Welcome to Shop Talk, a podcast from the team at Autodesk Fusion where we catch up with designers and makers live from their workshops. Whether you're a Fusion fan curious about what our users are doing or simply looking for something to listen to in your own shop, we’re bringing you candid conversations with talented designers who pour their hearts and souls into their craft. In this episode, designer, fabricator and Autodesker Trent Still speaks with Mike Burroughs of Stanceworks.
Mike is best known as the editor-in-chief of Stanceworks, an online journal featuring some of the best modified cars that focus on stance culture. But he's more than just a writer, photographer, and storyteller—he's also an accomplished car builder, amateur TimeAttack racer, and authority on K-swapped Ferraris. His latest venture is documenting his work on a wide swath of exciting car builds on his Youtube channel.
Trent and Mike talk all things car design, racing, fabrication, and the future of the car customization industry.
Timestamps for the Time-Strapped: 00:00 - Welcome to Shop Talk! 00:50 - Get to know Mike Burroughs! 05:00 - We need to know your process. 13:50 - It's Shop Talk so let's talk about your shop! 17:35 - What new technology is exciting you? 29:00 - How can we think smarter about education and learning? 42:50 - If anything was possible, what are you building? 50:27 - Tell us about your digital toolbox. 57:10 - Mike, where can we find you?
Check out Mike's channel here: https://autode.sk/3tzSl2T
If you're ready to learn more about Fusion:
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
Shop Talk with Mike Burroughs of Stanceworks | Autodesk FusionAutodesk Fusion2023-10-19 | #shoptalk #fusion360 #fusion360users
Welcome to Shop Talk, a podcast from the team at Autodesk Fusion where we catch up with designers and makers live from their workshops. Whether you're a Fusion fan curious about what our users are doing or simply looking for something to listen to in your own shop, we’re bringing you candid conversations with talented designers who pour their hearts and souls into their craft. In this episode, designer, fabricator and Autodesker Trent Still speaks with Mike Burroughs of Stanceworks.
Mike is best known as the editor-in-chief of Stanceworks, an online journal featuring some of the best modified cars that focus on stance culture. But he's more than just a writer, photographer, and storyteller—he's also an accomplished car builder, amateur TimeAttack racer, and authority on K-swapped Ferraris. His latest venture is documenting his work on a wide swath of exciting car builds on his Youtube channel.
Trent and Mike talk all things car design, racing, fabrication, and the future of the car customization industry.
Timestamps for the Time-Strapped: 00:00 - Welcome to Shop Talk! 00:50 - Get to know Mike Burroughs! 05:00 - We need to know your process. 13:50 - It's Shop Talk so let's talk about your shop! 17:35 - What new technology is exciting you? 29:00 - How can we think smarter about education and learning? 42:50 - If anything was possible, what are you building? 50:27 - Tell us about your digital toolbox. 57:10 - Mike, where can we find you?
Check out Mike's channel here: https://autode.sk/3tzSl2T
If you're ready to learn more about Fusion:
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSIncrease Your Design Efficiency in Autodesk Fusion Assemblies with Edit in Place!Autodesk Fusion2023-12-31 | Edit in place is continuing to be enhanced with every Autodesk Fusion update. The Surface Offset and Surface Patch tools are now supported, allowing the editing your surface models in the context of assemblies!
Edit in place is feature-rich, with all the most commonly used tools now supported, allowing you to increase your design efficiency in assemblies.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSLearn How to Show Sketch Dimensions in Autodesk Fusion FAST!Autodesk Fusion2023-12-29 | In this video, we will explore sketch visibility and sketch dimension visibility in Fusion 360. We will learn how to display and modify sketches and sketch dimensions without having to edit them. To follow along, you can download the dataset "Shell Chair" here: https://autode.sk/3v8Oxqc
It's important to experiment with these techniques and understand the breaking points of features to effectively update and modify designs. Thank you for watching, and we'll see you in the next video!
If you like your tutorials written down, check out the Fusion blog: https://autode.sk/3GRi0HG
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSMaster Autodesk Fusion: Understanding Bodies vs Components [UPDATED!!]Autodesk Fusion2023-12-27 | In this video, we tackle one of the most common questions we receive: what is the difference between bodies and components in Autodesk Fusion? We start by exploring the foundational building block: bodies. A body in Fusion refers to any continuous 3D shape, such as a sphere or a coil. Bodies are identified by a cylinder icon in the browser and must be continuous. Cutting a body in half creates two separate bodies. We discuss three specific constraints that bodies have, including sharing the coordinate system and origin of the top-level assembly, independent changes when copying and pasting, and exclusion from parts lists and part drawings.
Next, we delve into components. In Fusion, a component is a part with its own unique origin, enabling motion in the design space. Components serve as containers for various design objects. We use a piece of furniture as an example to illustrate the concept. Components are represented by block icons in the browser, with multi-block icons indicating components containing other components and design objects. Expanding a component reveals nested objects like origins, bodies, sketches, construction planes, and even other components. Notably, components have their own unique timeline, which can be activated by selecting the radial button in the browser.
Lastly, we provide an example workflow, demonstrating how to create a new body or component using the extrude command. We explain the distinction between creating a new body in the main Bodies folder and creating a new component listed at the bottom of the browser. Activating a specific component ensures that changes are nested within its own timeline. We conclude by highlighting the versatility of components in organizing complex projects and facilitating the reuse of design parts in other projects.
