Uploaded March 2017 | Updated November 2026, 3 hours ago
Like me back in the 1980's I took apart so many electronics and most of the time I get yelled at by other family members when I tinkered with something that was theirs, this time around I was curious to see exactly what powers this console released by Mattel back in 1978.
Here are the technical specifications for those curious about said system:
General Instrument CP1610 16-bit microprocessor CPU: 1 microsecond cycle time, 2MHz 2-phase clock[34] (1.7897725 MHz NTSC)
1456 bytes of RAM:
240 × 8-bit scratchpad memory
352 × 16-bit (704 bytes) system memory
512 × 8-bit graphics RAM
7168 bytes of ROM:
4096 × 10-bit (5120 bytes) executive ROM
2048 × 8-bit graphics ROM
Standard Television Interface Chip (STIC): General Instrument AY-3-8900/AY-3-8900-1[35]
20x12 tiled playfield, tiles are 8x8 pixels for a resolution of 159x96 (right pixel not displayed)
16 color palette, any two colors per tile
Colored Squares mode[36] allows each tile to have four different colored 4x4 blocks (eg. Snafu)
fine horizontal and vertical pixel scrolling
8 sprites. Hardware supports the following features per-sprite:
coordinate addressable off screen for smooth edge entries and exits
Size selection: 8x8 or 8 pixels wide by 16 half-pixels high
Stretching: horizontal (1× or 2×) and vertical (1×, 2×, 4× or 8×)
Mirroring: horizontal and vertical
Collision detection: sprite to sprite, sprite to background, and sprite to screen border
Priority: selects whether sprite appears in front of or behind background.
Three-channel sound, with one noise generator (audio chip: General Instrument AY-3-8914)
Thank you once again to all my subscribers from the beginning and my new viewers as well, feel free to check my older content too, cheers.
Facebook Fan Page:
youtube.com/oldschoolnycgamer
Twitter:
twitter.com/osnycgamer
DailyMotion:
dailymotion.com/oldschoolnycgamer
Like me back in the 1980's I took apart so many electronics and most of the time I get yelled at by other family members when I tinkered with something that was theirs, this time around I was curious to see exactly what powers this console released by Mattel back in 1978.
Here are the technical specifications for those curious about said system:
General Instrument CP1610 16-bit microprocessor CPU: 1 microsecond cycle time, 2MHz 2-phase clock[34] (1.7897725 MHz NTSC)
1456 bytes of RAM:
240 × 8-bit scratchpad memory
352 × 16-bit (704 bytes) system memory
512 × 8-bit graphics RAM
7168 bytes of ROM:
4096 × 10-bit (5120 bytes) executive ROM
2048 × 8-bit graphics ROM
Standard Television Interface Chip (STIC): General Instrument AY-3-8900/AY-3-8900-1[35]
20x12 tiled playfield, tiles are 8x8 pixels for a resolution of 159x96 (right pixel not displayed)
16 color palette, any two colors per tile
Colored Squares mode[36] allows each tile to have four different colored 4x4 blocks (eg. Snafu)
fine horizontal and vertical pixel scrolling
8 sprites. Hardware supports the following features per-sprite:
coordinate addressable off screen for smooth edge entries and exits
Size selection: 8x8 or 8 pixels wide by 16 half-pixels high
Stretching: horizontal (1× or 2×) and vertical (1×, 2×, 4× or 8×)
Mirroring: horizontal and vertical
Collision detection: sprite to sprite, sprite to background, and sprite to screen border
Priority: selects whether sprite appears in front of or behind background.
Three-channel sound, with one noise generator (audio chip: General Instrument AY-3-8914)
Thank you once again to all my subscribers from the beginning and my new viewers as well, feel free to check my older content too, cheers.
Facebook Fan Page:
youtube.com/oldschoolnycgamer
Twitter:
twitter.com/osnycgamer
DailyMotion:
dailymotion.com/oldschoolnycgamer
