Uploaded November 2024 | Updated November 2026, 3 hours ago
This EV converted VW Bus came to me with major reliability problems. Basically any time it left the driveway it left the owner stranded.
I fixed a bunch of things so far but this horrible lingering Lithium smell was the worst. I think I found the culprit: a cell that was at absolutely zero volts!
Procedure was: take the parallel connectors off and measure the voltage in each of the 90 cells. Since this is such a TEDIOUS process I made a video so later-me could go thru and log to a spreadsheet. This worked quite well.
RUNNING WITH NO BMS IS A BAD IDEA! You don't know if your pack is out of balance, or even worse a cell is completely dead and taking down the rest of your pack.
PARALLEL CELLS LIKE THIS IS A BAD IDEA: the bad cell will take out the entire strand, and the imbalances are very hard to see. You would need (3) 30s BMS setups to read all the cells.
Long term recommendation is to change out the parallel strings of (3) 30s cells in parallel and go to 4 Tesla battery modules, with BMS and greater reliability.
Short term I will replace the bad LEAF module and put in a replacement. This will let the owner limp along until he comes up with the funds for a full upgrade.
This EV converted VW Bus came to me with major reliability problems. Basically any time it left the driveway it left the owner stranded.
I fixed a bunch of things so far but this horrible lingering Lithium smell was the worst. I think I found the culprit: a cell that was at absolutely zero volts!
Procedure was: take the parallel connectors off and measure the voltage in each of the 90 cells. Since this is such a TEDIOUS process I made a video so later-me could go thru and log to a spreadsheet. This worked quite well.
RUNNING WITH NO BMS IS A BAD IDEA! You don't know if your pack is out of balance, or even worse a cell is completely dead and taking down the rest of your pack.
PARALLEL CELLS LIKE THIS IS A BAD IDEA: the bad cell will take out the entire strand, and the imbalances are very hard to see. You would need (3) 30s BMS setups to read all the cells.
Long term recommendation is to change out the parallel strings of (3) 30s cells in parallel and go to 4 Tesla battery modules, with BMS and greater reliability.
Short term I will replace the bad LEAF module and put in a replacement. This will let the owner limp along until he comes up with the funds for a full upgrade.