If you found this video helpful, please subscribe to our channel to stay updated with more tips, tricks, tutorials, and updates from the Autodesk Fusion team. Thank you for watching!
If you're looking for reading material on the subject, check out the Fusion blog! ► 5 Things You Should Know About Bodies vs Components in Fusion: https://autode.sk/3ND4Guj ► Components & Bodies for New Designers: https://autode.sk/41sHlRK
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSLearn How Autodesk Fusion Automatically Adds Sketch Contraints!!Autodesk Fusion2023-12-25 | Merry Christmas! 🎁 Here's a short video to teach you how Autodesk Fusion automatically adds constraints in the Sketch environment!
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSSurface Modeling in Autodesk FusionAutodesk Fusion2023-12-23 | Model a bottle using surfacing techniques in Autodesk Fusion. Follow Simon as he shows you how to convert a hand-drawn concept into a dynamic 3D bottle with the core surfacing tools available in Fusion: the Canvas, Calibration, Edit Form, Split Body, Patch & Stitch tools.
Follow along with this tutorial by downloading the original concept sketch Simon uses to model his bottle: https://autode.sk/41woJAm
🚀 Join over 1.2 million professionals who use Autodesk Fusion to supercharge their design to manufacturing workflows. ►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
💬 Ask the Autodesk Community for help with Surface Modeling, designing, manufacturing, drawings or anything else in Autodesk Fusion. ►FUSION FORUMS | https://autode.sk/47NiKsJ ►ASK THE COMMUNITY | https://autode.sk/3SYjMhv
📣 CONNECT with Fusion on social media: ►INSTAGRAM | https://autode.sk/2Enzh8P ►TWITTER | https://autode.sk/45cIYTK ►LINKEDIN | https://autode.sk/3UyieZS
🕰️ Time Stamps for the Time-Strapped: 00:00 Welcome to the video! 00:12 Inserting a canvas image 00:31 Calibrating a canvas image 01:27 Creating a form shape 02:12 Adding symmetry to a form 02:33 Using the edit form tool 03:42 Splitting form bodies with a sketch 06:39 Extruding a surface body 06:58 Using the trim tool 07:46 Offsetting and extending the surface body 08:37 Sweeping surfaces to fill the gaps 10:30 Trimming overbuilt surfaces 11:18 Mirror and patch the surface body 12:01 Stitching surface bodies together 12:48 Thanks for watching!
Autodesk #makeanythingTransform Your Designs: How to Create Realistic Threads in FusionAutodesk Fusion2023-12-21 | In this YouTube video, we explore how to create realistic modeled threads in Autodesk Fusion. We start by examining metric examples for both external and internal threads. The thread tool allows us to select a cylindrical face and automatically generate a cosmetic appearance of a thread. We can also choose to create a physical model of the thread for rendering or visualization purposes. The tool offers options to adjust the length, profile, and designation (pitch) of the threads based on our selection. We discuss the importance of understanding thread class and tolerance, as it affects the physical dimensions of the part.
For internal threads, we demonstrate how to use the hole tool, which provides the ability to create threaded holes. We can either manually place a single point or select a sketch point as the starting location. The hole tool also offers the option to model the threads for a more realistic representation. We highlight the benefits of using the hole tool, such as easily adding multiple points in a sketch or adjusting the thread placement on a face.
Additionally, we compare the process of creating threads in metric and imperial units. We explain the differences in thread designations, pitch, and class between the two systems. Fusion provides default options based on the selected unit system, but users can select the thread profiles and sizes according to their needs.
Whether you're working with internal or external threads, this video provides a comprehensive guide to help you understand and utilize the thread and hole tools in Fusion. Watch the video to learn how to create accurate and realistic modeled threads in your designs!
If you're more of a reader, check out our blog post on creating threads: https://autode.sk/3vaXajR
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSAutodesk Fusion Now Has Fastener Libraries!Autodesk Fusion2023-12-19 | An exciting new library has been integrated into Autodesk Fusion!!
Fasteners will now be natively supported and found under the insert tab.
Once you have chosen your washer, bolt or nut from the Fastener library, you will be able to hover over the chosen hole and Fusion will automatically find similar holes on the same plane and auto populate those for you.
That’s right, you no longer have to click over and over again for every hole on that housing that you’re trying to mount! Also, when you need to add that washer you forgot later, the design will automatically update the joints to accommodate.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSDesign Showdown: Experience the Autodesk University 2023 Design Slam!Autodesk Fusion2023-12-17 | Design Slam at Autodesk University is an exciting and dynamic showcase of creativity and innovation in the field of design. Bringing together talented professionals, students, and enthusiasts, the Design Slam offers a platform for participants to demonstrate their skills and problem-solving abilities in a fast-paced and competitive environment. During the event, participants are given a specific design challenge and a limited amount of time to come up with a solution using Autodesk Fusion. The atmosphere is electric as participants collaborate, brainstorm, and push the boundaries of design to create unique and impactful solutions. The Design Slam at AU 2023 was a testament to the power of collaboration, creativity, and technology in shaping the future of design.
Special thanks are due to our sponsors for this year's Design Slam: Lenovo Thinkstation and NVIDIA!
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSShop Talk with Ruth Amos of Kids Invent Stuff | Autodesk FusionAutodesk Fusion2023-12-14 | Welcome to Shop Talk, a podcast where we catch up with designers and makers live from their workshops. In this special holiday episode, designer and Autodesker Jonathan Odom speaks with Ruth Amos of Kids Invent Stuff.
