Unboxing the LDO Motors V1.5 Milo Mini Mill | EDGE OF 3D EDGE OF 3D 2024-03-09 | First in the LDO Milo V1.5 Build Series, Unboxing the LDO Milo V1.5 Kit from Fabreeko.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Fabreeko: fabreeko.com/collections/mini-mill/products/millennim-machines-milo-v1-5-kit-by-ldo👉 LDO Motors: docs.ldomotors.com/en/milo/milov15👉 Millennium Machines Discord: discord.gg/ubXX63vFTu👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3DPrinting #Fabreeko #LDOMilo #cnc #LDO #DIY #desktop #cncmachine #cncmachining #milling #millingmachine #millingmachines #diycncmachine #diycncmill #diycnc Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
DOES ORIENTATION MATTER | EDGE OF 3D EDGE OF 3D 2025-03-03 | Testing continues and the rabbit holes abound, does orientation matter and how much?I ramble a lot, give out some numbers but the best place to see the results is right here, this will make sense of my circle talking: tinyurl.com/57k3fujk✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM👉 Polymaker Fiberon PPS-CF and Heat Sets: youtu.be/jQvWjAtcGvU👉 Annealing Fiberon PPS-CF10: youtu.be/Kx286aI1Dz0👉 Tensile Tester V2.0: youtu.be/6uixaw8MtsU👉Polymaker Fiberon PA6-CF and PA12-CF In the Oven: youtu.be/G8NLKRwnYGU=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #petgcf #ppscf #petcf #fiberon #panchroma #voron #creality #bambu #makers #filamentDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
PPS-CF UN-ANNEALED VS ANNEALED ON IDOZ | EDGE OF 3D EDGE OF 3D 2025-03-01 | IZOD Testing Polymaker PPS-CF samples.I captured some slow-mo of both Unannealed (As Printed) and Annealed for comparison. In this IDOD (Impact) testing the annealed parts do not fare as well in the strecth department. PPS-CF is no good with respect to any kind of "shock" anyway, annealing them lowers their strength IN THIS SCENARIO ONLY.My IZON machine is built to use a scale of 0 to 100 with 0 representing the lowest impact strength and 100 being the highest impact strength. For this test I ran 3 samples of each with the "as printed" unannealed averaging a 24 and annealed averaging 22.25. Not a huge difference but as you see in the slow-mo, the "as printed" does not break clean where all 3 of the annealed break clean and fly across the room.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #petgcf #ppscf #petcf #fiberon #panchroma #voron #creality #bambu #makers #filament Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
HOW LONG DOES IT TAKE | EDGE OF 3D EDGE OF 3D 2025-02-28 | Starting new testing and the question of how long does it take to get to the center has me asking.... Lets find out.👉 "Voron Standard" Layer Height - .2mm Line Width - Forced .4mm Wall Loops - 4 Top & Bottom Layers - 5 - Monotonic Infill - 30% 3D Honeycomb Internal Solid Infill - Monotonic ✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM👉 Polymaker Fiberon PPS-CF and Heat Sets: youtu.be/jQvWjAtcGvU👉 Annealing Fiberon PPS-CF10: youtu.be/Kx286aI1Dz0👉 Tensile Tester V2.0: youtu.be/6uixaw8MtsU👉Polymaker Fiberon PA6-CF and PA12-CF In the Oven: youtu.be/G8NLKRwnYGU=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #petgcf #ppscf #petcf #fiberon #panchroma #voron #creality #bambu #makers #filamentDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
FIRST HEAT SET TEST | EDGE OF 3D EDGE OF 3D 2025-01-21 | First try testing heat set inserts.Not sure if this is a fail or not. The heat set itself never budged, the print around it failed.The test piece is Polymaker Polylite ASA printed at 260° on a 105° build plate with 4 walls, 5 top and bottom layers 15% 3D Honeycomb infill.Failure of the print itself was at 63.3kg of force, the heat set is holding strong.Will reevaluate print and try to come up with a combination that will hold till the heat set fails (if that's possible).✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#polymaker #fiberon #filament #voron #creality #bambu #bambulab #polylite #asa Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
STRESS - YES | EDGE OF 3D EDGE OF 3D 2025-01-18 | More breaking in the name of testing. Still dialing in tester, using some Polymaker Fiberon PPS-CF for this round (Not Annealed)✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#polymaker #fiberon #filament #voron #creality #bambu #bambulab #ppscf Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
REVISITING FILAMENT DRIERS | EDGE OF 3D EDGE OF 3D 2025-01-04 | I go back and look at all 4 (well...5) filament driers I currently use.I change my mind on one.........✅Amazon Affiliate Links:👉 EIBOS Polyphemus: amzn.to/3W5dEVE👉 Creality Drier 2.0: amzn.to/40jlbCq👉 Polymaker Polydryer (Not Recommended): amzn.to/401jOY0👉 Old School Dehydrator: amzn.to/3PkSBKK✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #voron #creality #bambu #fiberon #ppscf #science #creality #filament #eibos Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Heatset Overload | EDGE OF 3D EDGE OF 3D 2025-01-04 | ADD SHORT DESCRIPTION HERE✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================ADD HASHTAGSDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
