Uploaded March 2020 | Updated November 2026, 13 hours ago
Today's project is a special project for my mom. At Christmas, I tried making her a similar type of bear cast in resin, but I put too much resin in and it overheated and cracked the resin. This time I didn't want to take any chances so I used multiple small pours to reduce the heat buildup. This was a fun little project that had it's own challenges, but turned out amazing!
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Daniel 9:9 (NIV)
The Lord our God is merciful and forgiving, even though we have rebelled against him;
Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order
Starbond
starbond.com/?rfsn=3571889.0c6a137
Use WOLF10 at checkout to get 10% off your order
Materials used (affiliate):
Alumilite Clear Slow Set: bit.ly/39QuixQ
Bear Figure: amzn.to/2JiVolD
Tools used (affiliate):
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Shop Fox 12" Disc Sander: amzn.to/2JkGV8J
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
Easy Wood Tools Ci3 Round Negative Rake Carbide Cutter: amzn.to/31uvjaa
1" Standard Skew Chisel: amzn.to/2XoYbz0
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1/8" HSS Parting Tool: bit.ly/2GAEBey
60 Degree Live Center: amzn.to/2DRGRLd
SUBSCRIBE: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142
Today's project is a special project for my mom. At Christmas, I tried making her a similar type of bear cast in resin, but I put too much resin in and it overheated and cracked the resin. This time I didn't want to take any chances so I used multiple small pours to reduce the heat buildup. This was a fun little project that had it's own challenges, but turned out amazing!
I hope you enjoy this video. Please let me know if there is a project you'd like to see me make and I will do my best to do it. Thank you for all the support you have shown me and the channel!
Daniel 9:9 (NIV)
The Lord our God is merciful and forgiving, even though we have rebelled against him;
Ack's Abrasive & Polishing Paste
ackswoodpaste.com
Use WOLF10 at checkout to get 10% off your order
Starbond
starbond.com/?rfsn=3571889.0c6a137
Use WOLF10 at checkout to get 10% off your order
Materials used (affiliate):
Alumilite Clear Slow Set: bit.ly/39QuixQ
Bear Figure: amzn.to/2JiVolD
Tools used (affiliate):
Jet 1221VS Lathe: amzn.to/2OdLhCB
Nova 48202 G3 Wood Turning Chuck: amzn.to/2yGRoGC
Shop Fox 12" Disc Sander: amzn.to/2JkGV8J
Easy Wood Tools Carbide Tools:amzn.to/2N0FTy5
Easy Wood Tools Ci3 Round Negative Rake Carbide Cutter: amzn.to/31uvjaa
1" Standard Skew Chisel: amzn.to/2XoYbz0
3/4" Round Nose Negative Rake Scraper: bit.ly/2TLxthu
1/8" HSS Parting Tool: bit.ly/2GAEBey
60 Degree Live Center: amzn.to/2DRGRLd
SUBSCRIBE: youtube.com/wolfridgewoodworking
Please leave a comment if there are any questions you have.
You can also find me here:
website: wolfridgewoodworking.com
Facebook: facebook.com/wolfridgewoodworking
Instagram: instagram.com/wolfridgewoodworking
Email: edlparker3@gmail.com
Ed Parker
P.O Box 1893
Queen Creek, AZ 85142










