Uploaded October 2013 | Updated November 2026, 2 hours ago
On today's show, we're talking about essential hand tools for power tool woodworkers, router speeds, keeping a sharp edge on your tools, and using bandsaw blades for hand saws.
What's on the bench?
Marc - More humidor stuff, $250 worth of veneer
Matt - resaw fiasco
Shannon - finished up the treadle lathe, time to play
What's New?
- Traditional Swedish Woodworking: thekidshouldseethis.com/post/62813896302
- Archie sent a link to another woodworker who can make you green w/envy robertvanembricqs.com
- Ryan - here is a pretty cool video of a guy making a rocking chair with no power tools.
youtu.be/eGe2iGmsDKs
Poll of the Week
- Do you turn?
Kickback
Kenji- I'm using DMT diamond plates and a little tip I learned is that there is a break-in period for these particular stones. When they are brand new they are a lot coarser than they're supposed to be. And your first initial use on them will not yield the near 0 radius edge you're looking for. But after you've used the stones for a little while they will break in and you'll knock off all the bigger grits on the stone which prevent the mirror finish you're trying to achieve.
Dave - I know it's been mentioned on the show before, but this is a really quick reply about the conundrum of the listener about which tool to purchase for trimming tenon cheeks. Shannon was talking about using a router plane and capacity issues on longer tenons, which is true. So why not make your own router plane with one side longer than the other, and keep it just for the purpose of trimming tenons?
Video of Poor Man's Router (how to make one):
youtube.com/watch?v=B_2a_FwjAgk
Top 3 Hand Tools for Power Tool Woodworkers Discussion
Email
James -
I have a variable speed Bosch router than can run between 8,000-25,000rpm. I'm looking for some type of guideline to follow when working with different thicknesses and densities and bit diameters. So far, this router is outstanding (as all Bosch tools are!!!) and I usually run it around 12,000rpm for most projects. I'm planning on punching dog holes in my 6/4 maple workbench top and really don't want burn up the motor, the bit, or least of all the workbench top. When do I increase/decrease
speeds?
Christopher -
I am having trouble keeping a working edge on my plane irons.
I am using a king 4000 grit waterstone as my final step in sharpening and I get a very nice edge on them but it never seems to last for more than a few days of infrequent use. Do you have any ideas?
Hutch -
What is your take on using band saw blades, cut to length, for use in turning, bow, and frame saws?
On today's show, we're talking about essential hand tools for power tool woodworkers, router speeds, keeping a sharp edge on your tools, and using bandsaw blades for hand saws.
What's on the bench?
Marc - More humidor stuff, $250 worth of veneer
Matt - resaw fiasco
Shannon - finished up the treadle lathe, time to play
What's New?
- Traditional Swedish Woodworking: thekidshouldseethis.com/post/62813896302
- Archie sent a link to another woodworker who can make you green w/envy robertvanembricqs.com
- Ryan - here is a pretty cool video of a guy making a rocking chair with no power tools.
youtu.be/eGe2iGmsDKs
Poll of the Week
- Do you turn?
Kickback
Kenji- I'm using DMT diamond plates and a little tip I learned is that there is a break-in period for these particular stones. When they are brand new they are a lot coarser than they're supposed to be. And your first initial use on them will not yield the near 0 radius edge you're looking for. But after you've used the stones for a little while they will break in and you'll knock off all the bigger grits on the stone which prevent the mirror finish you're trying to achieve.
Dave - I know it's been mentioned on the show before, but this is a really quick reply about the conundrum of the listener about which tool to purchase for trimming tenon cheeks. Shannon was talking about using a router plane and capacity issues on longer tenons, which is true. So why not make your own router plane with one side longer than the other, and keep it just for the purpose of trimming tenons?
Video of Poor Man's Router (how to make one):
youtube.com/watch?v=B_2a_FwjAgk
Top 3 Hand Tools for Power Tool Woodworkers Discussion
James -
I have a variable speed Bosch router than can run between 8,000-25,000rpm. I'm looking for some type of guideline to follow when working with different thicknesses and densities and bit diameters. So far, this router is outstanding (as all Bosch tools are!!!) and I usually run it around 12,000rpm for most projects. I'm planning on punching dog holes in my 6/4 maple workbench top and really don't want burn up the motor, the bit, or least of all the workbench top. When do I increase/decrease
speeds?
Christopher -
I am having trouble keeping a working edge on my plane irons.
I am using a king 4000 grit waterstone as my final step in sharpening and I get a very nice edge on them but it never seems to last for more than a few days of infrequent use. Do you have any ideas?
Hutch -
What is your take on using band saw blades, cut to length, for use in turning, bow, and frame saws?