Ruth Amos is an inventor, engineer, and runs the YouTube channel @KidsInventStuffAfter inventing an award-winning disability aid at the tender age of 16, she focused her energy on making sure primary school-aged kids can see themselves in the engineering field. Every month, she takes a kid’s idea and brings it to life on her channel.
Note: The Shop Talk podcast will be taking a holiday break to enjoy time with our families, as we hope you all will do with yours! We can't wait to return to you with brand new episodes in January!
Time Stamps for the Time-Strapped: 00:00 - Welcome to Shop Talk! 03:20 - Get to know Ruth! 09:50 - How do you actually help the kids invent stuff? 20:35 - Tell us about your epic failures. 26:48 - How does CAD/CAM software fit into your process? 34:14 - It's Shop Talk, so tell us about your shop. 39:19 - Tell us about #YTMakersSecretSanta! 45:15 - How would you improve Santa's sleigh?
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSYou Can Now Configure Properties in Autodesk Fusion!!!Autodesk Fusion2023-12-12 | In Autodesk Fusion Configurations, you will now be able to configure the part number and description of any internal component inside a configured design.
This gives you more control of your component data, allowing internal components to be better managed in downstream workflows. For example, in a parts list inside your assembly drawing, where the part number and description are critical.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSHighlighting Self Intersections NOW in Autodesk FusionAutodesk Fusion2023-12-10 | Floating red markers that overlay the canvas and highlight self-intersections in your form or t-spline bodies have been added to Autodesk Fusion.
They will automatically scale, always be viewable to you, and are additional to the surface highlighting that already existed in Fusion.
This will allow you to find and make corrections to your surfaces where, previously, this was difficult.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSSketch Constraints Made Easy in Autodesk Fusion [UPDATED!]Autodesk Fusion2023-12-07 | In this updated Autodesk Fusion YouTube video, learn about all 12 of the Sketch Constraints available in Autodesk Fusion. Watch to see Autodesk Certified Instructor Ollie explain what sketch constraints are used for, how to use each of the constraints, and offer tips on how to most efficiently take advantage of sketching constraints in your workflow.
🕰️ Time Stamps for the Time-Strapped: 00:00 Welcome to the video! 00:18 What are sketch constraints in Autodesk Fusion? 01:28 Horizontal/Vertical constraint 02:12 Coincident contraint 02:42 Tangent constraint 03:29 Equal constraint 04:13 Perpendicular and Parallel constraints 04:35 Fix/UnFix constraint 05:02 Midpoint constraint 05:30 Concentric constraint 05:52 Colinear constraint 06:22 Symmetry constraint 06:52 Curvature (G2) constraint 07:25 Automatically adding constraints 08:17 Deleting constraints 08:53 Finding the possible constraints 09:43 Thanks for watching!
🚀 Join over 1.2 million professionals that use Autodesk Fusion to supercharge their design to manufacturing workflows. ►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
💬Ask the Autodesk Community for help with Sketch Contraints, designing, manufacturing, drawings or anything else in Autodesk Fusion: ►FUSION FORUMS | https://autode.sk/47NiKsJ ►ASK THE COMMUNITY | https://autode.sk/3SYjMhv
📚 Learn more about EduCAD, our Autodesk Learning Partner, here: edu-cad.comYou Can Now Sync Legends in Autodesk Fusion Simulation Studies!Autodesk Fusion2023-12-05 | We’ve added the ability to sync results and legends for injection molding simulation outcomes in Autodesk Fusion.
When selected, the two sides will be linked together so that as the legend is changed for one, it changes the other too.
This allows you to quickly and easily compare results from two simulations while keeping key parameters the same.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSBoost Your Productivity with CAM Assist in Autodesk Fusion ⚙️Autodesk Fusion2023-12-03 | What if you could complete machining strategies in one click, empower your team and optimize efficiency, transform processes from days and hours to minutes or seconds. Does this sound too good to be true?
With CAM Assist from CloudNC, you can generate all of the tool path operations for your part in as little as one click download and try the CAM Assist add-in for Autodesk Fusion today.
Learn more here: https://autode.sk/47UHvmW
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSShop Talk with James Bruton | Autodesk FusionAutodesk Fusion2023-11-30 | Welcome to Shop Talk, a podcast where we catch up with designers and makers live from their workshops. In this episode, designer and Autodesker Jonathan Odom speaks with James Bruton.
James is a former toy designer, current YouTube maker and general robotics, electrical and mechanical engineer. He's a fan of DIY and innovating through trial and error. He believes 3D printing can solve most issues and we spend this episode learning more about him and his inventions.
Check out James' channel here: @jamesbruton
Timestamps for the Time-Strapped: 00:00 - Welcome to Shop Talk! 00:53 - Get to know James! 02:40 - Let's take a tour of your shelf... 13:27 - What made you start content creation? 23:10 - Why 3D printing? 27:37 - Let's talk collaborations! 37:52 - It's the end of the world and your shop didn't survive. What's tool #1?
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSLive from #AU2023! Brad of Fix This Build That Joins Shop TalkAutodesk Fusion2023-11-17 | This week we have a special episode of Shop Talk for you! Filmed live from the Autodesk Fusion + Partners Factory Experience at AU the Design & Make Conference 2023, Autodesker Luke Mihelcic catches up with Brad Rodriguez of @Fixthisbuildthat to play Would You Rather?, talk about @FTBT3D, and the joys of parametric modeling.
