I Built a Rocket Stove From Scrap Metal (Off-Grid & Camping Use) Cut Weld N Grind 2026-09-18 | I Built a Rocket Stove From Scrap Metal (Off-Grid & Camping Use)
How to build the ultimate diamond plated rocket stove for outdoor cooking with the ARCCAPTAIN mig200 Cut Weld N Grind 2024-05-16 | How to build the ultimate diamond plated rocket stove for outdoor cooking with the ARCCAPTAIN mig200Here is a weekend project that I built. This rocket stove is made from diamond plate and was welded with my Arccaptain Mig 200. I plan on using these rocket stove for outdoor cooking on my remote piece of land.Arccaptain MIG200arccaptain.com/products/mig200-200amp-multi-process-synergic-mig-welding-machine
Reviewing and unboxing The Best Vevor 800w Solar Street Light With 1400lm Motion Sensor #vevor Cut Weld N Grind 2024-05-11 | Unboxing and review of the Vevor 800w solar street light 1400lm motion sensor #vevor This is a quick review and installation of the Vevor HB-TYNT-800w solar street light. I bought 4 of these lights and they have worked great for 2 months. I use the solar street lights for security and the motion sensor is awesome and detects about 40 feet away.Link to Vevor site.vevor.com/solar-street-light-c_11583/vevor-2pcs-800w-solar-street-light-1400lm-led-solar-flood-lights-outdoor-with-rf-remote-control-ip66-waterproof-security-solar-powered-motion-sensor-lamp-for-garden-yard-path-garage-parking-lot-p_010757721988Information for websiteExceptional LED Brightness: Our solar street light is equipped with ultra-bright OSRAM LED beads, delivering high-intensity illumination over a wide area. Illuminate your garden, parking lot, garage, pathways, and more with brilliant brightness.Efficient Solar Panels: Featuring extra-large milliampere-hour and high-wattage solar panels, our solar street lights outdoor provide extended power supply in a remarkably short time frame.Remote Control, Intelligent Mastery: Take full control of your solar flood lights outdoor with the convenience of a 30 m/1181 in remote control range and 360-degree no-blind-spot sensing. We provide four-level brightness adjustment and on/off control. Everything is at your fingertips.Durable & Waterproof: Crafted from high-strength PC/ABS materials, our street lights solar powered boast an IP66 waterproof rating. They can withstand rain, wind, snow, ice, and extreme temperatures, making them ideal for all your outdoor spaces.Installation Made Easy: No need for any electrical rewiring, junction boxes, or adapters. Just secure our solar street lights with screws on any exterior wall or post, and they're ready to use. Perfect for outdoor lighting in front entrances, courtyards, garages, driveways, gardens, and more.00:00 Unboxing01:32 Assemble and installation02:16 Testing light
Using the Crossfire CNC table and Hobart Champion to weld ranch entrance Cut Weld N Grind 2024-04-10 | Using the Crossfire CNC table and Hobart Champion to weld ranch entrance
My Honest Review & Unboxing Of The Vevor WBS 015 Bucket Hay Bale Spear Tractor Attachment Cut Weld N Grind 2024-04-07 | My Honest Review & Unboxing Of The Vevor Wbs 015 Bucket Hay Bale Spear Tractor Attachment.Today I got the opportunity to test and review a tractor attachment. The Attachment is made by Vevor and its the WBS-015. This bucket hay spear is a bucket clamp on design and made very well. The shipping and packaging were excellent and the product worked extremely well. I will post a link to Vevor so you can read more on this product.vevor.com/hay-spear-c_10966/vevor-39-hay-spear-bale-spears-1600lbs-loading-capacity-skid-steer-loader-tractor-bucket-attachment-with-2pcs-17-5-stabilizer-spears-and-60-chain-quick-attach-spike-forks-p_010561953722Information from Vevor WebsiteAbout this item1600 LBS High Load Capacity: VEVOR hay spear boasts an impressive 1600 lbs load capacity. With an enhanced 1.18" thread diameter, and 2.05" thread length, it ensures stability, even when dealing with large hay bales, preventing tipping.Premium Spring Steel: The bale spear shaft is crafted from high-strength spring steel material with a powder coating, making it robust, and resistant to bending, breakage, and corrosion. The 39" shaft effortlessly penetrates thick hay stacks, ensuring long-lasting durability.Universal Compatibility: Our hay bale spear is compatible with bucket skid steer loaders and tractors. The 60" extended chain that can fit various bucket sizes. Carefully measured for compatibility, you won't need to worry about it not fitting.Easy Installation: With fewer components and straightforward assembly, even beginners can install the tractor hay spears effortlessly. The included self-locking nuts and external hex screws secure the long spears. Additionally, it includes a chain tightener, chain, and U-shaped buckles for added security.Effortless Handling: Manual handling of hay is labor-intensive and time-consuming. With the VEVOR hay forks for tractor, you can efficiently move hay, greatly improving work efficiency. It's ideal for agricultural, landscaping, yard, and pasture applications, saving you time and effort.
Watch Me Weld Custom Chain Hooks Onto My Kubota Tractor Loader Bucket With ArcCaptain Mig200 Welder! Cut Weld N Grind 2024-04-03 | Watch Me Weld Custom Chain Hooks Onto My Kubota Tractor Loader Bucket With ArcCaptain Mig200 Welder!DIY welding chain hooks on Kubota tractor loader bucket with my ArcCaptain MIG200 welder.Here is a quick video on some weld on hooks I welded to a Kubota L2501 bucket. I usually build small flanges that bolt onto bucket which makes removal of bad hood easier. I used my Arccaptain Mig200 for this quick project. Use Coupon Code CUTWELDNGRIND for discount, I do get a small commission that is placed back into the channel. arccaptain.com/products/mig200-200amp-multi-process-synergic-mig-welding-machine
Diy Garden Bedder Hiller Project On A Budget: Testing It Out For The Weekend. Cut Weld N Grind 2024-03-17 | Diy Garden Bedder Hiller Project On A Budget: Testing It Out For The Weekend.Here is a video of my budget friendly garden bedder/ hiller I made last month. I was asked for a video of it being tested and here is a small clip I made. I still needed to do adjustments but worked great for the most part.
