Kristian Blåsol
The Bread Bed - Modular prototyping - Modular in a Week
updated
I will keep you posted when I know I/we (Europe) can send stuff again and if it will affect prices in any way. 🤷♂️😏
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
So with some "tricks" of using the binary way of counting this blind panel can be broken into any size between 1 and 20 HP. The bits that are left over can ofcourse be used aswell...
BUT it is boring, it is black with just "modular in a week" written on them. If you are a designer/artist that have an idea what it should look like, then take a look in this Dropbox folder download the material and get back to me and we will try to make it happen :)
dropbox.com/scl/fo/u7lx91sxpeubpycrdlmxg/AJW0mEbQpSwN2RqAGlVRtmM?rlkey=luss0aazb6b8yd6jqj4mmfz8h&dl=0
If you just want one, the boring one is 6$ and you can buy it here: tindie.com/products/Sourcery/1-20hp-blind-panel
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
As a side note (which is the most cool thing in the video...) someone asked on the discord if the Twigs firmware for Branches worked on the Grenar. Twigs is an independently made firmware for the Branches, which turns it into a VC factor/VC swing module instead. And it does work! The user Twig (not affiliated with Twigs firmware (I know, super confusing) helped me (again) to make this firmware work with old bootloader arduino nanos aswell, you can find the hex files for both versions on my github, but also check out the repo for Twigs here: github.com/arirusso/twigs
So I also show off what this cool firmware does, and then I made a new front plate specially designed for this firmware. Because there is a lot of information changed for what the controls do. You can buy the front panel in my shop: tindie.com/products/Sourcery/grenar-a-throughhole-version-of-the-mi-branches
Or download the Gerber files on my Github: github.com/SourceryOne/Grenar
I will also attend Dutch Modular Fest! Finally I get to go out there in the world and actually meet some of you :) Maybe see you there? 6 september in Rotterdam! Read more here: dutchmodularfest.com
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
It is built around an Arduino Nano, and uses Dual PWM for 16 bit resolution on the output CV signal.
0:45 Intro
8:08 Control Overview
11:24 Channel select
11:51 Act
14:58 Catch the pots
17:18 Load & Save
19:00 Shape menu
24:33 Length menu
26:34 Advanced menus (Mode and Functions)
27:08 Module Modes
29:42 Functions menu
30:15 CV Input control
32:30 End Of...
34:26 Using EndOf with CV input for some self patching.
36:55 nLoop, n, nDecay and how it works
43:10 Patch/sound examples
46:56 Final thoughts
If you want to get one of these you can find it in my Tindie store here:
tindie.com/products/Sourcery/adsr
All the schematics and programfiles is here:
github.com/SourceryOne/Arduino-ADSR
And if you find a bug, please report it or let me know so I can fix it :)
And you can find it on ModularGrid here:
modulargrid.com/e/miaw-adsr
Hardware features consists of:
Two gate/trigger inputs where input 2 doubles as a CV-input.
Four backlit transparent pots that shows which phase of the envelope you are in. These are used for both channels, and also for changing parameters.
Two outputs with intenuverters, making it possible to attenuate the output signal between 0-8V or output an inverted signal between 0 and -8V.
Manual trig buttons for both channels
Four meny buttons for setting parameters.
Software features consists of:
Two independent ADSRs internally routable.
Four ways the ADSRs act on the input, Gate (ADSR), Trig (ADR), Loop (ADR Looping), and nLoop (ADR looping with a twist).
Load and Save of the state of the Module to easily continue after powering the modular down.
Shape, tune the shape of each phase of the envelope between Exponential (fast start, slow end) through Linear to Logarithmic (slow start, fast end)
Length, each pot for each phase of the envelope can be set to have a working are of either 1s, 10s or 100s (settable in software) for reeeeaaaally long envelopes.
There are also some more experimental features that works but maybe not flawlessly yet... ;) Some of them are:
Modes, for routing the ADSRs internally to outputs. eg. ADSR1 on both outputs. Input 1 triggers both ADSRs, etc etc.
CV control, makes input 2 to a CV input that can control one of the parameters of the first channel (A, D, S or R).
EO (End Of...) you can set which phase the EO on channel 1 should trigger the Envelope on channel 2.
nLoop, is a loop that either loops as long as the gate is held, or can be set to a specific number of loops (n) that it will loop.
nLoopDecay, in nLoop you can have the amplitude of the envelope to decay over time.
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
This is the build video for the ADSR if you bought a pcb/panel set or a complete kit from my store.
A good companion to follow along with to make sure your build is correct.