Timestamps for the Time-Strapped: 00:00 - Welcome to AU 2023! 00:52 - Would Luke and Brad be friends? 06:05 - Tell us about yourself, Brad! 11:05 - Why is woodworking having such a moment right now? 12:50 - How do digital tools you? 17:25 - Would You Rather? Woodworking Edition
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSBoost Your Productivity with the Flow Toolpath in Autodesk FusionAutodesk Fusion2023-11-09 | Autodesk Fusion strives to continually improve existing toolpaths and develop new strategies. As such, as part of the September release, the Flow toolpath is being replaced by a more capable, stable, and robust underlying algorithm. This new algorithm works better on complex free form surfaces, allows you to specify a step over, and is more robust so you'll end up with less toolpath fragmentation and better surface finishes.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSAchieve Precision and Efficiency with Multi Axis Deposition in Autodesk FusionAutodesk Fusion2023-11-07 | Multi-axis deposition toolpaths in Autodesk Fusion are now available, enabling you to drive multi-axis additive manufacturing machines, including metal processes such as directed energy deposition but also polymer and concrete deposition processes. With this flexibility, you can create entire parts or even just add features to existing components, as well as create toolpaths for repairing components such as molds, dies, and impellers. Autodesk Fusion provides the full suite of machining toolpaths so, once you’ve created your additive toolpath, you can pass the stock model forward to subsequent subtractive machining operations for a complete end to end hybrid manufacturing workflow.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSShop Talk with Stefan Hermann of CNC Kitchen | Autodesk FusionAutodesk Fusion2023-11-02 | #shoptalk #fusion360 #fusion360users
Welcome to Shop Talk, a podcast where we catch up with designers and makers live from their workshops. In this episode, designer and Autodesker Jonathan Odom speaks with Stefan Hermann of CNC Kitchen.
Stefan Hermann is a well-known figure in the CNC and 3D printing community as the creator of the popular YouTube channel "CNC Kitchen." On his channel, Stefan shares in-depth reviews, tutorials, and experiments related to CNC machines, 3D printers, and other fabrication tools. He covers topics such as machine calibration, material testing, slicing software, and much more. His content is valuable for both beginners and experienced users in the CNC and 3D printing community. We spoke with him about his work in aerospace, the frontier that is additive manufacturing, and all the cool stuff on his shelf.
Check out Stefan's channel here: https://autode.sk/3solkGA
Timestamps for the Time-Strapped: 00:00 - Welcome to Shop Talk! 01:15 - Get to know Stefan! 03:55 - Your day job is in aerospace. How does that affect your YouTube channel? 09:15 - It's Shop Talk so let's talk about your shop! 19:22 - What are the 3d printing applications in aerospace? 28:08 - Why is additive manufacturing important to learn? 33:44 - What are you cooking up in the CNC Kitchen? 38:22 - It's the end of the world and your shop didn't survive. What's tool #1?
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSStay Ahead of the Curve with the Autodesk Fusion October 2023 UpdateAutodesk Fusion2023-10-31 | #cadcam #configurations #fusionupdates
Welcome to the What’s New in Autodesk Fusion YouTube video for October. This update is extra exciting for us: Fusion has reached its 10th birthday, a major milestone, and we want to thank you for being a part of our community.
This Autodesk Fusion release is full of new features and enhancements to improve your design, simulation, and manufacturing needs. In the Design workspace, we are excited to announce the release of Fastener libraries changing the way you add these to your designs and increasing your productivity.
For a deeper dive into the latest enhancements in Autodesk Fusion, check out our blog: https://autode.sk/3Qe6Voq
Remember to subscribe to our channel and hit the bell icon to stay updated with our latest releases!
Chapters: 00:00 - Cheers to 10 years of Autodesk Fusion! 00:25 - Let's kick things off with Fusion Electronics 01:49 - New Fusion Design Feature: Fastener Libraries 03:32 - We've added Configure Properties to Configurations 05:00 - We've added functionality to Edit in Place 07:04 - Sync Results and Legends in Fusion Simulation 07:42 - New Fusion Manufacturing Toolpath Strategy: Geodesic 09:55 - Streamline data management with Manage Extension improvements
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSUnleash Your Design Potential with Enhanced T-spline Subdivide Tools in Autodesk FusionAutodesk Fusion2023-10-26 | Autodesk Fusion brings in enhanced T-spline subdivide tools, creating quadrilateral divisions on any surface.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSConnect Additive Workflows with the HP 3D Printer App | Autodesk FusionAutodesk Fusion2023-10-24 | The HP App for Autodesk Fusion allows you to connect and transfer print build information directly to your HP 3D printers from within Fusion. Once your print preparation is complete, you're able to select the printer you’d like to transfer the information to from the app and connect it. Once connected, you can verify the material loaded in the machine, select the print profile you want to use, customize the settings, and then submit the job directly to the printer.
The end result is the ability to streamline additive workflows to reduce expensive errors while meeting your goals and customer needs.
Download the app here: https://autode.sk/3mcLrNp
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSBoost Your Autodesk Fusion Game: Expert Tips on Bar Pulls and Sub-Spindle Transfers!Autodesk Fusion2023-10-22 | Quick tips coming in hot from the Autodesk Birmingham Tech Center! This one is about bar pulls and sub-spindle transfers! Let us know in the comments what else you'd like to see!
