Uploaded May 2019 | Updated November 2026, 3 days ago
Do you ever have a picture in your mind that you try and create? That's what today's project is all about. I had this picture of a lidded box with a Chinese inspiration. In Chinese architecture, the buildings have a sloping rooftop with layers and the top comes to a point. That is what I envisioned for this project. I had a lot of fun turning this one. If I were to do it again, I would have used a taller piece of wood where I would have enough material to have a larger oval base. The top would also be taller so I could capture the up-sloping top. The spalting and voids really help make this an interesting piece to look at.
Please subscribe to my channel: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Things I used in this project:
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
5/8 Bowl Gouge: amzn.to/2XV8jQc
1" Standard Skew Chisel: bit.ly/2Eh7EkO
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1/8" HSS Parting Tool: bit.ly/2GAEBey
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com
Mylands Friction Polish: bit.ly/2CHcVkG
Do you ever have a picture in your mind that you try and create? That's what today's project is all about. I had this picture of a lidded box with a Chinese inspiration. In Chinese architecture, the buildings have a sloping rooftop with layers and the top comes to a point. That is what I envisioned for this project. I had a lot of fun turning this one. If I were to do it again, I would have used a taller piece of wood where I would have enough material to have a larger oval base. The top would also be taller so I could capture the up-sloping top. The spalting and voids really help make this an interesting piece to look at.
Please subscribe to my channel: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Things I used in this project:
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
5/8 Bowl Gouge: amzn.to/2XV8jQc
1" Standard Skew Chisel: bit.ly/2Eh7EkO
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1/8" HSS Parting Tool: bit.ly/2GAEBey
Mylands Cellulose Sanding Sealer: amzn.to/2V6bC5k
Acks Abrasive Sanding Paste & Polish: ackswoodpaste.com
Mylands Friction Polish: bit.ly/2CHcVkG










