
0:00 Intro 1:13 Adapter Overview 4:49 Schematic 7:03 PCB Overview 9:26 Assembly Montage 12:24 Creating the AVR Programmer 15:47 Installing the Bootloader 17:45 Testing Joysticks with Stella and Vice 24:08 Testing Atari Keypad Controllers 25:02 Testing Paddle Controllers 26:09 Testing a Driving Controller with Stella and Vice 33:36 Testing a Wico Trackball 36:39 Troubleshooting Wico Trackball 41:09 Closing remarks and bonus enclosure!
Github for PCB Gerber files, bill of materials, and ATMega328p programming references: git.io/JXJsA
"Atari 2600 Joystick: Teardown, Contact Mod, and Cable Replacement" youtu.be/5eEmUqplm4Q
"Building a Universal Atari 2600 12-button 'Star Raiders' Controller" youtu.be/FICpISoyDAA
"Building Atari Paddles for Your Atari 2600 and Commodore Computers" youtu.be/cxAYaf03Pc8
"Building an Atari Driving Controller and playing Indy 500 on the Atari 2600" youtu.be/hTrUw8XFM50
"Joysticks In The Form of Trackballs: The Wico Command Control and the Rolkan Un-Roller Controller" 8-Bit Show And Tell youtube.com/watch?v=1yHwngHV1dY
Atari 2600 Controller Photos: Avon Fox the-liberator.netPreview: Using Commodore/Atari joysticks with your emulator #shortsSteve Guidi2021-10-10 | #Shorts #atari #commdore #c64 #arduino #retro #retrogaming
Here is a brief preview of a project I am wrapping up! I built the universal DB9-to-USB joystick adapter from the specs shared by "Retronic Design" and use it to play some games on an emulated Commodore 64. This adapter will convert the signals from just about any 9-pin/DB9 retro game controller to a USB HID-compliant game controller. In other words, it turns your old joystick or paddles into a proper USB device!
To be continued in a future video... (where we'll build the circuit, program the circuit's microcontroller, and demonstrate what the adapter can do).
[This is a test of the YouTube #short-from format for a #Short 1-min video]Unboxing: How LCSC packages a small electronics component orderSteve Guidi2021-09-26 | In this video, I show the detail and care that goes into a small electronics order from LCSC Electronics, a commercial electronics distributer located in Shenzhen China. They're not as popular as their North American counterparts, but do they have the same shipping quality bar? Let's find out!
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro and Overview
0:46 Opening the Package
2:17 Socket and IC Packaging
5:32 Loose component and connector packaging
6:46 Missing Documentation
LCSC Electronics is NOT a sponsor of this video. lcsc.com
Packaging and Documentation practices of Arrow Electronics: youtu.be/ahrbriUQyfw
Packaging and Documentation practices of Texas Instruments: youtu.be/a1NCpwDoJioDeciphering Bumblefoots Commodore 64 Music ProgramSteve Guidi2021-09-13 | Today we explore a short Commodore 64 music program shared by Ron "Bumblefoot" Thal, an accomplished musician who is associated with "Guns 'N Roses", "Sons of Apollo" and several other bands. Check out his work and credentials here:
The "Odd-Scales" program caught my attention as it was hand-written (on paper), and came with a challenge to run it to see what it does -- challenge accepted!
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro and overview 2:17 Program execution 3:21 Source code 7:31 Playing all music and crash demo 8:55 Bug fix or modification? 10:53 Program execution (unmodified)
In-video photo from ysteric, via FanArt.tv fanart.tv/artist/07b184a6-92c0-46be-8ba7-c9069d9239d6/thal-ronBuilding a Keyboard Adapter for an Atari 2600 (and writing BASIC too!)Steve Guidi2021-06-10 | In this video, I demonstrate and build a small microcontroller device that allows us to use a modern keyboard with an Atari 2600. I show schematics and walk through the build process, as well as discussing some mistakes I made during my design and build. I also give a brief overview of the firmware and present some short demos of the keyboard driving "BASIC Programming" on the Atari 2600!
During final review, I noticed some audio distortion in certain segments only when using a Bluetooth headset at a high volume. I apologize if this is irritating you, but I wasn't able to filter out the noise or identify the cause.
This is a lengthy and technical video, so please feel free to use the timecode links below to skip to areas of interest.