TESTING V3.0 | EDGE OF 3D EDGE OF 3D 2024-12-29 | Materials Tester V3.0 running some test breaks.Have tested up to 300kg so far, working my way up to 500kg. This break was at 241kg.Sketchy? ABSOLUTELY! And 100% worth it when the material reaches catastrophic failure.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================ADD HASHTAGSDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
EIBOS Polyphemus Filament Dryer Review | EDGE OF 3D EDGE OF 3D 2024-12-28 | Testing and evaluating the EIBOS Polyphemus Filament Dryer.Also answering the question, how long does it take to get to the center (of the roll).........👉 Polyphemus from EIBOS: shop.eibos3d.com/products/pre-order-eibos-3d-filament-dryer-polyphemus?variant=43610783449267👉 Polyphemus from my Amazon Associate Account: amzn.to/41XzAFX✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Polymaker Polydryer Ecosystem: youtu.be/EvSOVE44q_c👉 Polymaker Fiberon PA6-CF and PA12-CF In the Oven: youtu.be/G8NLKRwnYGU=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #eibos #voron #creality #bambu #fiberon #ppscf #science #polyphemusDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Back To Breaking Things 3.0 | EDGE OF 3D EDGE OF 3D 2024-10-26 | Testing some Bambu filament samples a subscriber brought to me at #3DPrintopia (with a couple Polymaker thrown in since they were laying on the bench)Full video soon.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #bambulab #filament #diy #voron Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
LDO Voron 2.4 R2 Rev D First Print | EDGE OF 3D EDGE OF 3D 2024-09-18 | The #ldomotors Voron 2.4 R2 Red D built completely with Polymaker Fiberon Performance Filaments is alive and well.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226👉 Nero3D the Canuck Creator: youtube.com/@UCmV40QWkVeRs_nAvEOE_P-g 👉 Steve Builds: youtube.com/@UC8VsL6u5PiOgy6n4I4b4Ufw 👉 Fabreeko: fabreeko.com/collections/v2-4/products/ldo-voron-v2-4-kit👉 West 3D: west3d.com/products/ldo-v2-4-kit-in-stock✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Voron 2.4R2 Unboxing: youtu.be/t1Di4eXjAIU👉 Unboxing the LDO Motors V1.5 Milo Mini Mill: youtu.be/XnkwG_JAvLM👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#voron #ldomotors #fabreeko #west3d #3dprinting #polymaker #fiberon Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
EDGE OF 3D Tensile Tester V2.0 EDGE OF 3D 2024-09-11 | The quest for information continues in the form of a new tensile tester and the joy of breaking things with it.A lot of influence taken from Stefan @CNCKitchen and his original Open Pull machine.This is the first working version of my design, it does break printed samples and take Kilogram Force measurements capturing the peak on each test. I have many more data collection points I want to add and will over time. For now, I have to call this good so it can go to @_3DPrintopia and break some things there.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 JLC3DP 3D Printing Starts at $0.3, Up to $60 New User Coupons: jlc3dp.com/?from=EDGEOF3D👉 3D Printopia Test Objects STL's: drive.google.com/drive/folders/1YfIovkE23wEntmAnd5b21fGp9QJ4BA3H?usp=sharing👉 CNC Kitchen: youtube.com/@CNCKitchen👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉What is Annealing? Do You Need To?: youtu.be/6eRG5_JfIl8👉 Annealing Fiberon PPS-CF10: youtu.be/Kx286aI1Dz0👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM👉 Fiberon PPS-CF - Is It The Best Filament: youtu.be/wYFjTX-c7ms=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #voron #creality #bambu #fiberon #ppscf #science Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
New Tensile Tester Breaking Things | EDGE OF 3D EDGE OF 3D 2024-09-08 | After a month of designing, testing, machining, printing, writing code, more testing, more machining, more code, it's finally breaking printed parts the way I want it to.It has a long ways to go as there are a lot more functions I want to add but it's working "good enough" to take to 3DPrintopia in a few weeks and break some prints.