Uploaded March 2025 | Updated September 2026, 22 minutes ago
The Digestion Jam
A school project done over the course of a week. Using what we've learned in biology class about the digestive system, we were to turn our lesson content into a children's storybook, music video, or TEDtalk; obviously I knew which one I was going to choose
Neither the animations, nor the music are up to Digital Hourglass channel standards since it was rushed to be completed in under a week
Song created with FL Studio
Animations and graphics created with Krita
Edited in Filmora
Join this channel to get access to perks:
youtube.com/channel/UCyVyj6AfoO4ojNoEo-RKe3g/join
--------------------------------------------------
PLANET TIER MEMBERS
thesun101lolhaha: youtube.com/channel/UCNHlAwqhMzm6Qb4pLTZhN3A
Amun and Iapetus: youtube.com/channel/UCmJ_HNPDROBb-5t_v4A9b0Q
TheGaming_Meteor: youtube.com/channel/UCMW-vyfXc9B00aE0ZBXoxXw
PJ Kelly: youtube.com/channel/UCf5OMr0aHs9da4GdKQDzfwQ
Spaceman 14: youtube.com/channel/UCAo1vZgafdCow_ZnwTlCmXw
Tameka Marshall: youtube.com/channel/UClwhRuZYlDfID8nYHUMhM4Q
Am K: youtube.com/channel/UCxCwPPaNCjDb8YMxV060U1Q
DWARF PLANET TIER MEMBERS
Smiggy:
youtube.com/channel/UCkO4FGV8oFRFXZ34ew77oyw
Lanny: youtube.com/channel/UCOgWPVJyXXb2x802OlA3YKQ
fruxi: youtube.com/channel/UC_WTDuS-i-HkerCsQm0D2gQ
The Digestion Jam
A school project done over the course of a week. Using what we've learned in biology class about the digestive system, we were to turn our lesson content into a children's storybook, music video, or TEDtalk; obviously I knew which one I was going to choose
Neither the animations, nor the music are up to Digital Hourglass channel standards since it was rushed to be completed in under a week
Song created with FL Studio
Animations and graphics created with Krita
Edited in Filmora
Join this channel to get access to perks:
youtube.com/channel/UCyVyj6AfoO4ojNoEo-RKe3g/join
--------------------------------------------------
PLANET TIER MEMBERS
thesun101lolhaha: youtube.com/channel/UCNHlAwqhMzm6Qb4pLTZhN3A
Amun and Iapetus: youtube.com/channel/UCmJ_HNPDROBb-5t_v4A9b0Q
TheGaming_Meteor: youtube.com/channel/UCMW-vyfXc9B00aE0ZBXoxXw
PJ Kelly: youtube.com/channel/UCf5OMr0aHs9da4GdKQDzfwQ
Spaceman 14: youtube.com/channel/UCAo1vZgafdCow_ZnwTlCmXw
Tameka Marshall: youtube.com/channel/UClwhRuZYlDfID8nYHUMhM4Q
Am K: youtube.com/channel/UCxCwPPaNCjDb8YMxV060U1Q
DWARF PLANET TIER MEMBERS
Smiggy:
youtube.com/channel/UCkO4FGV8oFRFXZ34ew77oyw
Lanny: youtube.com/channel/UCOgWPVJyXXb2x802OlA3YKQ
fruxi: youtube.com/channel/UC_WTDuS-i-HkerCsQm0D2gQ

![How many international flags can an 8 year old name?
https://www.amazon.com/International-Countries-Decorations-Festival-Celebration/dp/B01GJO01E0/ref=sr_1_1?ie=UTF8&qid=1508131370&sr=8-1&keywords=international+flags+200+countries
This banner of international flags was purchased on October 12, 2017. Its described as 164 ft long with 200 flags but actually contains 202 flags. Most of the flags were upside down when they were named which country they belonged to. Still working on learning all the flags of the countries as well as their capitals. Final tally was 185 correctly named vs 17 skipped or incorrectly named.
Song: Jordan Schor - Cosmic (feat. Nathan Brumley) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/LVh4PFKNzMA
Download/Stream: http://ncs.io/CosmicYO How many international flags can an 8 year old name?](https://i.ytimg.com/vi/i0ZiyfWfajU/mqdefault.jpg)

![1K Sub giveaway winner
Congratulations to the winner of the planet plate set giveaway. There were 24 commenters eligible for the giveaway but only one winner drawn. Drawing is now closed but pending the response of the winner - 04-21-2019
Thanks to everyone who commented to enter the giveaway and special thanks to all the faithful subbies! You know who you are!