0:00 Intro 2:23 Keyboard controller schematic and operation 3:25 AND gate and decoder implementation 5:37 MCU-only implementation 6:46 Overview and limitations of components 12:37 Close-up view of and purpose of mini-boards 14:13 Assembly montage 18:33 Disclosure of design errors and corrections 22:17 Rationale of MCU pin selection 23:20 Assembled hardware 24:14 Firmware summary 31:00 Demo: Writing a program with a proper keyboard 33:50 Remaining issues with implementation and fixes 37:54 Closing remarks
Github for documents and source code referenced in this video: git.io/JZcZx
"Building a Universal Atari 2600 12-button 'Star Raiders' Controller" youtu.be/FICpISoyDAA
Male-Female DuPoint Cables ebay.us/dEIRJMPreview: Driving an Atari 2600 with a Modern Keyboard #shortsSteve Guidi2021-05-14 | #shorts #atari #2600 #atari2600 #arduino #retro #retrogaming
Here is a brief preview of a project I am working on! I have an Arduino hooked up to the joystick ports of an Atari 2600 and capturing the keyboard controller (a.k.a. kids controller, video touch pad) scanning events. It is producing some telemetry that gives us some insight into the scanning techniques used by the cartridge developers!
Next, the Arduino will capture signals from a proper modern keyboard and respond appropriately to the cartridge's controller scanning events. Thus, we'll be able to drive an Atari 2600 from modern keyboard and replace the archaic interface of another keyboard controller cartridge that I recently covered.
[This is a test of the #YouTubeShort short-from format for a #short 1-min video]1-min quickie: C64 BASIC and Machine Language Execution SpeedsSteve Guidi2021-04-04 | A quick and dirty demonstration of the execution speed difference between C64 interpreted BASIC and 6510 Machine Language (ML).
About 30 years ago, a friend suggested I learn ML via Jim Butterfield's popular book -- I didn't make it past the first chapter. Today I read that chapter once again and was inspired to produce this quick demo with my newfound knowledge!
I used the venerable Vice emulator and the Super Snapshot V5 ML monitor; the Vice monitor is also suitable for this demonstration. The two programs shown change the screen border color as fast as possible, cycling through all 16 colors. The modulus operation in the BASIC program is introduced for parity with the ML INC operation, which operates on bytes and wraps to zero on overflow (also the POKE operation requires inputs in the range [0,255]).
Github for source referenced in this video: git.io/JYSq6
"Machine Language for the Commodore 64, 128, and Other Commodore Computers; Revised and Expanded Edition" by Jim Butterfield (1986) archive.org/details/Machine_Language_for_the_Commodore_Revised_and_Expanded_EditionA Non-Destructive 64K RAM Upgrade for the Commodore 16 and 116Steve Guidi2021-03-22 | In this video, I give an overview a pair of PCBs that facilitate upgrading a Commodore 16 (and Commodore 116) to utilize 64KB of RAM. The PCBs are designed to fit directly into the system board without requiring a socket to act as a riser, and do not require cutting traces or lifting pins (as is commonly suggested in variants of this modification). In the last part of the video, we review why this modification is possible by studying the Commodore Plus/4 and Commodore 16 schematics.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro 0:42 Preparing for the modification 2:46 Assembly and overview of PCB 6:08 Locating CPU address lines vias 8:50 Address line header installation 10:38 DRAM module installation 11:35 Addressing PCB installation 13:35 Addressing wire installation 14:43 16KB and 64KB memory tests 16:35 How to acquire PCB/kit 17:07 Schematic overview 17:40 How the computer queries DRAM 18:17 Plus/4 schematic - Memory addressing 19:13 C16 schematic - Memory addressing 20:34 Memory module selection 22:03 Closing comments
264-series Schematics and Troubleshooting Guides from Bo Zimmerman: http://www.zimmers.net/anonftp/pub/cbm/schematics/computers/plus4/index.htmlInstalling a MOS 6510 adapter with a Commodore 16, 116, or Plus/4Steve Guidi2021-03-04 | In this video, I give a brief overview of a PCB that implements the MOS 6510/8500 CPU adapter circuit for Commodore computers that use a MOS 7501/8501 CPU (i.e. the TED or 264-series machines: Commodore 16, Commodore 116, Commodore Plus/4). This adapter circuit is designed by Andrew Challis and documented on his web site, along with its limitations. Please consider supporting Andrew's work and purchasing one from him if possible; his eBay listings and website are listed below.
If it is not feasible to purchase from Andrew directly, I have listed a small number of boards on eBay and will consider making another production order if there is enough interest. My eBay listings are linked below.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro and Overview 0:43 Where to buy the PCB 1:15 Adrian Black's DIY Solution 1:34 Board overview and header assembly 3:00 Usage of "Tape Motor" footprint 3:45 Installation in Commodore 16 4:37 Dimensions and required clearances 5:53 Closing comments
Adrian Black's video describing this project and demonstration for how to build an adapter using sockets and manual wiring.