Installing a solar powered drip tape irrigation system with several 250 gallon IBC tanks. #growhoss Cut Weld N Grind 2024-03-16 | Installing a solar powered drip tape irrigation system using IBC 250 gallon tanks.I am finally getting to do an update on my drip tape irrigation system. GrowHoss and ebay were used to source all my irrigation parts. I used 4 250 gallon water totes to provide 3 days of water reserve.www.growhoss.com
How to build a homemade 3 point garden bedder / hiller for tractors. #arccaptain Cut Weld N Grind 2024-02-12 | How to build a homemade 3 point garden bedder / hiller for tractors. #arccaptainI decided to build me a homemade 3 point garden bedder or hiller for my Kioti CK2610. Most of the parts for the bedder were ordered from Agri supply. The bedder / hiller was made for under $300 and a similar one will cost about $600 online. I did build a trailer hitch that is also used to mount this garden bedder. I will post links to parts used.Arccaptain Mig200 Welderarccaptain.com/products/mig200-200amp-multi-process-synergic-mig-welding-machineArccaptain Cut50 PLasma cutterarccaptain.com/products/arccaptain-50-amp-portable-plasma-cutter-cut50Garden Bedder / Hiller parts used.102237 CLAMP 50X8 32X10MM M12 agrisupply.com/s-tine-clamp-32-x-10/p/10223715399 9" X 6MM DANISH SWEEP STYLE WITH agrisupply.com/mm-danish-sweep-style-with-dimple/p/1539932655 3/8X1-1/2"ELLIPTICAL GR.8 PLOW agrisupply.com/elliptical-head-bolts-and-nuts-pack/p/32655 101600 S-TINE 32X12 WITHOUT POINTagrisupply.com/s-tine-heavy-duty/p/101600 36358 DISC HILLER 14" KING TYPE DISC agrisupply.com/disc-hiller-with-shank-king-style-hub/p/36358
How to build a homemade tractor 3 point trailer hitch from scrap metal. #arccaptain Mig 200 Cut50 Cut Weld N Grind 2024-02-07 | How to build a homemade tractor 3 point trailer hitch from scrap metal. #arccaptain Mig 200 Cut50Today I decided to build a hitch for the 3 point of my Kioti CK2610 tractor. I went to a local store and they wanted $300 so I spent $50 and built my own.Scrap metal is what keeps my projects low cost but sometimes limits me on the design due to what's available. This 3 point trailer hitch made with the Arccaptain MIG200 welder will be used to attach a garden bedder and a ripper to help lay PVC pipe. Use code CUTWELDNGRIND on arccaptain website to save a few $$, I do make a small portion from each sale that helps me continue with my projects.MIG200arccaptain.com/products/mig200-200amp-multi-process-synergic-mig-welding-machineCUT50arccaptain.com/products/arccaptain-50-amp-portable-plasma-cutter-cut50
Using the Primeweld CUT60 and Langmuir crossfire to build a DIY grill for the Kioti CK2610. Cut Weld N Grind 2024-01-21 | Using the Primeweld CUT60 and Langmuir crossfire to build a DIY grill for the Kioti CK2610.I wanted to build a grill for the KIotiCK2610 for a while and decided to cut a template out. This project was cut out of 14 gauge steel but once I finish design it will be cut on 10 gauge material. The Primeweld CUT60 has been a beast and the Langmuir Systems Crossfire XL has worked excellent.Once again this is just a prototype of the finished product. The grill will add looks and extra protection to the front of the tractor. Thanks for watching and see you in the next video.
Welding The Ultimate DIY Giant Square With Langmuir Systems And Arccaptain Mig200! Cut Weld N Grind 2024-01-07 | Welding The Ultimate DIY Giant Square With Langmuir Systems And Arccaptain Mig200!Building a DIY mega square with my langmuir systems and Arccaptain Mig200.I needed a larger mega square or similar combo square and found a file to cut that was perfect for this project. The link to the DIY square is below. I used my Langmuir systems crossfire and my Arc Captain Mig 200 to build this project. The square is easy to weld and is very sturdy with the 3/16 mild steel used.Arccaptain Discount code = CUTWELDNGRINDI do make a small percentage when code is used which helps on creating other videos.$25 off coupon when you use referral linkhttps://i.refs.cc/HAUz8VIe?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSJ9Arccaptain Mig 200 welderarccaptain.com/products/mig200-200amp-multi-process-synergic-mig-welding-machineCNC table langmuirsystems.comLink to 12x12 Squarelangmuirsystems.com/fireshare/search?q=square00:00 Cutting square with Langmuir Systems Crossfire01:12 Setting up material and Arccaptain Mig20002:30 Welding the square with the Arccaptain Mig20004:39 Prepare for paint05:31 Testing and review of DIY square
Reviewing And Testing The Arccaptain Mig200 Multi Process Mig Welder 200 Amps Aluminum #arccaptain Cut Weld N Grind 2023-12-14 | Reviewing And Testing The Arccaptain Mig200 Multi Process Mig Welder 200 Amps Aluminum #arccaptain Today I got to finally test and review my Arccaptain Mig200 Welder after my Yeswelder MIG205DS went out in a bang.I ran a few test including MIG and spot welding but there will be more videos to come including MMA and probably spool mode.Arccaptain has cool products and more information can be found on their website.www.arccaptain.comMIG200 linkarccaptain.com/products/mig200-200amp-multi-process-synergic-mig-welding-machineDiscount code CUTWELDNGRIND for a 5% off, I do get a small commission that helps me gather more items to test and review. More information from website.Multi-Process MIG200 : Gasless Wire Welder/MIG Welder/Stick welder/Lift TIG welder/Spot welder/Aluminium welder with spool gun.Easy to use,Friendly to beginnersLeading SYN/Inverter TechnologyFan-on-demand: a cooling fan that only runs when necessary. Burn-back adjustment: pre-flow/post-flow functions will help you improve welding efficiency.Easy to find replacement partsLight Weight|Ultra Portable: only 28.2 lbs, easy to carry and travel with. Great for repair jobs around the house or farmBuy with Confidence& 2-Year Warranty00:00 Introduction and unboxing01:44 Setup and settings04:48 First Mig welds08:31 Spot weld mode09:08 Measure heat across ground cable11:36 Review and my thoughts on machine
Testing and reviewing the Yeswelder Arc 145ds Tig and Stick welder #Yeswelder Cut Weld N Grind 2023-12-12 | Testing and reviewing the Yeswelder Arc 145ds Tig and Stick welder #yeswelder If you need a discount code feel free to use ether of the following. yeswelder.com/?ref=QvYIN3t7Coupon Code10% offCUTWELDNGRINDI make a small percentage that allows me to continue with these reviews.Today we have a Yswelder Arc 145DS stick and Tig machine. I was surprised to see this little monster included the Tig setup, well minus the regulator and tungsten. The welder worked excellent even though I lost a lot of footage like usual. If you are looking for a budget or entry welder check yeswelder out.www.yeswelder.com
Testing and reviewing the Arccaptain Arc160 stick tig welder #Arccaptain Cut Weld N Grind 2023-11-25 | Testing and reviewing the Arccaptain Arc160 stick tig welder #arccaptain arccaptain.com/?ref=CUTWELDNGRINDDiscount code CUTWELDNGRINDToday I got to try out a new portable Arc welder from Arccaptain. The ARC 160 performed excellent on my testing and really impressed me with the 6010 electrodes.Just like the Arccaptain cut50 and Mig200 this machine sure packs a punch. I hope this unboxing, review and testing video helps you decide if this is the right welder for you. visit www.Arccaptain.com for there product line up and accessories. arccaptain ARC160 Arcwelder used in video.arccaptain.com/products/arccaptain-stick-welder-160a-arc-lift-tig-welding-machineThe ARCCAPTAIN ARC160 is a 160 Amps dual voltage synergic stick welding machine, which supports 2 welding modes, including MMA and lift TIG. It integrates MCU control and an IGBT inverter and is currently the best ARC welding machine on the market for under $200. The ARCCAPTAIN ARC160 can also be easily taken outdoors for repairs and various DIY welding projects.Features:1.Focus on Your Safety MoreWe ensure the safety of our customers by providing an overcurrent/over voltage/overcurrent/overload/overheating prevention feature based on VRD.2.MCU Control and IGBT Inverter TechnologyThe leader in digital welding machines. All of our welding machines adopt advanced technology to make your welding more efficient.3.Synergic function, Easy to useAfter starting the SYN function, you only need to choose the diameter of the welding rod, and you don't need to adjust the current, you can get a better welding effect.4.Wide ApplicationYou can use our welding machine in a various scenarios including Construction, Automotive, General Fabrication, Maintenance & Repair, Repair Welding,etc. It is an ideal for beginners and the welders.who are learning to weld and that want to make small repairs around the house.5. 2 Years Warranty00:00 Unboxing01:34 Settings / Menu Setup03:22 Welding test06:31 Review welds07:50 My view of the ARC160
I Used My Primeweld Cut60 And Langmuir Crossfire To Cut A Dallas Cowboys Football Field Bbq Grate. Cut Weld N Grind 2023-11-19 | I Used My Primeweld Cut60 And Langmuir Crossfire To Cut A Dallas Cowboys Football Field Bbq Grate.I am working on a small BBQ grill and needed a custom cooking grate. I have wanted to try making my own and will decided to get my Langmuir Systems Crossfire cutting. I used my Primeweld CUT60 and since I share the power outlet my air compressor ran out of air. The Dewalt 60 Gallon compressor was not enough storage for this cut as we saw in the video.Hope you enjoyed this video, like always thanks for the support.
