XLT F100 door panels in a '72. not as easy as you might think. #f100 #autorestomod #f100nation @AutoRestoMod

Uploaded May 2025 | Updated September 2026, 6 hours ago

XLT F100 door panels in a 72. not as easy as you might think. #f100 #autorestomod #f100nation

$Make a Clean Looking Mustang Charging & Starting System Every wiring job teaches you something — and on Kylies 1967 Mustang, it taught me a few things the hard way. In this episode we tackle the charging and battery cable system for a CVF serpentine setup running a 100-amp alternator and a front-mounted Group 24F battery, and I walk through the mistakes I made so you dont have to repeat them. We get into lug sizing — why 5/16 and 3/8 matter and where each one belongs — adding a fusible link close to the battery with a 125-amp Maxi fuse, why a proper block-to-firewall ground is non-negotiable on a Ford, and how to crimp clean, marine-grade welding-wire cables that wont corrode down the road. At the end, I lay out every cable length and lug size we used so you can build the same system in your own 67–68 Mustang or Cougar. Final cable notes include: Positive battery cable to starter solenoid: 24 inches Starter solenoid to Maxi fuse: 12 inches Maxi fuse to alternator: 7 feet 3 inches Negative battery cable to engine block: 36 inches Starter solenoid to starter: 30-32 inches Cables and welding wire from the folks at Fast and Quiet. Serpentine system and 100-amp alternator by CVF. ▶ Starter solenoid & Mustang restoration parts — National Parts Depot: [https://www.npdlink.com/] ▶ Charging system & 100-amp alternator — CVF: [https://cvfracing.com/] ▶ Battery cables & welding wire — Fast and Quiet: [https://www.fastandquiet.com/] Its not a problem, its a project. Parts: Starter Solenoid Relay Switch, Black Case, C4AF11450A, FoMoCo, REPCO, coarse threads https://www.npdlink.com/product/starter-solenoid-relay-switch-black-case-c4af11450a-fomoco-repco-coarse-threads/101239?backurl=search%2Fproducts%3Fcompany_name%3D%26search_started_at%3D1781909244920%26search_terms%3Dstarter%252Bsolenoid%26top_parent%3D0%26year%3D&search_started_at=1781909244920 Autorestomod Episode: 746 SUPPORT THE SHOW ▶ Patreon — $10/month gets you monthly Zoom meetings with me: [https://www.patreon.com/c/gasolinemedia] ▶ Merch — Needs More Classic Cars shirts, hats & mugs at Fourth Wall: [https://autorestomod-shop.fourthwall.com/] Sponsors: https://www.nationalpartsdepot.com https://www.eatondetroitspring.com Contact: Jford@autorestomod.com Insta: @autorestomod www.patreon.com/gasolinemedia. #Autorestomod #1967Mustang #Restomod #ClassicCarRestoration #AutomotiveWiring$

Seat Was STUCK — You Wont Believe the Rust Underneath 1967 Mustang

Happy Fourth of July! Mach 1 Burnout Video

Wheel Studs Done Right + Big Plans for My 1964 Falcon (347 & 5-Speed)

The Brutal Reality of Cowl Rust Repair on a 1970 Torino GT

1972 Mach 1 Finally in the Shop — But How Deep Should We Go With This Restoration?

Drum Brake Tools You Need to Have for Your Classic Car