Uploaded November 2026 | Updated November 2026, 4 days ago
About half a mile of wire, roughly zero point eight kilometers, is gone from Boston Dynamics' new Stretch warehouse robot.
That's about eighty-one percent of its internal cabling. And the reason is what happened when these robots went to work.
You might expect each new robot to have more sensors, with more wires connecting everything. Stretch spends its working life unloading boxes from trailers. The team had data from more than a hundred thousand operating hours and tens of millions of boxes unloaded.
Wiring wear was the biggest source of intermittent electrical faults. Intermittent means the problem comes and goes. A robot can have the ability to unload a trailer and still be out of service because of an electrical fault.
Adding another capability leaves that problem sitting inside the machine. So Stretch Gen Two eliminates dynamic cables and complex harnesses. The connectors are heavy-duty automotive-grade parts.
Then they changed how you repair it. The new robot has modular parts you can unplug and replace. A full swerve-drive swap used to take about an entire day. Now it takes about an hour.
Onboard diagnostics help the customer's maintenance team work on the robot. So the redesign covers both the parts that caused trouble and the job of getting a broken robot running again.
The gripper also gets more precise sensing. And Stretch can unload up to a thousand cases per hour, depending on case weight and stacking, using multipick.
The design goal is to keep it unloading and make it easier to fix when something breaks. Once the wiring is what's taking robots offline, how much of it can you get rid of?
Sources:
engineering.com/boston-dynamics-unveils-upgraded-stretch-gen-2-robot
interestingengineering.com/ai-robotics/boston-dynamics-stretch-gen-2-robot
linkedin.com/posts/boston-dynamics_were-thrilled-to-announce-stretch-gen-2-activity-7523429571258400768-xasm
#Robotics #BostonDynamics #Stretch #Warehouse #shorts #Shorts
About half a mile of wire, roughly zero point eight kilometers, is gone from Boston Dynamics' new Stretch warehouse robot.
That's about eighty-one percent of its internal cabling. And the reason is what happened when these robots went to work.
You might expect each new robot to have more sensors, with more wires connecting everything. Stretch spends its working life unloading boxes from trailers. The team had data from more than a hundred thousand operating hours and tens of millions of boxes unloaded.
Wiring wear was the biggest source of intermittent electrical faults. Intermittent means the problem comes and goes. A robot can have the ability to unload a trailer and still be out of service because of an electrical fault.
Adding another capability leaves that problem sitting inside the machine. So Stretch Gen Two eliminates dynamic cables and complex harnesses. The connectors are heavy-duty automotive-grade parts.
Then they changed how you repair it. The new robot has modular parts you can unplug and replace. A full swerve-drive swap used to take about an entire day. Now it takes about an hour.
Onboard diagnostics help the customer's maintenance team work on the robot. So the redesign covers both the parts that caused trouble and the job of getting a broken robot running again.
The gripper also gets more precise sensing. And Stretch can unload up to a thousand cases per hour, depending on case weight and stacking, using multipick.
The design goal is to keep it unloading and make it easier to fix when something breaks. Once the wiring is what's taking robots offline, how much of it can you get rid of?
Sources:
engineering.com/boston-dynamics-unveils-upgraded-stretch-gen-2-robot
interestingengineering.com/ai-robotics/boston-dynamics-stretch-gen-2-robot
linkedin.com/posts/boston-dynamics_were-thrilled-to-announce-stretch-gen-2-activity-7523429571258400768-xasm
#Robotics #BostonDynamics #Stretch #Warehouse #shorts #Shorts