If youd like to see a video of how my parents made the 1K sub plaque for me, please comment down below.
Materials used are a $5 see-through glass frame from Meijers, transparency printer paper, hot glue, and the below 3D printed objects from our 3D printer.
Custom 3D printed Play Button:
https://www.thingiverse.com/thing:2378520
MUSIC:
Track: Au5 & Last Heroes - Lush (feat. Holly Drummond) [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/0FWsl37Mcak
Free Download / Stream: http://ncs.io/LushYO 1K Sub giveaway winner](https://i.ytimg.com/vi/iP4etIG3BF4/mqdefault.jpg)


![Quicksilver Slime figure: Creatibles DIY Eraser Kit
In this video we make the Quicksilver slime with Creatibles DIY Eraser Kit and cover it with silver glitter. I also introduce the new improved Gold Slime which is covered in gold glitter.
To add the glitter, we just rubbed it into the eraser until it stuck. The eraser is sticky enough that it holds most of the glitter.
After making the eraser, it must be baked between 210 - 250 degrees F for 30 minutes. Then it needs to cool for 1 hour.
These 2 slimes are pretty much for display only because playing with them usually makes the glitter start to come off.
https://www.amazon.com/OOLY-newly-Creatibles-Erasers-161-001/dp/B00OA6T8TO/ref=sr_1_2?ie=UTF8&qid=1533001605&sr=8-2&keywords=creatibles+diy+eraser+kit
Music:
Paul Flint - Savage [NCS Release]
https://www.youtube.com/watch?v=8uSx3DyJjk0&t=0s&list=LLlBK7WkHlXWQMqCmF8VQDdQ&index=67
Paul Flint
• https://soundcloud.com/paulflintmusic
• https://www.facebook.com/paulflintmusic
• https://twitter.com/paulflintmusic
• https://www.instagram.com/paulflintmu...
• Mastering by http://redwolfmastering.com Quicksilver Slime figure: Creatibles DIY Eraser Kit](https://i.ytimg.com/vi/i_ECfvmI1W8/mqdefault.jpg)
![Celestial Buddies (minis) - 3D printed
While creating the Celestial Buddy Venus in Makers Empire, I got the idea to try to make a Celestial Buddy on my 3D Printer.
Part 2: https://www.youtube.com/watch?v=LqmhfZacfTE&t
Part 3: https://www.youtube.com/watch?v=swr2HQzaUIg&t
Part 4: https://www.youtube.com/watch?v=Z_cIg0c2NQk&t
Celestial Buddies: https://www.celestialbuddies.com/
Celestial Buddies Facebook: https://www.facebook.com/Celestial-Buddies-185421934832566/
* Check me out on Makers Empire under Digital Hourglass:
https://www.makersempire.com/
To create the 3D printed creations, I use a free program called TinkerCad to create the Celestial Buddies (Mercury, Venus, Earth, and Mars). That would actually make them the Terrestial Buddies!!! Lol
https://www.tinkercad.com/
After I 3D printed the Celestial Buddies, I colored them with permanent markers.
3D printer is a Qidi Tech X-one2 3D printer: https://www.amazon.com/QIDI-TECHNOLOGY-New-Generation-Printer/dp/B01HZ4HY9I
AFFILIATES
**Please note** These links are affiliate links, which means that if you click on one of the product links and make a purchase, Ill receive a small commission on certain products at no extra cost to you. This helps support the channel and allows me to continue to make great content. It also really proves that you love me as much as I love you. XD I only recommend products/companies that Ive used and love. Thank you for your support!!!
-AstroReality website http://bit.ly/2psgBDs
-Solar System Mini Set http://bit.ly/2BW0YGX
MUSIC:
Track: Diamond Eyes - Stars [NCS Release]
Music provided by NoCopyrightSounds.
Watch: https://youtu.be/Fmf-G9fpwto
Free Download / Stream: http://ncs.io/Stars Celestial Buddies (minis) - 3D printed](https://i.ytimg.com/vi/iaRc5VEsQ0I/mqdefault.jpg)
![Tour of ALL my Solar System Sets
I got a problem! I cant stop collecting Solar System sets lol
I give a quick tour of every set I can find (and then some) in my home. Most are from when I was very little but some are very pro. Stay until the end (or skip forward) to see my top picks.