My Mig205ds Mig Welder: 1 Year Review And It Blew Up! Cut Weld N Grind 2023-11-05 | My Mig205ds Mig Welder: 1 Year Review And It Blew Up!I was working on a grill last night when I heard a loud bang similar to a shotgun. My ears where ringing and could not understand what was happening. The MIG205ds showed ERR on display but dazed could not understand what had happened. Unit was received in May 2022 and was a powerhouse of a machine. This MIG205DS was my favorite welder nest to my engine driven Hobart.One of my cameras picked this up, enjoy.
How To Build Homemade Weldable Hinges For Bbq Grills And Offset Smokers In Under 60 Minutes! Cut Weld N Grind 2023-10-29 | How to build homemade weldable hinges for bbq grills and offset smokers. Primeweld Cut60These hinges were made from scrap 3/16 mild steel and my first attempt ever at homemade hinges. I used my Langmuir crossfire table paired with a cut60 from Prime weld to cut these. I hope you enjoyed the quick video of building hinges for smokers or grills.Plasma table use din videolangmuirsystems.com/crossfirePlasma Tableslangmuirsystems.comPlasma cutter Primeweld Cut60primeweld.com/products/cut-60-220v-110v-60-amp-plasma-cutter
Unboxing And Testing The New 2023 Bestarc Btc500dp 3gen Pilot Arc Plasma Cutter. #Bestarc Cut Weld N Grind 2023-10-20 | Unboxing and testing the new 2023 Bestarc BTC500DP 3gen pilot arc plasma cutter. #Bestarc I got to test another plasma cutter today and it was the Bestarc BTC500DP 3 gen machine. This is a high frequency pilot arc machine which performed awesome. I was able to cut thin sheet metal up to 1 inch rebar.I also used the BestArc BTC500dp to cut 1/8" aluminum and stainless steel. I did a lot of cuts to show how it performed on the materials I had on hand.The unboxing and review were short and most of the video was focused on performance, hope you enjoyed the video.Amazon: amazon.com/dp/B0C6G3SQ3WWebsite: bestarc.comYouTube: youtube.com/@BestArc-officalInstagram: instagram.com/bob_bestarcTikTok: tiktok.com/@bestarc_officalSpecs from www.bestarc.com websitePlasma Cutter, Pilot Arc BTC500DP 3rd Generation 50Amps Dual Voltage[Pilot Arc Function]: This plasma cutter has the pilot arc function. It is a high frequency non-touch arc starting mode. The torch head does not need to touch the metal plate. It can greatly extend the working life of consumables, and increase the cutting thickness; plasma cutter with this function can cut steel plates with rust and paint on the surface.[Automatic Cutting]: 2T is semi-automatic cutting control, 4T is automatic cutting control. Switch to 2T, press and hold the torch switch to start arc and cutting, release the switch to stop arc and cutting. Switch to 4T, press the torch switch to start the arc and cutting.When you release the switch, the torch is still cutting.Press the switch again to stop the arc.[Air Pressure & Air Compressor]: The regulator and gauge are installed in front of the panel，you can read the air pressure value through the air gauge. We recommend air pressure value be in the range of 40-70 PSI. You can also adjust the air pressure through the regulator. The air filter has been installed on the rear of machine with a quick air connector, and the user can use it after connecting with the air compressor. Recommended air compressor 45L/min.[Cutting Thickness]: The machine is equipped with a current display. You can choose the current to match the air pressure through the cutting chart which mention in manual, expediently and efficiently. Current display at 110V is 10-35A, Under 220V current display is 10-50A, the maximum cutting thickness is recommended to be 12mm @ 35A 110V, 60PSI; 16mm@50A 220V 70 PSI.[Post Time Function]: BTC500DP with post time function, the adjustment range is 2-15 seconds. This function can be adjusted by yourself extend or shorten the cooling time of the torch head, effectively provide cooling, and extend the working life of consumables. Users can adjust the cooling time required to fully cool the torch head. In generally, we recommend a cooling time of 4-8 seconds, if the Plasma cutter worked too long please cool it for 10-12 seconds.00:00 Introduction00:31 Unboxing01:33 Setup03:18 Cutting test 18g to 1/2"06:21 Cutting wire rope, stainless, aluminum etc08:14 Cutting 1 inch rebar09:27 Review
Testing and review of the new Arccaptain Cut50 Plasma Cutter: Unboxing 2023 #arccaptain Cut Weld N Grind 2023-10-12 | Testing The Arccaptain Cut50 Plasma Cutter: Review And Unboxing #arccaptainWe will be testing and unboxing the Arccaptain cut50 plasma cutter today.Today I got to test the Arccaptain Cut50 plasma cutter and I got some results. The Cut50 was tested on material as thin as 16g and up to 3/4".I hope you enjoy the video and can make a decision if this is the right plasma cutter for you. Here is a referral link to help you save 5% and also earns me a little commission to be able to continue with these projects.arccaptain.com/?ref=CUTWELDNGRINDor coupon code..... CUTWELDNGRINDArcCaptain Cut50arccaptain.com/products/arccaptain-50-amp-portable-plasma-cutter-cut50www.Arccaptain.comSpecs from websiteThe ARCCAPTAIN 50A plasma cutter delivers excellent performance on cutting alloy steel, stainless steel, mild steel, copper, aluminum, etc. Equipped with a large LED display, you can read all data and functions clearly and easily without taking off your helmet. The post-time function can be adjusted(5-15 seconds), extending consumable life. This plasma cutter machine is very easy to operate and features 110/220V dual voltage, you can see the input voltage clearly on the LED display. It's super lightweight and portable, take it anywhere you want with the sturdy handle or shoulder strap(Package included).It's perfect for both demanding industries and home project. TIPS: There are differences between American welding machines and European standard welding machines. There will be differences in prices and product features. Please choose correctly. EU countries need to pay for shipping.Features:Portable and Super LightweightEasy to set upLarge LED displayMax Rated Clean Cut Thickness: 1/2"Max Severance Thickness: ¾"Suggested Amperage & Air Setting Cutter00:00 Introduction00:18 Unboxing01:35 Setup controls02:16 Cutting mild steel 16g-1/2"07:47 Cut results09:30 3/4" final test
How to build a magnetic spray paint rack from scrap metal: Welding ideas 2023 Cut Weld N Grind 2023-10-01 | How to build a magnetic spray paint rack from scrap metal: Welding ideas 2023 Using scrap metal to make home made tools and equipment. Short video of a diy homemade spray paint caddy or rack.
