Uploaded October 2025 | Updated November 2026, 5 minutes ago
Rolled hems don’t have to be frustrating 😅 With the right setup, they’re one of the easiest ways to get a polished, professional edge.
1️⃣ Thread choice matters – Use regular serger thread in the needle + lower looper, and a fuller thread (like wooly poly) in the upper looper for a beautiful, filled edge.
2️⃣ Needle position – Switch to the right needle only. This narrows the stitch width and creates that delicate rolled look.
3️⃣ Tensions – Typically: right needle around 3–4, upper looper 3–5, and lower looper high (7+). Always test on scraps because every fabric behaves differently.
4️⃣ Stitch length – Shorten to around 1–1.5. This packs the thread in tightly and gives that lovely satin-like edge.
5️⃣ Cut width – Narrow it down to 5 (or less if your machine allows). Too wide and it won’t roll neatly, too narrow and it may curl or fray.
✨ Remember: practice on scraps of your actual project fabric—rolled hems look different on sheers, cottons, and knits!
Here’s the exact setup I used to achieve my perfect rolled hem:
•Right needle tension → 3.5
•Upper looper tension → 4 (with Fluffy Bee / Wonderfil SoftLoc™)
•Lower looper tension → 7.5 (with regular serger thread)
•Stitch length → 1.5
•Differential feed → 1 (neutral)
•Width → 5
Rolled hems don’t have to be frustrating 😅 With the right setup, they’re one of the easiest ways to get a polished, professional edge.
1️⃣ Thread choice matters – Use regular serger thread in the needle + lower looper, and a fuller thread (like wooly poly) in the upper looper for a beautiful, filled edge.
2️⃣ Needle position – Switch to the right needle only. This narrows the stitch width and creates that delicate rolled look.
3️⃣ Tensions – Typically: right needle around 3–4, upper looper 3–5, and lower looper high (7+). Always test on scraps because every fabric behaves differently.
4️⃣ Stitch length – Shorten to around 1–1.5. This packs the thread in tightly and gives that lovely satin-like edge.
5️⃣ Cut width – Narrow it down to 5 (or less if your machine allows). Too wide and it won’t roll neatly, too narrow and it may curl or fray.
✨ Remember: practice on scraps of your actual project fabric—rolled hems look different on sheers, cottons, and knits!
Here’s the exact setup I used to achieve my perfect rolled hem:
•Right needle tension → 3.5
•Upper looper tension → 4 (with Fluffy Bee / Wonderfil SoftLoc™)
•Lower looper tension → 7.5 (with regular serger thread)
•Stitch length → 1.5
•Differential feed → 1 (neutral)
•Width → 5