Join this channel to get access to perks:
https://www.youtube.com/channel/UCyVyj6AfoO4ojNoEo-RKe3g/join
@JonsUTube
From Celestial Buddies - check out Debby! ;D
MUSIC
Killercats - Kaibu [NCS Release]
https://www.youtube.com/watch?v=qLYmtdi-GzA
Killercats
• https://soundcloud.com/kcatsofficial
• https://www.facebook.com/kcatsofficial/
• https://www.youtube.com/c/killercatsofficial
• https://www.instagram.com/killercatsofficial/ Tour of ALL my Solar System Sets](https://i.ytimg.com/vi/kAxKznpfxfM/mqdefault.jpg)
![3D Printer Fun: Qidi X-One2 - Cool Printations
I reveal a few of my 3D printer printations: Vase for my mom; Simple desktop solar system; Grip for a Nintendo Switch Joy-Con Contoller; Earth vase for pens. Be sure to like and/or comment on this video if you want to see more of these videos!
The 3D printer I use is the Qidi tech X-One2. Comes with a starter roll of orange PLA wire for printing. (PLA vs ABS wire - PLA is better for detailed projects and smells better - ABS is a bit stronger but smells like burning plastic) Set up literally took my dad about 30 minutes and we were printing the test print. No calibration was needed. It has been a superb starter 3D printer!!
https://www.amazon.com/QIDI-TECHNOLOGY-New-Generation-Printer/dp/B01HZ4HY9I/ref=sr_1_5?ie=UTF8&qid=1550498447&sr=8-5&keywords=qidi+tech+3d+printer
This 3D printer also comes with its own SLICER program, a SD card and a SD card reader to transfer your STL files from your computer to this 3D printer. The STL files are everywhere on the internet; some popular sites we use: Yeggi, Thingiverse.
https://www.thingiverse.com/thing:1746153
https://www.thingiverse.com/thing:2769344
https://www.myminifactory.com/object/3d-print-earth-penholders-56784
The SLICER program takes the STL files you download from the internet and slices the model of your choice into algorithmic grids that this 3D printer can read. All STL files need to be processed by a SLICER program in order to printed with a 3D printer
Ive printed 8 of these Nintendo Switch Joy-Con grips and they have all worked perfectly. Each one takes about 4 hours to print. The top buttons need to be printed separately but they only take about 30 minutes. After theyre printed, my dad takes a sharp razor knife and shaves off any flashing from the supports that I tear off. Then he sands it for a smooth finish.
If you have a Nintendo Switch and want grips similar to the ones I printed, my dad was originally going to buy these for me:
https://www.amazon.com/FASTSNAIL-Nintendo-Switch-Wear-resistant-Controller/dp/B06XZ1PCKK/ref=sr_1_1_sspa?s=videogames&ie=UTF8&qid=1550498688&sr=1-1-spons&keywords=nintendo+switch+joy+con+grip&psc=1
Music:
This track is free to use on YouTube. Just add this in your description when you are using this track:
Track: Altrøx - Spartan [NCN Release]
Music provided by NoCopyrightNation
YouTube: https://www.youtube.com/watch?v=nbTOSzXxD9U&list=LLyVyj6AfoO4ojNoEo-RKe3g&index=46
• Altrøx - Spartan (NCN Release)
Stream/Download: https://ncn.ffm.to/altrox-spartan
Support Altrøx:
Facebook: https://www.facebook.com/ahmad.ghaith.75?ref=bookmarks
Instagram: https://www.instagram.com/ahmadghaith/?hl=en
SoundCloud: https://soundcloud.com/ahmad-ghaith
Youtube: https://www.youtube.com/channel/UCNILsCN_LimH5L_25yAS9fQ
SFX:
orangefreesounds sfx
http://www.orangefreesounds.com/ding-sound-shiny/
zapsplat sfx
https://www.zapsplat.com/sound-effect-category/ascend/page/6/
https://www.zapsplat.com/sound-effect-category/audiences-and-crowds/page/11/ 3D Printer Fun: Qidi X-One2 - Cool Printations](https://i.ytimg.com/vi/kUik_a0RjdE/mqdefault.jpg)