For the power supplies shown, we discuss techiniques to identifying "fake" units as well as demonstrate how they fail when used on the boundary of their limitations.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Public service announcement 0:50 Guessing game: which PSUs are real? 4:26 How do you identify a fake PSU? 5:38 Option 1: comparing physical characteristics 8:38 Option 2: ease of access to internals 10:36 Option 3: inspection of internal components 15:51 How fake power supplies fail 18:24 A quick look at a proper PSU 21:05 Testing 2A PSUs under load 26:21 Conclusions
An electronics channel with a library of power supply analysis "Diode Gone Wild": youtube.com/c/DiodeGoneWildExploring BASIC Programming for the Atari 2600 - Part 2Steve Guidi2021-01-15 | This video is the second of a two-part series where we take a look at "BASIC Programming" for the Atari 2600 and discuss its usage, features, and limitations. In part 1 (linked below), we examine the programming environment, the keyboard controllers, and demonstrate the limited memory available for authoring programs.
In this video, we review the music, keypad input, and graphics features, as well as some debugging and code-optimizing techniques that help us work within the memory limitations of the programming environment.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Introduction 0:46 Program #1 - Playing music (NOTE function) 3:07 Program #2 - Reading keypad input (KEY function) 4:26 Program #3 - Atari Piano, race condition, and fix 8:16 Program #4 - Overview of graphics functions (HOR, VER, HIT). 9:59 Program #5 - Solitaire-Pong 13:46 Program #6 - Atari Clock 16:38 Debugging/Optimizing: - Avoiding PRINT 18:31 Debugging/Optimizing: Immediate/temporary state initialization 21:21 Debugging/Optimizing: Scope of IF statement 24:06 Conclusions
Github for documents referenced in this video: git.io/JL5kF
Program in closing comments: "Space Invaders" by Dave Britten https://www2.gvsu.edu/brittedg/BasicProgramming.txtDIY: Prevent your Philips Norelco electric shaver heads from falling out!Steve Guidi2020-11-29 | In this video I demonstrate a quick and easy fix for the Philips Norelco electric shavers/razors with pivoting heads/blades. My electric shaver head assembly is worn out and the cutting blades rarely stay in place while in use! Using super glue is an inexpensive way to rebuild the worn plastic and restore the electric shaver to usable condition.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Introduction 0:48 Problem: Worn plastic parts 2:41 Rebuilding plastic with super glue 3:57 Testing super glue fix 5:32 Testing super glue fix again
Music:
"Mr Satan" by Thomas Mogensen (DRAX) of Vibrants (1991) http://deepsid.chordian.net/?file=/MUSICIANS/D/DRAX/Mr_Satan.sidDIY: Use the hidden internal USB ports inside your computerSteve Guidi2020-10-28 | In this video, I demonstrate how to locate internally hidden and/or generally inaccessible ports on a modern computer. Using a 10th generation Intel NUC, we review the USB 2.0 pinouts for various connectors, then build an adapter cable to expose and utilize the internal USB 2.0 ports. Finally, the cable is tested with and without USB 2.0 peripherals.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro and Overview 1:58 Finding internal USB connectors in system documentation 5:50 Planning: Wiring the USB / Molex PicoBlade cable 8:00 Planning: Strain relief 9:01 Assembling the USB / Molex PicoBlade cable 10:25 Testing cable for continuity and shorts 13:08 Incorrectly connecting new cable to computer 15:42 Correctly connecting new cable to computer 18:20 Testing cable with USB peripherals
GORITE NUC Functional Lids gorite.com/intel-nuc-products/intel-nuc-replaceable-lids/intel-nuc-functional-lidsBuilding an Atari Driving Controller and playing Indy 500 on the Atari 2600Steve Guidi2020-10-06 | In this video I demonstrate how to build an Atari Driving Controller for the Atari 2600 and compatible hardware. We review the controller's schematic and how it works, assemble the components in a suitable case, then test the final product on the "Indy 500" game. The Driving Controller was released and packaged with the "Indy 500" game back in 1978, which is the only game made by Atari that requires the controller.