If you are interested and want to build one yourself, you can buy a kit here: tindie.com/products/Sourcery/adsr
All the documentation can be found here: github.com/SourceryOne/Arduino-ADSR
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
You can find the new firmware here: github.com/SourceryOne/Arduino-Sample-and-Hold
Download the SITH folder and open the SITH.ino and all the other files should follow along, and just upload to your Arduino.
The modes are:
1. Sample or Track and Hold (S|TH) - Main function (not covered in this video)
6:11 2. Random Gates - like half a branches with only one input and one output.
7:02 3. Sample and Slide - Like S&H but instead it slides between the values.
10:26 4. LFO & Hold - An LFO with adjustable edges that you can Hold.
12:13 5. AD Envelope - A simple AD envelope generator.
13:12 6. Percussive Noise - Meant to be a hihat, but is probably more of a Snare or clap sound. Very 80's game bomb and gunshot kindof noises. With Decay and Sample Reduction.
14:50 6b. An extra "feature" is that the Percussive Noise can be used as a LoFi VCA if used with the input signal instead of internal noise, but only with Decay, and still with Sample Reduction for some gritty sounds.
Let me know if you come up with more ideas for functions that could work on this module. Either in the comments or on the discord channel. :)
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
The third patch of three generative or selfplaying patches I made while also reconfiguring my Modular and making improvements to the build.
The name is taken from the two Braids being quantized, one in Lydian and one in Dorian. A more slow patch than the previous two. Using about the same modules as the previous patch, adding another Braids.
The downside of just having one output from the modular into the DAW is that I cant mix the signal afterwards... The bass line is a bit too loud compared to the higher melody.
All modules except the DSP100 which is still (yes still....) a work in progress can be found in my tindie store as either a PCB-kit or a full kit.
tindie.com/stores/Sourcery
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
The second of three generative or selfplaying patches I made while also reconfiguring my Modular and making improvements to the build.
A simple Generative modular patch using the four modules from the previous patch, adding a few more modules, the Marbles and another VCO.
The modules used are:
1. The Beaks used as an LFO to clock the SITH.
youtube.com/watch?v=UQ76YSmVNnw&pp=ygUXbW9kdWxhciBpbiBhIHdlZWsgYmVha3M%3D
2. The SITH Sample and hold is then tightly set to a small voltage range that are sent to the Braids.
youtube.com/watch?v=BoewbbyEvRc&pp=ygUWbW9kdWxhciBpbiBhIHdlZWsgc2l0aA%3D%3D
3. The Braids uses the Fold wave, with Quantizer on to play the melody.
youtube.com/watch?v=EpqNQiMcVl8&t=54s&pp=ygUYbW9kdWxhciBpbiBhIHdlZWsgYnJhaWRz
4. The melody is then finally patched into the DSP100 effects uning with Patch 49 (Cathedral).
youtube.com/watch?v=bx86xCCJ9yw&pp=ygUXbW9kdWxhciBpbiBhIHdlZWsgZHNwOTk%3D
5. The SITH also feed the Marbles, which plays the bass melody
6. That melody is played on David Haillants VCO1: tindie.com/products/dhaillant/simple-vco
7. And finally the VCO is patched through the Korg35 VCF
youtube.com/watch?v=1sEPNks2X7Y&pp=ygUYbW9kdWxhciBpbiBhIHdlZWsga29yZzM10gcJCY0JAYcqIYzv
8. which is CV controlled with my newest (soon done...) Arduino ADSR Module.
youtube.com/watch?v=niUUW0zIc54&t=118s&pp=ygUWbW9kdWxhciBpbiBhIHdlZWsgYWRzcg%3D%3D
All modules except the DSP100 which is still (yes still....) a work in progress and the Marbles (which was a collab on the Discord server), can be found in my tindie store as either a PCB-kit or a full kit.
tindie.com/stores/Sourcery
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
One of three generative or selfplaying patches I made while also reconfiguring my Modular and making improvements to the build.
A simple Generative modular patch using four modules (not counting the mixer just to pass one signal to the DAW).
