Uploaded September 2026 | Updated November 2026, 3 hours ago
In this video, we replace an old 2-gang dimmer switch with a new LED-compatible dimmer and take a detailed look at how the lighting circuit has been wired.
With the full safe isolation procedure already completed, we start by identifying the conductors behind the existing dimmer. This installation uses the method where the permanent line and neutral are taken directly to the switch position, rather than the more traditional arrangement where the feed is taken to the light fitting.
We identify the permanent line, neutrals, CPCs and the two switched line conductors supplying the lights in the dining and living areas before carefully removing the existing dimmer.
Before reconnecting the new dimmer, we also look at why it's sometimes good practice to remake conductor ends that have previously been terminated, particularly where the copper has become damaged or fragmented.
The new 2-gang dimmer has COM, L1 and L2 terminals. The permanent line is connected into COM, a bridging link supplies the second dimmer, and the two switched lines are connected into L1.
We also discuss an important consideration that's easily overlooked when changing a standard light switch for a dimmer — the depth of the back box. Many dimmers require considerably more space than a standard switch and may not fit into a shallow 16 mm box.
In this video:
⚡ Identifying a lighting circuit at the switch
⚡ Permanent line, neutral and CPC connections
⚡ Identifying switched line conductors
⚡ Understanding COM, L1 and L2
⚡ Wiring a 2-gang dimmer switch
⚡ Using a bridging link between dimmers
⚡ Remaking damaged conductor ends
⚡ Changing from an older dimmer to an LED-compatible dimmer
⚡ Why LED lamps can flicker with unsuitable dimmers
⚡ Checking back-box depth before fitting a dimmer
⚡ Tips for neat and secure terminations
🔔 Subscribe for more free electrical training videos youtube.com/c/GSHElectrical?sub_confirmation=1
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 – Identifying the Existing Dimmer Wiring
00:28 – Permanent Line, Neutrals & CPCs
00:55 – Removing the Old Dimmer Switch
01:25 – Identifying the Switched Lines
01:52 – COM, L1 & L2 Explained
02:15 – Preparing the Conductors
02:44 – Connecting the Permanent Line & Link
03:14 – Connecting the Switched Lines to L1
03:44 – LED Dimmer & Flickering Issues
04:05 – Checking the Back Box Depth
04:37 – Final Thoughts
A useful practical guide for electrical apprentices, learners and electricians looking to better understand lighting circuit wiring and LED dimmer installation.
⚠️ Electrical work should only be undertaken by persons with the appropriate knowledge, skills and experience. Always safely isolate the circuit and prove dead before beginning work.
📺 Safe Isolation youtu.be/yZzKNsspmTU
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical”.
▶️ FACEBOOK facebook.com/gshelectrical
▶️ INSTAGRAM instagram.com/p/BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0
▶️ TWITTER mobile.twitter.com/gsh_electrical
▶️ TikTok vm.tiktok.com/ZMRBLFdhe
#ElectricalTraining #DimmerSwitch #LEDLighting #LightingCircuits #ElectricalWiring #Electrician #ElectricalApprentice #SafeIsolation #GSHElectrical
In this video, we replace an old 2-gang dimmer switch with a new LED-compatible dimmer and take a detailed look at how the lighting circuit has been wired.
With the full safe isolation procedure already completed, we start by identifying the conductors behind the existing dimmer. This installation uses the method where the permanent line and neutral are taken directly to the switch position, rather than the more traditional arrangement where the feed is taken to the light fitting.
We identify the permanent line, neutrals, CPCs and the two switched line conductors supplying the lights in the dining and living areas before carefully removing the existing dimmer.
Before reconnecting the new dimmer, we also look at why it's sometimes good practice to remake conductor ends that have previously been terminated, particularly where the copper has become damaged or fragmented.
The new 2-gang dimmer has COM, L1 and L2 terminals. The permanent line is connected into COM, a bridging link supplies the second dimmer, and the two switched lines are connected into L1.
We also discuss an important consideration that's easily overlooked when changing a standard light switch for a dimmer — the depth of the back box. Many dimmers require considerably more space than a standard switch and may not fit into a shallow 16 mm box.
In this video:
⚡ Identifying a lighting circuit at the switch
⚡ Permanent line, neutral and CPC connections
⚡ Identifying switched line conductors
⚡ Understanding COM, L1 and L2
⚡ Wiring a 2-gang dimmer switch
⚡ Using a bridging link between dimmers
⚡ Remaking damaged conductor ends
⚡ Changing from an older dimmer to an LED-compatible dimmer
⚡ Why LED lamps can flicker with unsuitable dimmers
⚡ Checking back-box depth before fitting a dimmer
⚡ Tips for neat and secure terminations
🔔 Subscribe for more free electrical training videos youtube.com/c/GSHElectrical?sub_confirmation=1
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:00 – Identifying the Existing Dimmer Wiring
00:28 – Permanent Line, Neutrals & CPCs
00:55 – Removing the Old Dimmer Switch
01:25 – Identifying the Switched Lines
01:52 – COM, L1 & L2 Explained
02:15 – Preparing the Conductors
02:44 – Connecting the Permanent Line & Link
03:14 – Connecting the Switched Lines to L1
03:44 – LED Dimmer & Flickering Issues
04:05 – Checking the Back Box Depth
04:37 – Final Thoughts
A useful practical guide for electrical apprentices, learners and electricians looking to better understand lighting circuit wiring and LED dimmer installation.
⚠️ Electrical work should only be undertaken by persons with the appropriate knowledge, skills and experience. Always safely isolate the circuit and prove dead before beginning work.
📺 Safe Isolation youtu.be/yZzKNsspmTU
Videos are training aids for City and Guilds (C and G) and EAL courses Level 1, 2, 3 plus AM2, AM2S and AM2E.
You can follow me day by day on Facebook, Instagram, Twitter and TikTok lookout for "GSH Electrical”.
▶️ FACEBOOK facebook.com/gshelectrical
▶️ INSTAGRAM instagram.com/p/BrIhZmrAYGDTmjMdb9lUNQodMevqsbDDki3qpQ0
▶️ TWITTER mobile.twitter.com/gsh_electrical
▶️ TikTok vm.tiktok.com/ZMRBLFdhe
#ElectricalTraining #DimmerSwitch #LEDLighting #LightingCircuits #ElectricalWiring #Electrician #ElectricalApprentice #SafeIsolation #GSHElectrical










