Uploaded August 2026 | Updated November 2026, 2 days ago
Thin walls are where most desktop CNCs give up. Chatter, deflection, heat — cut too aggressively and the blade folds; cut too gently and it never finishes.
So we gave the MAKERA Z1 PRO one of the hardest shapes in machining: a full aluminum impeller
This build runs from stock to finished part — roughing, the flip to the second setup, blade finishing, and a caliper check at the end to see how close we actually landed to the CAD model.
Makera official wesite:https://tr.ee/g72EAG
Thin walls are where most desktop CNCs give up. Chatter, deflection, heat — cut too aggressively and the blade folds; cut too gently and it never finishes.
So we gave the MAKERA Z1 PRO one of the hardest shapes in machining: a full aluminum impeller
This build runs from stock to finished part — roughing, the flip to the second setup, blade finishing, and a caliper check at the end to see how close we actually landed to the CAD model.
Makera official wesite:https://tr.ee/g72EAG










