Yeastar TA100 detailed look at, setup and testing. @freename
Yeastar TA100 detailed look at, setup and testing.  @freename
Uploaded January 2025 | Updated November 2026, 2 hours ago
A detailed look at the Yeastar TA100 VoIP SIP ATA.
Includes what is in the box, a look at the device.
A look at the power supply, connecting the device up.
Then the web admin interface and initial configuration.
Includes almost every page of the web admin interface which may be helpful for anyone trying to support or talk through someone making changes on their device.

Other Videos:
youtu.be/-PXhBcasJzI - How to factory reset the TA100 using the phone handset

00:00 Introduction and first look at the device.
01:48 A look at the paper manual / quick start guide.
02:25 Plugging the ATA in for the first time.
03:45 Using the phone to find the IP address of the TA100.
04:27 Opening the web admin interface using a browser on a laptop.
04:55 Testing the ATAs ability to detect if a phone is plugged into the FXS port.
05:51 The Network Status, System Info, Call Logs, System Logs and Packet Tool screens.
06:42 The system LAN Settings screen.
07:00 Service Screen to enable, SSH, HTTPS and FTP.
07:08 VLAN setttings.
07:14 OpenVPN VPN settings.
07:21 Web Admin Interface Password change screen.
07:25 Date and Time / NTP settings. (Note that on my firmware NTP did not appear to function correctly and the date never automatically updated.)
08:03 Auto Provisioning Settings.
08:12 Firmware update / Firmware upload screen.
08:18 Backup and Restore Settings screen. (Download and upload configuration from the device, restore older configuration backups).
08:24 Remotely reboot and remotely factory reset the TA100 via the web interface.
09:53 How to change the IP of the TA100 an set it to static IP mode.
11:29 How to configure your SIP provider service onto the Yeastar TA100 ATA.
12:25 The SIP account Advanced settings screen (anti-idle / keepalive settings, call waiting and audio codecs).
13:01 FXS settings such as audio volume for inbound and outbound, echo cancellation and hook / flash timer.
14:53 Gateway Settings, Basic Preferences (Music on hold, # to submit key, enable or disable call logs, three way calling and jitter buffer options).
15:17 Music On Hold upload screen.
15:32 Voice Message Prompts upload screen (System Prompts).
16:01 Global Advanced, SIP Settings (UDP ports to use, TLS verification, RTP port rangse timeouts and retry settings.).
16:10 SIP NAT settings (STUN, RTP re-invite, external IP hard coded setting etc.).
16:26 Advanced SIP Advanced Settings Tab (caller ID field selection, DID field for inbound matching, 180 ringing notification, allow guest (spam SIP calls!) and other advanced options.).
16:30 Distinctive Ringtones (match inbound caller IDs and make the phone ring differently, probably doesn't work for DECT phones, only corded analogue phones).
16:38 Tone Zone Settings (regional audio indication settings such as dialtone noise, ringing sounds etc.).
Yeastar TA100 detailed look at, setup and testing.A look at the TalkTalk Sagemcom WiFi Hub 3 as shipped May 2025.The Vodafone Power Hub as shipped in 2025A detailed look at a RangeXTD USB-WiFi RepeaterReplacing the screen on a HP 250 G2 Laptop / F0Y94EA#ABU LaptopThe Mercusys Halo H70X App. Going through every page.How to upgrade or replace the hard disk in an HP Notebook 15-ac121na N7J56EA#ABU Laptop.How to factory reset a tp-link Archer C6 WiFi router.How to factory reset a RangeXTD USB-WiFi RepeaterThe BT 301C Mole Phone Line Test unitHow to factory reset tp-link Deco M5V3 WiFi Mesh RouterThe night my house nearly caught fire..
icannotgetafreename |

Yeastar TA100 detailed look at, setup and testing.

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER