The Next Layer | Which 3D Scanner is Best for 3D Printing? @thenextlayer | Uploaded March 2023 | Updated October 2024, 1 hour ago.
In today's video, I test and compare 3 different 3D scanners and tell you which one is the best and if you should get a 3D scanner. Thanks to Onshape for sponsoring today's video. Check them out at https://Onshape.pro/NextLayer.
It's the dream of every 3D printing enthusiast. You see something in the physical world, scan it in seconds, and print it out in an exact replica on your 3D printer just like that. Up until recently, this has only been possible with commercial scanners that cost tens of thousands of dollars, and tons of training to use properly.
These days all of that is changing, and just like 3D printers have become more and more available to consumers, we're also seeing the first wave of consumer grade 3D scanners hit the market. But are they any good?
I tested three different solutions for at-home scanning, and in this video I'm going to compare them all and tell you which one is the best. Stick around to the end because I'll also answer the question that's on everyone's mind... Should you get a 3D scanner?
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: patreon.com/thenextlayer
🛒 AFFILIATE LINKS TO SUPPORT THE CHANNEL: 🛒
📍 Creality CR-Scan Lizard 3d Scanner: jle.vi/creality
📍 Revopoint Mini Scanner: jle.vi/revopoint
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
01:01 The Best At-Home 3D Scanner Contenders
Contender #1: Creality CR-Scan Lizard
Contender #2: Revopoint Mini
Contender #3: iPhone 14 Pro Max
04:10 Round 1: Form Factor and Ease of Use
05:29 Round 2: Software
11:39 Round 3: Price
13:11 Round 4: Scan Results
17:33 Post-Fight: Do You Actually Need A 3D Scanner?
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
In today's video, I test and compare 3 different 3D scanners and tell you which one is the best and if you should get a 3D scanner. Thanks to Onshape for sponsoring today's video. Check them out at https://Onshape.pro/NextLayer.
It's the dream of every 3D printing enthusiast. You see something in the physical world, scan it in seconds, and print it out in an exact replica on your 3D printer just like that. Up until recently, this has only been possible with commercial scanners that cost tens of thousands of dollars, and tons of training to use properly.
These days all of that is changing, and just like 3D printers have become more and more available to consumers, we're also seeing the first wave of consumer grade 3D scanners hit the market. But are they any good?
I tested three different solutions for at-home scanning, and in this video I'm going to compare them all and tell you which one is the best. Stick around to the end because I'll also answer the question that's on everyone's mind... Should you get a 3D scanner?
💬 JOIN MY DISCORD: jle.vi/tnl-discord
🎁 EXCLUSIVE CONTENT ON PATREON: patreon.com/thenextlayer
🛒 AFFILIATE LINKS TO SUPPORT THE CHANNEL: 🛒
📍 Creality CR-Scan Lizard 3d Scanner: jle.vi/creality
📍 Revopoint Mini Scanner: jle.vi/revopoint
🎥 IN THIS VIDEO: 🎥
00:00 Introduction
01:01 The Best At-Home 3D Scanner Contenders
Contender #1: Creality CR-Scan Lizard
Contender #2: Revopoint Mini
Contender #3: iPhone 14 Pro Max
04:10 Round 1: Form Factor and Ease of Use
05:29 Round 2: Software
11:39 Round 3: Price
13:11 Round 4: Scan Results
17:33 Post-Fight: Do You Actually Need A 3D Scanner?
🛒 RECOMMENDED GEAR: 🛒
📍 Complete list of 3D Printing accessories: kit.co/jlevi/3d-printing
📍 Complete list of my videography gear: kit.co/jlevi/content-creation
📍 My favorite 3D printing filament: jle.vi/polymaker
📍 My favorite 3D printer right now: jle.vi/voronkits
📍 My favorite BUDGET 3D printer right now: jle.vi/sovol
📍 Check out the official TNL merch: shop.thenextlayer.com
📍 PLEASE CONSIDER SUPPORTING THE CHANNEL BY SHOPPING USING MY LINKS! FULL LIST CAN BE FOUND AT: jle.vi/links
❤️ LOVED THIS VIDEO? ❤️
▶️ Subscribe to the channel
▶️ Watch my other videos: youtube.com/@thenextlayer
🔔 Turn on Notifications
🎁 Support me on Patreon: patreon.com/thenextlayer
🎁 Send a “Super Thanks” (Tip)
🛒 Use my affiliate links for your 3D printing or videography needs: kit.co/jlevi
💬 Join My Discord: jle.vi/tnl-discord
✍️ Write a comment below!
👍🏿 Like this video
#3dprinting #3dprinted #3dprinter