2023s Best Diy Halloween House Decorations Using Plasma Cutters And Strobe Lights Cut Weld N Grind 2023-10-01 | Best DIY Halloween decoration ideas for the house 2023 using plasma cutter and strobe lights.2023's Best Diy Halloween House Decorations Using Plasma Cutters And Strobe LightsI wanted some decorations for the front yard and these are the first ones I try doing. Ideas are rolling in for the next projects so stay tuned for cool stuff. I did use my plasma table to create metal artwork but a simple plasma cutter can be used. Metal used is 14g so will last a long time and wont bend easliy.Plasma cutter Prime Weld Cut 60primeweld.com/products/cut-60-220v-110v-60-amp-plasma-cutterOLMLMO Grinder Used.amazon.com/Angle-Grinder-Cordless-Batteries-Brushless/dp/B0C7VGF3T6/ref=sr_1_2?crid=3D58HECP1UXSP&keywords=olmlmo%2Bgrinder%2Bangle&qid=1696126235&sprefix=olmlmo%2Bgrinder%2Bangle%2Caps%2C87&sr=8-2&th=1Langmuir Plasma table. Crossfire with XL kit.langmuirsystems.comStrobe light $5 at dollar storeTable cloth $1.00 at dollar store but recommend something stronger then table cloth.
Reviewing The Brand New Olmlmo Ag01 21v Brushless Angle Grinder! Cut Weld N Grind 2023-09-17 | Reviewing The Brand New Olmlmo Ag01 21v Brushless Angle Grinder!I was sent this Olmlmo angle grinder to test and review. I have been using it a few weeks already and has worked perfectly for my applications. I hope you enjoy the video and get an idea of the performance of this tool.Link to angle grinder.amazon.com/dp/B0C7VGF3T6Asin : B0C7VGF3T6Here is some information provided by manufacture.The 21V angle grinder brushless motor provides up to 10000RPM speed, equipped with a 21V 4.0Ah high-capacity lithium batteries and a fast charger that has been tested many times, 1-3 grinding iron + cutting wood, 4-6 cutting marble + cutting iron. The cordless angle grinder for small architectural details is very Suitable for polishing, cutting, and grinding. Cordless design saves you the hassle of dragging, jerking, and positioning the power cord. Very convenient to carry, suitable for indoor and outdoor use. The safety lock design of the angle grinder tool prevents accidental activation of the tool and protects your safety.Our products are manufactured with a focus on quality and reliability. We use the most advanced technologies and materials during the manufacturing process to ensure an exceptional user experience for our customers. Furthermore, we offer comprehensive customer support and after-sales services to ensure that every customer gets a satisfactory shopping experience.
New: Unboxing And Testing The Vevor Hc60 4000t Clamp On Pallet Forks! Cut Weld N Grind 2023-09-10 | New: Unboxing And Testing The Vevor Hc60 4000t Clamp On Pallet Forks!Unboxing and testing the Vevor HC60 4000t Clamp on pallet forks.VEVOR Pallet Forks, 4000 lbs Capacity clamp on Pallet Forks, 60" Tractor Bucket Forks, Heavy Duty Front Loader Attachment for Tractor, Loader Bucket, Skid Steer, Tractor Forks for Agriculture and FarmAbout this item4000 LBS Capacity: Made from durable square steel tubing, these pallet forks can easily handle your everyday needs without bending or breaking under pressure.Reinforced Bolts & Screws: With reinforced bolts and grooved screw heads, our clamp on pallet fork is built to last.Versatile Usage: Our tractor fork is perfect for a variety of tasks such as moving logs, wood, and firewood, transporting fence posts and hay bales, clearing debris and bushes, and more.Easy Installation & Versatile: Our tractor fork is designed to handle a variety of tasks. Simply slide the fork over the cutting edge of your bucket and clamp it down to lock it in place. You can use it to move logs, wood, and firewood, transport fence posts and hay bales, clear debris and bushes, and more.Product Dimensions: This pallet fork for tractor and bucket measures 60" overall length, with a 43" fork blade. The blade has a height of 2" and a width of 2.75". The gap between the lip of the bucket and the blade is 2.95". Each package contains 2 x Pallet forks and 1 x user manual.vevor.com/pallet-forks-c_10417/vevor-pallet-forks-4000-lbs-capacity-clamp-on-pallet-forks-60-tractor-bucket-forks-heavy-duty-front-loader-attachment-for-tractor-loader-bucket-skid-steer-tractor-forks-for-agriculture-and-farm-p_010442940784Here are other Vevor Forks1500lb Clamp on Forks 43"vevor.com/pallet-forks-c_10417/clamp-on-pallet-forks-30-1500lbs-capacity-loader-bucket-skidsteer-tractor-chain-p_010442211959VEVOR 30" Clamp on Pallet Forks, 1500 Lbs Tractor Bucket Forks with Adjustable Stabilizer Barvevor.com/pallet-forks-c_10417/39-clamp-on-pallet-forks-w-bar-1500lb-loader-tractor-heavy-duty-p_010147689942VEVOR Clamp on Pallet Forks, 2000 lbs Capacity Pallet Forks, 60"vevor.com/pallet-forks-c_10417/vevor-clamp-on-pallet-forks-2000-lbs-capacity-pallet-forks-60-tractor-bucket-forks-heavy-duty-front-loader-attachment-for-loader-bucket-tractor-skid-steer-tractor-forks-for-agriculture-and-farm-p_010216508106
Remove Rust And Mill Scale from metal easily With This Vinegar Hack! Cut Weld N Grind 2023-09-04 | How to remove rust and mill scale from metal using vinegar hack.Here is how I clean new and rusted metal using 5% cleaning vinegar. I like to soak all material new and used in Vinegar for a minimum of 24hrs to help prep materials. Vinegar can normally be found in 5-6% concentrations at just about any store. 20-30% vinegar is stronger but the price could jump to $30 per gallon versus $1-2 for the lower concentration. Mill scale and dross can be removed easily using 5% vinegar and that's how I prepare the monograms I cut on my CNC table. If there is any questions lets me know. I will post link to stronger vinegar that can be found at home depot.Homedepot and other examples of vinegar I have used. 128 oz. 30% Vinegar All Purpose Cleaner Concentratehomedepot.com/p/Harris-128-oz-30-Vinegar-All-Purpose-Cleaner-Concentrate-VINE30-128/309463051Heinz All Natural Original Multi-Purpose Extra Strength Vinegar with 6% Acidity, 1 gal Jugwalmart.com/ip/Heinz-All-Natural-Original-Multi-Purpose-Extra-Strength-Vinegar-with-6-Acidity-1-gal-Jug/21570071?athbdg=L1102&from=/searchCalyptus 45% Pure Super Concentrated Vinegar | Dilutes to 9 Gallons | 9x Power Concentrate Vinegar | 1 Gallonamazon.com/Calyptus-Stronger-Concentrated-Industrial-Alternative/dp/B07W9HX3MV/ref=sr_1_1_sspa?crid=1I5OGT5CZ1EQ8&keywords=cleaning+vinegar&qid=1693851185&sprefix=cleaning+vinegar%2Caps%2C147&sr=8-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1
I bought a used Dewalt dxcm601 60 gallon air compressor for my Langmuir systems plasma cnc table. Cut Weld N Grind 2023-08-16 | I bought a used Dewalt dxcm601 60 gallon air compressor for my Langmuir systems plasma cnc table.I went to TSC and saw this used Dewalt DXCM601 for under $100. I asked if unit worked and they said it was returned and so9ld as is. I know the electric motor alone is worth about $250 so it was a risk I was taking. I always wanted to add an auxiliary tank to my Langmuir Plasma table and thought this would be a great buy. The unit powered on, built pressure but I need further testing to see if compressor head is working properly.
Used my Primeweld Cut60 and Langmuir Systems Crossfire to cut a monogram, beginner project Cut Weld N Grind 2023-07-04 | Used my Primeweld Cut60 and Langmuir Systems Crossfire to cut a monogram, beginner project.I have owned the Langmuir crossfire XL about 1 week. The first project I made was a round flange and then jumped up to this monogram. I have been wanting to get the Pro table but say this Crossfire for sale used and thought it was a good idea to begin learning.I am very new to Fusion and Fire Control so sometimes I do things the long ways and then see a short cut while watching youtube video.
