Uploaded November 2026 | Updated November 2026, 4 days ago
Apple's A twenty Pro wires memory ninety-six bits wide by moving that memory off the top of the chip.
That sounds like a strange use of space inside a phone. Stack the memory on top of the processor and you can fit them over the same patch of circuit board. That's the idea behind package-on-package.
But now you've put something directly above the processor, where you also want heat to get out.
TechInsights' preliminary teardown of the iPhone eighteen Pro found that Apple changed this arrangement for the A twenty Pro. The processor and memory sit beside each other inside a wafer-level multi-chip module.
Picture taking the top package off that stack and setting it down alongside the processor. The processor now has space above it, and that arrangement may help heat move away from it.
There's also the connection to memory. Graphics and on-device AI need data from that memory to do their work. A wider connection can carry more data at once.
The preliminary analysis points to a ninety-six-bit LPDDR5X interface. That's the width of the data connection. More room to feed the graphics and AI hardware.
And look at what appears to be inside the processor: an extra graphics core, and much more space devoted to neural processing.
The estimated compute die area is still roughly the same as the previous generation: about zero point one five square inches, or ninety-eight square millimeters. This chip uses TSMC's N two process.
That would put more graphics and neural hardware into about the same area. Moving memory beside it allows a wider interface and could give the heat a better way out.
The next time you picture that stack, remember what Apple moved.
Sources:
techinsights.com/blog/apple-a20-pro-tsmc-2nm-processor-analysis
#Apple #iPhone #Chips #Tech #shorts #Shorts
Apple's A twenty Pro wires memory ninety-six bits wide by moving that memory off the top of the chip.
That sounds like a strange use of space inside a phone. Stack the memory on top of the processor and you can fit them over the same patch of circuit board. That's the idea behind package-on-package.
But now you've put something directly above the processor, where you also want heat to get out.
TechInsights' preliminary teardown of the iPhone eighteen Pro found that Apple changed this arrangement for the A twenty Pro. The processor and memory sit beside each other inside a wafer-level multi-chip module.
Picture taking the top package off that stack and setting it down alongside the processor. The processor now has space above it, and that arrangement may help heat move away from it.
There's also the connection to memory. Graphics and on-device AI need data from that memory to do their work. A wider connection can carry more data at once.
The preliminary analysis points to a ninety-six-bit LPDDR5X interface. That's the width of the data connection. More room to feed the graphics and AI hardware.
And look at what appears to be inside the processor: an extra graphics core, and much more space devoted to neural processing.
The estimated compute die area is still roughly the same as the previous generation: about zero point one five square inches, or ninety-eight square millimeters. This chip uses TSMC's N two process.
That would put more graphics and neural hardware into about the same area. Moving memory beside it allows a wider interface and could give the heat a better way out.
The next time you picture that stack, remember what Apple moved.
Sources:
techinsights.com/blog/apple-a20-pro-tsmc-2nm-processor-analysis
#Apple #iPhone #Chips #Tech #shorts #Shorts










