Uploaded September 2022 | Updated November 2026, 3 hours ago
In this week’s wood turning video, I will put a unique twist to a wood turned weed or twig pot.
These are taken from a flat plank of Mahogany and turned round in side grain orientation, I then used a vacuum chuck to secure the piece to the lathe so I could make a disk.
A portion of this disk was cut at the miter saw and then a hole was drilled for the dried flowers.
I’ve got all kinds of ideas to try with the vacuum chuck but as you guys hear it is a bit loud so you might have to deal with more of Harry’s singing.
The vacuum chuck which I’m using comes from Douglas Long at Odd-not. Check out the link below:
odd-not.com
If you buy something tell him Robert and Harry the Beaver sent you over!
We hope you enjoy this woodworking video.
Got a woodturning question? Post it in the comments and possibly get featured in a future woodturning video!
Interested in pieces I turn? Check out my website!
hodgepodgeww.com
Feel like buying a beaver some wood?
buymeacoffee.com/hodgepodgeww
Ack’s Abrasive and Polishing Paste. If you would like to try some save 10% off your order by use the coupon code "hodge10" at checkout!!
ackswoodpaste.com/shop
Get the Freshest CA glues in the market at Starbond starbond.com/?rfsn=4573600.b97f0a
Use Code HodgePodge at checkout to save 15% amount on your purchase
Checkout my Etsy Store:
etsy.com/shop/HodgePodgeWoodWorks
HodgePodge WoodWorks Merch here:
teespring.com/stores/hodgepodge-woodworks
Inclined to help the project fund:
paypal.com/paypalme/HodgePodgeWoodWorks
Follow me on Instagram and Facebook:
instagram.com/hodgepodgeww
facebook.com/HodgePodgeww
Products I use:
POWER TOOLS:
Powermatic 3520 Lathe (newer model) - amzn.to/3hUz3h1
Foredom Woodcarving Kit - amzn.to/3i16cY3
CHUCKS/MOUNTING:
Nova Titan III Chuck - amzn.to/3u1ho9v
Nova Supernova 2 Chuck - amzn.to/33YCU4m
Oneway Live Center - amzn.to/3wsydMt
MISC:
Oneway Wolverine Jig - amzn.to/3hUZRh9
6in Stainless Steel Ruler - amzn.to/33Z7ElP
WEN 400CFM Air Filtration System - amzn.to/3yoxc9Q
8in Compass - amzn.to/3bHTpWu
Lincoln Omnishield Face Shield - amzn.to/3hDJqpf
3M Half Respirator - amzn.to/3wq1fMn
General Tools Moisture Meter - amzn.to/341R1pv
Plastic Center Finder - amzn.to/3u6JlNd
Deluxe Rotary Inertia Sander - amzn.to/2RtbXmO
Robust 9” Small J Curved Tool Rest - amzn.to/3u6GT9J
FILMING:
Sony a6000 Mirrorless Camera - amzn.to/3f71QNk
Ranger 56” Travel Camera Tripod - amzn.to/2SaDhpJ
FIFINE USB Microphone - amzn.to/3f7lpVC
Neewer Photo Light Box - amzn.to/3v5G8Pi
*Some of these links may be affiliate or sponsor links. Any potential purchasing or even clicking on these links will help support Harry and I and help us make even better content.
Thank you very much for all of your support!
#woodturning #budvase #weedpot #woodworking #woodporn #projectsthatsell #giftideas #woodlathe #lathe #woodworking #art #vacuumchuck #weedpot #twigpot
In this week’s wood turning video, I will put a unique twist to a wood turned weed or twig pot.
These are taken from a flat plank of Mahogany and turned round in side grain orientation, I then used a vacuum chuck to secure the piece to the lathe so I could make a disk.
A portion of this disk was cut at the miter saw and then a hole was drilled for the dried flowers.
I’ve got all kinds of ideas to try with the vacuum chuck but as you guys hear it is a bit loud so you might have to deal with more of Harry’s singing.
The vacuum chuck which I’m using comes from Douglas Long at Odd-not. Check out the link below:
odd-not.com
If you buy something tell him Robert and Harry the Beaver sent you over!
We hope you enjoy this woodworking video.
Got a woodturning question? Post it in the comments and possibly get featured in a future woodturning video!
Interested in pieces I turn? Check out my website!
hodgepodgeww.com
Feel like buying a beaver some wood?
buymeacoffee.com/hodgepodgeww
Ack’s Abrasive and Polishing Paste. If you would like to try some save 10% off your order by use the coupon code "hodge10" at checkout!!
ackswoodpaste.com/shop
Get the Freshest CA glues in the market at Starbond starbond.com/?rfsn=4573600.b97f0a
Use Code HodgePodge at checkout to save 15% amount on your purchase
Checkout my Etsy Store:
etsy.com/shop/HodgePodgeWoodWorks
HodgePodge WoodWorks Merch here:
teespring.com/stores/hodgepodge-woodworks
Inclined to help the project fund:
paypal.com/paypalme/HodgePodgeWoodWorks
Follow me on Instagram and Facebook:
instagram.com/hodgepodgeww
facebook.com/HodgePodgeww
Products I use:
POWER TOOLS:
Powermatic 3520 Lathe (newer model) - amzn.to/3hUz3h1
Foredom Woodcarving Kit - amzn.to/3i16cY3
CHUCKS/MOUNTING:
Nova Titan III Chuck - amzn.to/3u1ho9v
Nova Supernova 2 Chuck - amzn.to/33YCU4m
Oneway Live Center - amzn.to/3wsydMt
MISC:
Oneway Wolverine Jig - amzn.to/3hUZRh9
6in Stainless Steel Ruler - amzn.to/33Z7ElP
WEN 400CFM Air Filtration System - amzn.to/3yoxc9Q
8in Compass - amzn.to/3bHTpWu
Lincoln Omnishield Face Shield - amzn.to/3hDJqpf
3M Half Respirator - amzn.to/3wq1fMn
General Tools Moisture Meter - amzn.to/341R1pv
Plastic Center Finder - amzn.to/3u6JlNd
Deluxe Rotary Inertia Sander - amzn.to/2RtbXmO
Robust 9” Small J Curved Tool Rest - amzn.to/3u6GT9J
FILMING:
Sony a6000 Mirrorless Camera - amzn.to/3f71QNk
Ranger 56” Travel Camera Tripod - amzn.to/2SaDhpJ
FIFINE USB Microphone - amzn.to/3f7lpVC
Neewer Photo Light Box - amzn.to/3v5G8Pi
*Some of these links may be affiliate or sponsor links. Any potential purchasing or even clicking on these links will help support Harry and I and help us make even better content.
Thank you very much for all of your support!
#woodturning #budvase #weedpot #woodworking #woodporn #projectsthatsell #giftideas #woodlathe #lathe #woodworking #art #vacuumchuck #weedpot #twigpot