Building A Heavy Duty Bbq Grill Grate Using My Yes Welder Mig205ds Cut Weld N Grind 2023-05-26 | Building A Heavy Duty Bbq Grill Grate Using My Yes Welder Mig205dsI decided to build a new grill grate so my parents can enjoy cooking outdoors. The grill grate does not have handles due to it being stationary and will have large pots that can interfere with handles. The MIG205ds from Yeswelder tackled this project with ease and worked nicely. I decided to use 1/2" roundbar after watching the grill my friends had in Monterrey Mexico. Hope you enjoyed the video and like always if there is any questions or suggestions post them below.Discount Coupon code for Yeswelderyeswelder.com/?ref=QvYIN3t7or use my code CUTWELDNGRIND
Bought a Kioti CK2610 HST tractor with KG4066 root grapple and titan rotary cutter Cut Weld N Grind 2023-03-26 | Bought a Kioti CK2610 HST tractor with KG4066 root grapple and titan rotary cutter.I decided to buy a Kioti CK2610 tractor and Kioti CK lineup was on top of my list for compact units. The Kioti CK2610 HST and loader was financed while the Kioti KG4066 root grapple, Titan rotary cutter and w.r long 3rd function valve were paid cash. Kioti CK2610 tractors had a (0) actually a .4% to .7% interest and financing the implements would increase my package deal above 2%. The purpose of this Kioti CK2610 tractor and KG4066 grapple is to cut my tall grass, maintain my road and to help move scrap metal like: Propane tanks, Beams, Pipes, cars etc.Hope you enjoy the video and any questions let me know.
Testing my diy hitch n rake 3 point plow adaptor. Homemade using scrap and badlands winch. Cut Weld N Grind 2023-03-25 | Testing my diy hitch n rake 3 point plow adaptor. Homemade using scrap and badlands winch.Here is a small project I welded up so that I can maintain my property. I used scrap metal and a badlands winch from harbor freight. The rake is also homemade or a DIY project I did years ago.Harbor Freight winch link.harborfreight.com/automotive/winches/2000-lb-utility-trailer-winch-with-steel-rope-57365.htmlYeswelder coupon code use CUTWELDNGRIND to get a discount.yeswelder.com/discount/CUTWELDNGRIND?ref=QvYIN3t7
How to build a homemade metal bender out of scrap metal, easy diy project Cut Weld N Grind 2023-03-16 | How to build a homemade metal bender out of scrap metal, easy diy project. Yeswelder Arc Pro 165 project.Here is a metal bending tool I built out of scrap metal to build 90 degree angle bracing. I used my Dewalt grinders and my Yeswelder Arc pro 165 to complete this little project.I also have a code for 10% off yeswelder items on which I get a small commission. yeswelder.com/?ref=QvYIN3t7Coupon Code10% offCUTWELDNGRIND
Removing my Hobart Champion welder so I can sell my 3500HD flat bed truck. DIY Flat Bed Cut Weld N Grind 2023-03-12 | Removing my Hobart Champion welder so I can sell my 3500HD flat bed truck. I finally moved all my cars to be able to remove the Hobart Champion engine welder so I can list the truck for sale. This 3500hd is a decent truck and being 4x4 was the only reason I kept it. I think I might have issues using my goose neck trailer on this truck since it goes over the 26,000 lb limit. I am looking into a 2500 to replace my 3500hd but lets keep it on the low for now.I will keep my Hobart welder on the Ford f250 for now and then relocate the f250 to keep my house a bit more organized.Thanks all for the support over the years and sorry I took a long break from EL Youtube.
Harbor Freight Portland 6.5 amp electric telescoping pole saw review. #harborfreight Item# 56808 Cut Weld N Grind 2022-11-08 | Harbor Freight Portland 6.5 amp electric telescoping pole saw review. #harborfreight I bought this saw to cut down a fairly large oak tree that was to close to my homes foundation. The Portland Pole Saw was a great bargain after getting it for $50 with a coupon. 6.5 amps of power sure did go through over 8" thick branches without a problem so feel like the power is adequate for my application. The pole saw does extend out to 8ft or so but I mostly had it to about 6 feet of range.I think the saw is great and hope this review helps others making the choice on their purchase.Link to sawharborfreight.com/65-amp-95-in-electric-pole-saw-56808.htmlSpecs from website This long reach electric pole saw provides a quick and safe option for trimming high tree branches. The telescoping fiberglass pole extends from 6 ft. to 8 ft. 10 in.. Low kickback design for additional safety.Extends from 6 ft. to 8 ft. 10 in.9-1/2 in. bar with 3/8 in. pitch Oregon® chain & automatic chain oilerSafety features include reduced kickback design and hand guardEasy chain adjustmentSKU(s)56808, 68862, 62896, 63190BrandPORTLANDAC Volts120Bar Length9-1/2 in.Accessories IncludedChain guardAmperage (amps)6.5CertificationCSA, ETLHorsepower (hp)1.5Product Height3 in.Product Length72 in.Product Weight7.5 lb.Product Width5 in.Shipping Weight9.80 lb.Power cord (ft.)13 in.
My $1700 2015 Ford F150 from auction slight wrecked damage rebuild project. Cut Weld N Grind 2022-10-17 | My $1700 2015 Ford F150 from auction with slight wrecked / deer strike damage. I finally got me a decent truck at auction and thought it was 4x4, guess RWD will work too. The Truck will be an easy fix and looks like a reliable truck once I assemble the front end and put bigger wheels.Should I do a small lift on it?Should I go factory front or add after market bumper?Well thanks for the support everyone and thanks for watching me and my adventures.
How to plasma cut halloween pumpkins jackolanterns from scrap tank: atmosfx projections primeweld Cut Weld N Grind 2022-10-06 | How to plasma cut halloween pumpkins jackolanterns from scrap tank: atmosfx projections primeweldIn this video I picked up 2 tanks from the scrap yard, one is a refrigerant tank and the other a helium tank. I decided to use these tanks because they were empty and are non flammable. I got new consumables ready for the Primeweld CUT60 plasma cutter and started cutting scrap yard tanks. I also plan on using Atmosfx projections and cheap 40-50 dollar projectors from Ebay to project images. I used a tiny projector to get image onto tanks and also to display the AtmosFX. I will post a model number below incase you are interested in the projectors I will use.Safety First and DONT cut propane tanks or other tanks that contain or contained flammable contents.Decorations digitalatmosfx.comPrimeweld Plasma Cutters including CUT60primeweld.com/collections/plasma-cuttersProjector used is a MOOKA RD-823, quick search will bring them up on ebay and other online retailers. Price goes from $58 to $120 for the same model.Upgrade Your Movie-Watching Experience with the Mooka Family RD-823 WiFi Movie Projector. Our Home theater projector are available with 8000 Lus high brightness in ambient light, 5000:1 contrast, 1080p FHD supported, MStar advanced color engine.
