Uploaded October 2023 | Updated September 2026, 2 weeks ago
#xtool #laserengraver
FREE AIR ASSIST AND HONEYCOMB TILL NOV 2ND - To Purchase - bit.ly/3Fo9kHZ
40W $2,199.00 USD - 20W $1,699.00 USD
US Store: bit.ly/3Fo9kHZ
EU Store: bit.ly/46EhQyz
UK Store: bit.ly/46Otnv4
DE Store: bit.ly/46PoKkA
@xToollaser
xTool S1 is the world's first 40W enclosed diode laser cutter. With various laser modules and an expansive accessory matrix, it fulfills diverse DIY requirements, unlocking endless creative possibilities for users
The World's First 40W Enclosed Diode Laser
The first Class-1 safety certification enclosed 40W diode laser machine, it’s eye-friendly and you can run it without wearing protective goggles
Faster & Stable Speed
Stable performance at 600mm/s. Although it's not the fastest among open diode laser cutters, it delivers the best results at its speed.
Brand New Positioning Method
Twin-point Positioning, without camera but better than camera. It enables more precise engraving and supports curved surface engraving.
Dynamic-Focus Engraving
Autofocus system
Accessories
Interchangeable laser modules, Riser Base and Automatic Conveyor Feeder.
This is an Approved by IEC Class 1 laser safety certification 20/40w enclosed laser engraver!
With safety features like!
① Full-enclosed: The xTool S1 features a fully enclosed, fire-resistant shell design, ensuring no laser leakage.
② Eye-friendly: A large, high-transparency cover offers excellent dual-wavelength filtering capabilities (diode laser and 1064nm Infrared laser), freeing you from cumbersome protective glasses while letting you clearly observe every step of the processing.
③ Powerful smoke exhaust: Robust smoke extraction safeguards your health. Additionally, it comes with an extremely powerful active exhaust fan that rapidly discharges harmful gases produced during laser processing, ensuring your safety and well-being.
① 5-direction flame detection: An enhanced 5-way(four baffles and a laser module) flame sensor system offers superior flame detection.
Walter White -
etsy.com/listing/1252335523/charcuterie-board-laser-engraving-file?ref=yr_purchases
Measuring Sizes -
etsy.com/listing/856289857/kitchen-svg-mason-jar-svg-kitchen?ref=yr_purchases
#Lightburn Software
lightburnsoftware.com
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 #tycoon #tycoonslim #tycoonmax, ATOMSTACK A5, #ATOMSTACK #ortur #xtool #laserbox #thangs #40watt 40 Watt laser #thangs.com #xtool #xtools1
#xtool #laserengraver
FREE AIR ASSIST AND HONEYCOMB TILL NOV 2ND - To Purchase - bit.ly/3Fo9kHZ
40W $2,199.00 USD - 20W $1,699.00 USD
US Store: bit.ly/3Fo9kHZ
EU Store: bit.ly/46EhQyz
UK Store: bit.ly/46Otnv4
DE Store: bit.ly/46PoKkA
@xToollaser
xTool S1 is the world's first 40W enclosed diode laser cutter. With various laser modules and an expansive accessory matrix, it fulfills diverse DIY requirements, unlocking endless creative possibilities for users
The World's First 40W Enclosed Diode Laser
The first Class-1 safety certification enclosed 40W diode laser machine, it’s eye-friendly and you can run it without wearing protective goggles
Faster & Stable Speed
Stable performance at 600mm/s. Although it's not the fastest among open diode laser cutters, it delivers the best results at its speed.
Brand New Positioning Method
Twin-point Positioning, without camera but better than camera. It enables more precise engraving and supports curved surface engraving.
Dynamic-Focus Engraving
Autofocus system
Accessories
Interchangeable laser modules, Riser Base and Automatic Conveyor Feeder.
This is an Approved by IEC Class 1 laser safety certification 20/40w enclosed laser engraver!
With safety features like!
① Full-enclosed: The xTool S1 features a fully enclosed, fire-resistant shell design, ensuring no laser leakage.
② Eye-friendly: A large, high-transparency cover offers excellent dual-wavelength filtering capabilities (diode laser and 1064nm Infrared laser), freeing you from cumbersome protective glasses while letting you clearly observe every step of the processing.
③ Powerful smoke exhaust: Robust smoke extraction safeguards your health. Additionally, it comes with an extremely powerful active exhaust fan that rapidly discharges harmful gases produced during laser processing, ensuring your safety and well-being.
① 5-direction flame detection: An enhanced 5-way(four baffles and a laser module) flame sensor system offers superior flame detection.
Walter White -
etsy.com/listing/1252335523/charcuterie-board-laser-engraving-file?ref=yr_purchases
Measuring Sizes -
etsy.com/listing/856289857/kitchen-svg-mason-jar-svg-kitchen?ref=yr_purchases
#Lightburn Software
lightburnsoftware.com
Disclaimer - This is an instructional video only - I assume no responsibility if you do not become a pro after watching this video. This video is for learning purposes only, you are following the steps in this video at your own risk!
facebook.com/tripodsgarage
twitter.com/tripodsgarage
instagram.com/tripodsgarage
Thanks for watching - Please Like and Subscribe!
Tags
Kywoo, Tycoon, Tycoon Max, Tycoon Slim, CR6-SE, CR6SE, 32-Bit Control Board, TMC2209 Stepper Motor Driver, 3D Printer, 3D Printing, CR-10, CR-10s, Ender 3, Ender 3Pro, Ender 5 Pro, Ender 5, creality silent board, silent board, BIRGTREETECH, SKR CR6V1.0 #tycoon #tycoonslim #tycoonmax, ATOMSTACK A5, #ATOMSTACK #ortur #xtool #laserbox #thangs #40watt 40 Watt laser #thangs.com #xtool #xtools1
