Cnc machining a zundapp 5 speed engine part3 Stef van Itterzon 2023-02-19 | ----sorry the upload of this part took almost a year...-----For my next project im gone try to machine a zundapp 5 speed engine block.Last time i made a 4 speed engine the 5 speed is a little wider to house the extra gear. so the center part of the engine has some more challenges to machine. In this part im machining the clutch and ignition cover. Also i have some footage of a running engine.
Cnc machining a zundapp 5 speed engine part2 Stef van Itterzon 2022-02-26 | For my next project im gone try to machine a zundapp 5 speed engine block.Last time i made a 4 speed engine the 5 speed is a little wider to house the extra gear. so the center part of the engine has some more challenges to machine. In this part im machining the ignition carter and using the 5th axis to drill oil channels. also managed to do some real 5th axis moves.
Cnc machining a zundapp 5 speed engine part1 Stef van Itterzon 2022-02-12 | For my next project im gone try to machine a zundapp 5 speed engine block.Last time i made a 4 speed engine the 5 speed is a little wider to house the extra gear. so the center part of the engine has some more challenges to machine. That part is covert in this video part.
3+2 machining on 5th axis trunnion first real part Stef van Itterzon 2021-11-25 | 3+2 machining on 5th axis trunnion first real partIn this video i explain how i machined this battery tray on my diy 5th axis trunnion. Video ended up a little long but hope you can enjoy it.
Diy 5th axis trunnion build part7 Stef van Itterzon 2021-09-12 | Diy 5th axis trunnion build series for my epoxy granite vertrical mill.Its a B-C configuration trunnion running on Harmonic drives with delta Servo's. Raw material is weighing in 26kg. In this video I am finishing up the covers and make my own dovetail clamp to hold workpieces in the trunnion.
Diy 5th axis trunnion build part6 Stef van Itterzon 2021-07-04 | Diy 5th axis trunnion build series for my epoxy granite vertrical mill.Its a B-C configuration trunnion running on Harmonic drives with delta Servo's. Raw material is weighing in 26kg. In this video I am finishing up the trunnion mechanically and have my first 5th axis cuts.
Diy 5th axis trunnion build part5 Stef van Itterzon 2021-06-27 | Diy 5th axis trunnion build series for my epoxy granite vertrical mill.Its a B-C configuration trunnion running on Harmonic drives with delta Servo's. Raw material is weighing in 26kg. In this video I am machining the Support shaft and c axis servo housing.
Diy 5th axis trunnion build part4 Stef van Itterzon 2021-06-07 | Diy 5th axis trunnion build series for my epoxy granite vertrical mill.Its a B-C configuration trunnion running on Harmonic drives with delta Servo's. Raw material is weighing in 26kg. In this video I am machining the main body that will hold the C axis.Part 1: https://www.youtube.com/watch?v=iDlHI...Part 2: youtu.be/OU-bKb_KJBUPart 3: youtube.com/watch?v=ZgOfc6giFWU
Diy 5th axis trunnion build part3 Stef van Itterzon 2021-05-23 | Diy 5th axis trunnion build series for my epoxy granite vertrical mill.Its a B-C configuration trunnion running on Harmonic drives with delta Servo's. Raw material is weighing in 26kg. In this video I am machining the B axis servo bracked an cover.Part 1: youtube.com/watch?v=iDlHIduj06cPart 2: youtu.be/OU-bKb_KJBU
Diy 5th axis trunnion build part2 Stef van Itterzon 2021-05-15 | Diy 5th axis trunnion build series for my epoxy granite vertrical mill.Its a B-C configuration trunnion running on Harmonic drives with delta Servo's. Raw material is weighing in 26kg. In this video I am machining the 2 side plates.Part 1: youtube.com/watch?v=iDlHIduj06cpart 3: youtube.com/watch?v=ZgOfc6giFWU
Diy 5th axis trunnion build part1 Stef van Itterzon 2021-05-08 | Diy 5th axis trunnion build series for my epoxy granite vertrical mill.Its a B-C configuration trunnion running on Harmonic drives with delta Servo's. Raw material is weighing in 26kg. In this video i do a introductions of the project, and made the first part for it.part 2: youtu.be/OU-bKb_KJBUpart 3: youtube.com/watch?v=ZgOfc6giFWU
Rework of a htd 5m pulley. Stef van Itterzon 2021-05-02 | Soon i gone start a 5th axis trunnion build, which i want to fully record for Youtube. This is a test record to see how clear image can be when you record while using flood coolant. Seems that after a while the image start to be unclear. Right now i used a air blow to clean the lens while filming.
Epoxy granite cnc mill enclosure update Stef van Itterzon 2021-02-13 | Its been a while since i did a update video about the milling machine, last few months i worked on the enclosure with flood coolant.The model of the machine is downloadable on Grabcad if you are interested:grabcad.com/library/epoxy-granite-vertical-cnc-mill-
Machining a billet Zundapp engine block part 3 A running engine. Stef van Itterzon 2020-10-31 | As a new project i want to cnc machine a old Zundapp engine block which no longer be made. To complete the engine block there will be a total of 35kg of aluminium.In this video, im making the clutch cover and have its first test run!The video is made from small clips and pictures recorded with my phone. During the machining and assembly process.
Machining a billet Zundapp engine block part 2 Stef van Itterzon 2020-09-20 | As a new project i want to cnc machine a old Zundapp engine block which no longer be made. To complete the engine block there will be a total of 35kg of aluminium.The video is made from small clips and pictures recorded with my phone. During the machining and assembly process.
