DIYTyler | White Marble Epoxy Counter Top | Is an Epoxy Surface Worth it?🤷🏼‍♂️ @DIYTyler | Uploaded 3 years ago | Updated 2 minutes ago
Today we are going to show you how to a White Marble Epoxy a Counter to complete our double vanity we built a few weeks back. It is a lot of steps but it is really easier than you might think! Is an epoxy surface worth it compared to laminate?
Thanks to Total Boat for sponsoring this video! Check out their products, including the marble kit we used: totalboat.com
We started with a double layer of 3/4" MDF that we laminated together to get a thick, stable counter top. We then primed with white primer, poured a seal coat of tinted white epoxy and let that cure. Then followed up with another thicker layer of white epoxy and added black fissure lines by hand using some black tinted epoxy, after the resin had set up enough to be stable but not flow off the counter we removed the tap from the edges so that the white and black epoxy would spill over the edge.
We cleaned up the drip marks, flipped the counter over and poured a seal coat of epoxy on the bottom of the counter. Once the bottom throughouly cured we flipped the counter back over to pour a clear layer of epoxy on the top of the counter to seal the entire piece,
Add the faucets and install! Looks great and has been holding up perfectly for about 5 weeks so far now.
Is epoxy easier, or cheaper than laminate, no but you can make things you cannot by and while the process is a lot of steps it is not difficult and pretty fun! Many people comment on the counter, it catches your eye.
🎥Subscribe! http://bit.ly/2UJxXZW​
👕Spray finish or don't do it shirts and hoodies! https://DIYTyler.com/merch​
We LOVE our Carolina Boots! Save 20% off select styles using code DIYTYLER20
http://carolinashoe.com/diytyler
📔📙All our Digital Plans: http://bit.ly/2Mm6slA​
Tools I Use (affiliate links):
Cutting Board Finish: amzn.to/3sonlfX
Cutting Board Feet: amzn.to/3tt6VV4
Mixing-Mate Paint Lid: amzn.to/2vXsq7P
SafeCut Ruler: amzn.to/32kqS4m
Track Guide: amzn.to/3uXhpfx
True Position Tool Hardware Jig: amzn.to/3lwRwzG
Tool Belt: amzn.to/2Qv40wt
IsoTunes Xtra: amzn.to/2NBu7zw
Kreg R3: amzn.to/2DxC6t3
Kreg K5: amzn.to/355jfOC
Kreg Foreman: amzn.to/3iYR4Zu
Kreg ACS Track Saw: amzn.to/2OZXVVw
Kreg Drawer Slide Jig: amzn.to/355rIBp
Kreg Drawer Pull Jig: amzn.to/3fqy5VA
Kreg Screws: amzn.to/304j2KK
Kreg Clamps: amzn.to/2ZlRyRz
Switchpod (mini tripod): bit.ly/2JUMET1
Moisture Meter: amzn.to/2SwBy9i
FastCap 16oz Glue Bot: amzn.to/3vNe9EN
FastCap 4oz Babe Bot: http://amzn.to/1KEuIUf
Swanson Combination Square: amzn.to/3f2kiab
Bessey Quick Clamps: amzn.to/3r5EpGY
FastCap Tape Measure: amzn.to/3172EtN
Items specific to the finishing setup:
Fuji Q5 5 Stage Turbine Spray System: amzn.to/2J2DMei
Harbor Freight Toolbox: http://bit.ly/2VRIEI6
3M Full face Respirator: amzn.to/2BmP3Sb
3M Organic Vapor Cartridge: amzn.to/3c8cYrU
3M PPS 2.0 Fitting #18 - 26054 (for T70) http://bit.ly/2IZlbzp
3M PPS 2.0 Fitting #2 26003 (for T75G) amzn.to/35HjVuH
3M 177 ml Pressurized H/O Cup - 26121 http://bit.ly/35HrfGB
3M 850 ml Pressurized H/O Cup - 26124 http://bit.ly/2P006sM
3M PPS Large Cup Ratio Inserts - 16091 amzn.to/2OVvCYF
3M PPS 13. 5 oz Mix Ratio Insert - 16155 amzn.to/3vOTj7X
3M PPS 2. 0 Cup Lid - 26204 for 177 H/O Cup amzn.to/3rcKEZu
3M PPS 2.0 Cup/Cap/Liner/ Lid Standard amzn.to/318hVdW
Follow us:
https://DIYTyler.com​
instagram.com/diytylerg/​
facebook.com/DIYTyler
#epoxymarble #epoxycounter #howtoepoxy101
Today we are going to show you how to a White Marble Epoxy a Counter to complete our double vanity we built a few weeks back. It is a lot of steps but it is really easier than you might think! Is an epoxy surface worth it compared to laminate?
Thanks to Total Boat for sponsoring this video! Check out their products, including the marble kit we used: totalboat.com
We started with a double layer of 3/4" MDF that we laminated together to get a thick, stable counter top. We then primed with white primer, poured a seal coat of tinted white epoxy and let that cure. Then followed up with another thicker layer of white epoxy and added black fissure lines by hand using some black tinted epoxy, after the resin had set up enough to be stable but not flow off the counter we removed the tap from the edges so that the white and black epoxy would spill over the edge.
We cleaned up the drip marks, flipped the counter over and poured a seal coat of epoxy on the bottom of the counter. Once the bottom throughouly cured we flipped the counter back over to pour a clear layer of epoxy on the top of the counter to seal the entire piece,
Add the faucets and install! Looks great and has been holding up perfectly for about 5 weeks so far now.
Is epoxy easier, or cheaper than laminate, no but you can make things you cannot by and while the process is a lot of steps it is not difficult and pretty fun! Many people comment on the counter, it catches your eye.
🎥Subscribe! http://bit.ly/2UJxXZW​
👕Spray finish or don't do it shirts and hoodies! https://DIYTyler.com/merch​
We LOVE our Carolina Boots! Save 20% off select styles using code DIYTYLER20
http://carolinashoe.com/diytyler
📔📙All our Digital Plans: http://bit.ly/2Mm6slA​
Tools I Use (affiliate links):
Cutting Board Finish: amzn.to/3sonlfX
Cutting Board Feet: amzn.to/3tt6VV4
Mixing-Mate Paint Lid: amzn.to/2vXsq7P
SafeCut Ruler: amzn.to/32kqS4m
Track Guide: amzn.to/3uXhpfx
True Position Tool Hardware Jig: amzn.to/3lwRwzG
Tool Belt: amzn.to/2Qv40wt
IsoTunes Xtra: amzn.to/2NBu7zw
Kreg R3: amzn.to/2DxC6t3
Kreg K5: amzn.to/355jfOC
Kreg Foreman: amzn.to/3iYR4Zu
Kreg ACS Track Saw: amzn.to/2OZXVVw
Kreg Drawer Slide Jig: amzn.to/355rIBp
Kreg Drawer Pull Jig: amzn.to/3fqy5VA
Kreg Screws: amzn.to/304j2KK
Kreg Clamps: amzn.to/2ZlRyRz
Switchpod (mini tripod): bit.ly/2JUMET1
Moisture Meter: amzn.to/2SwBy9i
FastCap 16oz Glue Bot: amzn.to/3vNe9EN
FastCap 4oz Babe Bot: http://amzn.to/1KEuIUf
Swanson Combination Square: amzn.to/3f2kiab
Bessey Quick Clamps: amzn.to/3r5EpGY
FastCap Tape Measure: amzn.to/3172EtN
Items specific to the finishing setup:
Fuji Q5 5 Stage Turbine Spray System: amzn.to/2J2DMei
Harbor Freight Toolbox: http://bit.ly/2VRIEI6
3M Full face Respirator: amzn.to/2BmP3Sb
3M Organic Vapor Cartridge: amzn.to/3c8cYrU
3M PPS 2.0 Fitting #18 - 26054 (for T70) http://bit.ly/2IZlbzp
3M PPS 2.0 Fitting #2 26003 (for T75G) amzn.to/35HjVuH
3M 177 ml Pressurized H/O Cup - 26121 http://bit.ly/35HrfGB
3M 850 ml Pressurized H/O Cup - 26124 http://bit.ly/2P006sM
3M PPS Large Cup Ratio Inserts - 16091 amzn.to/2OVvCYF
3M PPS 13. 5 oz Mix Ratio Insert - 16155 amzn.to/3vOTj7X
3M PPS 2. 0 Cup Lid - 26204 for 177 H/O Cup amzn.to/3rcKEZu
3M PPS 2.0 Cup/Cap/Liner/ Lid Standard amzn.to/318hVdW
Follow us:
https://DIYTyler.com​
instagram.com/diytylerg/​
facebook.com/DIYTyler
#epoxymarble #epoxycounter #howtoepoxy101