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉What is Annealing? Do You Need To?: youtu.be/6eRG5_JfIl8👉 Annealing Fiberon PPS-CF10: youtu.be/Kx286aI1Dz0👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM👉 Fiberon PPS-CF - Is It The Best Filament: youtu.be/wYFjTX-c7ms=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #voron #creality #bambu #fiberon #ppscf #scienceDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Polymaker Fiberon PA6-CF and PA12-CF In the Oven | EDGE OF 3D EDGE OF 3D 2024-09-03 | Fiberon PA6-CF & PA12-CF tested in the lab for heatOne sample of each was annealed, 2 hours at 80°C followed by 16 hours at 100°C then allowed to cool to ambient in the sealed oven overnight.Results were quite interesting,PA6 did not show much difference between unannealed and annealed till the temperatures got much higher.PA12 unannealed was gone at 60° but the annealed held on for a long time then almost at the same temp it just disappeared (and started smoking, the reason for cutting them off at 200°C)✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉What is Annealing? Do You Need To?: youtu.be/6eRG5_JfIl8👉 Annealing Fiberon PPS-CF10: youtu.be/Kx286aI1Dz0👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM👉 Fiberon PPS-CF - Is It The Best Filament: youtu.be/wYFjTX-c7ms=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #voron #creality #bambu #fiberon #ppscf #science Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
What is Annealing? Do You Need To? | EDGE OF 3D EDGE OF 3D 2024-09-02 | What is Annealing and is it required?The quest for answers continues as I anneal some Polymaker Fiber PET-CF and PPS-CF then put it in a lab oven and test it under load up to 180°CThe difference is substantial and worth taking a look at.More testing to come on other materials.Print Settings:All parts printed at Voron Spec: vorondesign.comPET-CF: 70° Bed, 280° Nozzle, open chamber at Ambient, no part coolingPPS-CF: 85° Bed, 350° Nozzle, closed chamber measured 50°C +/- 5°, no part cooling✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Annealing Fiberon PPS-CF10: youtu.be/Kx286aI1Dz0👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM👉 Fiberon PPS-CF - Is It The Best Filament: youtu.be/wYFjTX-c7ms=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #voron #creality #bambu #fiberon #ppscf #science Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Voron 2.4R2 Unboxing | EDGE OF 3D EDGE OF 3D 2024-08-20 | I just received the LDO Motors Voron 2.4R2 Rev D from Jason so lets open up the box and see what is in there.I will not be doing a full build video; you can find many people on YouTube that do a much more comprehensive build series that I would do so I suggest you check them out (Links below).This printer will be built with all the printed parts done in the new Fiberon Performance filaments from Polymaker.I will post some YT Shorts as the build progresses and point out anything new in Rev D that comes up.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226👉 Nero3D the Canuck Creator: youtube.com/@UCmV40QWkVeRs_nAvEOE_P-g 👉 Steve Builds: youtube.com/@UC8VsL6u5PiOgy6n4I4b4Ufw 👉 Fabreeko: fabreeko.com/collections/v2-4/products/ldo-voron-v2-4-kit👉 West 3D: west3d.com/products/ldo-v2-4-kit-in-stock✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Unboxing the LDO Motors V1.5 Milo Mini Mill: youtu.be/XnkwG_JAvLM👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#voron #ldomotors #fabreeko #west3d #3dprinting #polymaker #fiberon Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Fiberon PPS-CF10 Failure | EDGE OF 3D EDGE OF 3D 2024-08-13 | Failure point of unannealed Fiberon PPS-CF10 in Voron Gantry test fixture.Parts were printed at Voron Standard, 345°C Hot End, 85°C Bed.Testing:Parts were clamped into test rig to simulate a toolhead on a printer. Belt was tensioned to 15 Nm and placed in a lab over at 55°C.Temperature was held at 1 hour then increased 10°C each hour till tension could no longer be maintained.At 95°C I was still able to re-tension the belt to 15 Nm with 90° of rotation on the Touque driver.At 105°C the Torque could no longer be set as the belt was slipping out of the clamps due to deformation of the teeth, the clamps and the part itself.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Fiberon PPS-CF - Is It The Best Filament: youtu.be/wYFjTX-c7ms👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM👉 Polymaker Fiberon PPS-CF and Heat Sets: youtu.be/jQvWjAtcGvU👉 Fiberon by Polymaker Launch: youtu.be/pKks9bHH0-g👉 Breaking Things in the name of....Why Not: youtube.com/shorts/dAF1jLaqGkg?feature=share=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #voron #creality #bambu #fiberon #ppscf #scienceDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Annealing Fiberon PPS-CF10 | EDGE OF 3D EDGE OF 3D 2024-08-11 | Does PPS-CF have to be annealed and why should it be annealed?I didn't know the answers to these questions, so I began testing to find out if it does need annealed and what the difference is between raw and annealed test specimens.This is just the first of many videos as I am making testing fixtures to test real world applications and find out what effects annealing has on using this material in such an application.