Joshua Bardwell | Your drone racing club NEEDS this FPV lap timer! // NUCLEARHAZARD @JoshuaBardwell | Uploaded 8 months ago | Updated 2 hours ago
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: fpvknowitall.com/support-me
---
The entire project is at: nuclearquads.github.io
Buy complete pre-assembled lap timer: etsy.com/listing/1604979429/nuclearhazard-complete-fpv-event-timer
Buy the "base" timing kit (mainboard and fan): nuclearquads.etsy.com/listing/1428199972/pre-order-nuclearhazard-rotorhazard
Buy the receiver modules (one per channel you want to monitor, up to 8x): nuclearquads.etsy.com/listing/1452495470/pre-order-rx5808-for-nuclearhazard-timer
Buy the case (if you don't want to print your own): nuclearquads.etsy.com/listing/1475957785/pre-order-case-for-nuclearhazard-timer
---
00:00:00 - The easiest way to build an event-worthy FPV lap timer
00:02:28 - Where to buy this
00:03:49 - Mount the mainbaord in the case
00:05:16 - Insert the RX5808 receiver modules
00:07:11 - The Raspberry Pi
00:09:18 - Install the fan on the lid
00:11:36 - Install the Raspberry Pi OS on the SD card
00:15:10 - Boot up the Raspberry Pi
00:16:13 - Connect to the RotorHazard with SSH
Download PuTTY at: putty.org
00:17:45 - Install the RotorHazard Install Manager
github.com/RotorHazard/RH_Install-Manager
00:20:15 - Install and configure the RotorHazard server
00:23:05 - Configure auto-wifi-hotspot on the server
00:23:58 - Set up port forwarding for easy access
Instructions are at: github.com/RotorHazard/RotorHazard/blob/main/doc/Software%20Setup.md#enable-port-forwarding
00:24:38 - Set up server to auto-run on powerup
Instructions for setup: github.com/RotorHazard/RotorHazard/blob/main/doc/Software%20Setup.md#start-on-boot
00:27:40 - Reboot the server and test it out!
00:28:12 - Rotorhazard deserves a whole video of its own!
FPVSim Timer: youtube.com/watch?v=0QSqufnOzbs
LiveTime walk-through: youtube.com/watch?v=HB1DerY0Cyw
Uncertain about what to buy? Check out THE ULTIMATE FPV SHOPPING LIST: fpvknowitall.com/ultimate-fpv-shopping-list
SUPPORT ME ON PATREON at: http://bit.ly/2Ep5Sia
THIS IS MY FULL TIME JOB. Here are other ways that you can support me: fpvknowitall.com/support-me
---
The entire project is at: nuclearquads.github.io
Buy complete pre-assembled lap timer: etsy.com/listing/1604979429/nuclearhazard-complete-fpv-event-timer
Buy the "base" timing kit (mainboard and fan): nuclearquads.etsy.com/listing/1428199972/pre-order-nuclearhazard-rotorhazard
Buy the receiver modules (one per channel you want to monitor, up to 8x): nuclearquads.etsy.com/listing/1452495470/pre-order-rx5808-for-nuclearhazard-timer
Buy the case (if you don't want to print your own): nuclearquads.etsy.com/listing/1475957785/pre-order-case-for-nuclearhazard-timer
---
00:00:00 - The easiest way to build an event-worthy FPV lap timer
00:02:28 - Where to buy this
00:03:49 - Mount the mainbaord in the case
00:05:16 - Insert the RX5808 receiver modules
00:07:11 - The Raspberry Pi
00:09:18 - Install the fan on the lid
00:11:36 - Install the Raspberry Pi OS on the SD card
00:15:10 - Boot up the Raspberry Pi
00:16:13 - Connect to the RotorHazard with SSH
Download PuTTY at: putty.org
00:17:45 - Install the RotorHazard Install Manager
github.com/RotorHazard/RH_Install-Manager
00:20:15 - Install and configure the RotorHazard server
00:23:05 - Configure auto-wifi-hotspot on the server
00:23:58 - Set up port forwarding for easy access
Instructions are at: github.com/RotorHazard/RotorHazard/blob/main/doc/Software%20Setup.md#enable-port-forwarding
00:24:38 - Set up server to auto-run on powerup
Instructions for setup: github.com/RotorHazard/RotorHazard/blob/main/doc/Software%20Setup.md#start-on-boot
00:27:40 - Reboot the server and test it out!
00:28:12 - Rotorhazard deserves a whole video of its own!
FPVSim Timer: youtube.com/watch?v=0QSqufnOzbs
LiveTime walk-through: youtube.com/watch?v=HB1DerY0Cyw