Note that game footage from my capture system comes from the composite output on my modified Atari 2600 Jr. There is a bit of noise and color mismatch with my composite mod, which has not been corrected at the time of filming.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro and driving controller overview 1:27 Required materials 3:24 What is a rotary encoder? 5:55 How does a rotary encoder work? 9:31 Building the controller: Preparing and drilling into project box 12:56 Building the controller: Schematic overview 14:25 Building the controller: Wiring and assembly 17:15 Testing and Indy 500 game play
Potentiometer Knob/Dial 40x19mm ebay.us/BqsdgSUnboxing: How Texas Instruments packages a small electronics component orderSteve Guidi2020-09-21 | In this video, I show the detail and care that goes into every electronics order -- large or small -- from a Texas Instruments, a commercial electronics manufacturer/distributor. This is a follow up video (linked below), comparing the packaging and documentation practices of Texas Instruments and Arrow Electronics, for somewhat comparable components. Each unique component gets its own box, and each box gets its own label. Every component is documented and checked for accuracy.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro 1:54 Unboxing the components 3:17 Component packaging and labelling 5:02 Component documentation 8:24 Actual size of components
Texas Instruments is NOT a sponsor of this video. ti.com
Unboxing: How Arrow Electronics packages a small electronics component order: youtu.be/ahrbriUQyfwUnboxing: How Arrow Electronics packages a small electronics component orderSteve Guidi2020-09-15 | In this video, I show the detail and care that goes into every electronics order -- large or small -- from Arrow Electronics, a commercial electronics distributor. Each unique component gets its own bag, and each back gets its own label. Every component is thoroughly documented and checked for accuracy.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro 1:06 Unboxing the components 2:20 Component documentation 3:59 Component packaging and labelling 6:09 Exemplary packaging! 8:00 Guarantees for components 11:10 Why all the excess packaging? 13:25 Actual size of components
Arrow Electronics is NOT a sponsor of this video. ttps://www.arrow.com2-min quickie: Connecting to a C64 BBS in 2020!Steve Guidi2020-09-06 | A quick and dirty video edit showing how to connect to a C64 BBS in September of 2020!
I used the venerable Vice C64 emulator and Jim Brain's tcpser program for Hayes Modem IO to TCP/IP telnet translation. Vice is configured via its RSR232 settings to use an IP address and port for its serial modem IO; in this case, I use 127.0.0.1:25232 (localhost) since that's the machine and port that tcpser is running on.
tcpser is configured to use a 2400 baud connection, and used SnapTerm from the Super Snapshot cartridge for the demo (quick and dirty -- no PETSCII). You can connect to any host that provides telnet as demonstrated by connecting to freechess.org.
Modern CCGMS and BBS connection info: 1200baud.wordpress.comDesoldering DIP/Through-Hole ICs With Inexpensive ToolsSteve Guidi2020-08-13 | In this video, I demonstrate my technique for safely desoldering and removing DIP/through-hole ICs using inexpensive tools: a beginner's soldering iron, an inexpensive manual solder pump, and a heat gun. Adrian Black's excellent video on a similar subject motivated me to see if this could reasonably be accomplished without a proper desoldering gun and hot-air station.
Note that I had some problems with lighting during filming and some shots went out of focus; some footage was completely unusable. I kept some footage that was out of focus as the following scene typically became in-focus and clear, showing the result of the work that was not perfectly visible. I'm still working on improving my lighting and filming tools and I appreciate your patience and understanding.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro 0:30 Adrian Black's Technique (footage used with permission) 0:59 Tools used 3:39 Priming solder joints with fresh solder 4:17 Using a multi-angle vise to work on circuit boards 5:28 Dry-run and explanation of IC desoldering technique 7:16 Desoldering IC from circuit board 12:18 First chip removal attempt and loosening pins from through-hole 14:51 Use of heat gun (with CAUTION) to liberate stubborn pins 17:51 Inspecting work for damage 18:21 Closing comments 19:13 Bonus content! Large sockets made from smaller sockets
Magnifying Lens Head Band harborfreight.com/magnifier-head-strap-with-lights-38896.html amzn.to/3fTynnk ebay.us/vYKKp2Building Atari Paddles for Your Atari 2600 and Commodore ComputersSteve Guidi2020-07-27 | In this video I demonstrate how to build a set of Paddle controllers, compatible with the Atari 2600 and several Commodore computers. We review the controller's schematic and how it works, assemble the components in a suitable case, then test the final product on some Atari 2600 games.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro and Paddle Controller Overview 1:02 Paddle-based Atari 2600 Games Demo 2:44 Required materials 4:56 Schematic and Potentiometer Overview 7:05 Preparing and Drilling into Project Box 9:29 Assembling and Wiring Paddle Components 14:53 Wiring DB9 Connector to the Paddle Cables 17:29 Final Touches and Finished Paddles 17:55 Testing and Game Play
Note that the game footage from the demo section is created using an emulator (prior to when my capture card arrived) and the game footage from the game-play section is captured using composite output from my modified Atari 2600. There is a bit of noise and color mismatch with my composite mod, which has not yet been corrected.