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSDon’t Miss This New Episode of Shop Talk From Autodesk Fusion!Autodesk Fusion2023-10-17 | Welcome to Shop Talk, a podcast from the team at Autodesk Fusion where we catch up with designers and makers live from their workshops. Whether you're a Fusion fan curious about what our users are doing or simply looking for something to listen to in your own shop, we’re bringing you candid conversations with talented designers who pour their hearts and souls into their craft.
The third episode, starring Mike Burroughs of Stanceworks, drops on the 19th of October! Go here and click the bell to be notified: youtu.be/YqXnuM8THl4
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSSave Time and Effort: Learn Essential Keyboard Shortcuts for Autodesk Fusion ElectronicsAutodesk Fusion2023-10-15 | In today's world, successful product development is about how fast and efficiently we can get to market. Enhance your design experience with Autodesk Fusion Electronics keyboard shortcuts. This feature allows you to assign keystroke shortcuts to a single command or a complete command line sequence, a helpful script, or execute a ULP (User Language Program). Users can assign shortcuts to easily access schematic bill of materials or display a different view of your design statistics. Another popular use case is creating a shortcut for a command that highlights assets on the PCB that have been selected on the schematic. Some Autodesk Fusion power users use it to switch grids for routing and placing parts.
Be more productive with Autodesk Fusion, and happy designing!
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSStreamline your design process with Configurations Management in Autodesk FusionAutodesk Fusion2023-10-12 | Streamline your design process with Fusion 360's Configurations Management. Manage multiple design variations effortlessly, minimizing clutter and maximizing efficiency.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSLevel Up Your Additive Manufacturing Game with Arrangement Statistics in Autodesk Fusion!Autodesk Fusion2023-10-12 | When using 2D or 3D arrange in Autodesk Fusion additive manufacturing, you can now inspect the build and find out: the number of parts within your build volume, the arrangement density based on the printer's available volume, and the build height of your arranged components.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSCheers to 10 years of designing and making with you | Autodesk FusionAutodesk Fusion2023-10-10 | This year, 2023, Autodesk Fusion 360 is turning 10 years old. That’s 10 years of designing differently, 10 years of community-driven development, and 10 years of amazing products and content made possible by you. To celebrate, we have compiled a special 10-year anniversary video highlighting our content creator community, as well as a number of folks from the Fusion 360 team. Thank you for being with us for the past 10 years. You’re not done designing and making a better future, and neither are we. So, let’s keep doing this together—now and for the next 10 years.
00:00 - Thank you for 10 years of design and make! 01:27 - John Saunders of Saunders Machine Works 02:53 - Justin Brouillette of PDXCNC 03:10 - Spencer Nugent 04:17 - Agustin Arroyo a/k/a "Flowalistik" 05:12 - Michael DiTullo 05:57 - Alex Lobos 06:50 - Emanuele Ciccone 07:28 - Emiel Noorlander 08:30 - Andrea Prazzini 09:30 - "Dr. Phil" Butterworth 11:01 - Lars Christensen and the Fusion Team
If you'd like to catch up with our amazing Fusion community, check out their pages:
John Saunders on YouTube - https://autode.sk/45uj0vg Justin Brouillette on YouTube - https://autode.sk/46kT5aA Andrew Pirazzini on YouTube - https://autode.sk/3Fc7SIO Spencer Nugent on YouTube - https://autode.sk/3tsCvXV Agustin Arroyo on Instagram - https://autode.sk/3rJ7qyw Michael DiTullo on YouTube - https://autode.sk/46uulgo Alex Lobos on Linkedin - https://autode.sk/3F9BQNt Emanuele Ciccone on Facebook - https://autode.sk/3PPoL0L "Dr. Phil" Butterworth - https://autode.sk/3LVQxrr
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P TWITTER | https://autode.sk/45cIYTK LINKEDIN | https://autode.sk/3UyieZSCelebrating 10 years of Autodesk FusionAutodesk Fusion2023-10-09 | A decade ago, we lit the fuse on Fusion, Autodesk's Design and Make tool of the future. ► START FREE TRIAL l https://autode.sk/fusion360-download
It quickly caught fire—thanks to all our users. They’ve used Fusion to 3D-print cerebral arteries so doctors can learn how to perform X-rays on blood vessels without practising on animals. They’ve used its generative design capabilities to design lighter-weight parts for more precise CNC machine tools that use less energy. They've used it to prepare the next generation of engineers, designers, and machinists for a rapidly evolving industry. And to build a bespoke, mid-engine, methanol-breathing, 1,400 horsepower, all-wheel drive beast. And they've inspired us all along the way.
You’ll find Fusion is miles ahead of the tool we rolled out 10 years ago. Autodesk Fusion is not just PDM or PLM. Not just CAD or CAM. It’s all of them. Plus – it’s simulation, documentation, rendering, and electronics. All brought together in a way that hasn’t been done before — a democratization of technology that solves complex manufacturing problems yet is easy to use and easy to integrate.Achieve Perfect Signal Integrity with Autodesk Fusion ElectronicsAutodesk Fusion2023-10-08 | In electronics design, signal integrity ensures that signals are transmitted without interference. It's like quieting a noisy room to have the most perfect, clear conversation. With Fusion 360, the complexity of maintaining signal integrity becomes simple.
Key features like smart routing and visualizing ground planes help to reduce "electronic noise" and maintain a clean signal path. Avoid the common pitfalls of unwanted signal coupling and crosstalk. Prevent your electronic signals from "overhearing" each other with the Autodesk Fusion Signal Integrity Extension.