Welding hooks for tractor loader bucket primeweld cut60 and yeswelder arc pro machines Cut Weld N Grind 2022-09-21 | I welded some hooks for a Mahindra or Case tractor loader bucket. I used my Primeweld cut60 and Yeswelder arc pro machine with some scrap metal to build these bracket for the hooks. Welding on the hooks can damage hooks, lower WLL or injury. Please use a professional.Harbor Freight hooksharborfreight.com/2-piece-5400-lbs-3-8-eighth-inch-clevis-grab-hooks-34145.htmlPrimeweld CUT60 PLasma Cutterprimeweld.com/products/cut-60-220v-110v-60-amp-plasma-cutterYeswelder ArcProyeswelder.com/collections/arc-welder/products/arc-welder-165a
Makita XRJ07R1B RECIPROCATING BRUSHLESS LITHIUM SAW SAFETY TOOL KIT 2022 : 6000 SUBSCRIBER GIVEAWAY Cut Weld N Grind 2022-08-06 | Makita XRJ07R1B RECIPROCATING BRUSHLESS LITHIUM SAW SAFETY TOOL KIT 2022 : 6000 SUBSCRIBER GIVEAWAYI am doing a give away to celebrate my 6000 subscriber goal. To win this Makita reciprocating saw there is a few basic rules.1 Giveaway is for US and Canada only. International winner gets gift card.2. Be a subscriber3. Send me an email to cutweldngrind@yahoo.com and post user name so I can enter it in a random picker.Please only respond to me and no one else will notify you by comment. Winner to be announced in a video in September 2022.Email once again is cutweldngrind@yahoo.com18V LXT Lithium-Ion Sub-Compact Brushless Cordless Reciprocating Saw Kit (2.0Ah), 13/16 in. Stroke Length, XRJ07R1BLink to store where I got saw.tractorsupply.com/tsc/product/makita-18v-lxt-lithium-ion-sub-compact-brushless-cordless-recipro-saw-kit-(20ah)-xrj07r1b?cm_vc=-10005
YESWELDER CUT 65DS REVIEW AND SETUP : CUT 1 INCH STEEL WITH THIS PILOT ARC PLASMA CUTTER #YESWELDER Cut Weld N Grind 2022-07-05 | YESWELDER CUT 65DS REVIEW AND SETUP : CUT 1 INCH STEEL WITH THIS PILOT ARC PLASMA CUTTER #YESWELDERThe YESWELDER Cut-65DS is finally here and I was able to test it out to see what it could handle. I did a quick unboxing, setup and review on the unit. The Setup of the YESWELDER CUT-65DS was easy and quick. The plasma cutter can be found on www.yeswelder.com.Website www.yeswelder.comPlasma cutter used yeswelder.com/products/plasma-cutters-cut-65ds?_pos=1&_sid=dbca19f36&_ss=rHere is my referral link which if used I do get a small portion of the sales.Referral Linkyeswelder.com/?ref=QvYIN3t7orCoupon Code10% offCUTWELDNGRIND00:00 Introduction00:36 What's Included01:11 Setup03:27 Cutting scrap steel07:57 Review
3 in 1 Yeswelder MIG 205DS stick welding review and setup : Scratch Tig welder Cut Weld N Grind 2022-06-08 | 3 in 1 Yeswelder MIG 205DS stick welding review and setup : Scratch Tig welder #yeswelderThe Yeswelder MIG 205ds is the newest machine I got a chance to test and review and here is some stick welding action on it. This Yeswelder mig 205ds welding machine was sent in for me to test and review and the opinion I have is exactly what I think on this machine.Visit yeswelder for more cool products and discounts.www.yeswelder.comLink to this machine isyeswelder.com/collections/welder-cutter/products/mig-welder-mig205I also have a discount code that can be used for 10% off where I will get a small commission.Coupon Code for 10% off CUTWELDNGRINDyeswelder.com/discount/CUTWELDNGRIND?ref=QvYIN3t710% off CUTWELDNGRINDSpecs from Yeswelder website-----------------------------------------------------------------------------------------SpecificationsProduct weight: 23lbProduct Dimensions: 18.11"*8.07"*14.17"Supply Voltage: 110V/220V 50/60 HzInput Current: 45A@110V, 30A@220v Output Current: 30-205A (MIG) 20-180A (MMA) @220V; 30-166A (MIG) 20-146A (MMA) @110VDuty Cycle: @110V, 60%@160A, 100%@123A @220V, 60%@205A, 100%@158ACan apply to 2 and 10 pound rolls of wireWelding Material: Carbon SteelProtection Class: IP21S-----------------------------------------------------------------------------------------DC Stick WeldingSmooth welding and fast burning.Capable of welding with 7018/6011 electrodes.Electrode up to 1/8"@110V, 5/32"@220V.Apply to 9/64" thick carbon steel @110V, 13/64"@220V.-----------------------------------------------------------------------------------------
How to build a T Post puller remover tool from scrap metal : Diy welding project invention Cut Weld N Grind 2022-05-15 | How to build a T Post puller remover tool from scrap metal : Diy welding project inventionI finally decided to build my own T post puller instead of paying $60 to $100 for one. I cut and welded a few sections of scrap metal to make this tool. This is a heavy duty puller and worked out great. I will do another test with a t post as far down as possible to see if I can remove it. Scrap metal projects helps save money and prevents good steel from going to the land fill.Hope you enjoy the video and see you in the next one.Keywordspost pullert post pullerhow to remove a fence postfence post pullert-post pullert-post puller tractorpost puller attachmentpost puller 4x4post puller diypost puller toolfence post puller toolt-post puller fence post pullert-post puller diyfence post puller chainusing a t post pullert post puller how to uset post puller diypost puller chaint post puller plans
How to build a bbq grill smoker out of a compressor tank pig cooker: Custom Propane scrap tank idea Cut Weld N Grind 2022-05-08 | How to build a bbq grill smoker out of a compressor tank pig cooker: Custom Propane scrap tank idea.I found a used compressor tank from 1997 and decided to make a bbq grill in the form of a pig. I don't have a name for this pig cooker but it sure can grill. When using tanks for bbq grills I prefer to use tanks that don't hold any flammable contents to prevent any issues. The BBQ grill project is an easy DIY project that can be done in a day or two. Grills that have a theme or custom design usually catch more money in case you want to sell take that in mind.DIY projects from scrap is something I enjoy since I give a second life to the material.Propane tanks, compressor tanks and freon tanks are among the items I find at my local scrap yard that I can use but again PROPANE TANKS ARE A EXPLOSION HAZARD.