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Fiberon PPS-CF - Is It The Best Filament: youtu.be/wYFjTX-c7ms👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM👉 Polymaker Fiberon PPS-CF and Heat Sets: youtu.be/jQvWjAtcGvU👉 Fiberon by Polymaker Launch: youtu.be/pKks9bHH0-g👉 Breaking Things in the name of....Why Not: youtube.com/shorts/dAF1jLaqGkg?feature=share=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #voron #creality #bambu #fiberon #ppscf #science Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Fiberon PPS-CF - Is It The Best Filament | EDGE OF 3D EDGE OF 3D 2024-07-25 | Polymaker Fiberon PPS-CF - Is this the GOAT filament? Lets look deeper.Testing the Fiberon PPS-CF against other popular filaments in an Izod Impact test to see if it checks all the boxes.👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226👉 Polymaker Fiberon: us.polymaker.com/pages/fiberon👉 CNC Kitchen Test Standards: patreon.com/posts/filament-test-16238656👉 Tensile test results: drive.google.com/file/d/1en9KDNgrJA8KJxTUj27f5IGfI8oRO-z9/view?usp=sharing✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Fiberon by Polymaker Launch: youtu.be/pKks9bHH0-g👉 Testing Polymaker Fiberon: youtu.be/XGWeNbi0SmM👉 Polymaker Fiberon PPS-CF and Heat Sets: youtu.be/jQvWjAtcGvU=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#polymaker #fiberon #fabreeko #voron #3dprinting #creality Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
This Is How We Do It (Break Things) | EDGE OF 3D EDGE OF 3D 2024-07-25 | Watch slow-mo destructive testing of Polymaker Filaments featuring the new Fiberon PPS-CF, PET-CF and PETG-CF✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#polymaker #fiberon #3dprinting #voron #creality #filament Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Polymaker Fiberon PPS-CF and Heat Sets | EDGE OF 3D EDGE OF 3D 2024-07-19 | Can you put heat sets in the new PPS-CF from Polymaker?We find out.Want to see how strong it is? Jump to 13:25, take off your headphones and watch.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226👉 CNC Kitchen Heat Set....Set: https://cnckitchen.store/products/ts100-101-adapter-tips-set-m2-x-m3-m4-m5-m6-1-4-m8-100-lead-and-cadmium-free👉 TS101 Soldering Iron: amzn.to/3Lu04VN👉 Stealth Press Heat Set Tool: printables.com/model/609644-stealth-press-heat-set-insert-pressVoron Standards: 0.2mm Layer Height0.4mm forced line width4 walls5 top/bottom layers40% infill (Grid, Gyroid, Honeycomb, Triangle or Cubic#voron vorondesign.com✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Fiberon by Polymaker Launch | EDGE OF 3D youtu.be/pKks9bHH0-g👉 Testing Polymaker Fiberon | EDGE OF 3D youtu.be/XGWeNbi0SmM=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#polymaker #3dprinting #voron #fiberon #ppscf #makers #3dprinterfilament Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Milo Mill Making Noise | EDGE OF 3D EDGE OF 3D 2024-07-13 | Using the Milo Mini Mill from #ldomotors and #fabreeko to mill some weight out of the hammer head on my Izod sheer tester.👉 Chip Vacuum Collection Shoe:makerworld.com/en/models/549300printables.com/model/949005-ldo-milo-mini-mill-chip-shoe✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#cncmilling #minimill #desktopcnc #milominimill #milo #maker #makers #makingchipsfly #ldo #ldomotors #fabreekoDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Testing Polymaker Fiberon | EDGE OF 3D EDGE OF 3D 2024-07-06 | How strong is the new Fiberon filaments from Polymaker? We build a tension testing device and break some parts. More testing to come........👉 *** UPDATED WITH DRY FILAMENT*** Results: drive.google.com/file/d/1en9KDNgrJA8KJxTUj27f5IGfI8oRO-z9/view?usp=sharing👉 Graphed Results: drive.google.com/file/d/1oSrUU3rFYprsBgkB88ldkK9CegcoeKQP/view?usp=sharing👉 CNC Kitchen Test Model (printed at 75% scale): printables.com/model/99053-cnc-kitchen-test-hook👉 CNC Kitchen Test Standards: patreon.com/posts/filament-test-16238656👉 Meter: amzn.to/4cQs9m4👉 Polymaker Fiberon Line: fiberon.polymaker.com✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Fiberon by Polymaker Launch | EDGE OF 3D youtu.be/pKks9bHH0-g👉 Polymaker Fiberon PPS-CF and Heat Sets | EDGE OF 3D youtu.be/jQvWjAtcGvU=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #petgcf #ppscf #petcf #fiberon #panchroma #voron #creality #bambu #makers #filament Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Tensile Tester 1st Run | EDGE OF 3D EDGE OF 3D 2024-06-30 | I needed something to test the new Polymaker Fiberon line of filaments so I purchased a meter and used parts left over from printers, DeathRacers and Dragsters to make a tensile strength tester.1st runs done with Polymaker ASAFirst test was printed using Voron standards and it overloaded the tester.Second test same Voron standards printed at 75% ScaleThird test CNC Kitchen standards for the test