Machining a billet Zundapp engine block part 1 (with actual cutting sounds) Stef van Itterzon 2020-05-21 | As a new project i want to cnc machine a old Zundapp engine block which no longer be made. To complete the engine block there will be a total of 35kg of aluminium. The video is made from small clips recorded with my phone. in this video you can hear the actual cutting on my epoxy granite cnc mill with actual machining speeds.
Machining a aluminium gearbox plate. Stef van Itterzon 2020-02-09 | A time laps video, of machining a gearbox plate from aluminium on my DIY epoxy granite cnc mill.
Epoxy granite cnc mill toolchanger explained Stef van Itterzon 2020-01-05 | Little explanation about how the DIY toolchanger works on my Epoxy Granite cnc mill.Link the the machining video: youtube.com/watch?v=_Yqt3Masif8
Small update on epoxy granite cnc mill Stef van Itterzon 2019-12-15 | A small update movie about the progress i made the last 1.5 month.
Epoxy granite cnc mill walk around Stef van Itterzon 2019-10-21 | A little walk around movie about my epoxy granite cnc mill build i have been working on the last half year.Here are two forums with some build logs of this machine:cnczone.com/forums/vertical-mill-lathe-project-log/337318-cnc-forum-posts.htmlhttps://cnczone.nl/viewtopic.php?f=8&t=14444model downloadable on grabcad: grabcad.com/library/epoxy-granite-vertical-cnc-mill-1
first movements of the X axis Stef van Itterzon 2017-11-09 | this is the max rpm of the servo. should be around 15m/min
bf25 cnc converted first cuts Stef van Itterzon 2016-05-16 | first cuts on the new cnc mill. An old bf25 converted to cnc.
Omega test drive 2 Stef van Itterzon 2016-03-26 | Robot completed with end weight of 13,4 kg.Driving and filming at same time stays difficult.
weapon test with new motor Stef van Itterzon 2016-01-23 | test with new motor aprox 10k rpm on the drum
DIY Air to water heatpump first test run Stef van Itterzon 2014-07-22 | First bench test for my diy heatpump, in side the blue container ther is 100 liters of water. With the following data i can calculate the COP of the heatpump.DT = 20 degreesMass = 100 litersC = 4180JPW = 0,528 kWh of used electricity Q = M * C * DT = 100 * 4180 * 20 = 8360000 joule E = 3600000 * 0,528 = 1900800 joule COP= 4,398Overall a very impressive test run.
Velleman K8200 printing vase Stef van Itterzon 2014-03-02 | Printing a vase with my new velleman K8200 3d printer with PLA
First steps with inverse kinematics Stef van Itterzon 2013-06-18 | First step with inverse kinematics for a new hexapod project. The parts for this demo leg are printed with my new 3d printer.The math is done in visual basic and send by a serial connection to an arduino witch controls the servo's. The two sliders in the program are changing the Y and X coordinates from the tip of the leg. The program then calculates the angels that are needed to get the leg to that point.
Tracked vehicle controlled by accelerometer of mobile phone Stef van Itterzon 2012-08-02 | This video is of one of my hobby projects. What I've done is written a application in Basic4Android that runs on any Android device. This application gets the accelerometer data for two axis.This data is translated into two variables that represent the direction and speed of both motors. These two variables are send to the Arduino using the bluetooth shield. Arduino translates these two variables are converted to a PWM signal that is send to the home build dual speedcontroller.
RGB led strip controlled by Samsung Galaxy SIII Stef van Itterzon 2012-07-30 | This is a video showing a small proof of concept test where I control a RGB led strip with my Samsung Galaxy SIII. The RGB led strip is attached to a Arduino with a bluetooth shield. The android software is written and compiled in Basic4Android.
Heating DIY solar panel with EVA Stef van Itterzon 2012-06-14 | Produced with CyberLink PowerDirector 9
Opbrengst log app test Stef van Itterzon 2012-04-22 | De applicatie haalt 2 gegevens op bij mijn arduino die de opgewekte stroom bij houd, en het actuele vermogen. Het actuele vermogen wordt elke keer als er geupdate wordt in de grafiek toegevoegd. Als in filmpje te zien is word de data nu telkens opnieuw ingelezen.
Eerste test met stroomtransformator Stef van Itterzon 2012-03-28 | De eerste test stroom travo met een 20watt bureau lamp
Charging Lipo by solar power Stef van Itterzon 2012-03-11 | I'm currently building my own solar panels to place on our roof, and I just soldered the first panel. It was a nice sunny day and for a load-test I attached my model charger on the solar panel.In this video you see the home build solar panel charging a 3S 2000mAh Lipo at 1C charge current. This generated a load of about 25W.The panel is made out of 24 polycrystalline photovoltaic cell of 6x6". Each cell produces a maximum of 8A on 0.55V. The total theoretical power of this panel is about 100W, but with losses due to the glass and normal conditions it will deliver around 70W.Total cost to build one panel is without electronics is about 70 euro's without cable and electronics.Now this is environmental friendly battery charging!
4 wiel aangedreven platform aangestuurd door Galaxy Tab 10.1 Stef van Itterzon 2011-11-26 | Een 4 wiel aangedreven platform, de motors worden geschakeld door 4 wissel relais, via het relais bord uit het vorige filmpje. De comado's worden wederom weer verstuurt via bluetooth, echter nu niet met druk knopen maar aan de hand van de hoek van de tablet.
Bluetooth relais besturing Stef van Itterzon 2011-11-20 | Een 8 voudige relais bord aangestuurd door een Arduino uno, met daarop een bluetooth shield verbonden met een Android device waarmee elk relais individueel bestuurd kan worden. De software voor de telefoon is geschreven in Basic 4 Android.
Arduino led display Stef van Itterzon 2011-10-10 | 2 7-segment led display's multiplex by one Arduino uno Displayed value controlled by pot-meter.
