Uploaded April 2023 | Updated September 2026, 3 weeks ago
Today’s video will be the start of another video series. This series will be on building your own digipeater from A to Z running on this inexpensive Linux device here that is similar to a Raspberry Pi and runs the same Raspbian OS that the Raspberry Pi runs.
[SUPPORT]
If you're finding the videos informative and useful, please consider supporting TC²
ko-fi.com/thecommschannel
Page with Instructions:
thecommschannel.com/hamradio/packet_radio/building_digipeater/index.html
===Parts Needed====
Please know, I may collect a share of sales or other compensation from the Amazon affiliate links below.
Le Potato "Tater" Computer
amzn.to/3KL76EQ
16GB or 32GB microSD Card
amzn.to/3GZgALM
5V 3A Power Supply (I recommend this 3A version over what I mentioned in the video)
amzn.to/3HlaNQX
Digirig
amzn.to/43MnyNZ
USB-C Cable for Digirig
amzn.to/3n5qnJk
-----------------------------------------------------------------------------------
Digirig Cables [Select one for your radio below]
Yaesu FT-100, FT817, FT-857, FT-891, FT-897, FT-817ND, FT897D
amzn.to/41q12cc
Baofeng (With K1 connector)
amzn.to/43QN3Og
Some Yaesu HTs with 3.5mm TRRS connector
amzn.to/41IGpYn
If you can't find a Digirig cable for you radio, you can see if Mobilinkd has the cable at their website ➡️ store.mobilinkd.com/collections/all and make a converter by following the instructions in my other video here ➡️ youtu.be/VYMLzuAU8HU
-----------------------------------------------------------------
[OPTIONAL Items]
Case (Any Raspberry Pi 3 case should work)
amzn.to/3UPCS8t
Power supply for hooking up to 12V battery
amzn.to/3UPtMIU
Today’s video will be the start of another video series. This series will be on building your own digipeater from A to Z running on this inexpensive Linux device here that is similar to a Raspberry Pi and runs the same Raspbian OS that the Raspberry Pi runs.
[SUPPORT]
If you're finding the videos informative and useful, please consider supporting TC²
ko-fi.com/thecommschannel
Page with Instructions:
thecommschannel.com/hamradio/packet_radio/building_digipeater/index.html
===Parts Needed====
Please know, I may collect a share of sales or other compensation from the Amazon affiliate links below.
Le Potato "Tater" Computer
amzn.to/3KL76EQ
16GB or 32GB microSD Card
amzn.to/3GZgALM
5V 3A Power Supply (I recommend this 3A version over what I mentioned in the video)
amzn.to/3HlaNQX
Digirig
amzn.to/43MnyNZ
USB-C Cable for Digirig
amzn.to/3n5qnJk
-----------------------------------------------------------------------------------
Digirig Cables [Select one for your radio below]
Yaesu FT-100, FT817, FT-857, FT-891, FT-897, FT-817ND, FT897D
amzn.to/41q12cc
Baofeng (With K1 connector)
amzn.to/43QN3Og
Some Yaesu HTs with 3.5mm TRRS connector
amzn.to/41IGpYn
If you can't find a Digirig cable for you radio, you can see if Mobilinkd has the cable at their website ➡️ store.mobilinkd.com/collections/all and make a converter by following the instructions in my other video here ➡️ youtu.be/VYMLzuAU8HU
-----------------------------------------------------------------
[OPTIONAL Items]
Case (Any Raspberry Pi 3 case should work)
amzn.to/3UPCS8t
Power supply for hooking up to 12V battery
amzn.to/3UPtMIU