hook.Test Hook: printables.com/model/99053-cnc-kitchen-test-hookCNC Kitchen standard: patreon.com/posts/filament-test-16238656Voron Trident standard: github.com/VoronDesign/Voron-Trident/blob/main/Manual/Assembly_Manual_Trident.pdfMeter: amzn.to/3RNdq2Y✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#cnckitchen #voron #polymaker #fiberon #3dprinter #3dprinting #filament Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Fiberon by Polymaker Launch | EDGE OF 3D EDGE OF 3D 2024-06-25 | 2 New lines of filament from Polymaker, Fiberon and Panchroma.We will take a look at the 3 new "engineering" Carbon Fiber filaments Polymaker just announced.PPS-CF10, A Polyphenylene Sulfide filament with Carbon FiberPET-CF17, A Polyethylene terephthalate filament with Carbon FiberPETG-rCF08, A Polyethylene Terephthalate Glycol-modified filament with recycled Carbon Fiber sourced from end-of-life Wind Turbine Blades and are certified to the Global Recycled Standard by TÜV Rheinland (tuv.com/usa/en)Polymaker Fiberon: us.polymaker.com/pages/fiberonAlso launched today is a very colorful line promising to have a wide choice of colors and surface finishes named Panchroma.Polymaker Panchroma: panchroma.polymaker.comHome Made Istagoo (Not my recipe or idea but I use it exclusively): https://goo.by.frank.af/Fidget Gear Model: printables.com/model/232551✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Testing Polymaker Fiberon | EDGE OF 3D youtu.be/XGWeNbi0SmM👉 Polymaker Fiberon PPS-CF and Heat Sets | EDGE OF 3D youtu.be/jQvWjAtcGvU=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #polymaker #petgcf #ppscf #petcf #fiberon #panchroma #voron #creality #bambu #makers #filament Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
WHAT IS THIS | EDGE OF 3D EDGE OF 3D 2024-06-23 | Something new in the lab, what is it?Find out, 1100 CST 25JUN2024✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================ADD HASHTAGSDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
PolyDryer by Polymaker - A Deeper Look | EDGE OF 3D EDGE OF 3D 2024-05-11 | The new modular filament drying and storage system by Polymaker.I answer the question, will it dry Nylon.......✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Affiliate Link: us.polymaker.com/?aff=226👉 Desiccant Funnel: makerworld.com/en/models/456407✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#polymaker #polydryer #3dprinting #3dprinter #3dprinterfilament #fabreeko Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
First Look at the RatRig V-Core-4 | EDGE OF 3D EDGE OF 3D 2024-05-06 | Just back from RMRRF24 with the RatRig V-Core-4Let take a closer look at the all new hybrid core XY release from RatRig.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 RatRig: us.ratrig.com👉 Fabreeko: fabreeko.com/collections/ratrig👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#ratrig #3dprinter #rmrrf #fabreeko #makers #diy Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
RatRig V-Core 4 doing RatRig Vcore-4 Things | EDGE OF 3D EDGE OF 3D 2024-04-27 | Short timelapse of the V-Core 4 printing handwheels for the Millennium Milo Mini Mill.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#vcore #ratrig #3dprinting #3d #fabreeko #edgeof3dDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
RatRig V-Core 4 In The Studio | EDGE OF 3D EDGE OF 3D 2024-04-24 | The new RatRig V-Core 4 fresh from RMRRF in the Edge Of 3D studio.Stick around and subscribe for more video's of the all new V-Core 4 300 in person.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Fabreeko: fabreeko.com👉 RatRig V-Core 4: v-core4.ratrig.com👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#ratrig #vcore #fabreeko #3dprinting Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
One The RRF Road 2024 | EDGE OF 3D EDGE OF 3D 2024-04-07 | Preparing the Polymaker/Fabreeko show trailer for the 2024 RepRap Festival season.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #3dprinters #polymaker #fabreeko #reprap #rmrrf #errf #3dprintopia #ldo #ldomotors #bigtreetech #biqu #btt #ratrigDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Milo V1.5 Z-Axis Assembly | EDGE OF 3D EDGE OF 3D 2024-03-30 | Assembly of the X-Axis on the Millennium Machines Milo V1.5 by LDO Motors.Step by step assembly of the X-Axis for the Millennium Machines Milo V1.5 mini mill. LDO Motors kit provided by Fabreeko, printed in Polymaker Pop Green and Jet Black ASA.