Cooking a Ribeye steak on the home made rocket stove and griddle setup. Cut Weld N Grind 2022-03-23 | Cooking a Ribeye steak on the home made rocket stove and griddle setup.I decided to build a rocket stove and actually had to test how it cooked in the afternoon. I picked up a 16oz Ribeye steak and tried to get a Medium temperature but the griddle was really hot. The steak came out between a Medium and a Medium Well but the camera does not pick it up that good. I will put the plans or design I used to build the rocket stove. Rocket Stove 2022 Buildyoutube.com/watch?v=ERcBy9ZaLoMRocket Stove 2020 Buildyoutube.com/watch?v=XoC5Wnz3kBIThanks for watching and please comment, share and subscribe.Cut Weld N GrindJorge SernaP.O Box 15186Zapata Tx 78076CutWeldNGrind@yahoo.comhow to build the best rocket stovehow to build a rocket stovehow to weld with a wire feed welderhow to build a rocket stove for cookinghow to build a rocket stove mass water heaterdiy rocket stove ovendiy rocket stove - simple homemade rocket stovediy rocket stove grillbuild a rocket stbuild a rocket stoverocket stoverocket stove buildrocket stove diyrocket stove cookingrocket stove designcamp stovehow to weldsurvival stove
How to build the best rocket stove from scrap metal off grid use. New design plans Cut Weld N Grind 2022-03-22 | How to build the best rocket stove from scrap metal off grid use. New design plans. I picked up some scrap metal from the scrap yard and built another awesome rocket stove. The rocket stove is easy to build and I included the measurements / plans that I used. Welding and fabricating is something I enjoy as well as Outdoor cooking. This rocket stove is an easy DIY weekend project that even a beginner can tackle. I used a Prime Weld Cut 60 Plasma cutter but a cutting disk or band saw can do most of what I did. The welder I used was a budget friendly Yes Welder Arc Pro 165 running 6013 and 6011 in 3/32 and some 7018 in 1/8".I hope you enjoy the video and I will add a link to my previous rocket stove build I did last year.Previous Rocket stove build 2020youtube.com/watch?v=XoC5Wnz3kBICut Weld N GrindJorge SernaP.O Box 15186Zapata Tx 78076CutWeldNGrind@yahoo.comPrimeweld Cut60 Mild Steel 1" test cutyoutube.com/watch?v=ZOf9FsfjSjgPlasma cutter linkhttps://primeweld.com/products/cut-60...Consumables linkprimeweld.com/products/cut60-plasma-cutter-consumables-20-piece-setAmazon Linkhttps://www.amazon.com/PRIMEWELD-Non-...Tagsrocket stove buildrocket stove diyrocket stove designrocket stove cookingrocket stoves homemadebuilding a rocket stovecutweldngrindcut weld n grindjorge sernarocket stovehow to build the best rocket stovehow to build a rocket stovehow to weld with a wire feed welderhow to build a rocket stove for cookinghow to build a rocket stove mass water heaterdiy rocket stove ovendiy rocket stove - simple homemade rocket stovediy rocket stove grillbuild a rocket stbuild a rocket stoverocket stoverocket stove buildrocket stove diyrocket stove cookingrocket stove designcamp stovehow to weldsurvival stove
Sticker mule logo stickers review made for youtube channel and facebook Cut Weld N Grind 2022-03-20 | Sticker Mule keychain stickers and custom logo review for YouTube channel : Holographic #stickermuleI ordered several stickers and keychains with a custom logo I had made from an Ebay seller. Logo cost was $15, stickers were about $13 for sets of 10. Keychains were a bit more expensive at $23 but will be mostly to give away.Sticker mule service is awesome and for being my first time I think they did a 5 star service.www.Stickermule.comContact InformationCut Weld N GrindJorge SernaP.O Box 15186Zapata Tx 78076CutWeldNGrind@yahoo.com
Testing the Primeweld CUT60 Plasma Cutter on 1/4 stainless steel plate review : #primeweld Cut Weld N Grind 2022-03-09 | Testing the Primeweld CUT60 Plasma Cutter on 1/4" stainless steel plate review : #primeweld I decided to test and review the Primeweld CUT60 on 1/4" stainless steel plate. Prime weld makes a powerful plasma cutter (cut60) capable of 7/8" on mild steel and I have cut 1" steel before. Check out my other channel if interested on mild steel test cuts.Cut Weld N GrindJorge SernaP.O Box 15186Zapata Tx 78076CutWeldNGrind@yahoo.comMild Steel 1" test cutyoutube.com/watch?v=ZOf9FsfjSjgPlasma cutter linkhttps://primeweld.com/products/cut-60...Consumables linkprimeweld.com/products/cut60-plasma-cutter-consumables-20-piece-setAmazon Linkhttps://www.amazon.com/PRIMEWELD-Non-...Here is some information from the website.PrimeWeld’s CUT60 Dual Voltage 110v/220v 60 Amp Plasma Cutter brings plenty of fabrication power to your shop. The 60 amp max rating cuts steel up to 7/8-inch thick. At 20 amps output, this plasma cutter will cut as thin as 22 gauge sheet metal. Like every PrimeWeld welding machine, we built the CUT60 Plasma Cutter to withstand the tough conditions found in real-world workplaces.Dual-Voltage Input Makes It Useful at Home or JobThis plasma cutting machine features dual-voltage input with both 120-volt and 240-volt input power. It comes with a standard 3-pole 240 power cord and an adapter to plug into 120 volts. It has go-anywhere convenience that lets you tackle really tough cutting jobs, whether you have commercial power or want to plug it in at home.POWERFUL AND READY FOR CNC PLASMA CUTTING TABLESThe PrimeWeld CUT60 110v 220v Plasma Cutter is excellent for CNC use. Plasma cutters that start the arc with high-frequency technology can interfere with digital electronics such as computers and cell phones, meaning welders can’t use them with a computer-controlled CNC plasma cutting table. This 60 amp plasma cutter solves that problem with a blowback pilot torch.
Rebuilding gooseneck trailer installing bulldog jack 10000 : Primeweld cut60 Yeswelder Arc pro 165ds Cut Weld N Grind 2022-02-28 | Rebuilding gooseneck trailer installing bulldog jack 10000 : Primeweld cut60 Yeswelder Arc pro 165dsI bought a Gooseneck trailer to rebuild and save money on the cost of a new one. I use lots of scrap which allows me to keep prices down due to inflated prices. I also own a Primeweld Cut60 plasma cutter, Hobart Champion engine driven welder, Hypertherm Powermax 45 plasma cutter and a Yeswelder Arc welder Arcpro165ds that allow me to complete this job.The Frame was damaged when the Bulldog jack got hung over a small hill. I bought a new Bulldog 10,000 jack at tractor supply for $200 after Amazon canceled my previous order of 2 jacks. This is a DIY rebuild project and I plan on hauling materials and maybe a few vehicles if I go to auction this year.Cut Weld N GrindJorge SernaP.O Box 15186Zapata Tx 78076CutWeldNGrind@yahoo.comI will add some link so you can check the specs of the equipment I used.Tractor Supply Bull Dog Jack 12000lb static 10000lbtractorsupply.com/tsc/product/bulldog-heavy-duty-square-jack-sidewind-12000-lb?cm_vc=-10005Primeweld plasma cutterprimeweld.com/products/cut-60-220v-110v-60-amp-plasma-cutterYeswelder Arcpro 165yeswelder.com/products/arc-welder-165aHobart Champion weldertractorsupply.com/tsc/product/hobart-champion-elite-dc-welder-generator?cm_vc=-10005Tagsgooseneck trailertrailer jacktrailer jack repairprimeweld cut 60 plasma cutteryeswelderyeswelder arc pro 165ds 110v-220vyeswelder arc pro 165dsgooseneck trailer repairgooseneck trailer jack repairRebuilding gooseneck trailer installing new jack and frame : Primeweld cut60 Yeswelder Arcpro 165dstrailer jack install#yeswelder#primeweldbulldog 10000 lb jack