Using the advanced simulation tools in Autodesk Fusion, predict and resolve signal issues before they even occur. Get real-time feedback and actionable insights, ensuring your designs are optimized for the real world. Whether you're a beginner or an expert, Autodesk Fusion ensures that your electronic designs are not just good on paper but impeccable in practice.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
Welcome to Shop Talk, a podcast from the team at Autodesk Fusion where we catch up with designers and makers live from their workshops. Whether you're a Fusion fan curious about what our users are doing or simply looking for something to listen to in your own shop, we’re bringing you candid conversations with talented designers who pour their hearts and souls into their craft. In this episode, designer and Autodesker Jonathan Odom speaks with Xyla Foxlin.
Xyla Foxlin is a mechatronics engineer by trade but influenced by her passion for the arts and working with her hands. A self-described “speedy jet with a broken compass,” her YouTube channel is a compelling mix of complex engineering projects and forthright content about herself as a person. We spoke with her about her process, her dream projects, and why the hand drill is the foundation of all tools.
Timestamps for the Time-Strapped: 00:00 - Welcome to Shop Talk! 01:12 - Get to know Xyla Foxlin! 04:25 - The importance of inspiration when picking projects 08:48 - What would be your dream collaboration? 11:55 - How does using CAD make projects more efficient? 16:30 - What is your ultimate project? (Hint: ✈️ ) 21:22 - It's Shop Talk so let's talk about your shop! 24:05 - It's the zombie apocalypse. What's tool #1?
If you want to check out Xyla's channel, go here: https://autode.sk/3LDLZWm
If you want to listen to the podcast on Spotify, go here: https://autode.sk/3ETJUBL
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSDon’t Miss This New Episode of Shop Talk From Autodesk Fusion!Autodesk Fusion2023-10-02 | Welcome to Shop Talk, a podcast from the team at Autodesk Fusion 360 where we catch up with designers and makers live from their workshops. Whether you're a Fusion 360 fan curious about what our users are doing or simply looking for something to listen to in your own shop, we’re bringing you candid conversations with talented designers who pour their hearts and souls into their craft.
The second episode, starring Xyla Foxlin, drops on the 5th of October! Go here and click the bell to be notified: youtu.be/cPBUbrqPGl4
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSUnlock Extreme Efficiency With the Sheet Metal Rip Feature in Autodesk Fusion!Autodesk Fusion2023-09-29 | Revolutionize your manufacturing workflow with the Sheet Metal Rip feature in Autodesk Fusion. Transition from intricate 3D sheet metal designs to manufacturable flat patterns with unparalleled ease.
We’re excited to introduce the Sheet Metal Rip feature—a game-changer for anyone using the sheet metal workspace. This tool automates the process of creating a tear line, then smooth sailing to turn sheet metal parts into flat patterns for manufacturing. If you go to the modify tab in Autodesk Fusion, select a face or two starting points, and then define your gap width. Then it’s done. This feature is particularly powerful for lofted parts like air ducts, hoods, or funnels.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSUnveiling True Efficiency with IG Masonry Support and Autodesk ProdsmartAutodesk Fusion2023-09-27 | IG Masonry Support Ltd, a leader in the construction industry, specializes in innovative masonry sup- port products. Supplying the construction industry with the most practical and advanced range of stainless steel masonry support products and revolutionary brick slip soffit systems, the company was grappling with challenges in tracking production and managing vast resources before the introduction of Autodesk Prodsmart.
Autodesk Prodsmart, a cloud-based MES software, emerged as the beacon of hope for IG Masonry Support. Key features that sealed the deal included: - Digitalization of tracking and traceability processes - Enhanced control mechanisms - Flexibility to adapt to unique project challenges
With Autodesk Prodsmart, IG Masonry Support achieved: - Faster and more reliable tracking processes - Significant reduction in production bottlenecks - Tangible time and cost savings - Enhanced adaptability to bespoke projects
►LEARN MORE | https://autode.sk/3TtkS2A ►FREE TRIAL | https://autode.sk/3rrTEQK
CONNECT with us on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSRevolutionize Your Designs with Configurations in Autodesk FusionAutodesk Fusion2023-09-25 | Welcome to a new era of design innovation! Autodesk Fusion now has Configurations functionality. Configurations allow professionals from every industry to manage multiple design variations seamlessly under one unified model.
Dive deep with us into a new world of product design and manufacturing solutions.
In this video, you will learn... ...how Configurations enhance design adaptability and management. ...insights into the creation and management of multiple design variations. ...the impact of Configurations across different environments. ...how to efficiently maneuver through Configured designs. ...how Configurations are shaping the future of design and manufacturing.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSShop Talk with Spencer Nugent of Sketch A Day | Autodesk Fusion 360Autodesk Fusion2023-09-21 | #shoptalk #fusion360 #fusion360users
Welcome to the premiere episode of Shop Talk, a podcast from the team at Autodesk Fusion where we catch up with designers and makers live from their workshops. Whether you're a Fusion fan curious about what our users are doing or simply looking for something to listen to in your own shop, we’re bringing you candid conversations with talented designers who pour their hearts and souls into their craft. In this episode, designer and Autodesker Jonathan Odom speaks with Spencer Nugent of Sketch a Day.
Spencer is living the designer's dream. He makes his living on his own terms, following his passion and sharing it with the world. He's best known for his YouTube channel, which focuses on industrial design sketching and the product design process. But there are so many other layers to his work, including consulting, design education, woodworking and more. This is a great conversation, and you're in for a treat!
