Web admin interface of the tp-link Pharos CPE710 @freename
Web admin interface of the tp-link Pharos CPE710  @freename
Uploaded April 2023 | Updated November 2026, 36 minutes ago
The initial setup of a point to point bridge and then a detailed look at what the admin pages look like on the tp-link Pharos CPE710.

See my other videos about the CPE710 / CPE605..
How to factory reset the tp-link CPE710 on the device itself - youtu.be/Qv0GUr4NE_s
How to factory reset the tp-link CPE710 using the PoE injector - youtu.be/t6M6OoMLdCs
Initial assembly and power up of tp-link Pharos CPE710 - youtu.be/wCLZwIdJpxs

00:00 - Intro
00:15 - Setting a static IP on your computer so you can reach the CPE710 for configuration.
01:02 - Initial log in to the router and setting the country and a non-default password.
01:39 - Running through Quick Setup for Access Point device.
04:07 - Running through Quick Setup for the Client device.
04:51 - Testing connectivity over the point to point wireless bridge.
06:02 - Speed test across the wireless bridge (benchmarking).
08:31 - The status screen when in Client mode including Throughput, Stations, Interfaces, ARP Table, Routes and DHCP Clients.
09:02 - Network tab for setting IP Address, DHCP Mode, Gateway, DNS, MTU, IPv6, VLAN and "MAC & IP Binding".
09:52 - Wireless tab for setting Region, WiFi mode, channel width, TX rate, frequency, transmit power limits.
10:33 - Wireless tab for setting SSID, WDS mode, WPA / Security mode and password/passkey.
13:15 - Wireless tab when in Client Mode (see below for AP mode!) for Advanced Wireless Settings. Distance Setting, Beacon Interval, RTS Threshold, Fragmentation Threshold, DTIM Interval, AP Isolation, Short GI, Wi-Fi Multimedia WMM, QoS.
13:28 - Management tab for System Logs, Discovery settings, Ping Watchdog, Dynamic DNS, Web Server, SNMP Agent and SSH Server settings.
15:09 - System tab for Device name, location, language, admin user/pass and time + timezone settings.
15:52 - On device ping diagnostics.
16:07 - On device speed test (iperf), this function appears to have a hard limit likely due to device CPU limitations.
19:27 - Spectrum Analysis mode.
21:27 - Antenna Alignment.
22:34 - The status screen when in Access Point mode including Throughput, Stations, Interfaces, ARP Table, Routes and DHCP Clients.
24:38 - Wireless tab when in Access Pojnt mode (see above for client mode!) including Multi-SSID and MAC Filtering options.
Web admin interface of the tp-link Pharos CPE710How to factory reset Mercusys Halo H70X - On the device using a pinFix stuck headphone jack - HP Pavilion 14-ce0520naLS1005G 5-port Gigabit Switch (Tiny!)How to unplug and plug in a fibre SC connector (Subscriber Connector)The HP OmniBook 800CT - Vintage laptop computer.How to factory reset a tp-link TD-W9970 RouterOptiplex 3240 AIO How to replace or upgrade the hard diskThe two annoying things about my Nissan Leaf (2018 model)The web interface of the BT Whole Home WiFi 088269 / 095663How to replace or upgrade the hard disk in a HP Pavilion 15-cd059saHow to factory reset a TalkTalk Wi-Fi Hub 3
icannotgetafreename |

Web admin interface of the tp-link Pharos CPE710

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER