Uploaded November 2026 | Updated November 2026, 4 days ago
Tesla's Giga Press needs about 6,000 tonnes of clamping force (around 13.2 million pounds of force) to hold a steel mold shut. Each shot injects about 80 kg (180 lb) of liquid aluminum at roughly 10 m/s (22 mph), and Tesla says the metal has to fill the die in about one tenth of a blink, before it solidifies. The squeeze continues after the mold fills, because metal loses about 4 to 7% of its volume as it turns solid. That liquid pushes the mold halves apart: opening force = projected area × metal pressure. One square meter (10.8 sq ft) at a typical 600 bar (about 8,700 psi) works out to roughly 6,100 tonnes, or 13.5 million pounds of force. Double the area and you double the force, so a bigger part in one shot needs a bigger clamp. One Model Y rear casting replaced 70 parts, and Musk said it removed the need for around 300 robots. The machine itself weighs about 410 tonnes (900,000 lb).
Sources:
en.wikipedia.org/wiki/Giga_Press
insideevs.com/news/618200/berlin-made-tesla-model-y-get-mega-casts-structural-battery-packs
electrek.co/2021/02/04/tesla-video-giga-press-in-action-producing-giant-single-piece-rear-body
molds-dies.com/blog/article/39
upmold.com/wp-content/uploads/Data-center/Die-Casting-technology.pdf
en.42how.com/2021/12/13/your-model-y-is-being-pressed-out-tech-flow
#Tesla #GigaPress #ModelY #manufacturing #engineering #diecasting #shorts #Shorts
Tesla's Giga Press needs about 6,000 tonnes of clamping force (around 13.2 million pounds of force) to hold a steel mold shut. Each shot injects about 80 kg (180 lb) of liquid aluminum at roughly 10 m/s (22 mph), and Tesla says the metal has to fill the die in about one tenth of a blink, before it solidifies. The squeeze continues after the mold fills, because metal loses about 4 to 7% of its volume as it turns solid. That liquid pushes the mold halves apart: opening force = projected area × metal pressure. One square meter (10.8 sq ft) at a typical 600 bar (about 8,700 psi) works out to roughly 6,100 tonnes, or 13.5 million pounds of force. Double the area and you double the force, so a bigger part in one shot needs a bigger clamp. One Model Y rear casting replaced 70 parts, and Musk said it removed the need for around 300 robots. The machine itself weighs about 410 tonnes (900,000 lb).
Sources:
en.wikipedia.org/wiki/Giga_Press
insideevs.com/news/618200/berlin-made-tesla-model-y-get-mega-casts-structural-battery-packs
electrek.co/2021/02/04/tesla-video-giga-press-in-action-producing-giant-single-piece-rear-body
molds-dies.com/blog/article/39
upmold.com/wp-content/uploads/Data-center/Die-Casting-technology.pdf
en.42how.com/2021/12/13/your-model-y-is-being-pressed-out-tech-flow
#Tesla #GigaPress #ModelY #manufacturing #engineering #diecasting #shorts #Shorts










