VogMan | Wham Bam flexible plate review - using a flex plate in Resin 3D printing - by VOGMAN @vogman | Uploaded October 2021 | Updated October 2024, 8 minutes ago.
Are flexible build plates worthwhile? Are they any better than a standard scraper? Is there more cleaning needed? These are just some of the questions I posed when asked to review the Wham Bam system for 3D Resin printers.
*UPDATE: WHAM BAM DISCOUNT CODE...*
You can use code VOG2022 at the official Wham Bam store to get 10% off your order (this code is valid until mid 2023) bit.ly/3xC5W8d
*** WHAM BAM ***
Wham Bam Support Video : bit.ly/39EIHlR
Wham Bam official store : bit.ly/39EIHlR
UK Supplier : 3dprintz.co.uk
*** OTHER EQUIPMENT & PRODUCTS USED ***
There's a lot of equipment mentioned in this video, so to make life easier I’ve made a list with links on my website here vegoilguy.co.uk/equipment.php
*** PLEASE SUPPORT THIS CHANNEL ***
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here: patreon.com/vegoilguy - Or if you prefer to make a PayPal donation, you can do that here - vegoilguy.co.uk/donations
*** USEFUL 3D RESIN PRINTING VIDEOS ***
Better print cleaning youtu.be/kL9TCjtPbw4
Better print supports youtu.be/MU0Cq_bjhy4
Easy build enclosure heater youtu.be/bQmmGj6gMdk
0:00 Introduction
1:18 Instructions
4:52 Fitting
5:16 Print Adhesion
5:33 Instructions
6:02 Print removal
6:31 My thoughts
*** LINKS ***
vegoilguy.co.uk
instagram.com/vegoilguy
facebook.com/groups/vegoilguy
etsy.com/uk/shop/VegOilGuy
patreon.com/vegoilguy
*** DISCLAIMER ***
This product was given to me, free of charge and without obligation. No money has changed hands and the only agreement made was that I video an INDEPENDENT review, expressing my own personal and above all honest thoughts on the product.
*** ETSY STORE ***
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel.
etsy.com/uk/shop/VegOilGuy
#3dprinting
#3dresinprinting
#vegoilguy
#vog
Are flexible build plates worthwhile? Are they any better than a standard scraper? Is there more cleaning needed? These are just some of the questions I posed when asked to review the Wham Bam system for 3D Resin printers.
*UPDATE: WHAM BAM DISCOUNT CODE...*
You can use code VOG2022 at the official Wham Bam store to get 10% off your order (this code is valid until mid 2023) bit.ly/3xC5W8d
*** WHAM BAM ***
Wham Bam Support Video : bit.ly/39EIHlR
Wham Bam official store : bit.ly/39EIHlR
UK Supplier : 3dprintz.co.uk
*** OTHER EQUIPMENT & PRODUCTS USED ***
There's a lot of equipment mentioned in this video, so to make life easier I’ve made a list with links on my website here vegoilguy.co.uk/equipment.php
*** PLEASE SUPPORT THIS CHANNEL ***
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here: patreon.com/vegoilguy - Or if you prefer to make a PayPal donation, you can do that here - vegoilguy.co.uk/donations
*** USEFUL 3D RESIN PRINTING VIDEOS ***
Better print cleaning youtu.be/kL9TCjtPbw4
Better print supports youtu.be/MU0Cq_bjhy4
Easy build enclosure heater youtu.be/bQmmGj6gMdk
0:00 Introduction
1:18 Instructions
4:52 Fitting
5:16 Print Adhesion
5:33 Instructions
6:02 Print removal
6:31 My thoughts
*** LINKS ***
vegoilguy.co.uk
instagram.com/vegoilguy
facebook.com/groups/vegoilguy
etsy.com/uk/shop/VegOilGuy
patreon.com/vegoilguy
*** DISCLAIMER ***
This product was given to me, free of charge and without obligation. No money has changed hands and the only agreement made was that I video an INDEPENDENT review, expressing my own personal and above all honest thoughts on the product.
*** ETSY STORE ***
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel.
etsy.com/uk/shop/VegOilGuy
#3dprinting
#3dresinprinting
#vegoilguy
#vog
![UniFormation GKtwo 3D resin printer [HONEST REVIEW]](https://i.ytimg.com/vi/ie18N4GrMVY/hqdefault.jpg "UniFormation GKtwo 3D resin printer [HONEST REVIEW]
This is the most innovative resin printer Ive seen ( https://bit.ly/3YChxjL ). The UniFormation GK2 has gone from being a printer Ive never heard of to the one thats impressed me most since the Anycubic Ultra. No, its not a DLP, but it is packed with genuinely clever thinking, and for me its destined to be a huge influencer on the printing industry.
*UNIFORMATION GKtwo PRINTER*
Official website ▶ https://bit.ly/3YChxjL
Amazon UK ▶ https://amzn.to/3IGlkY9
Amazon US ▶ https://amzn.to/3YCzFu8
Amazon CA ▶ https://amzn.to/3q0hrqd
Amazon FR ▶ pending
Amazon DE ▶ pending
Amazon ES ▶ https://amzn.to/44YKFVt
Amazon IT ▶ pending
AliExpress ▶ https://bit.ly/416uvrK
*USEFUL LINKS*
• *VogMans pick Best Midrange printer* ▶ https://tinyurl.com/3wwkemnk
• *VogMans printer selection guide* ▶ https://tinyurl.com/bddpvud5
• *VogMans recommended equipment list* ▶ https://tinyurl.com/ynhuvj7s
══════════════════════════════════════════
💚 *V O G M A N S P I C K S* 💚
*Which printer do you need? Click here for help* ▶ http://tinyurl.com/5xfzxvme
_*Best Budget printer*_ ▶ https://tinyurl.com/52ku5vdb
_*Best DLP printer*_ ▶ https://tinyurl.com/43zp5648
_*Best Standard printers*_ ▶ https://tinyurl.com/mr37js37
_*Best Midrange printers*_ ▶ https://tinyurl.com/3wwkemnk
_*Best Large printers*_ ▶ https://tinyurl.com/2p8epxc8
_*Best Resins*_ ▶ https://tinyurl.com/2vp5kcvz
══════════════════════════════════════════
🔹 _*WASH STATION - CURE STATION*_ 🔹
Official website ▶ https://bit.ly/3YChxjL
AliExpress ▶ https://bit.ly/416uvrK
Amazon UK ▶ https://amzn.to/3xxmOxa -
Amazon US ▶ https://amzn.to/3YTZTbL - https://amzn.to/3k2Ymkc
🔹 _*3D PRINTS*_ 🔹
*HULK :* Incredible 3D model created by 3D Wicked ▶ https://www.patreon.com/3dWicked
*GOLEM :* Check out Forged 3D here ▶ https://www.myminifactory.com/users/FORG3DMNL / http://forg3dmnl.com
*SUBSCRIBE for more tips, guides and fun projects*
https://youtube.com/@vogman?sub_confirmation=1
🔹 _*MY LINKS*_ 🔹
▶ http://vogman.co.uk
▶ https://www.facebook.com/thevogman
▶ https://instagram.com/the_vogman
▶ https://rumble.com/c/c-2100620
▶ https://vogsmerch.myspreadshop.co.uk
▶ https://etsy.com/uk/shop/VegOilGuy
▶ https://patreon.com/vegoilguy
💚💚💚 *PLEASE SUPPORT THIS CHANNEL* 💚💚💚
The price of a cup of coffee can really help me grow my channel. If you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 https://www.patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 https://www.vegoilguy.co.uk/donations 😁
🔹 _*DISCLAIMER*_ 🔹
This product was given to me, free of charge and without obligation. No money has changed hands and the only agreement made was that I video an INDEPENDENT review, expressing my own personal and above all honest thoughts on the product. The opinions stated are my own, based upon my observations of items I have actually reviewed. I cannot form judgements about items I have not seen.
0:00 - Introduction
0:32 - Unbox
1:02 - Air filters
1:46 - Build plate
1:58 - Levelling
3:20 - Z Arm
3:33 - Resin tray
5:10 - 8K screen
5:36 - Printing dimensions
5:43 - Connectivity
5:53 - Fan noise
6:20 - User Interface
6:36 - Heater
8:33 - Wash Station
9:07 - Curing Station
9:36 - Cost
9:56 - Prints / Slicers
12:18 - My thoughts
#3dprinting #3dprinter #resinprinting #vegoilguy #vog")
![Phrozen Sonic Mega 8KS + wash & cure stations [HONEST REVIEW]](https://i.ytimg.com/vi/jOAovGy1oyI/hqdefault.jpg "Phrozen Sonic Mega 8KS + wash & cure stations [HONEST REVIEW]
An honest look at the REVAMPED extra large Phrozen Sonic Mega 8K 3D resin printer, now known as the 8KS. Equally large and as impressive as its older brother, the new 8KS have one massive difference - price!
At approx. $800 less, Phrozen have made extra large 3D resin printing more accessible.