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Steve Builds Channel - youtube.com/@SteveBuilds👉 Fabreeko: fabreeko.com/collections/mini-mill/products/millennim-machines-milo-v1-5-kit-by-ldo👉 LDO Motors: docs.ldomotors.com/en/milo/milov15👉 Millennium Machines Discord: discord.gg/ubXX63vFTu👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226 ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Unboxing the LDO Motors V1.5 Milo Mini Mill | EDGE OF 3Dyoutu.be/XnkwG_JAvLM👉 Milo V1.5 Y-Axis Assembly | EDGE OF 3Dyoutu.be/smI64mWqpgs=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3DPrinting #Fabreeko #LDOMilo #cnc #LDO #DIY #desktop #cncmachine #cncmachining #milling #millingmachine #millingmachines #diycncmachine #diycncmill #diycnc Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Milo V1.5 X-Axis Assembly | EDGE OF 3D EDGE OF 3D 2024-03-23 | Assembly of the X-Axis on the Millennium Machines Milo V1.5 by LDO Motors.Step by step assembly of the X-Axis for the Millennium Machines Milo V1.5 mini mill. LDO Motors kit provided by Fabreeko, printed in Polymaker Pop Green and Jet Black ASA.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Steve Builds Channel - youtube.com/@SteveBuilds👉 Fabreeko: fabreeko.com/collections/mini-mill/products/millennim-machines-milo-v1-5-kit-by-ldo👉 LDO Motors: docs.ldomotors.com/en/milo/milov15👉 Millennium Machines Discord: discord.gg/ubXX63vFTu👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226 ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Unboxing the LDO Motors V1.5 Milo Mini Mill | EDGE OF 3Dyoutu.be/XnkwG_JAvLM👉 Milo V1.5 Y-Axis Assembly | EDGE OF 3Dyoutu.be/smI64mWqpgs=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3DPrinting #Fabreeko #LDOMilo #cnc #LDO #DIY #desktop #cncmachine #cncmachining #milling #millingmachine #millingmachines #diycncmachine #diycncmill #diycnc Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Milo V1.5 Y-Axis Assembly | EDGE OF 3D EDGE OF 3D 2024-03-16 | Assembly of the Y-Axis on the Millennium Machines Milo V1.5 by LDO Motors.Step by step assembly of the Y-Axis for the Millennium Machines Milo V1.5 mini mill. LDO Motors kit provided by Fabreeko, printed in Polymaker Pop Green and Jet Black ASA.✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Steve Builds Channel - youtube.com/@SteveBuilds👉 Fabreeko: fabreeko.com/collections/mini-mill/products/millennim-machines-milo-v1-5-kit-by-ldo👉 LDO Motors: docs.ldomotors.com/en/milo/milov15👉 Millennium Machines Discord: discord.gg/ubXX63vFTu👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3DPrinting #Fabreeko #LDOMilo #cnc #LDO #DIY #desktop #cncmachine #cncmachining #milling #millingmachine #millingmachines #diycncmachine #diycncmill #diycnc Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Airless Basketball in TPU #sketchy | EDGE OF 3D EDGE OF 3D 2024-03-15 | Printing the airless basketball full size.Printing on a Creality K1 Max in Polymaker TPU 95a with no support. The flexible filament is showing its flexibility as the ball wobbles all around the chamber.Will it finish --------- Stick Around!✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226👉 K1: http://tinyurl.com/EDGEOF3DK1👉 K1 MAX: http://tinyurl.com/EDGEOF3DK1MAX👉 K1C: http://tinyurl.com/EDGEOF3DK1C👉 Dry Box 2.0: http://tinyurl.com/EDGEOF3DDRYBOX20✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#airlessbasketball #wilson #basketball #wilsonbasketball #airless #gen1 Disclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
SOMETHING ARRIVED TODAY | EDGE OF 3D EDGE OF 3D 2024-03-07 | Came home from the office to find 2 20# boxes from Fabreeko/LDO that I did not order....... Stay Tuned ;-)✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Fabreeko: fabreeko.com/collections/mini-mill/products/millennim-machines-milo-v1-5-kit-by-ldo👉 LDO Motors Milo 1.5: docs.ldomotors.com/en/milo/milov15👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================ADD HASHTAGSDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Mainsail on the Creality K1 series | EDGE OF 3D EDGE OF 3D 2024-03-03 | You have your printer rooted, you've opened Mainsail and what to do next?In this video, I will show you a small sample of the many ways Mainsail can be customized to fit your style. Beginning with making the camera work to organizing macros for improved workflow and ending with setting the machine control panel to the style you find best for your use.There are many macros included when setting up Mainsail for the first time using the installation helper script from Guilouz and I will show you a brief overview of how I handle organizing them for my own use.If you have not rooted your K1 series printer yet, please follow my guide video here: youtu.be/E_SlgzL4bIo first.Once you have your K1 rooted, take the time to look through the comprehensive guide provided by Guilouz here: github.com/Guilouz/Creality-K1-and-K1-Max/wiki to better understand what each macro does and how to use it properly.TITLE : MAINSAIL ON THE CREALITY K1 SERIES | EDGE OF 3D✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226👉 K1: http://tinyurl.com/EDGEOF3DK1👉 K1 MAX: http://tinyurl.com/EDGEOF3DK1MAX👉 K1C: http://tinyurl.com/EDGEOF3DK1C👉 Dry Box 2.0: http://tinyurl.com/EDGEOF3DDRYBOX20✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3DPrinting #CrealityK1Max #Firmware #Moonraker #Fluidd #Mainsail #DIY #3DPrinterModsDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
