Uploaded November 2025 | Updated November 2026, 11 hours ago
A static route, created by the *ip route* global command in a router, defines the details of one route that the router should add to its routing table. It seems simple enough. However, most companies prefer (and rightfully so) to use a dynamic routing protocol like OSPF to learn routes rather than configure static routes.
As it turns out, you may need to configure static routes occasionally. So, Cisco has long included static routes in the CCNA blueprint. This video explains the mechanics of the *ip route* global command, focusing on static network routes, which define routes for a network or subnet. Another video looks at the more specialized cases of host routes, default routes, and floating static routes โ all mentioned in the current CCNA 200-301 V1.1 blueprint.
๐ Matches CCNA Official Cert Guide:
*Volume 1 Chapter 17 Section 3A*
*Chapters*
00:00 Intro
01:45 Observations: Whatโs in an OSPF Route
07:46 Static Routes w/ Both Outgoing Interface and Next-Hop Address
10:04 Static Routes w/ Only Next-Hop Address
13:30 Static Routes w/ Only Outgoing Interface
15:39 Proxy ARP When Using Only the Outgoing Interface
21:16 CCNA Study Group
*Do Config Lab โIP Static Routes 1โ*
๐ง๐ปโ๐ฌ ๐ฝ๏ธ youtu.be/KEJ91sVa3sE (Lab Intro Video)
๐ง๐ปโ๐ฌ ๐ฝ๏ธ youtu.be/fIyyCVszkZs (Lab Review Video)
๐ง๐ปโ๐ฌ certskills.com/clab118 (Lab Blog Page)
========================================
*Product Links*
Product links below. I make a small affiliate sales commission if you buy something!
CCNA Library (Two Book Set):
๐ ccna.link/nu-cp-lib-ed2
All CCNA products at Cisco Press:
๐จ๏ธ ccna.link/nu-cp-allccna
All Wendell's products at Cisco Press:
๐ง๐ผโโ๏ธ ccna.link/nu-cp-allwo
Ciscopress.com/NewCerts Page (News, Announcements):
๐ฐ ccna.link/nu-cp-newcerts
=========================================
A static route, created by the *ip route* global command in a router, defines the details of one route that the router should add to its routing table. It seems simple enough. However, most companies prefer (and rightfully so) to use a dynamic routing protocol like OSPF to learn routes rather than configure static routes.
As it turns out, you may need to configure static routes occasionally. So, Cisco has long included static routes in the CCNA blueprint. This video explains the mechanics of the *ip route* global command, focusing on static network routes, which define routes for a network or subnet. Another video looks at the more specialized cases of host routes, default routes, and floating static routes โ all mentioned in the current CCNA 200-301 V1.1 blueprint.
๐ Matches CCNA Official Cert Guide:
*Volume 1 Chapter 17 Section 3A*
*Chapters*
00:00 Intro
01:45 Observations: Whatโs in an OSPF Route
07:46 Static Routes w/ Both Outgoing Interface and Next-Hop Address
10:04 Static Routes w/ Only Next-Hop Address
13:30 Static Routes w/ Only Outgoing Interface
15:39 Proxy ARP When Using Only the Outgoing Interface
21:16 CCNA Study Group
*Do Config Lab โIP Static Routes 1โ*
๐ง๐ปโ๐ฌ ๐ฝ๏ธ youtu.be/KEJ91sVa3sE (Lab Intro Video)
๐ง๐ปโ๐ฌ ๐ฝ๏ธ youtu.be/fIyyCVszkZs (Lab Review Video)
๐ง๐ปโ๐ฌ certskills.com/clab118 (Lab Blog Page)
========================================
*Product Links*
Product links below. I make a small affiliate sales commission if you buy something!
CCNA Library (Two Book Set):
๐ ccna.link/nu-cp-lib-ed2
All CCNA products at Cisco Press:
๐จ๏ธ ccna.link/nu-cp-allccna
All Wendell's products at Cisco Press:
๐ง๐ผโโ๏ธ ccna.link/nu-cp-allwo
Ciscopress.com/NewCerts Page (News, Announcements):
๐ฐ ccna.link/nu-cp-newcerts
=========================================