Timestamps for the Time-Strapped: 00:00 - Welcome to Shop Talk! 01:10 - Get to know Spencer Nugent! 06:50 - What was your journey as a designer? 13:51 - It's Shop Talk so let's talk about your shop! 17:10 - Big Toaster is calling with a design request... 28:46 - Why did you switch to Fusion from Solidworks? 35:57 - How much does it cost to be the boss? 45:10 - Any tips for taking a product to market? 50:08 - It's the zombie apocalypse. What's tool #1?
If you want to see more of Spencer, visit his YouTube channel: https://autode.sk/3P3fnGw
If you want to listen to the podcast on Spotify, go here: https://autode.sk/3ETJUBL
If you want to learn more about Fusion:
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
If you want to CONNECT with Fusion on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSHow to use the Harvey Tool Resources Add-In for Autodesk Fusion 360Autodesk Fusion2023-09-20 | The team at Autodesk is pleased to announce the new Harvey Tool Resources Add-In for Fusion 360. This application runs inside Autodesk Fusion 360 and links to Harvey Tool's online database of tooling and tool holders, allowing users to program with confidence and accuracy. Quickly add Harvey Tool to your library by entering the Harvey tool number or you can access the online Harvey Tool catalog from directly within Fusion 360. If you program manually using paper tooling catalogs, and entering the data into Fusion 360 line by line, this add-in is for you.
The Harvey Tool add-in is available for Windows and Mac. To download the add-in, visit the Fusion 360 App Store and search for Harvey Tool.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSDont Miss the Autodesk Fusion September 2023 Updates!Autodesk Fusion2023-09-19 | #cadcam #configurations #fusionupdates
Welcome to the Autodesk Fusion technical overview for September 2023. This video will inform you of the exciting new advancements and enhancements across every workspace, demonstrating our commitment to CAD design excellence. Let's dive into Autodesk Fusion!
In the design workspace, you will notice many new features, such as Sheet Metal Rip, which now provides levels of automation. You will also enjoy the enhancements to edit non-quadrilateral faces and see how smooth edges are with our Bevel tool.
An exciting new feature: Configurations! This feature will improve productivity by centralizing multiple design interactions for efficient prototyping, manufacturing, and simulation.
We are replacing the Manufacturing Flow tool path with a new algorithm that works better on complex free-form surfaces for manufacturing. Also in Manufacturing, multi-axis deposition toolpaths (11:15) are now available as part of the Additive Build Extension.
For additional understanding of the new features in the latest release, our blog offers a deeper dive: https://autode.sk/44TRebb
To join the Insider Program and preview features early, go here: https://autode.sk/3PLxGBq
Chapters: 00:00 — Welcome to the Autodesk Fusion September 2023 release! 00:03 — Now Available: Sheet Metal Rip 02:19 — Work faster and smarter with Configurations 06:21 — Configurations in the Generative and Simulation Workspaces 06:48 — What's New in Fusion Manufacturing 08:40 — Improvements and Enhancements to Additive Manufacturing 12:15 — Join the Insider Program!
Don't forget to subscribe to our channel and hit the bell icon to stay updated with our latest releases. Happy designing!
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSCant Stop Talking About Fusion 360 | Autodesk Fusion 360Autodesk Fusion2023-09-18 | Yep, the talk is real. Configurations in Fusion 360 are designed to streamline how businesses approach product design, engineering, and manufacturing. By consolidating all design iterations and variants into a single file, this feature offers unparalleled agility, helping you adapt to market demands more swiftly than ever before. Whether in aerospace, automotive, consumer goods, or any other sector, Configurations enable a seamless transition from product design to CAM to simulation, thus cutting down time-to-market, reducing operational costs, and enhancing overall workflow efficiency.
► START FREE TRIAL l https://autode.sk/fusion360-download
Autodesk Fusion 360 combines CAD, CAM, CAE and PCB tools into a single cloud software solution.
With Fusion 360 at your fingertips, you can:
Explore design iterations with easy to use 3D modeling tools Produce high-quality CNC machined parts with integrated CAD/CAM Gain access to unified electronics design Test the performance of your designs with 3D simulation tools Explore manufacturing-ready outcomes with generative design Collaborate and manage your data seamlessly in the cloud
► START FREE TRIAL l https://autode.sk/fusion360-download
Share your stories using #Fusion360
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSDon’t Miss the New Podcast Coming From the Team at Autodesk Fusion 360Autodesk Fusion2023-09-13 | Welcome to Shop Talk, a podcast from the team at Autodesk Fusion 360 where we catch up with designers and makers live from their workshops. Whether you're a Fusion 360 fan curious about what our users are doing or simply looking for something to listen to in your own shop, we’re bringing you candid conversations with talented designers who pour their hearts and souls into their craft.
