Web Admin interface of the TP-Link AC1200 Archer C6 Wi-Fi Router. @freename
Web Admin interface of the TP-Link AC1200 Archer C6 Wi-Fi Router.  @freename
Uploaded August 2022 | Updated November 2026, 2 hours ago
Web Admin interface of the TP-Link AC1200 Archer C6 wireless Router / gateway.
Shows the router, its lights, ports, power supply and plugs.
And an in depth look through the web configuration interface. This video might be helpful for someone who has to talk someone else through changing settings. A bookmark of the various sections is below.

01:13 - What is in the box.
01:37 - Status lights on the front of the router.
02:19 - Sticker on the underside showing default wifi password.
02:40 - LAN, WAN, power sockets and reset, WPS button on the back of the router.
03:19 - Power Supply.
03:52 - Instruction Manual
05:00 - Web interface default IP and log on page.
06:33 - Basic settings page showing Internet, WiFi and Mesh status.
08:10 - First time Setup Wizard / Quick Setup.
10:42 - Basic internet settings (Static IP, Dynamic IP, PPPoE, L2TP, PPTP).
11:08 - Basic WiFi Wireless Settings.
11:17 - Guest WiFi settings.
11:49 - Parental Controls.
15:36 - QoS (Quality of Service) settings (Overall bandwidth limiting).
18:16 - Advanced Settings Router Status Page.
18:32 - Advanced Network Internet settings. MTU and WAN hostname. MAC address Cloning / Spoofing. Secondary Connection.
19:48 - LAN IP address and subnet mask settings.
19:58 - DHCP server settings. Address reservations for devices.
20:33 - Dynamic DNS / DDNS / Dyndns / No-IP.org
20:47 - IPTV / VLAN Bridge settings.
21:16 - Static Routes.
21:31 - Router or AP Operation Mode (Set the router to route or be an access point only).
21:54 - Advanced WiFi settings. (Airtime Fairness, WPA settings, transmit power options).
22:15 - Web based WPS triggering and PIN.
22:43 - Wireless Schedule (Turn WiFi off automatically at night etc.).
23:07 - Advanced Guest WiFi settings.
23:44 - Security, Firewall settings. (SPI Firewall, DoS Protection settings. Enable WAN ping.).
24:57 - Access control (MAC Address filtering).
25:41 - IP & MAC Binding (ARP pinning).
26:22 - NAT settings: ALG settings (Application Layer Gateway, SIP, FTP ALG etc.).
26:53 - Port Forwarding (Virtual Servers).
27:55 - Port Triggering.
28:27 - DMZ setting.
29:20 - UPnP options.
30:13 - IPv6 Settings.
30:45 - VPN Server settings. Run an OpenVPN or PPTP VPN server!
32:05 - Alexa Smart Live Assistant.
32:28 - System Tools: Time Settings.
32:51 - LED Schedule / Switch off the status lights.
33:08 - Traceroute and ping diagnostics.
33:14 - Firmware Update.
33:44 - Save and restore router configuration (backup the settings).
34:02 - Automatic reboot schedule.
34:30 - Router Administration settings (change the admin password, enable WAN administration).
35:10 - System Log.
35:22 - Traffic Monitor.
36:14 - System Parameters (WiFi tweaks (RTS, DTIM, WDS, Group Rekey options).
Web Admin interface of the TP-Link AC1200 Archer C6 Wi-Fi Router.A look at the Zyxel DX5301-B2 router.How to factory reset a Soyealink B535-333 (Huawei) 4G WiFi RouterHow to factory reset a Hyperoptic Nokia HA-140W-B router.HP Notebook 17-x047na How to upgrade or replace the hard disk or SSDHow to Factory Reset a IgniteNet SP-W2-AC1200 WiFi access pointWhats inside a cheap Amazon Barcode USB scanner?Replace or upgrade the hard disk in a Lenovo Z50-70 laptopHow to factory reset a Calix GigaCentre 844G-2 GPON router.What is in the TP-Link TL-SG1005LP Gigabit Switch box.What does the USB port on the ZTE MC801A 5G do?How to replace the hard disk in a Lenovo ideapad 300-15ISK
icannotgetafreename |

Web Admin interface of the TP-Link AC1200 Archer C6 Wi-Fi Router.

SHARE TO X SHARE TO REDDIT SHARE TO FACEBOOK WALLPAPER