Uploaded January 2021 | Updated November 2026, 2 days ago
WhamBam's newest 3D printer upgrade: A simple, but effective toolchanger, complete with electrical connections that's available NOW! Should you order one?
Get the WhamBam Mutant go.toms3d.org/mutant - 15% off Mutant with code "layers" (valid through Jan. 25th)Also check out 3D printing deals during Amazon's Prime Days! go.toms3d.org/AmazonPrimeDeals
Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)
Read the article to this video here: toms3d.org/2021/01/21/whambam-mutant-a-quick-change-toolhead-upgrade-for-any-3d-printer-not-on-kickstarter
π©΅ Support the channel by shopping through my affiliate links
Buy Bambu Lab printers and printer accessories go.toms3d.org/Bambu
Buy Prusa Research printers and printer accessories go.toms3d.org/prusa
Tools I use:
π© Onshape Cloud-native CAD (free for Makers) https://onshape.pro/ThomasSanladerer
π΅ Epidemic Sound for video music (30-day trial) share.epidemicsound.com/MadeWithLayers
π· Camera gear and recording equipment (not free, unfortunately) toms3d.org/my-gear
π§ Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
π Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp
WhamBam's newest 3D printer upgrade: A simple, but effective toolchanger, complete with electrical connections that's available NOW! Should you order one?
Get the WhamBam Mutant go.toms3d.org/mutant - 15% off Mutant with code "layers" (valid through Jan. 25th)Also check out 3D printing deals during Amazon's Prime Days! go.toms3d.org/AmazonPrimeDeals
Product links are affiliate links - I may earn a commission on qualifying purchases (at no extra cost to you)
Read the article to this video here: toms3d.org/2021/01/21/whambam-mutant-a-quick-change-toolhead-upgrade-for-any-3d-printer-not-on-kickstarter
π©΅ Support the channel by shopping through my affiliate links
Buy Bambu Lab printers and printer accessories go.toms3d.org/Bambu
Buy Prusa Research printers and printer accessories go.toms3d.org/prusa
Tools I use:
π© Onshape Cloud-native CAD (free for Makers) https://onshape.pro/ThomasSanladerer
π΅ Epidemic Sound for video music (30-day trial) share.epidemicsound.com/MadeWithLayers
π· Camera gear and recording equipment (not free, unfortunately) toms3d.org/my-gear
π§ Check out the Meltzone Podcast (with CNC Kitchen)! youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
π Enjoying the videos? Support my work on Patreon! patreon.com/toms3dp








![Use the new PrusaSlicer 2.3 with ANY 3D Printer!
PrusaSlicer 2.3 is (nearly) out and it comes with loads of new, useful features and improvements. But even if you dont use an Original Prusa printer, you can still make use of them and set up PrusaSlicer for basically any machine - and sneakily use Prusas tuned profiles, too!
Download PrusaSlicer https://www.prusa3d.com/prusaslicer/
Manufacturers config guide https://github.com/prusa3d/PrusaSlicer/wiki/Vendor-bundles-and-updating-process
Start gcode (the [ ] sections will get filled in by PrusaSlicer automatically in the exported gcode)
M104 S[first_layer_temperature] ; set extruder temp
M140 S[first_layer_bed_temperature] ; set bed temp
M190 S[first_layer_bed_temperature] ; wait for bed temp
M109 S[first_layer_temperature] ; wait for extruder temp
G28 ; home all axes
G29 ; autolevel
G1 Z5 F5000 ; lift nozzle
G1 Y0 F9001 ; go to front edge of the bed
G92 E0.0 ; reset extruder position
G1 X60.0 E9.0 F1000.0 ; intro line
G1 X100.0 E12.5 F1000.0 ; intro line
G92 E0.0 ; reset extruder position
End gcode
M104 S0 ; turn off temperature
M140 S0 ; turn off heatbed
M107 ; turn off fan
G1 X0 Y200 F9001 ; home X axis, present print
M84 ; disable motors
Read the article to this video here: https://toms3d.org/2020/12/28/prusaslicer-2-3/
π©΅ Support the channel by shopping through my affiliate links
Buy Bambu Lab printers and printer accessories https://go.toms3d.org/Bambu
Buy Prusa Research printers and printer accessories https://go.toms3d.org/prusa/
Tools I use:
π© Onshape Cloud-native CAD (free for Makers) https://onshape.pro/ThomasSanladerer
π΅ Epidemic Sound for video music (30-day trial) https://share.epidemicsound.com/MadeWithLayers
π· Camera gear and recording equipment (not free, unfortunately) https://toms3d.org/my-gear
π§ Check out the Meltzone Podcast (with CNC Kitchen)! https://www.youtube.com/channel/UCzUgJrG-w_KQexroYkJR9XQ
π Enjoying the videos? Support my work on Patreon! https://www.patreon.com/toms3dp Use the new PrusaSlicer 2.3 with ANY 3D Printer!](https://i.ytimg.com/vi/Wz2Soog4HkQ/mqdefault.jpg)

