Uploaded November 2026 | Updated November 2026, 21 hours ago
Wondering what to check during an AC maintenance tune-up? In this video, we walk through a full residential AC tune-up, from testing the capacitor at the condenser to flushing the drain line at the air handler.
Outside, we check the amp draw on the condenser fan motor and the compressor, then measures the power factor. A power factor below 0.94 is an early sign of a weak capacitor. After the power is disconnected and confirmed off, both sides of the dual run capacitor are tested against their rated µF, using a 10% tolerance to decide whether it’s still in range.
With the system running, we take noninvasive readings with measureQuick to confirm performance on a 3-ton system without gauging up. The readings include suction and liquid line temperatures, return and supply dry bulb and dew point, a 20.5°F temperature split, and airflow. If everything reads in the green, there’s no need to connect gauges.
Inside, the maintenance continues with:
Testing the float switch
Inspecting the blower wheel and evaporator coil
Checking the PVC drain line for sags that can create a double trap
Flushing the drain line until the water in the vacuum runs clear, then priming the trap
Pushing insulation back off the panel so it doesn’t sweat when it reaches dew point
Every tech runs a tune-up a little differently. This is one field-proven process for catching problems early and preventing callbacks.
---
NEXT VIDEO
Why We Clean Every Drain Line: A 5-Step Callback Prevention Checklist
youtube.com/watch?v=MYi4EHtfCEE&t=8s
KEEP LEARNING
Start here:
hvacrschool.com/start
Free HVAC/R training, tech tips, quizzes, calculators, courses, and more:
hvacrschool.com
Listen to the HVAC School podcast:
hvacrschool.com/podcast
Get the HVAC School app:
hvacrschool.com/apps-page
HVAC School provides free HVAC/R training—primarily for techs, by techs. The goal is not just to collect facts. It is to understand the system well enough to apply what you know in the field.
Questions or corrections? Leave a comment and include the equipment model, measurements, and source when you can. None of us gets everything right, and good measurements beat confident guesses.
This content is educational. Follow manufacturer instructions, use proper PPE and safe work practices, and comply with the codes and standards that apply to your equipment and jurisdiction.
Wondering what to check during an AC maintenance tune-up? In this video, we walk through a full residential AC tune-up, from testing the capacitor at the condenser to flushing the drain line at the air handler.
Outside, we check the amp draw on the condenser fan motor and the compressor, then measures the power factor. A power factor below 0.94 is an early sign of a weak capacitor. After the power is disconnected and confirmed off, both sides of the dual run capacitor are tested against their rated µF, using a 10% tolerance to decide whether it’s still in range.
With the system running, we take noninvasive readings with measureQuick to confirm performance on a 3-ton system without gauging up. The readings include suction and liquid line temperatures, return and supply dry bulb and dew point, a 20.5°F temperature split, and airflow. If everything reads in the green, there’s no need to connect gauges.
Inside, the maintenance continues with:
Testing the float switch
Inspecting the blower wheel and evaporator coil
Checking the PVC drain line for sags that can create a double trap
Flushing the drain line until the water in the vacuum runs clear, then priming the trap
Pushing insulation back off the panel so it doesn’t sweat when it reaches dew point
Every tech runs a tune-up a little differently. This is one field-proven process for catching problems early and preventing callbacks.
---
NEXT VIDEO
Why We Clean Every Drain Line: A 5-Step Callback Prevention Checklist
youtube.com/watch?v=MYi4EHtfCEE&t=8s
KEEP LEARNING
Start here:
hvacrschool.com/start
Free HVAC/R training, tech tips, quizzes, calculators, courses, and more:
hvacrschool.com
Listen to the HVAC School podcast:
hvacrschool.com/podcast
Get the HVAC School app:
hvacrschool.com/apps-page
HVAC School provides free HVAC/R training—primarily for techs, by techs. The goal is not just to collect facts. It is to understand the system well enough to apply what you know in the field.
Questions or corrections? Leave a comment and include the equipment model, measurements, and source when you can. None of us gets everything right, and good measurements beat confident guesses.
This content is educational. Follow manufacturer instructions, use proper PPE and safe work practices, and comply with the codes and standards that apply to your equipment and jurisdiction.










