Uploaded April 2026 | Updated November 2026, 3 hours ago
Join me as we try cutting open a beautiful piece of zebra agate from Payson, Arizona with a rock saw. This lapidary journey takes an important turn when a kinked hose leads to significant silica dust exposure. It's a key reminder about safety and preventing silicosis in our rockhounding adventures.
#thefinders #rockhounding #rockcutting
Join me as we try cutting open a beautiful piece of zebra agate from Payson, Arizona with a rock saw. This lapidary journey takes an important turn when a kinked hose leads to significant silica dust exposure. It's a key reminder about safety and preventing silicosis in our rockhounding adventures.
#thefinders #rockhounding #rockcutting



![Dull Rocks After Tumbling? Check This First
Dull rocks after tumbling? If your tumbled rocks look shiny when wet but dull when dry, the polish may not be the first thing to blame. In this quick rock tumbling guide, I’ll show you why water hides scratches, pits, bruises, and surface flaws — and why those problems show up again once the rocks dry.
This video explains the most common reasons tumbled rocks lose their shine, including incomplete grinding, grit contamination, mixed hardness, undercutting, poor polish, hard water, and polish haze. We’ll also cover why burnishing can help clean residue, but cannot fix scratches or a bad surface.
This is the second video in my Quick Rock Tumbling Guides series from Will O’s Southwest Studio. If your rocks only look shiny when wet, check the surface prep first.
◉══════[ CHAPTERS ]══════◉
00:00 Why Rocks Look Shiny Wet But Dull Dry
00:40 Polish Does Not Create Smoothness
01:24 The Most Common Causes
03:19 Burnishing and the Real Fix
04:17 Check the Surface First
#RockTumbling #RockTumbler #RockPolishing #Lapidary #WillORocks Dull Rocks After Tumbling? Check This First](https://i.ytimg.com/vi/qlB9sJcd-X8/mqdefault.jpg)