Thingiverse Paddle Components thingiverse.com/search?q=paddle+knob&type=things&sort=relevantBuilding a Universal Atari 2600 12-button Star Raiders ControllerSteve Guidi2020-06-12 | In this video, I demonstrate how to build a universal Video Touch Pad / Keyboard Controller / Kids Controller for the Atari 2600, and talk a little bit about "Star Raiders" -- the motivation for doing so. We review the controller's schematic and how it works, then put together a circuit board and house it in a suitable case.
Please use the following time-code index to jump to relevant sections in the video.
0:00 Intro and Overview 1:33 Equivalent Atari 2600 Controllers 2:20 How the Controller Works 6:58 Required materials 8:34 Push Button Switch Installation 11:12 Screw-down Terminal Installation 12:13 Correcting poorly-installed terminal 13:56 Creating stand-offs for project box 14:49 Switch connection - part 1 of 3 16:27 Soldering error and correction 17:32 Switch connection - part 2 of 3 18:45 Intermediate connection testing 20:10 Switch connection - part 3 of 3 22:44 Intermediate connection testing 24:27 Resistor installation 26:29 Final connection testing 27:46 Template for drilling holes 32:20 Drilling holes in project box 35:18 Labelling cable pins on board 36:37 Cable preparation and installation 39:54 Controller test and game-play
4.7k resistors amzn.to/2Sxd95P ebay.us/JoyvaYDIY: Black & Decker Electric Lawn Mower Switch and Power Connection RepairSteve Guidi2020-05-31 | In this video, I diagnose a pair of faults in my Black & Decker electric lawn mower: the primary power switch, and the receptacle that accepts AC power. The switch is disassembled and cleaned, where as the receptacle is replaced with an AC power cable.
Table of contents:
0:00 -- Intro and Overview 0:58 -- Switch disassembly 3:08 -- Switch cleaning 4:10 -- Analysis of damaged switch 6:47 -- Lawn mower schematic and magnetic braking 7:54 -- Switch reassembly 11:39 -- Switch testing 13:48 -- Lawn mower control housing reassembly and test 18:18 -- Damaged receptacle analysis and cable retrofit
Electric Lawn Mower Switch amzn.to/2XIWCgQ ebay.us/5z8FteDIY: Build a Vesa Extension Bracket to mount a Mini PC to both a Monitor and a Monitor ArmSteve Guidi2020-04-13 | In this video, I build an extension bracket for Vesa mounting versatility using a sheet of ABS plastic. The extension bracket allows me to mount my monitor to its monitor arm and a mini PC to the back of the monitor, all through their respective Vesa brackets and standard hardware.
I obtained my ABS plastic from a regional plastic shop, TAP Plastics (tapplastics.com), who often sell scrap materials by weight.Atari 2600 Joystick: Teardown, Contact Mod, and Cable ReplacementSteve Guidi2020-03-23 | In this video, I discuss the operation of the original Atari 2600 joystick and why it fails so often. I also show a common replacement of the contacts with tactile switches, demonstrate how to check your cable for faults, and how to build a replacement cable with strain relief.
I've bookmarked the relevant sections here:
0:00 -- Intro 1:05 -- Overview of construction and problems 6:13 -- Tactile switch modification 11:59 -- Cable diagnostics and replacement options 21:50 -- Reassembly
SMD Tactile Switch digikey.com/short/zjpp74 ebay.us/9Hg4HEDIY: Adding a second light bulb and improving the safety of a ceiling light fixtureSteve Guidi2020-02-29 | I demonstrate the modification a CFL-based light fixture to use two Edison-based LED light bulbs. I also add grounding to the fixture itself, in the event it ever becomes live.
Like the fixture, but don't want to modify CFL sockets? You can buy this style fixture in various formats:
Light fixture with with LED board and driver amzn.to/2PkgkMy
Kaiweets Digital Multimeter amzn.to/32mJxvyRepairing the glove box light actuator in a 2000 VW Passat SedanSteve Guidi2018-05-23 | The pivot for the lever that actuates the light in the glove box bends over time. Consequently, opening and closing the glove box may not turn the light on or off.
This video describes the mechanics of the glove box light system and shows a quick fix to deal with deformation of the pivot.
Apologies for the bad pixels from my camera's CCD, which only appear in high-ISO exposures.