*PRODUCT LINKS*
Phrozen Sonic Mega 8KS ▶ https://tinyurl.com/5n86xrnh
Amazon UK ▶ https://amzn.to/441bfhs
Amazon US ▶ https://amzn.to/3TYtxuZ
Amazon CA ▶ pending
Amazon FR ▶ pending
Amazon DE ▶ pending
Amazon ES ▶ https://amzn.to/3xzKx3n
Amazon IT ▶ pending
Megs Wash S ▶ https://tinyurl.com/28dccj2u
Mega Cure S ▶ https://tinyurl.com/yc5wpt8m
*USEFUL LINKS*
• *VogMans pick Best Midrange printer* ▶ https://tinyurl.com/3wwkemnk
• *VogMans printer selection guide* ▶ https://tinyurl.com/bddpvud5
• *VogMans recommended equipment list* ▶ https://tinyurl.com/56vyxa73
*VIDEO LINKS*
Phrozen Sonic Mega 8KS Speed Print Video ▶ https://youtu.be/gcolcz31RbQ
Phrozen Sonic Mega 8KS Resin Pump ▶ ( pending )
══════════════════════════════════════════
💚 *V O G M A N S P I C K S* 💚
*Which printer do you need? Click here for help* ▶ http://tinyurl.com/5xfzxvme
_*Best Budget printer*_ ▶ https://tinyurl.com/52ku5vdb
_*Best DLP printer*_ ▶ https://tinyurl.com/43zp5648
_*Best Standard printers*_ ▶ https://tinyurl.com/mr37js37
_*Best Midrange printers*_ ▶ https://tinyurl.com/3wwkemnk
_*Best Large printers*_ ▶ https://tinyurl.com/2p8epxc8
_*Best Resins*_ ▶ https://tinyurl.com/2vp5kcvz
══════════════════════════════════════════
*DISCLAIMER*
These products were given to me, free of charge and without obligation. No money has changed hands and the only agreement made was that I video an INDEPENDENT review, expressing my own personal and above all honest thoughts on the product.
Some of the links on this page may contain affiliate links. Clicking them will generate a few pennies for me _if_ you make a purchase, _but importantly this will not cost you any extra._
💚 *PLEASE SUPPORT THIS CHANNEL* 💚
The price of a cup of coffee can really help me grow my channel. If, and only IF, you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 https://www.patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 https://www.vegoilguy.co.uk/donations 😁
🔹 _*ETSY STORE*_ 🔹
I sell a few castings and 3D designs on Etsy. Proceeds help me maintain my channel.
▶ https://www.etsy.com/uk/shop/VegOilGuy 🛒
🔹 _*MY LINKS*_ 🔹
▶ https://vegoilguy.co.uk
▶ https://vogsmerch.myspreadshop.co.uk
▶ https://instagram.com/vegoilguy
▶ https://facebook.com/groups/vegoilguy
▶ https://etsy.com/uk/shop/VegOilGuy
▶ https://patreon.com/vegoilguy
0:00 Introduction
3:30 Plate levelling
4:14 Drainage hook
4:52 Flip top lid
5:22 Venting
6:00 Resin pump
6:37 Printing
7:30 Fast printing
8:41 Wash Station (Wash Mega S)
10:46 Cure Station (Cure Mega S)
13:08 My thoughts
#3dprinting
#3dresinprinting
#vegoilguy
#vogman #vog")
![PERFECT Exposure times (calibration) - dial in your 3D printer resin [EASY METHOD]](https://i.ytimg.com/vi/jOjB3Fr-0no/hqdefault.jpg "PERFECT Exposure times (calibration) - dial in your 3D printer resin [EASY METHOD]
Prints fail, or they look rubbish, and the usual culprit for that is incorrect Exposure Times. Theres many useful tools to help fix this, including the Phrozen XP Finder which Ill explain here fully, giving a blow by blow demo - along with a few other printing tips 😁
I know its confusing, hunting around for the perfect setting to match your printer. But the truth is that might not help. The best thing to do is tune in the resin to MATCH your printer. Luckily resin calibration is much easier than youd think, and here Ill show you how.
*SUBSCRIBE for more tips, guides and fun projects*
https://youtube.com/@vogman?sub_confirmation=1
*** PHROZEN STL ***
The Phrozen help page has moved here:
https://helpcenter.phrozen3d.com/hc/en-us/articles/6324821843993-How-to-dial-in-any-resin
However, this page has relocated more than once, so if in doubt you can download the file on Thingiverse here:
https://www.thingiverse.com/thing:5436642
*** MAMMOTH FACTORY ***
To see the excellent model I used in the video and many more, visit Mammoth Factory
https://www.instagram.com/mammothfactorygames
https://www.mammothfactorygames.com/
https://www.patreon.com/MammothFactory
*** MEPHISTO BUST ***
Incredible 3D model created by 3D Wicked https://www.patreon.com/3dWicked
🔹 _*MY LINKS*_ 🔹
▶ http://vogman.co.uk
▶ https://www.facebook.com/thevogman
▶ https://instagram.com/the_vogman
▶ https://rumble.com/c/c-2100620
▶ https://vogsmerch.myspreadshop.co.uk
▶ https://etsy.com/uk/shop/VegOilGuy
▶ https://patreon.com/vegoilguy
💚💚💚 *PLEASE SUPPORT THIS CHANNEL* 💚💚💚
The price of a cup of coffee can really help me grow my channel. If you can spare a little, please consider becoming one of my Patrons. You can read more about this here:
🟢 https://www.patreon.com/vegoilguy 😃
Or if you prefer to make a PayPal donation, you can do that here
🟢 https://www.vegoilguy.co.uk/donations 😁
#3dprinting #3dprinter #resinprinting #vegoilguy #vog")
