Uploaded September 2011 | Updated November 2026, 3 hours ago
This is test cell #3. Attempts to kill test cell #2 is as of yet, not possible. Full Day load test with 2K resistive load, cell bounces back after removing load, without any energy input on my behalf. Test Cell #3 here shows initial voltage reading and Current production. Lights LED. Tests will follow after sitting over night, as well as load testing to see if spontaneous rebound charging occurs. AGAIN, THIS IS A ZnO, Epsom salt, galina batttery with Mg/Cu electrodes.
Hermetically sealed with 5 minute EPOXY as per Lidmotor, and incorporation of Molecular sieve as internalized desiccant. The peculiar re-energization is noted, and determination of input energy force still needs to be ascertained.
This is test cell #3. Attempts to kill test cell #2 is as of yet, not possible. Full Day load test with 2K resistive load, cell bounces back after removing load, without any energy input on my behalf. Test Cell #3 here shows initial voltage reading and Current production. Lights LED. Tests will follow after sitting over night, as well as load testing to see if spontaneous rebound charging occurs. AGAIN, THIS IS A ZnO, Epsom salt, galina batttery with Mg/Cu electrodes.
Hermetically sealed with 5 minute EPOXY as per Lidmotor, and incorporation of Molecular sieve as internalized desiccant. The peculiar re-energization is noted, and determination of input energy force still needs to be ascertained.










