Uploaded January 2026 | Updated November 2026, 4 days ago
Build a Dual-Band Wi-Fi Analyzer using the XIAO ESP32-C5, the first XIAO with 5GHz Wi-Fi!
Article with code: dronebotworkshop.com/xiao-esp32-c5
More articles and tutorials: dronebotworkshop.com
Join the conversation on the forum: forum.dronebotworkshop.com
Subscribe to the newsletter and stay in touch: dronebotworkshop.com/subscribe
It’s a new Seeeduino XIAO, and it’s an inexpensive IoT powerhouse! The Seeeduino XIAO ESP32-C5 is one of the first development boards powered by the amazing Espressif ESP32-C5, a microcontroller built with IoT in mind.
The ESP32-C5 is a powerful, single-core 32-bit MCU that runs at 240 MHz. It is one of the first ESP32 chips to support Wi-Fi 6, and has both 2.4 and 5 GHz Wi-Fi. It also supports BLE 5, Matter, Zigbee, and Thread.
It also features a power management system that can put the board into Deep Sleep to drastically improve battery life. And speaking of batteries, the XIAO ESP32 has a built-in battery charger, so you can run everything from a 3.7-volt LiPo or LION battery.
We’ll take a look at this new microcontroller board, and then we’ll put our knowledge to use and build a dual-channel Wi-Fi signal analyzer with an LCD screen. It's a really fast project, since we can just modify some sample code from the display graphics library.
Here is the content of today's video:
00:00 - Introduction
01:45 - XIAO ESP32-C5
06:10 - IDE Setup and Testing
07:43 - XIAO ESP32-C5 Connectivity
13:31- XIAO ESP32-C5 Low Power
18:36 - Build a Dual-Band Wi-Fi Scanner
23:43 - Conclusion
This powerful board retails for under 7 US dollars, so it certainly won’t break the bank. With its multiple connectivity options and low-power features, this is sure to become the heart of many innovative IoT projects.
I hope you enjoy the video!
Bill
Build a Dual-Band Wi-Fi Analyzer using the XIAO ESP32-C5, the first XIAO with 5GHz Wi-Fi!
Article with code: dronebotworkshop.com/xiao-esp32-c5
More articles and tutorials: dronebotworkshop.com
Join the conversation on the forum: forum.dronebotworkshop.com
Subscribe to the newsletter and stay in touch: dronebotworkshop.com/subscribe
It’s a new Seeeduino XIAO, and it’s an inexpensive IoT powerhouse! The Seeeduino XIAO ESP32-C5 is one of the first development boards powered by the amazing Espressif ESP32-C5, a microcontroller built with IoT in mind.
The ESP32-C5 is a powerful, single-core 32-bit MCU that runs at 240 MHz. It is one of the first ESP32 chips to support Wi-Fi 6, and has both 2.4 and 5 GHz Wi-Fi. It also supports BLE 5, Matter, Zigbee, and Thread.
It also features a power management system that can put the board into Deep Sleep to drastically improve battery life. And speaking of batteries, the XIAO ESP32 has a built-in battery charger, so you can run everything from a 3.7-volt LiPo or LION battery.
We’ll take a look at this new microcontroller board, and then we’ll put our knowledge to use and build a dual-channel Wi-Fi signal analyzer with an LCD screen. It's a really fast project, since we can just modify some sample code from the display graphics library.
Here is the content of today's video:
00:00 - Introduction
01:45 - XIAO ESP32-C5
06:10 - IDE Setup and Testing
07:43 - XIAO ESP32-C5 Connectivity
13:31- XIAO ESP32-C5 Low Power
18:36 - Build a Dual-Band Wi-Fi Scanner
23:43 - Conclusion
This powerful board retails for under 7 US dollars, so it certainly won’t break the bank. With its multiple connectivity options and low-power features, this is sure to become the heart of many innovative IoT projects.
I hope you enjoy the video!
Bill



![News from the Workshop (+ New Videos Coming Soon)
Here is the reason that there have not been any videos recently. The good news is that there will be new ones very soon!
If you have any stroke recovery stories that you would like to share, please email them to info[at]dronebotworkshop[dot]com. My mother finds these very inspirational. Thank you! News from the Workshop (+ New Videos Coming Soon)](https://i.ytimg.com/vi/4-z8MIrc1SE/mqdefault.jpg)