The modules used are:
1. The Beaks used as an LFO to clock the SITH.
youtube.com/watch?v=UQ76YSmVNnw&pp=ygUXbW9kdWxhciBpbiBhIHdlZWsgYmVha3M%3D
2. The SITH Sample and hold is then tightly set to a small voltage range that are sent to the Braids.
youtube.com/watch?v=BoewbbyEvRc&pp=ygUWbW9kdWxhciBpbiBhIHdlZWsgc2l0aA%3D%3D
3. The Braids uses the Fold wave, with Quantizer on to play the melody.
youtube.com/watch?v=EpqNQiMcVl8&t=54s&pp=ygUYbW9kdWxhciBpbiBhIHdlZWsgYnJhaWRz
4. The melody is then finally patched into the DSP100 effects uning with Patch 49 (Cathedral).
youtube.com/watch?v=bx86xCCJ9yw&pp=ygUXbW9kdWxhciBpbiBhIHdlZWsgZHNwOTk%3D
All modules except the DSP100 which is still (yes still....) a work in progress can be found in my tindie store as either a PCB-kit or a full kit.
tindie.com/stores/Sourcery
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
You can find this module in my store:
tindie.com/products/Sourcery/linkz-a-throughhole-version-of-the-mi-links
Or you can download all the files from my GitHub and order the PCBs and components yourself here:
github.com/SourceryOne/Linkz
ALSO you can now find all my modules on Modular Grid, find this module here:
modulargrid.com/e/miaw-linkz
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
tindie.com/products/38096
Or you can download all the files and order your own pcbs and components here:
github.com/SourceryOne/Linkz
This is the build instructions for the Linkz, a throughhole version of Mutable Instruments Links module. The video is in "realtime" so you can build along with me in a slow pace, which takes about an hour to finish the module including testing. There are instructions for using a throughhole TL074 or for using ONE SMD component which wasnt available as a throughhole version the OPA4171.
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
The real culprit is a Zener diode that has the wrong characteristics, and does not work well in these modules.
So in this video you will see me fix these problems, removing the old zener and replacing it with a new one. Also replacing one resistor.
The part numbers of the zeners are:
BZX55C3V6 for the 3.6V zener diode used in the Beaks, and
BZX55C5V1 for the 5.1V zener diode used in the Gris and Grenar. Although I have not tried it on Grenar as it is working with my workaround.
Again these are free in my shop but I cant pay for shipping, but if you intend to buy anything from me, just write me a note of how many of these components to add to the package for free :)
Sorry again...
Link to the same desoldering pump tool I use in the video: https://s.click.aliexpress.com/e/_okjxUKX
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
This is a first video that maybe shows more my work flow from idea on paper to the prototype PCB ordered from the factory. This video has been lying on my computer a long time, so programming on the module has been going on and you might have seen some shorts showing it off... Stay tuned for part 2 to hear it in most of its glory ;)
I would love to know if there are any features I have forgotten?
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
Here is the link to the Simulation, that also works as a schematics for making the circuit: tinyurl.com/27djczof
Watch the two previous videos here:
Part 1: How dual PWM works. youtu.be/eI9HEukHXsk
Part 2: Faster PWM-speeds on the Arduino. youtu.be/QulZIqAJk54
With this I can go back to actually do a modular project again! Next step is to take this information and make an ADSR... :)
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
This is the second video about how DualPWM works, where the first video I showed how it works, and in this video we dive deeper into how to configure the Arduino to get a better analog signal out. We do this by speeding up the PWM frequency outside of the hearable range with register manipulation, and by tuning the resistors for the two pwm outputs so there is a good ratio between the two. In the next video I will show how to filter the signal to get the final actual analog output.
Cheat Sheet for setting the TCCRnA/B registers: docs.google.com/spreadsheets/d/1C0q_IB5QaT36SNPkw4a2zEetK-U1r_IYP37szSlvJeU/edit?usp=sharing
The simple code with a lot of comments:
github.com/SourceryOne/PWM-register-manipulation/blob/main/dual_pwm_register_manipulation.ino
Secrets of Arduino PWM: docs.arduino.cc/tutorials/generic/secrets-of-arduino-pwm
AtMega328P Datasheet: ww1.microchip.com/downloads/en/DeviceDoc/Atmel-7810-Automotive-Microcontrollers-ATmega328P_Datasheet.pdf
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
(this is a reupload without the background patch playing)
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
The third and final video about the SITH DIY Sample and Hold module. I explain the last change, and then go through the fun stuff I have figured out you can do with it.
If you are interested you can find all information about it below, or buy pcbs or a whole kit in my tindiestore, also below.
