Uploaded May 2015 | Updated September 2026, 3 days ago
In this tutorial we look at how to manually install and remove drivers
using pnputil.exe and Device Manager. Often installing or unistalling a
driver is not as simple as just clicking on the unistall button for the
software. Sometimes we need to manually install or remove the driver. In
this video we show how to use device manager to add or remove a driver
and we also show how to troubleshoot driver problems.
We also show how to use the pnputil command in Powershell (it is the
same in the cmd prompt too).to add and remove drivers too.
For more visit http://www.windows10.ninja and 2012r2.com
Transcript (machine generated so it contains errors)
Hello today will have a quick look at how to install drivers and remove
them also." Look at troubleshooting them, and there are two ways were
can I be doing it. One is using device manager and the other is using
PowerShell or the command prompt. Okay so we have on our C drive okay in
these folders scanner driver and a printer driver works well and a
printer driver. There we get back a lesson that basically if an INF file
okay and to see that we need to file extensions and we sure that the
sperm will be you there we get our brilliant okay and you have another
INF, another folder case. Let's start with PowerShell open PowerShell
make sure we run as administrator okay, type SK accept the case cd\now
and C drive. They are, we need to go to the printer driver's LCD printer
driver on CD, when X 64 okay. Now it's quite simple. Okay, basically
before we have device plugged in and on the computer. We just site PNP
UTI now Can and then/installed. We won a solid as well, and then we have
the add switch and because only one I had a file in this, we can
actually use wildcard start the INF otherwise would have to give the
full name and then.INF okay. Click enter again the process of can and
will install it beautiful, very is the from the war trusted you. We can
say yes or no. In this case, I'll go along with that happily done, type
brilliant, brilliant, brilliant. Now all we would need to just plug a
device in turn on and it should run okay if we want to remove it
basically is almost the same Pnputil the only thing is, D delete and
would force it if the device is currently running and we must give it
name. Okay, it's OEM, ODM 3.INF what windows does is for each new device
driver added it creates a new so all you 345 except make sure we delete
that one and the trust that once you get sometimes in the command prompt
decaying a little confusing, perfectly done, but then driver package
deleted and uninstalled happy happy happy okay the next way you look at
is and adding it manually, using device manager okay action we can scan
for hardware changes or let's do it this way and okay. Hardware that I
have there we go work in Abbey installing a printer at this time. So
basically, let's find printer. Click next KLS find and now have disk
basically where we have it saved, which is basically on the C drive in a
printer driver folder and open select the INF file. Click okay. It says
that it sends images okay. Click next, click next and then once again
with the click that same install and will take for sale to install the
driver. This way, then what is finished, basically anyone planning a
device can delegate network and share a printer is a little it's
obviously very low click finish. Perfect match a now all we need to do
is yours it's coming over there when we restart our return on our
printer, it will come up is another one over here okay now will have a
quick look at just some quick troubleshooting basically in our device
manager. We can have a look at all devices example that one as an issue
you a get the new device driver for it or you might want to uninstall
the driver or remove the device, et cetera Okay we view it we can view
things by connection show hidden devices. Okay, we can also have a look
at. For example, recognise their uninstalling it look at the properties
section okay, we can look at events any events that have happened
deliver the resources okay. We can go into details and an RFID's and
lots and lots of ideas. Basically what will be looking for is generally
to find out if there are any conflicts. Any errors what are the error
messages and then try and resolve them. Okay, our data watching
In this tutorial we look at how to manually install and remove drivers
using pnputil.exe and Device Manager. Often installing or unistalling a
driver is not as simple as just clicking on the unistall button for the
software. Sometimes we need to manually install or remove the driver. In
this video we show how to use device manager to add or remove a driver
and we also show how to troubleshoot driver problems.
We also show how to use the pnputil command in Powershell (it is the
same in the cmd prompt too).to add and remove drivers too.
For more visit http://www.windows10.ninja and 2012r2.com
Transcript (machine generated so it contains errors)
Hello today will have a quick look at how to install drivers and remove
them also." Look at troubleshooting them, and there are two ways were
can I be doing it. One is using device manager and the other is using
PowerShell or the command prompt. Okay so we have on our C drive okay in
these folders scanner driver and a printer driver works well and a
printer driver. There we get back a lesson that basically if an INF file
okay and to see that we need to file extensions and we sure that the
sperm will be you there we get our brilliant okay and you have another
INF, another folder case. Let's start with PowerShell open PowerShell
make sure we run as administrator okay, type SK accept the case cd\now
and C drive. They are, we need to go to the printer driver's LCD printer
driver on CD, when X 64 okay. Now it's quite simple. Okay, basically
before we have device plugged in and on the computer. We just site PNP
UTI now Can and then/installed. We won a solid as well, and then we have
the add switch and because only one I had a file in this, we can
actually use wildcard start the INF otherwise would have to give the
full name and then.INF okay. Click enter again the process of can and
will install it beautiful, very is the from the war trusted you. We can
say yes or no. In this case, I'll go along with that happily done, type
brilliant, brilliant, brilliant. Now all we would need to just plug a
device in turn on and it should run okay if we want to remove it
basically is almost the same Pnputil the only thing is, D delete and
would force it if the device is currently running and we must give it
name. Okay, it's OEM, ODM 3.INF what windows does is for each new device
driver added it creates a new so all you 345 except make sure we delete
that one and the trust that once you get sometimes in the command prompt
decaying a little confusing, perfectly done, but then driver package
deleted and uninstalled happy happy happy okay the next way you look at
is and adding it manually, using device manager okay action we can scan
for hardware changes or let's do it this way and okay. Hardware that I
have there we go work in Abbey installing a printer at this time. So
basically, let's find printer. Click next KLS find and now have disk
basically where we have it saved, which is basically on the C drive in a
printer driver folder and open select the INF file. Click okay. It says
that it sends images okay. Click next, click next and then once again
with the click that same install and will take for sale to install the
driver. This way, then what is finished, basically anyone planning a
device can delegate network and share a printer is a little it's
obviously very low click finish. Perfect match a now all we need to do
is yours it's coming over there when we restart our return on our
printer, it will come up is another one over here okay now will have a
quick look at just some quick troubleshooting basically in our device
manager. We can have a look at all devices example that one as an issue
you a get the new device driver for it or you might want to uninstall
the driver or remove the device, et cetera Okay we view it we can view
things by connection show hidden devices. Okay, we can also have a look
at. For example, recognise their uninstalling it look at the properties
section okay, we can look at events any events that have happened
deliver the resources okay. We can go into details and an RFID's and
lots and lots of ideas. Basically what will be looking for is generally
to find out if there are any conflicts. Any errors what are the error
messages and then try and resolve them. Okay, our data watching
