Uploaded April 2026 | Updated September 2026, 1 week ago
If your CNC sounds like it’s screaming at you… something’s wrong.
In this video, we break down exactly how to fix bad feeds and speeds on a desktop CNC machine. From awful squealing and chatter to powdery dust instead of proper chips, you’ll learn how to diagnose what your machine is telling you—and how to fix it step by step.
We walk through real testing using multiple IDC Woodcraft bits, adjusting spindle speed, feed rate, and depth of cut one variable at a time. You’ll see how each change affects chip load, sound, and machine performance so you can dial in your own setup with confidence.
This is especially important if you’re using a smaller desktop CNC, because standard feeds and speeds often don’t translate well from larger machines.
If you’ve ever wondered why your cuts sound terrible or don’t look right, this video will help you understand what’s going on—and how to fix it.
__________________________________
ROUTER BITS FOR CNC ROUTERS
- 12pc Complete CNC Router Bit Starter Set → idcwoodcraft.com/11P-SET-W
- 6pc Essentials CNC Router Bit Starter Set → idcwoodcraft.com/6P-SET
- 1” Ultra-Smooth Cutting Surfacing Bit → idcwoodcraft.com/SU-10
- 1/8" Compression Bit → idcwoodcraft.com/CM-18
- 1/8" Downcut Bit → idcwoodcraft.com/DC-18
- Other bits: IDC Woodcraft Website → idcwoodcraft.com
-----------------------------------------------------
IDC Woodcraft Mobile App (FREE)
- Apple → link.idcwoodcraft.com/vax4kc
- Android → link.idcwoodcraft.com/32hhz5
-----------------------------------------------------
IDC Woodcraft Router Bit Database
idcwoodcraft.com/pages/database-downloads
-----------------------------------------------------
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
- Calipers → link.idcwoodcraft.com/vp2a3e
- Sanding/Buffing Brushes → link.idcwoodcraft.com/u01ge2
- CA Glue - 10% Off with Code: "IDC WOODCRAFT": link.idcwoodcraft.com/5fj21e
------------------------------------------------------
RECOMMENDED DESIGN SOFTWARE
- Vcarve Pro (RECOMMENDED) → link.idcwoodcraft.com/c19df4
- Vcarve Desktop → link.idcwoodcraft.com/63mso5
- Vectric Aspire → link.idcwoodcraft.com/7zfwyp
- Cut2D Desktop → vectric.com/products/cut2d/?ref=idcwoodcraft
- CarveCo 5% OFF with code IDCWOODCRAFT → http://carv.eco/buy
-----------------------------------------------------
COMPLETE VECTRIC SOFTWARE TRAINING → academy.learnyourcnc.com/a/2147507626/CqkFCPi3
CARVECO ACADEMY → link.idcwoodcraft.com/50ly2q
----------------------------------------------------
GSENDER CNC CONTROL → sienci.com/gsender/?ref=IDCWOODCRAFT
----------------------------------------------------
CNC RESOURCES
- CNC Set Up Checklist → link.idcwoodcraft.com/xi8r0n
- Ultimate CNC Router Buyer’s Guide → link.idcwoodcraft.com/xxakuh
- Machine Setup Checklist → link.idcwoodcraft.com/yz5k2m
-----------------------------------------------------
RECOMMENDED CNC ROUTERS
- Altmill CNC Router → link.idcwoodcraft.com/k0ecg7
- Longmill CNC Router → link.idcwoodcraft.com/a0x8z9
---------------------------------------------
CNC ENTREPRENEURS Facebook Group → facebook.com/groups/cncentrepreneurs
------------------------------------------------------
CNC Insiders (free files and more) → idcwoodcraft.com/cnc-lp2-free-files
------------------------------------------------------
SUPPORT THE CHANNEL → buymeacoffee.com/garrettfromme
------------------------------------------------------
PODCASTS → https://anchor.fm/cnc-for-beginners
------------------------------------------------------
Email: garrett@idcwoodcraft.com
#cnc #cncrouters #cncforbeginners #idcwoodcraft #vcarvetutorials #vectric
----------------------------------------------------
Cool vector files for CNC router & CNC laser → etsy.me/3oxX79l
00:00:09 The problem: terrible squeal and chatter
00:00:43 Signs of bad feeds and speeds (dust, rubbing, movement)
00:01:15 Why your machine is rejecting settings
00:01:52 Test setup and tools being used
00:02:30 Step 1: adjusting spindle speed (RPM)
00:05:09 Iterating RPM changes and observing results
00:06:34 Switching focus to chip load and feed rate
00:07:27 Adjusting depth of cut for better chips
00:11:07 Moving to surfacing bit and new challenges
00:15:50 Discovering the real issue (tramming vs feeds & speeds)
#cncfeedsandspeeds
#cnctips
#cncwoodworking
#cncforbeginners
#cncchatter
#cnctraining
#cnctroubleshooting
#chipload
#desktopcnc
#cncmistakes
If your CNC sounds like it’s screaming at you… something’s wrong.