Unboxing and testing the Primeweld cut60 plasma cutter : Quick Review and test #Primeweld #Cut60 Cut Weld N Grind 2022-02-09 | Unboxing and testing the Primeweld cut60 plasma cutter : Quick Review and test #Primeweld #Cut60 Today we do a quick unboxing, review and test on the PrimeWeld Cut60 or CUt60DP. We had lots of scrap metal and tried material between 1/8" to 1".Hope you enjoy the video and I will be using this Primeweld plasma cutter on all my videos to really put it to the test.Cut Weld N GrindJorge SernaP.O Box 15186Zapata Tx 78076CutWeldNGrind@yahoo.comwww.Primeweld.comPlasma cutter linkprimeweld.com/products/cut-60-220v-110v-60-amp-plasma-cutterAmazon Linkamazon.com/PRIMEWELD-Non-Touch-Plasma-Voltage-WARRANTY/dp/B07BYJPGB1/ref=sr_1_2?crid=1Y04WLYGA7JM1&keywords=cut+60&qid=1644375885&sprefix=cut6%2Caps%2C212&sr=8-2Here is some information from the website.PrimeWeld’s CUT60 Dual Voltage 110v/220v 60 Amp Plasma Cutter brings plenty of fabrication power to your shop. The 60 amp max rating cuts steel up to 7/8-inch thick. At 20 amps output, this plasma cutter will cut as thin as 22 gauge sheet metal. Like every PrimeWeld welding machine, we built the CUT60 Plasma Cutter to withstand the tough conditions found in real-world workplaces.Dual-Voltage Input Makes It Useful at Home or JobThis plasma cutting machine features dual-voltage input with both 120-volt and 240-volt input power. It comes with a standard 3-pole 240 power cord and an adapter to plug into 120 volts. It has go-anywhere convenience that lets you tackle really tough cutting jobs, whether you have commercial power or want to plug it in at home.POWERFUL AND READY FOR CNC PLASMA CUTTING TABLESThe PrimeWeld CUT60 110v 220v Plasma Cutter is excellent for CNC use. Plasma cutters that start the arc with high-frequency technology can interfere with digital electronics such as computers and cell phones, meaning welders can’t use them with a computer-controlled CNC plasma cutting table. This 60 amp plasma cutter solves that problem with a blowback pilot torch.SPECIFICATIONS:BREAKER SIZE:(120V) 30 amps(240V) 50 ampsPLASMA OUTPUT IN AMPS:Arc 120 volts: 20-30 ampsArc 240 volts: 20-60 ampsDUTY CYCLE:60 percent @ max rating (120/240V)100 percent @ 23 amps (120V)100 percent @ 46 amps (240V)AIR PRESSURE:40-75 PSIAIRFLOW REQUIRED:5 CFM @ 80 PSIAIR POSTFLOW:0 to 60 secondsWEIGHT:34 poundsBlowback torches use a buildup of air pressure against the material surface. That pressure forces the electrode backward into the torch when you pull the trigger, firing the torch arc. You can also drag start this torch by touching it to the cutting surface and literally dragging the torch. Use affordable, powerful, and high-quality 60 amp plasma cutter for production runs of precision-cut parts and for complex artwork.CONTINUOUS PILOT ARC FOR MESH OR PERFORATED STEELThe PrimeWeld CUT60 Plasma Cutter also offers a continuous pilot arc, cutting material like grating, mesh steel, and expanded metal with ease. When the arc is in open spaces in the metal, the torch stops cutting until it reaches another solid place, then restrikes the cutting arc.SUPPORT BY PRIMEWELD’S LEGENDARY CUSTOMER SERVICEWe connect you with real people who provide great advice and are easy to contact. They know how to troubleshoot every PrimeWeld model for optimum performance.
Yeswelder Arc pro 165ds test welds and review : $100 budget welder from Amazon with DC lift Tig Cut Weld N Grind 2022-02-02 | Yeswelder Arc pro 165ds test welds and review : $100 budget welder from Amazon with DC lift TigToday I test the welds on this Yeswelder Pro Arc 165DS which is very budget friendly at under $110 on Amazon. I ran 3 separate test on 3 separate days. The Yes Welder does have the capability to run Lift Tig but does not come with equipment for Tig Welding.Cut Weld N GrindJorge SernaP.O Box 15186Zapata Tx 78076CutWeldNGrind@yahoo.comAmazon link currently under $110amazon.com/YESWELDER-Welding-Machine-Inverter-Portable/dp/B07Q7YV2GV/ref=sr_1_11?crid=VQO7NUAYVXP8&keywords=yeswelder+arc+pro+165dc+110-220volt&qid=1643758252&sprefix=arc+165ds%2Caps%2C113&sr=8-11yeswelder.com/products/arc-welder-165aFeature:-YesWelder's flagship 165 amp ARC-165DS welder that designed with easy weld. -Select the diameter of welding electrodes, the recommend welding current will be automatically switched into, also you can adjust welding current according to your welding habit. Makes welding job So easy and comfortably.-Great performing on 7018 cellulose electrode, arc start easy, smooth weld, Powerful enough to weld 9/64" (220V) and 1/8" (110V) steel.-Portable and lightweight, so you can take it anywhere, so convenient. -The lightness and strength of its components make this a reliable welding tool for professionals or (DIY)use. Character: Model: ARC165DSRated Input Voltage: AC 110V & AC 220VFrequency: 60Hz RatedInput Current: 42A at 110V & 29A at 220VRated Output: 26.2VOutput Current: 20-165ARated Duty Cycle: 60% at 110V/130A & 60% at 220V/165AEfficiency: 85%Power Factor: 0.93Insulation Grade: HDimension: 14.5x10x6.3Net Weight: 11 lbs.Packing List:ARC-165DS Welding Machine 10 feet electrode holder cable 10 feet work clamp cable 110V & 220V power adapter Brush (for clean welding spatter)Owners Manual.COVERED ONE YEAR QUALITY LIMITED WARRANTYyeswelder.comTagsYeswelderyeswelder 165dsyeswelder 165ds reviewyeswelder 165 reviewyeswelder 165ds tigyeswelder arc pro 165dsbest cheap tig welder on amazoncheap amazon stick welderbest cheap welder on amazoncheap amazon tig weldercheap amazon welder reviewyes welderstick weldingamazon weldertig weldingtig welderamazon welder reviewyeswelder tigyes welder ac tigyeswelder 145ayeswelderyeswelder setupyes welders reviewsyeswelder 205yeswelder 250
I bought a used goose neck trailer to rebuild vs building my own trailer Cut Weld N Grind 2022-01-29 | I bought a used goose neck trailer to rebuild vs building my own trailer.I decided to purchase a used trailer and customize it to my needs. A new trailer was around $8000 plus tax and fees and I was not ready to spend that much. I searched online for 7k axles and prices were really expensive. One day I was driving to work and saw this trailer and made a deal in the afternoon. I do want to add a winch, lights, more lights and other random stuff. This is another project that I decided to tackle on and really hope it turns out just like I want.
How to build a magnetic ground clamp for mig welder out of scrap : invention tool Cut Weld N Grind 2022-01-20 | How to weld a magnetic ground clamp for mig welder out of scrap : invention tool.Today we build a magnetic ground clamp for my Titanium MiG Welder. My ground clamp on my welder was bad and decided to do a quick invention using scrap metal. The magnetic ground clamp uses a magnet from Harbor Freight with a rating of 65lbs but a 95lb is preferred.Easy welding projects to come including DIY tools and other inventions.TagsWelder groundground clampdiy magnetic ground clampdiy toolsdiy inventionswelding toolsmagnet groundhow toweldingwelderearth groundbuildclampdiy magnetic welding ground clampdiy welding ground clampdiy welding earth clampdiy magnetic welding clampdiy welding clampsmagnetic welding clampwelding ground clampmagnetic welding ground clampplasma ground clampmig welder groundbest welding ideas
First metal scrap yard visit of the year : Cool DIY projects and ideas to come Cut Weld N Grind 2022-01-08 | First metal scrap yard visit of the year : Cool DIY projects and ideas to come.So today I got to visit the scrap yard to pick up metal scrap for upcoming projects. There was some material to pick but most larger pieces got sent in December to the port where it leaves to get melted down. Now if I want to build cheap projects this is the way, sometimes new materials can be found. I enjoy looking around to see if I can build me a grill, cool project or other DIY ideas.Well hope you enjoy the quick video of my visit to the scrap yard. I will sure be welding up stuff some and sparking an ARC with my welders.TagsMetal Scrap Diy Projects ideas yardScrap Yardmetal scrapmetal scrapingscrap metal art ideasscrap metal welding ideasjunk metalscrap metal tipsscrap metal tips and tricksscrap metalMetal scrap diy projects idaes yardmetal scrappersscrap yard metalscrap metal recyclingscrap metal projects
