Uploaded April 2022 | Updated September 2026, 1 week ago
Here I build up the parts for Bag A.
I did things a bit different than the manual states but it's not much different at all.
The lightly sanding & gluing of the FRP parts, was/is used by racers for many years, I do this on almost all my CF or FRP stuff. At the very least, it will help prevent getting a sliver or cut.
The spacers for the dampers upper mount I picked up from Mark Bryan (Mark Bryan RC).
As for the front damper springs & perches, G11* was used over the MA25 with the absent of the G2 parts. I seen this in a FB group.
Another tips for the front dampers & other tips, can be seen on Addam's channel (Addam's Playground) & on Marks channel (Mark Bryan RC) for their take on this.
I made a few spoken mistakes, calling things the wrong name, be easy on me.
Oops, I wasn't done, Stay to the end, I put on the roll cage!!!
A Very Big THANK YOU to the RC Elf, without your kindness, this video would not be here, Thank You ever so much!!!!
Here I build up the parts for Bag A.
I did things a bit different than the manual states but it's not much different at all.
The lightly sanding & gluing of the FRP parts, was/is used by racers for many years, I do this on almost all my CF or FRP stuff. At the very least, it will help prevent getting a sliver or cut.
The spacers for the dampers upper mount I picked up from Mark Bryan (Mark Bryan RC).
As for the front damper springs & perches, G11* was used over the MA25 with the absent of the G2 parts. I seen this in a FB group.
Another tips for the front dampers & other tips, can be seen on Addam's channel (Addam's Playground) & on Marks channel (Mark Bryan RC) for their take on this.
I made a few spoken mistakes, calling things the wrong name, be easy on me.
Oops, I wasn't done, Stay to the end, I put on the roll cage!!!
A Very Big THANK YOU to the RC Elf, without your kindness, this video would not be here, Thank You ever so much!!!!