SOMETHING MEDIEVAL COMING SOON | EDGE OF 3D EDGE OF 3D 2024-03-01 | Special project for one of my channel partners..... More to come ;-)✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3dprinting #gamingDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Master Your K1 Series 3D Printer: Ultimate Bed Leveling Guide | EDGE OF 3D EDGE OF 3D 2024-02-15 | In this video, I provide a comprehensive walkthrough on fine-tuning the bed of a K1 series 3D printer. Discover the art of bed adjustment through various methods, from tweaking screws to employing spacers for impeccable leveling. I dive deep into pre-adjustment preparations and step-by-step disassembly of the extruder assembly, ensuring a smooth leveling process despite potential hurdles like uneven surfaces and probe point variances. Embrace the transformative impact of these techniques on your 3D printing experience.The video is about "Master Your K1 Series 3D Printer: Ultimate Bed Leveling Guide" but also tries to cover the following subject: Enhance Printing PrecisionSimplify Maintenance TasksBoost Print QualityTITLE : Master Your K1 Series 3D Printer: Ultimate Bed Leveling Guide | EDGE OF 3D✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226👉 K1: http://tinyurl.com/EDGEOF3DK1👉 K1 MAX: http://tinyurl.com/EDGEOF3DK1MAX👉 K1C: http://tinyurl.com/EDGEOF3DK1C👉 Dry Box 2.0: http://tinyurl.com/EDGEOF3DDRYBOX20✅ Stay Connected With Me: 👉 TikTok : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY👉 Transform Your Ender 3: The Ultimate Core XY Conversion Tutorial | EDGE OF 3Dyoutube.com/watch?v=fNhd-7ei7ks👉 Ender 3 V2 Conveyor Belt Upgrade: Setup Explained and First Impressions | EDGE OF 3Dyoutube.com/watch?v=xXFf7Te2moI =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#k1series #bedleveling #3dprinting #printerbed #adjustment #spacers #calibration #3dprintertipsDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
How to Easily Update Firmware on Your Rooted K1 & K1MAX | EDGE OF 3D EDGE OF 3D 2024-02-05 | Join me, Scott from Edge of 3D, as I navigate through the complexities of updating firmware on rooted Creality K1 and K1MAX 3D printers. Whether you're satisfied with your current setup or eager for the latest features, I offer tailored solutions for managing update notifications and preserving your custom configurations. Dive into the specifics with me on installing new firmware without losing your personalized settings like bed leveling and motor currents, all while avoiding common pitfalls in the 'include' files transition.The video is about "How to Easily Update Firmware on Your Rooted K1 & K1MAX" but also tries to cover the following subject: Update Without Losing DataCustomize Your 3D PrinterAdvanced Firmware TipsTITLE : How to Easily Update Firmware on Your Rooted K1 & K1MAX | EDGE OF 3D✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226👉 K1: http://tinyurl.com/EDGEOF3DK1👉 K1 MAX: http://tinyurl.com/EDGEOF3DK1MAX👉 K1C: http://tinyurl.com/EDGEOF3DK1C👉 Dry Box 2.0: http://tinyurl.com/EDGEOF3DDRYBOX20✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#firmwareupdate #rootedk1 #k1max #customfirmware #3dprintermods #moonrakermainsail #firmwaretips #techguidesDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
How to Easily Root Your Creality K1 Max: Ultimate Guide | EDGE OF 3D EDGE OF 3D 2024-01-27 | Unlock the full potential of your Creality K1 Max with our comprehensive guide to rooting and installing Moonraker, Fluidd, and Mainsail firmware. Follow along as we provide step-by-step instructions and tips to enhance your 3D printing experience. Learn how to customize your printer and explore new possibilities in this in-depth tutorial.Installation Script GitHub: github.com/Guilouz/Creality-K1-and-K1-Max/wikiElements I install: 1,2,3,4,5,7,8,9,10,11,12,13,14,15 & 16Creality Affiliate Links:K1: http://tinyurl.com/EDGEOF3DK1K1 MAX: http://tinyurl.com/EDGEOF3DK1MAXK1C: http://tinyurl.com/EDGEOF3DK1CDry Box 2.0: http://tinyurl.com/EDGEOF3DDRYBOX20The video is about "How to Easily Root Your Creality K1 Max: Ultimate Guide" but also tries to cover the following subjects:Firmware customizationPrinter performance optimizationDIY 3D printing upgradesTITLE : How to Easily Root Your Creality K1 Max: Ultimate Guide | EDGE OF 3D✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3Dyoutube.com/watch?v=ZQZfyQjZwxk👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#3DPrinting #CrealityK1Max #Firmware #Moonraker #Fluidd #Mainsail #DIY #3DPrinterModsDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3D EDGE OF 3D 2023-10-15 | Dive into the