The first episode drops on the 21st of September! Go here and click the bell to be notified: youtu.be/28dUMC6x4UM
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSCheck out that beautiful surface finish! 🥶 | Autodesk Fusion 360Autodesk Fusion2023-09-11 | Autodesk Fusion 360 offers a comprehensive suite of tools and features for achieving precise surface finishes, ranging from basic smoothing and filleting to advanced sculpting and parametric modeling. Engineers and designers can create aesthetically pleasing surfaces that not only enhance the visual appeal of their products but also optimize their performance. Whether it's creating a sleek consumer product, an ergonomic automotive component, or an aerodynamic aerospace design, the surface finishing capabilities in Autodesk Fusion 360 empower users to bring their ideas to life with precision and sophistication.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
In this Autodesk Fusion 360 YouTube video, we're diving deep into the capabilities of the Fusion 360 CAM Processor. This tool provides flexibility, especially regarding tweaking the drivers for exporting your PCB manufacturing files. With the CAM Processor, you can effortlessly configure your outputs to align with the specific formats your manufacturer requires. So, whether you're a seasoned user or new to Fusion 360, this video aims to equip you with insights and techniques to produce your PCB manufacturing file export process quickly.
If you need a simpler workflow for exporting your PCB Manufacturing files, check out our other video: youtu.be/8hFwdqRZiY8
Want to learn more about Fusion 360 Electronics? Check out our playlists...
...for beginners: https://autode.sk/3sy1AQJ
...for bringing an electronics project to life: https://autode.sk/3PlRrja
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
Quick launch to the Autodesk Fusion 360 Electronics Workspace faster than ever before! Get to your PCB design with fewer clicks by following along in this Autodesk Fusion 360 quick tip tutorial video.
If you're interested in getting started with electronics design in Autodesk Fusion 360, check out our electronics playlist for beginners: https://autode.sk/3sy1AQJ
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSGet Lost in the Autodesk Fusion 360 Spiral Toolpath 😵💫 🌀Autodesk Fusion2023-09-04 | The Spiral toolpath in Autodesk Fusion 360 is versatile and can be applied to various machining tasks, such as roughing out material quickly, creating grooves or channels, and achieving precise quality surface finishes. Depending on your needs, 3-,4-, or 5- axis toolpaths can be created.
If you want to step up your CAM game, don't miss this playlist: https://autode.sk/3Pk52HA
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
Welcome to our Autodesk Fusion 360 tutorial video on exporting PCB manufacturing files! This beginner tutorial will walk you through the essential steps to ensure your PCB design is ready for fabrication. By the end of this Fusion How-To YouTube video, you'll have a clear understanding of how to export your PCB manufacturing files correctly, ensuring a seamless transition from design to fabrication. If you're ready to take your PCB design skills to the next level, hit that "Subscribe" button, give us a thumbs up, and let's get started! Don't forget to leave your questions and comments below, and we'll be here to assist you every step of the way. Happy PCB designing!
Want to learn more about Fusion 360 Electronics? Check out our playlists...
...for beginners: https://autode.sk/3sy1AQJ
...for bringing an electronics project to life: https://autode.sk/3PlRrja
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSCreate Stunning Electronics Designs with 3D Modeling in Autodesk Fusion 360Autodesk Fusion2023-08-30 | Are you ready to take your electronics design skills to the next level? Look no further! In this YouTube Short, we'll show you how to create stunning electronics designs using the powerful 3D modeling capabilities of Autodesk Fusion 360.
🌟 Fusion 360 is the go-to software for engineers, makers, and electronics enthusiasts. 📐 With Fusion 360, you'll have the tools you need to turn your creative ideas into functional, eye-catching prototypes.
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSBoost Your Precision with 5-Axis Machining in Autodesk Fusion 360Autodesk Fusion2023-08-28 | 5-axis machining in Autodesk Fusion 360 is a powerful feature that enables users to create complex and precise machined parts and surfaces using multi-axis CNC (Computer Numerical Control) machines. This capability is especially useful for industries like aerospace, automotive, and medical manufacturing, where intricate and contoured parts are common.
#fusionshorts #cadcam #5axismachining
►FREE TRIAL | https://autode.sk/3Wtfi20 ►SUBSCRIBE | https://autode.sk/30njGGX ►GET STARTED | https://autode.sk/30k2DWh ►TRY AN EXTENSION | https://autode.sk/3EOUidW
CONNECT with Fusion 360 on social media:
INSTAGRAM | https://autode.sk/2Enzh8P FACEBOOK | http://autode.sk/19jII5A TWITTER | http://autode.sk/19jIJXc LINKEDIN | https://autode.sk/3UyieZSFused Filament Fabrication (FFF) technology in 3D printing | Autodesk Fusion 360Autodesk Fusion2023-08-25 | In this video, we learn about Fused Filament Fabrication (FFF) technology in 3D printing. Join us as we dive into the topic of FFF, a groundbreaking technique that empowers creators and innovators to transform digital designs into tangible objects. Discover how FFF 3D printing works, its real-world applications across industries, and the limitless possibilities it offers for turning imagination into reality. From rapid prototyping to intricate models, FFF technology is reshaping the way we approach design and manufacturing.
Learn more about 3D Modeling in Fusion 360 - https://autode.sk/46NXnI6
#fusion360 #fusion360tutorial #fusion360tips #fusion360school #3dprint #3ddesigning #fusion360features #3dprinting3-Axis Roughing in CNC Machining | Autodesk Fusion 360Autodesk Fusion2023-08-23 | Step into the world of precision engineering with this video on 3-axis roughing in CNC machining. We dive into the intricacies of 3-axis roughing, a fundamental technique that forms the backbone of modern machining processes. Learn about the strategies and tools, behind this method, designed to efficiently remove material and pave the way for intricate designs and discover how 3-axis roughing optimizes productivity, enhances tool life, and transforms raw materials into refined masterpieces.
Deep dive into Fusion 360's machining fundamentals - https://autode.sk/3JJXHho