In this video, we break down exactly how to fix bad feeds and speeds on a desktop CNC machine. From awful squealing and chatter to powdery dust instead of proper chips, you’ll learn how to diagnose what your machine is telling you—and how to fix it step by step.
We walk through real testing using multiple IDC Woodcraft bits, adjusting spindle speed, feed rate, and depth of cut one variable at a time. You’ll see how each change affects chip load, sound, and machine performance so you can dial in your own setup with confidence.
This is especially important if you’re using a smaller desktop CNC, because standard feeds and speeds often don’t translate well from larger machines.
If you’ve ever wondered why your cuts sound terrible or don’t look right, this video will help you understand what’s going on—and how to fix it.
__________________________________
ROUTER BITS FOR CNC ROUTERS
- 12pc Complete CNC Router Bit Starter Set → idcwoodcraft.com/11P-SET-W
- 6pc Essentials CNC Router Bit Starter Set → idcwoodcraft.com/6P-SET
- 1” Ultra-Smooth Cutting Surfacing Bit → idcwoodcraft.com/SU-10
- 1/8" Compression Bit → idcwoodcraft.com/CM-18
- 1/8" Downcut Bit → idcwoodcraft.com/DC-18
- Other bits: IDC Woodcraft Website → idcwoodcraft.com
-----------------------------------------------------
IDC Woodcraft Mobile App (FREE)
- Apple → link.idcwoodcraft.com/vax4kc
- Android → link.idcwoodcraft.com/32hhz5
-----------------------------------------------------
IDC Woodcraft Router Bit Database
idcwoodcraft.com/pages/database-downloads
-----------------------------------------------------
OTHER ‘MUST HAVES’ FOR CNC ROUTERS
- Calipers → link.idcwoodcraft.com/vp2a3e
- Sanding/Buffing Brushes → link.idcwoodcraft.com/u01ge2
- CA Glue - 10% Off with Code: "IDC WOODCRAFT": link.idcwoodcraft.com/5fj21e
------------------------------------------------------
RECOMMENDED DESIGN SOFTWARE
- Vcarve Pro (RECOMMENDED) → link.idcwoodcraft.com/c19df4
- Vcarve Desktop → link.idcwoodcraft.com/63mso5
- Vectric Aspire → link.idcwoodcraft.com/7zfwyp
- Cut2D Desktop → vectric.com/products/cut2d/?ref=idcwoodcraft
- CarveCo 5% OFF with code IDCWOODCRAFT → http://carv.eco/buy
-----------------------------------------------------
COMPLETE VECTRIC SOFTWARE TRAINING → academy.learnyourcnc.com/a/2147507626/CqkFCPi3
CARVECO ACADEMY → link.idcwoodcraft.com/50ly2q
----------------------------------------------------
GSENDER CNC CONTROL → sienci.com/gsender/?ref=IDCWOODCRAFT
----------------------------------------------------
CNC RESOURCES
- CNC Set Up Checklist → link.idcwoodcraft.com/xi8r0n
- Ultimate CNC Router Buyer’s Guide → link.idcwoodcraft.com/xxakuh
- Machine Setup Checklist → link.idcwoodcraft.com/yz5k2m
-----------------------------------------------------
RECOMMENDED CNC ROUTERS
- Altmill CNC Router → link.idcwoodcraft.com/k0ecg7
- Longmill CNC Router → link.idcwoodcraft.com/a0x8z9
---------------------------------------------
CNC ENTREPRENEURS Facebook Group → facebook.com/groups/cncentrepreneurs
------------------------------------------------------
CNC Insiders (free files and more) → idcwoodcraft.com/cnc-lp2-free-files
------------------------------------------------------
SUPPORT THE CHANNEL → buymeacoffee.com/garrettfromme
------------------------------------------------------
PODCASTS → https://anchor.fm/cnc-for-beginners
------------------------------------------------------
Email: garrett@idcwoodcraft.com
#cnc #cncrouters #cncforbeginners #idcwoodcraft #vcarvetutorials #vectric
----------------------------------------------------
Cool vector files for CNC router & CNC laser → etsy.me/3oxX79l
00:00:09 The problem: terrible squeal and chatter
00:00:43 Signs of bad feeds and speeds (dust, rubbing, movement)
00:01:15 Why your machine is rejecting settings
00:01:52 Test setup and tools being used
00:02:30 Step 1: adjusting spindle speed (RPM)
00:05:09 Iterating RPM changes and observing results
00:06:34 Switching focus to chip load and feed rate
00:07:27 Adjusting depth of cut for better chips
00:11:07 Moving to surfacing bit and new challenges
00:15:50 Discovering the real issue (tramming vs feeds & speeds)
#cncfeedsandspeeds
#cnctips
#cncwoodworking
#cncforbeginners
#cncchatter
#cnctraining
#cnctroubleshooting
#chipload
#desktopcnc
#cncmistakes