first 90 days with the Creality K1 through the ups and downs of this 3D printing journey. From initial excitement to tackling challenges, discover why this printer still captures the heart.Creality Affiliate Links:K1: http://tinyurl.com/EDGEOF3DK1K1 MAX: http://tinyurl.com/EDGEOF3DK1MAXK1C: http://tinyurl.com/EDGEOF3DK1CDry Box 2.0: http://tinyurl.com/EDGEOF3DDRYBOX20The video is about "Creality K1 After 90 Days: Regrets or Worth Every Penny?" but also tries to cover the following subject:Creality K1 insights3D printing journeyTech review highlightsTITLE : Creality K1 After 90 Days: Regrets or Worth Every Penny? | EDGE OF 3D✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3Dyoutube.com/watch?v=rJOOL7xCT9Y👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY👉 Transform Your Ender 3: The Ultimate Core XY Conversion Tutorial | EDGE OF 3Dyoutube.com/watch?v=fNhd-7ei7ks=============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#crealityk1 #90daychallenge #3dprinting #userexperience #techreview #diyprojectsDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3D EDGE OF 3D 2023-10-08 | Dive into the unveiling of the Creality K1 Max as we explore its setup and deliver a first-hand look at printing a 3D scan of my head using the CR-Scan Ferret Pro. This video walks you through the unboxing process to the first print, showcasing the impressive capabilities of the K1 Max and the precision of Creality's 3D scanning technology. Whether you're new to 3D printing or looking to upgrade your setup, join us for an insightful journey into the future of personal manufacturing.Creality Affiliate Links:K1: http://tinyurl.com/EDGEOF3DK1K1 MAX: http://tinyurl.com/EDGEOF3DK1MAXK1C: http://tinyurl.com/EDGEOF3DK1CDry Box 2.0: http://tinyurl.com/EDGEOF3DDRYBOX20Creality Official Link:store.creality.com/products/k1-max-3d-printerThe video is about "Creality K1 Max: Detailed Unboxing & First 3D Print Experience" but also tries to cover the following subject:3D Printing InnovationsAdvanced Scanning TechniquesPersonal Manufacturing InsightsTITLE : Creality K1 Max: Detailed Unboxing & First 3D Print Experience | EDGE OF 3D✅ Subscribe To My Channel For More Videos: youtube.com/@EDGEOF3D/?sub_confirmation=1✅ Important Links: 👉 Polymaker Filament Affiliate Link: us.polymaker.com/?aff=226✅ Stay Connected With Me: 👉 (X)Twitter : twitter.com/edgeof3d ==============================✅ Other Videos You Might Be Interested In Watching: 👉 How to Upgrade Ender 3: BTT Manta E3EZ Board & CB1 SBC Full Installing Tutorial | EDGE OF 3Dyoutube.com/watch?v=U-qF3woumt4👉 How to 3D Print a Perfect Benchy Speedboat on Ender 3 Core XY with Aditiva3D! | EDGE OF 3Dyoutube.com/watch?v=uQY4ziDPExY👉 Transform Your Ender 3: The Ultimate Core XY Conversion Tutorial | EDGE OF 3Dyoutube.com/watch?v=fNhd-7ei7ks👉 Ender 3 V2 Conveyor Belt Upgrade: Setup Explained and First Impressions | EDGE OF 3Dyoutube.com/watch?v=xXFf7Te2moI =============================✅ About EDGE OF 3D: Welcome to EDGE OF 3D. Dive into the exciting world of additive manufacturing with our channel, where we showcase top-notch 3D printers, provide step-by-step tutorials for printer enthusiasts, and explore a wide range of cutting-edge technologies, from 3D scanners to laser engravers and desktop milling machines. Join us on this journey of creativity and innovation in the realm of 3D printing and beyond.For Collaboration and Business inquiries, please use the contact information below:📩 Email: catalinaflyer@gmail.com🔔 Subscribe to my channel for more videos: youtube.com/@EDGEOF3D/?sub_confirmation=1=====================#crealityk1max #unboxing #firstprint #3dscanner #3dprinting #technology #innovationDisclaimer: We do not accept any liability for any loss or damage which is incurred from you acting or not acting as a result of reading any of our publications. You acknowledge that you use the information we provide at your own risk. Do your own research. Copyright Disclaimer: Under Section 107 of the Copyright Act 1976, allowance is made for "fair use" for purposes such as criticism, comment, news reporting, teaching, scholarship and research. Fair use is a use permitted by copyright statute that might otherwise be infringing. Non-profit, educational or personal use tips the balance in favor of fair use© EDGE OF 3D
Edge of 3D has landed in Taipei EDGE OF 3D 2023-08-26 | Made it to Taipei for an overnight at the Novatel Hotel right on the airport. Going to spend the night spotting planes.....
Inside Creality Shenzhen China EDGE OF 3D 2023-08-23 | First day at Creality in Shenzhen China, just a quick video of some of what I got to see today.Keep an eye out at youtube.com/@TheRealSamPrentice for MUCH more from this epic trip the first time Creality has invited western YouTube influncers/content creators to their headquarters.