If you figure out some fun secondary function let me know, or even better add the code to the github. :)
Github link to the project:
github.com/SourceryOne/Arduino-Sample-and-Hold
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Direct link to this product:
tindie.com/products/Sourcery/sth-sith-sample-or-track-and-hold
You can get an Arduino nano from this link for less than 3$ I picked the "Nano Blue" color.
https://s.click.aliexpress.com/e/_DlbhLa5
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
The github with all the resources needed: github.com/SourceryOne/Arduino-Sample-and-Hold
The tindie store link if you wanna buy it: tindie.com/products/34544
Link to a cheap Arduino clone (needed): https://s.click.aliexpress.com/e/_DlbhLa5 (I picked the Nano Blue color)
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
You can find the files for this project here:
github.com/SourceryOne/Arduino-Sample-and-Hold
If you havent already you might want to check out these two videos which are important for context of this video:
10bit output: youtu.be/IoJasVtr0OA
Arduino S&H part 1: youtu.be/7Mhq-GJlMeM
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
Support my work by becoming a Patreon:
patreon.com/SourceryOne
You can listen to more about the module here:
youtu.be/7Mhq-GJlMeM
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
In this video I build the framework of a sample and hold, and go through all the "features" I'd like in the module, I also code a noise source, and a software "lowpass" and "highpass" filter...
Check out the code and more on my Github:
github.com/SourceryOne/Arduino-Sample-and-Hold
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
A video with lots of tinkering and explaining concepts, and not so much modular fun ;)
Read the article about port manipulation that I refer to in this video:
deepbluembedded.com/arduino-port-manipulation-registers-example
The image that I used to describe the R/2R DAC can be seen here along with some more info on how it works:
allaboutcircuits.com/textbook/digital/chpt-13/r-2r-dac
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
Finally managed to get at least one Jamuari in this year :)
I made a "new" filter module that gave me some inspiration and a really nice bass in this patch. The VCO is the Braids with the BOW of all voices. Filter is controlled by an ADSR from the Beaks and a slow moving LFO giving it a little bit of life. A hi hat from the second channel of the Beaks. Loads of reverb with loads of feedback, and then some melody on a detuned Volca Keys. No Bassdrum because my clock divider is not "musical" discussed in earlier videos....
Enjoy!
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
Also how much components does it take to sell a few kits on Tindie?
To see how my studio is supposed to look and work check out this video from two years ago before I "moved out":
youtube.com/watch?v=mXzEn8T_QUo&t=2s&pp=ygUac291cmNlcnkgZmluYWwgc3R1ZGlvIHRvdXI%3D
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
This is kindof an old Anything Arduino video, but also has some use in Modular in a Week... so... hehe, where should I put this :D
Link to the sketch file: dropbox.com/scl/fi/kuuhynhxr8i4if6e5u35b/595_16_led_timer_test.ino?rlkey=ap95bpsubvfb61ot0kae10gjz&dl=0
Link to the falstad simulation: tinyurl.com/ypd98rb4
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
Here you can find an affordable Arduino Nano for use in your projects: https://s.click.aliexpress.com/e/_DEGcpIN
This is all in regards to my modular building journey which you can watch more of below.
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
Or get all the files and schematics here and source it yourself:
github.com/SourceryOne/Grenar/tree/main
Watch the video about this module if you havent already here:
youtube.com/watch?v=t9voys-Swdw&ab_channel=KristianBl%C3%A5sol
Here is a quick video that shows how to get the .HEX file onto the Arduino Nano:
youtu.be/VhN1RtcyU-E
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
My Tindie store:
tindie.com/stores/Sourcery
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
You can find this module in my Tindie store along with previous modules:
tindie.com/stores/Sourcery
Sites and resources mentioned in this video:
The Branches Manual from Mutable Instruments:
pichenettes.github.io/mutable-instruments-documentation/modules/branches/manual
Github for the Grenar, with Schematics, Gerbers, and Arduino Nano prepared HEX file:
github.com/SourceryOne/Grenar/tree/main
Joe Seggiolas "Forks" TH version which adds a few functions to the panel and software:
github.com/joeSeggiola/arduino-eurorack-projects/tree/master/forks
The original schematics in PDF-format:
bgr360.github.io/assets/pdf/mutable_instruments/branches_v40.pdf
Someone selling the original PCB if you want to go the SMD route:
amazingsynth.com/branches-pcb
Here is a quick video that shows how to get the .HEX file onto the Arduino Nano:
youtu.be/VhN1RtcyU-E
Here is a link to some affordable Arduino nano clones that worked for me:
https://s.click.aliexpress.com/e/_DEGcpIN
Modular in a Week playlist:
youtube.com/playlist?list=PLyE56WXw0_5Q5QGMEXWmskuhojKyRdA3T
Support my work by becoming a Patreon:
patreon.com/SourceryOne
Join the discussion on the Discord server: discord.gg/pZtVheVCTW
The soldering video for the Grenar you can find here: youtu.be/qQuWpthCDKk


