Well, So Much for Quitting | WoodTalk 581 @WoodTalk
Well, So Much for Quitting | WoodTalk 581  @WoodTalk
Uploaded May 2025 | Updated November 2026, 2 days ago
It’s show #581 - On today’s show, we’re talking about…making stains suck less, cutting angled tenons, and what to do with all that ash? PLUS we have a new sponsor of the show!

Sponsored by You
If you want to help support the show, you can do so by going to Patreon.com/woodtalk and signing up to become a patron of the show.

What's on the Bench
- Marc is building with epoxy!
- Shannon is finishing with a ketchup packet.
- Matt is finishing up kitchen stuff and still sawing stuff too.

Kickback
- Joe reaches back out to us to say his hand plane issues were because of the "friggin' frog" in the wrong place.
- Andy wants to tell us about a new modeling software at Layout.computer that was designed for chair makers but has now added a casework component too.
- Brandon offers the advice of putting an air filter outboard of the intake on his dehumidifier and what a difference it has made.
- Andrew calls in to share his surgeon father's advice about being cut with a dull tool or sharp tool, spoiler alert, "flappy bits" is a technical term.

New Sponsor - Woodcraft!!! Hooray!!!

We reminisce about our early Woodcraft store experiences and the classes we have taken there. We are thrilled to be a part of that journey for other woodworkers and look forward to working with Woodcraft.

Listener Questions
David wants to know why stains suck so much and we try to tell him they don't...and fail. Marc suggests making a blotch control to help with stain absorption.
Steve looks for advice on making angled tenons for a chair using power tools. Angled mortise or angled tenon?
Paul has several Ash logs that were killed by the Ash Borer and asks for advice on what to do with them.
Steve is taking a trip to Japan and wants to know some woodworking related stuff to see. We don't know but want to know so are asking the audience for advice. Write/call in and tell us your suggestions.
Ask Us a Question

Send in questions via the contact form here on site or hit us up on IG at woodtalkshow or send us a voicemail using your phone voice memo app to woodtalkshow@gmail.com

Finally you can find us individually on Instagram at mattcremona, woodwhisperer, and renaissancewoodworker
Well, So Much for Quitting | WoodTalk 581Wood Talk Live StreamWoodworkings MOST Overrated Tool: Joiner Plane vs. Jack Plane #shortsCasa Bonitas Viral Reservation Struggle: Is It Worth It? #shortsShould I Buy a Jointer? | WT616WT379 - Pooping in the Slop SinkShow Us Your Bottom | Wood Talk #559Can AI Change How Woodworkers Design Furniture? | WT618Matt Hates the Environment - 546Its Tiny But Its Better Than Nothing | Wood Talk 606Marcs Helmet Rack Adventure - WT582 #podcast #woodtalkWoodworking Questions Go Off The Rails: More than on the surface
Wood Talk |

Well, So Much for Quitting | WoodTalk 581

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER